Fuji 3003 Q3 PRO Quiet 3-Stage HVLP Spray System

• Quiet, portable, and powerful HVLP turbine and spray gun system
• Professional finish with lacquers, enamels, polyurethane, latex, water-based coatings, and more
• 3-stage HVLP turbine with patented soundproofing design; approximately 6 PSI
• Non-bleed XT spray gun with stay-cool nylon handle and stainless steel fluid passages
• 25-foot highly flexible hose provides increased maneuverability and reach

I recently purchased a Fuji Q3 and it has certainly lived up to my expectations. As a professional painter I finish trim for new houses. I bought a Campbell-Hausfeld HVLP sprayer and it served me fine for small jobs. It was portable but incredibly loud and difficult to set a fine enough spray for varnish. Not so with the Fuji sprayer. I used it for 8 hours straight today and I couldn't be happier. It was easy to adjust the material and pattern and keep a fine enough particle spray to do an excellent job from door casing to full doors. The turbines are also so quiet that I could still hear the radio playing in the background with out having to turn it up. The gun is so light weight that even after a full day of spraying my hand and arm are not tired. I bought and fully recommend the 6 foot whip hose. When needing to manuver the gun into tight spaces or to follow the pattern on a six panel oak door it was nice that I didn't have to drag around the heavier hose. Over all this outfit is first rate and a joy to use. Fuji is to be commended for such a fine product.

Buy Fuji 3003 Q3 PRO Quiet 3-Stage HVLP Spray System Now

I got the Fuji with the hopes of satisfying a large range of projects (and paint types). The Fuji's different nozzle sizes are very helpful for me. Lately, I have been refinishing a 33 foot boat. I have used thick exterior hull paints (epoxy) and thin interior finishes (varnish). It has taken some experimenting to get the right coverage. But, the more I use it the quicker I am able to dial into the right combo or air, value opening and nozzle size.

The compressor is amazingly quiet. My home vacuum is louder. Moving the compressor around (for the boat painting) was easy. It is light and can be set down on uneven ground. I do wish the power switch was a bit bigger or easier to hit. With gloves, mask and glasses on, I sometimes have to search for it while holding the sprayer level in my other hand. This too is getting easier with practice (ya, I know I could hang up the sprayer first, but when you are pushing to get something big painted without a crew, you give up some luxuries).

The spray unit seems to be well built. The spray trigger gives the same response every time which makes getting an even pattern only an operator issue.

Clean up is easy. Just about all surfaces are reachable with a rag so I haven't had too much buildup of crud in hard to reach places. The only 'trick' for my clean-up is getting the nozzle rebuilt with the spring pushing the locking-ball-washer out of alignment before you can screw the nozzle on. Just like the other elements, it is getting easier the more I do it.

I like my Fuji. I can't decide if the cost is good or just okay. But the turbine system is 100 times better than getting a bulky compressor, air tank, 220 volt electrical outlet and low portability pneumatic sprayer.

Read Best Reviews of Fuji 3003 Q3 PRO Quiet 3-Stage HVLP Spray System Here

I justified the cost of this equipment on a commission for 1200 feet of solid cherry baseboard molding and chair rail. It sprayed six coats of various finishes flawlessly. Sanding sealer, alcohol dye, stain, sealing shellac and two coats of water based urethane went on without a hitch.

Since purchasing two months ago, I have also sprayed acrylic latex paint on victorian gingerbread and railings, deck preservative on railings, primers on custom made windows and other various finishes on cabinets. This machine does it all and the other reviews accurately cover the features I like, too.

Thought I would give some tips I've learned using it. Buy the whip hose and mini-cup set. I use one cup for oils, another for alcohol based shellacs and dyes and the last for water finishes. This prevents contamination of non-compatible finishes on the small pieces of furniture I make.

Clean the gun right after use. Lower the cup then squeeze the trigger to get liquid remaining in the gun to drain. Spray solvent through it until clear. Its that simple. Latex paint will build up on the nozzle and can be peeled off while in use but should get a complete cleaning afterward. I unscrew the nozzle and clean it in an ultrasonic cleaner. This is the only finish that seems to require this treatment.

The viscosity reccomendations and cup they provide are right on. Don't use old finish or, if you do, be sure to filter it through 190 micron filters from Home Depot or Lowes. I didn't and plugged the gun but cleared it by spraying solvent through it (got lucky).

For oil and waterbourne finishes leave the air valve on the hose open fully and adjust the amount of fluid at the gun. Alcohol based finishes use slightly less air but not much. If you don't mess around with the air flow you get the hang of the gun performance quickly. There is little overspray even with full air flow.

This gear has exceeded my expectations and the customer service is great. I called to double check on cleaning the gun because it seemed too simple. No "Your call is important", "Press 4", "Press 1" BS but a real live human!

Hope this helps. I am completely happy with this equipment.

Want Fuji 3003 Q3 PRO Quiet 3-Stage HVLP Spray System Discount?

I have always had my furniture professionally sprayed. To save some money, I decided to learn to do this myself. The Fuji rep was very helpful and gave me several suggestions. So far, I've only used it to spray latex paint on a cabinet I made, but it worked great. I'll mostly be using it for spraying lacquer or varnish. I have tinnitus, and am extremely pleased with how quiet the turbine is--no louder than my vacuum cleaner. My only problem is that I live in Indiana and won't be able to use it again until it warms up. I spray outside rather than in my shop. I did purchase the optional flexible whip hose. It makes it easier to manuver the sprayer in tight places. I love my new sprayer.

