Sandblaster Gun with 3 Extra Nozzles : Sand Blasting Tool

• Wholesale tools
• Includes Three Extra Nozzles
• A perfect accessory for your sandblaster!

Haven't really been able to use as hoped. Have tried on several occasions but before I really get started the nozzle clogs. Using coal slag as the media which is pretty darn fine...but the second you stop the flow of material with stop it backs up and plugs. Air flow settings are key and just haven't found the settings to make it work yet.

Buy Sandblaster Gun with 3 Extra Nozzles : Sand Blasting Tool Now

This is an add-on "dead-man" shut-off valve and nozzle assembly for use with pressure-pot sandblasters like the cheaper ones from Harbor Freight. If you don't already have one of those, this won't be very useful except possibly as a novel paperweight or something to throw into the corner to relieve frustration.

I bought mine at a local tool store; it is the same Pit Bull branded package.

Contrary to what the package says, it comes with 4 extra ceramic nozzles, but no wrench.

The nozzles are 5 different sizes, ranging from about 0.087" diameter to about 0.123". (Take those measurements with a grain of salt... it's not easy to measure them, and the nozzles are tapered inside. They're definitely not all the same size.)

Installation: it screws directly onto the original shutoff valve body after removing the old tip assembly and wrapping some Teflon tape around the threads.

How well does it work? Um, I don't know yet. There's a problem with the motor on my two-cylinder compressor, and when I took the motor apart, more things broke and I discovered that replacement parts are hard to come by. I'll see if I can do some spot blasting with the little compressor, using the smallest diameter tip.

Neiko Heavy Duty Air Needle Scaler with Flux Chisel - 4500 BPM

• The ideal tool for scaling and rust removal
• 4500 blows-per-minute increases work speed
• Comes with 19 high-tension steel needle & flux chisel
• One-year warranty

I bought this tool because of price. It is priced on the low end of the spectrum and this is a tool that I will not use every day. I have used the tool several times and have found no shortcomings or defects. It works as it is supposed to. I'm happy with what I spent and what I got for the money.

Buy Neiko Heavy Duty Air Needle Scaler with Flux Chisel - 4500 BPM Now

This works very good to remover paint, but there is a very big problem with its design. The needles have a nail head that keeps the needles from falling out of the holder. After 2 to 3 hours all the needles start to fall out, because the heads wear off the needles that hold them into the tool.I ordered 5 extra sets of needles and the same thing happened to all 5 sets. So I had to braze a ball of metal on the heads of all the needles to replace the heads that wore off. Then after 2 to 3 hours the brazed heads wore off also and the needles fell out again. Then the return spring broke. If you don't mind having to braze the heads back onto the needles as they fall out this tool works very good, but I talked to other people that had needle scalers and they all said they never had problems with the needles falling out, only that the needles would wear down after so much time. By grinding the needles to a point, they remove the paint allot faster, but the points wear off after about 30 minutes. I would not recommend this tool. Find one that the needles do not fall out of after 2 or 3 hours.

Rockworth RW1504ST 4-Gallon Factory Reconditioned Portable Electric Air Compressor

• 1.5 HP electric engine provides power and consistency
• 155 PSI maximum pressure
• Delivers 2.8 SCFM at 90 PSI to run multiple finish nail guns or 1 framing nail gun
• Twin-stack tank configuration has 2 air outlets for running multiple tools
• Oil-free pump means no maintenance

Well I recently had a job to do and had to pick between a porter cable and this RW1504ST. I looked at em both and this one ran smoother, quieter, and had .2 more CFM's so i went with the Rockworth (Same as the husky at home depot) Yeah its not built like a brick house and franky i dont care if the wheels fall off. It is light enough i can carry it across my yard with no problem. I was using a framing nailer and it did a fine job. When i had a helper setting planks and i was rapid nailing it could usually keep up but a few times it droped below 90lbs. Its a quick lever to drain the tanks individually and the regulator is easy to control. It will keep two different PSI's. One will stay at 155 and the other is the one you set yourself. Extra pressure in the back ground helps it from cycling it every time you use it while keeping a 120psi constant(or what you choose less 155). I see no problem worth noting so far.

Sure a $300 pump may be able to supply a crew of workers but this should be fine for less demanding situations and well worth its weight!!!!

Buy Rockworth RW1504ST 4-Gallon Factory Reconditioned Portable Electric Air Compressor Now

Rockworth in the states is not to common. A little back ground check revealed that Rockworth is sold in the U.K and Europe. In the states it is known as Husky. I read all the reviews and don't know about some of these folks. I have not had my unit to long, but it runs every day all day, no problem as of yet. Packaged real good,after opening and taking unit out,it looked like it just came off the line. No dents,scratches,broken parts or the like. Unit runs good, I use for finish nailer and it sets a 1" crown x 5/8" corrigated fastner. For my face frames. It did have plastic wheels which are round and they do roll.For the $"s spent and what i got, no complaints thus far.Iv'e been in carpenter trade for 50+ yrs. Used all kinds of compressors,from the big boys down to this little guy, and I'm glad i bought this Rockworth.Youall have some fun and be BAD.. Smoothbore00. Just for the record AMAZON price wise and customer follow up beat the H--l out of the big box stores,thats why i check with AMAZON before i spend to much... Just give them one chance you won't be sorry....l

Read Best Reviews of Rockworth RW1504ST 4-Gallon Factory Reconditioned Portable Electric Air Compressor Here

I only have used it to air up tires and air clean equip. but I've had it 6 months and it's worked fine.

bought it as a refurb. so it had some dings on it, but the price was right, came with a full set of accessories

(even though the ad stated no accessories included)so that was a bonus.

refills fast, safety valve and overfill shutoff work. control valves are accurate, fairly light weight.

Loud, so I wear ear plugs. (all these small units are noisy)

As good a unit as I expected to get....no complaints

Want Rockworth RW1504ST 4-Gallon Factory Reconditioned Portable Electric Air Compressor Discount?

This compressor seemed fine at 1st. Then it started acting up and finally conked out after only 3 uses. Never sounded good. I wasn't able to return because too much time passed. Very poor product.

Save 35% Off

This came straight out of a barn put in the box its gross. Refurbished should still mean at least clean the dam thing. Wow Ill never buy refurb from Amazon again. Why not just be honest and say "USED"

Ingersoll Rand 50P 50 Oil Pint

• Class II Lubricant #50 Oil for use with Grinders, Impact Wrenches, Hoists, & Winches, Size - 1PT

Unsure if this is a quality product or not. However, when I received the oil, the label states that the 50P oil is used on 3/4 inch impact wrenches or larger. I bought a IR 2130 impact wrench and Amazon recomends getting the 50P oil. This is wrong. You need to buy the 10P oil for 1/2 inch and smaller impact wrenches. The 50P is too viscous.