Ingersoll Rand 121K6 Super Duty Air Hammer with 6-Piece Chisel Kit

• Professional touch trigger for total control
• Long-life tool with a tough one piece alloy barrel
• Easy to maintain, with an "easy out" throttle valve assembly
• Kit includes: a blow molded plastic case with a removable lid and 6 chisels
• Air hammer comes in a blowmolded case with 6 chisels

I had to re-tile some bathroom floors, but ran into a problem. The ceramic tile was apparently put down with an adhesive that was meant to last 100 years. In the first bathroom I used a chisel and hammer to remove the tile by hand which took me a week to get the tile up. There had to be a better way so I bought this air hammer and gave it a try.

I was amazed how fast the tile came up with this tool. It works like a little mini hand-held jackhammer. I was able to remove the tile in just a few hours instead of a week doing it by hand. I am sure this handy little tool has many other uses that I may discover later, but for now I am very happy using it for tile removal.

There is one thing you must be aware of. This tool uses an air compressor. I only had a 1 gallon compressor which is not even close to adequate. I had to buy an 8 gallon and it worked great.

Buy Ingersoll Rand 121K6 Super Duty Air Hammer with 6-Piece Chisel Kit Now

I wanted to chip some granite so I bought a 20 dollar Kobalt Air Hammer. Two shifts of four hours running it non stop pretty much trashed it. No umph left. OK, maybe I should have read the directions and added some lubricant. I did that before the second stint and the oomph was back but not for long. I might rebuild it when I get the spare time.

Meanwhile paid 86 bucks for the Ingersoll Rand and am quite happy. The job I am doing is nonstop brutal hammering of rock. The Kobalt I am sure can handle the light work but this Ingersoll Rand feels like it is going to last. More heft and more power. 4 good turns at the rock and it's still quite peppy. I am oiling this one from the start so this review might not be completely fair to the Kobalt.

Chisels from both fit the new hammer. Now if someone could point me to a chisel that fits this hammer which will not wear out I would be happy. I have to grind a new edge every hour or so and they are getting short.

Read Best Reviews of Ingersoll Rand 121K6 Super Duty Air Hammer with 6-Piece Chisel Kit Here

First let me say I went on the cheap for my first air hammer and learned my lesson. This unit does all the usual things needed for around the home. Remove tile, chip out grout, punch a hole through concrete or concrete blocks, etc etc. It's not over nor under powered for those uses and it's reasonable weight makes using it easy. It doesn't overly vibrate and isn't overly loud during use. It works perfectly with my Makita MAC2400 Big Bore 2.5 HP Air Compressor with no real wait time for compressor recharge time beyond the normal pauses for clearing debris or moving about.

It seems about "just right" for typical home owner use.

UPDATE: After a year of use this hammer is still going strong. used it on an outdoor flagstone patio re-grout. (One of those jobs that looked straightforward but turned into a nightmare) It's spent many many hours removing grout, breaking up decaying concrete base and never once even stuttered. It did break a retaining spring but that's to be expected. One of those few tools that is solidly made and worth the money.

Want Ingersoll Rand 121K6 Super Duty Air Hammer with 6-Piece Chisel Kit Discount?

Nothing special about this. The spring that holds the chisel in broke on first use. Had to wait to use it until I could get a quick connect one on line. Not sure why the company would not include this for the price they are charging. Works adequately, not under powered but not overpowered either. Bought because reviews on this model were good. I guess I would say I do not agree wholeheartly with those folks.

Save 36% Off

I paid the high price for this product specifically to avoid buying a Chinese quality one. I have always used Ingersoll Rand tools in the shop and have had good experiences. When I received the tool, I immediately realized that it was made in China. Within an hour of using it, the bit retainer snapped. It was clearly made from Chinese grade recycled metal. a.k.a. they made it out of metal they got from melting down a used clothes drier with the lint still in it. I took it to a certified IR service center and they didn't have an IR replacement bit retainer, but they were able to give me a speed loader off of a similar brand display model that fit. By the end of the day the chisel I was using jambed in the speed loader. The metal was of such obvious low quality that it had deformed from the force of the tool itself. I used a dremel to trim down edge and got it working again. By the end of the second day the tool starting losing force despite being oiled regularly. I took it apart, cleaned it and got it back up to full speed. By the end of the job on the third day the tool was barely functioning and it didn't matter how much I cleaned it. Upon further inspection I realized that too much air was slipping past the hammer due to wear. Again, probably from cheap metal. I spent more time fixing this tool than actually using it; I should have just gone to Harbor Freight and bought one for $15.