Hitachi NR83A2 Round Head 2-inch to 3-1/4-inch Framing Nailer

• Round-head 2-inch to 3-1/4-inch framing nailer allows for single or contact actuation
• Tool-free depth adjustment, open-nose design; ANSI compliant
• Stainless steel magazine, comfortable rubber grip
• Includes protective bumpers, safety glasses; no carrying case
• 22 by 13 by 4-inches; 7.9-pounds; 1-year warranty
• Comes with a 5-year limited warranty
• Fires plastic-coated, full-round head nails from 2-inches to 3-1/4-inches
• Rubber grip for superior control and comfort during use
• Selective actuation allows transition from single actuation to contact actuation
• Tool-less depth adjustment provides flexibility when fastening various types of wood

I have had my hitachi NR83A2 for about 3 1/2 years. I have used the NR83, which was a great gun, but who wants to keep going back to the compressor to adjust the air pressure when you can simply adjust the depth on the gun. I have not had any problems with the depth of drive, it works great. And the single fire, bump fire mechanism has never given me any trouble either, in fact, it is very handy to have if you are in a situation where you can't afford to have a double fire. Contrary to a previous review, you can mount a rafter hook on this gun. You just have to drill an extra hole where the magazine bolts to the gun. I got the hook off amazon as well, it is make by toolhangers inc., and it fits NR83A2 and a skilsaw. I have framed with a few other guns, namely the Porter Cable, I have used the Paslode powermaster plus, and I have used the Senco. But most of my experience is with this gun, and I can't see ever changing over. Once you put a rafter hook on it, this gun has it all, and lacks nothing. Only complaint, when you are nailing off with 8s, the 2nd clip will often ride up on the 1st clip, causing a jam, which is annoying when you are trying to go fast. But other than that, no complaints. If you want a true framing gun, get this one. I guarantee you if you walk onto any framing crew out here in California, you will see Hitachi's being used.

Buy Hitachi NR83A2 Round Head 2-inch to 3-1/4-inch Framing Nailer Now

I'm in the middle of building a 10X16 shed with this nailer. I've used it for the rough framing, nailing the sheathing, and framing trusses (lots of toe-nailing). I've had no problems with this tool it does a fine job. I'm using the BC nails available on Amazon 3&1/4 in framers (comes coated) and their 8d ring-shank galvanized for the sheathing.

No regrets about buying this it's saved a world of time!

Read Best Reviews of Hitachi NR83A2 Round Head 2-inch to 3-1/4-inch Framing Nailer Here

We're building a new home and during the framing stage I watched the framers use this gun all day long, day after day with no problems. When I asked them how they liked it, they said they would not use any other gun but this one. We're nearing the end of construction and I decided to tackle the rear deck myself (lots of money to be saved in doing so). I decided to take the plunge and buy my first pneumatic nail gun. I'm not a professional builder, but, I can tell you I do love this Hitachi framer. In fact, I'm so excited about it that I've ordered additional nailers and a stapler to put in my dream shop which is going up at the same time as the house. Actually, the shop is finished something my sweet wife reminds me of each time we visit the building site. I keep telling her "We just have to maintian our priorities!"

Want Hitachi NR83A2 Round Head 2-inch to 3-1/4-inch Framing Nailer Discount?

I have owned this gun for 3 years. I am a professional remodeler and I use this gun 5 days a week. My best friend has owned an older model for 25 years without ever needing service. These guns are indestructable. I have dropped this gun off of roofs, onto concrete, off of ladders. Still works like the day I bought it. Like any nail gun, you have to learn how it works and find it sweet spot. Every gun fires differently. Once you get used to it, it will be second nature. It is best to only put one sleave of nails in at a time, otherwise they tend to get stuck together and cause a jamb. That is the only complaint on this gun, which I think has more to do with how round head nail strips are made. I did accidently shoot myself in the knee with a 16D nail while working alone. Kinda sucked, but it was a stupid mistake I will not make again ;)

Save 53% Off

Beware, the Hitachi NR83A2 and NR83A2(S) are very similar, but the (S) does not have a depth control on the gun. I was surprised when I opened the box at home, after handeling the display model in the store which has the adjuster. Maybe that is what the 'S' stands for >surprise<

As it turns out, I don't find this to be a detriment, since the unit has worked flawlessly driving 12d nails (3.25 inch) at 100psi to 120psi, the range that my compressor cycles between. Neither gun comes with an air fitting, and they require a large one (3/8inch). I bought an (S) model today at my local Lowes hardware store. They have awsome customer service, beating their competition's sale price by 10% which made my price $222.00 plus tax. I had searched for a tool that will drive full head nails consistently, and this tool works flawlessly. I am not a professional carpenter, but I know good quality and sometimes you get lucky and can find it at a decent price. This nailer is worth every cent, and will last a long time. Oh, I almost forgot that Hitachi has a 5 year warranty! I am very pleased with this nailer.