Save 7% Off

I own an older model Q3 system. I finally broke down and bought the large orifice needle setup from Fuji and this system sprays my laquer perfectly now. I'm a hobbiest cabinet maker and like spraying laquer. I bought the optional cap liner which allows me to angle the gun greatly while spraying without letting the laquer get into places in the gun that you don't want it. The customer support of Fuji spray equipment is the best I've dealt with. I give them two thumbs up. I love that this produces dry air as well. I live in Indiana and if it's warm enough to paint, their is humidity in the air. What a great investment.

24 Professional Air Blow Gun"

• 24" Aluminum extension easily for hard-to-reach areas.
• Soft Rubber Tip does not scratch delicate surfaces

This item is cheap and useless.

1: The tube is flimsy

2: The tip will NOT fit into the end of the tube. The threads on the tip and the threads on the tube don't even match.

I threw this item away just before writing this review.

Buy 24 Professional Air Blow Gun" Now

IT'S GREAT I USE IT EVERY DAY, I WILL BUY FROM AGAIN.

THANK YOU

TONY

Bosch BNS200-18 18-Gauge Brad Nailer

• Tool-less adjustable air exhaust
• Tool-less selectable trigger - easily switch between bump and sequential fire
• Tool-less adjustable depth of drive - adjust depth of drive on tool
• Narrow nose for excellent line of sight and slim body for better line of sight and better control
• In-line self cleaning air filter - keeps debris from the valve and o-ring improving life of tool

Bosch's first foray into the world of nail guns seems pretty successful to me. This gun is light, comfortable, affordable (no fancy "angled" nails required), quiet, and has oodles of power. Even starving it at 80 psi, it has no trouble sinking (and setting) 2" brads into any of the MDF or Poplar stock I've got laying around. The adjustable exhaust port is a nice touch, and it refuses to fire at all once the magazine goes empty. The case is also roomy, leaving ample space for nails and other accessories.

Unfortunately, I can't say it's perfect. The pin that holds the trigger in doesn't seem like it's held on very firmly by that tiny little washer, and I shudder to think what will happen in the event that it should go out. Mine also came with a pretty severe cosmetic flaw in the form of what appears to be a gash in one of the metal surfaces. This gash was painted over, so it's more than likely just a flaw in the casting which should not cause any problems in usage, but still, QA should have caught it. And lastly, they don't give you any kind of fitting to actually stick it on the end of your hose. A minor nitpick to be sure, but come on, how much do these things cost? Don't make me drive back to the store to buy another coupler.

Nevertheless, it gets the job done and gets it done well. Even with the minor cosmetic defect, the fit-and-finish is notably superior to that of the equivalent Hitachi gun which I had been considering before these came out. I think anyone who routinely builds picture frames, cabinetry or puts up moulding would be extremely satisfied with this gun's performance. You'll definitely want to wear goggles, though; the exhaust is unbelievably powerful, so if you forget to rotate the port away from your face, you're going to be crying.

Buy Bosch BNS200-18 18-Gauge Brad Nailer Now

I am doing a full reno of my first floor and put up doorway trim and base molding; this nailer worked flawlessly.

I was using an 18 ga bostitch nailer before, and it was not very consistent. The bosch nailer sunk 2" and 1 1/4" nails at exactly the same depth every time.

I haven't used the bump feature yet, but I'm not sure if I ever will.

I was skeptical at some of the mixed reviews, however, I am not a contractor. There is no doubt that I will be looking at Bosch's finish nailer in the near future.

Read Best Reviews of Bosch BNS200-18 18-Gauge Brad Nailer Here

I have had this nailer for a few weeks now and put it right to work on a project that was awaiting its arrival. First thing I had to do was dial the pressure back to about 80+ using a 1 1/2" nail. Then adjusted the nail set adjuster to get it just right. It cruised through the job (in oak and pine materials) perfectly. It has a well built feel and fit and finish is excellent. Its also very light but I do have it on a urethane hose which helps a lot versus a pvc or rubber one. Thumbs up so far!

Want Bosch BNS200-18 18-Gauge Brad Nailer Discount?

This is the second Bosch 18-guage brad nailer I've purchased, so both of us can do similar jobs at the same time. I have no idea how someone could not be able to drive nails with these; we've been working with ironwood and ipe for about six months and have no problems driving up to and including 2-inch fastners.

The first gun is a bit over a year old and while I am meticulous about tools, it hasn't been babied. Compared to the new gun, it's lost nothing after probably 5000 6000 nails driven at maximum depth settings and maximum operating pressures into the hardest woods. We've had one operator technique jam, and I think the Bosch naileers have the easiest and best jam-clearing of any nailer I've used or tried you don't open the nose, you open the magazine. Wham, you're done.

Yeah, you can buy better 18-guage nailers the Cadex comes to mind for three times this price, and you can buy worse nailers for 50% more than these cost, but for daily use, in the shop, the Bosch nailers have proven to be rock-solid and totally dependable.

And they feel good in your hand.

Save 60% Off

I bought this gun without any knowledge of its performance. I only went with the idea that all the Bosch tools I own have been great. This gun is not what is advertised. It's size nor its weight is not smaller than other 18 ga. guns that I own (Bostich, Porter-Cable, Senco). I was hoping to find an 18 gauge gun that would sink 2" nails consistently. I just finished a job trimming a house with 3/4" pre-finished fir for casing and base. The 18 ga. is used to diminish the size of holes that need to be puttied but if you have to set nails manually with a nail set your nail hole becomes noticeably larger. Not good when doing high-end stain-grade work. The time it takes to constantly set nails manually is not cost effective. I used this gun to trim out one door and put it away after I had to manually set 6 nails. The compressor was set to 115 psi and the depth adjustment on the gun was set to sink nails all the way. The Senco is still the gun I am going to use. It will shoot 2 1/8" nails and rarely leaves them proud. The Bosch looks good but needs some work before I will consider using it.