Legacy A73458D Color Connex Type D 14 Piece. 1/4 in. Red Coupler and Plug Kit

• Industrial type D connectors in all red colors
• Allows matching of couplers for dedicated hose applications.
• Push connect easy connect system
• Female and Male couplers are the same color

Have a shop on our farm and constantly using air tools. Was using the cheap chinese connectors but decided to spend a little more money and get some quality ones. Cant go wrong with these. You always know what type you have by looking at the color of them. I bought two packs and changed all my tools over to them. NOTHING leaks air anymore.....

Buy Legacy A73458D Color Connex Type D 14 Piece. 1/4 in. Red Coupler and Plug Kit Now

I've been using the cheap brass couplers (with the rubber o-ring) and fittings for several years and I always found myself fighting with the air tools to get them to connect to the coupler and also had problems with it leaking around the o-ring. It got to the point where I had to lay the air tool down on the ground and had to put my weight on it in order for it to latch into place.

I installed these as soon as they arrived and all I can say is I'm very impressed with quality. There are 4 ball bearings that secure the fitting into the coupler (inside the collar) which makes connecting/disconnecting the air tool a quick and painless process. Also, there are no o-rings you need to worry about tearing and leaking.

I would have given this 5 stars but one of the female couplers was defective which didn't allow the fittings to seat correctly. Amazon offered to send me a replacement kit if I returned it, but I installed all the fittings already so it would be too much of a hassle to replace just the one piece. Overall, it was still worth the purchase.

Read Best Reviews of Legacy A73458D Color Connex Type D 14 Piece. 1/4 in. Red Coupler and Plug Kit Here

We had bought several 14 pc sets and use these in an industrial environment and switch out air tools several times a day on an air line. After about a month we noticed that they started leaking air due to wear on the male coupling. After looking at them they are made of aluminum instead of the steel. They would probably good for the hobby guy that doesnt use air that much, but if you swap out tools on your airline often expect them to wear fast and start leaking air. I We won't be buying them again.

Want Legacy A73458D Color Connex Type D 14 Piece. 1/4 in. Red Coupler and Plug Kit Discount?

I thought I would try this product based on the reviews. So far, the one female coupler end has worked ok when it is plugged in, however, it is leaking when it does not have a male coupler plugged into it. I have not tried all of the fittings in the pack yet...

Save 8% Off

I work with electronics and basic construction projects daily. I have wanted a compressor for years and finally made the jump into buying one. I bought a Husky branded 8-gallon compressor. The unit was affordable and of decent quality. I went with an oil-driven compressor to save on noise pollution.

After building my compressor and breaking it in, I needed to put a few things together. I got some teflon tape, a 50' Craftsman air hose that I got on a deal, and I ordered these fittings. I wanted fittings that were of good quality, and I also wanted my materials to look nice (the compressor is red, the hose is red, these connectors are red).

In terms of pricing, they are fairly expensive. I spend 25% of what I paid for the compressor just to buy these fittings. They're necessary for everything you use, though, so I dove in and bought them.

If you're debating getting this set or the smaller 7pc set, don't hesitate. Buy the 14pc set. In addition to constructing the air hose mentioned above, I needed more connectors for the tools I bought at Harbor Freight (they don't come pre-made). Overall, I have used almost every piece that I bought just to get my basic tool collection ready for use.

Have metric wrenches ready when building your air tools/hoses!

Control Devices CR Series Brass Pressure Relief Valve, 0-100 psi Adjustable Pressure Range, 1/4&#034

This is an adjustable pressure relief valve. It is marked 10-100 (PSI). In my case it regulates down to about 8 PSI. The higher end markings on the device seem pretty close to my gauge, but a bit off on the low end. In reality, you need a pressure gauge to be sure of the pressure it is set to if you need accuracy.

This type of regulator works by venting air from the pressure side to the atmosphere when the air pressure on the pressure side is higher than the setting of the regulator.

For what it is it works fine and I am happy with it for my application.

This type of regulator would normally be used for a relatvely small air pump or compressor of 1/2 HP or less such as used for air brush work or even as an auto tire inflator where the compressor runs continuously when in use. Large tank type compressors use a different approach they use an electrical pressure sensing switch to cycle the motor and a series type pressure regulator for the air output on the output from the tank. The two types are not compatible with each other.

Seems to be of fine quality. Have not undergone pressure yet. Pretty nice for price. Exactly what I expected. Gooood.

Buy Control Devices CR Series Brass Pressure Relief Valve, 0-100 psi Adjustable Pressure Range, 1/4" Now

Old valve was not holding pressure and was useless .

Replacing with this great valve fixed the problem and it works great.

Read Best Reviews of Control Devices CR Series Brass Pressure Relief Valve, 0-100 psi Adjustable Pressure Range, 1/4" Here

Campbell Hausfeld PA1177 3/8-Inch x 25 PVC Air Hose

• Reinforced PVC hose
• Oil and abrasion resistant
• 25 feet long
• Working pressure of 200 PSI
• Brass fittings

I have used this hose with my freeman nailer for a few months now. I haven't had any problems with the material of the hose rupturing or any air leaks from the fittings. This hose for the price seems to be pretty fair. I have paid more for hoses that didn't last very long at all. I really don't think you can go wrong for the price. I would get another if something happened to this one.

Buy Campbell Hausfeld PA1177 3/8-Inch x 25 PVC Air Hose Now

I have owned this hose for yeard, it keeps me from having to drag the compressor around. No problems found with it yet.

Read Best Reviews of Campbell Hausfeld PA1177 3/8-Inch x 25 PVC Air Hose Here

Good quality hose and price for 25 foot length I did not need a 50 foot hose, and do not like the thinner yellow 'coiled' hoses. It arrived in the color blue, versus the black color in the photograph if you want black, may be best indicate it when ordering. Otherwise, a good product for the price.

Want Campbell Hausfeld PA1177 3/8-Inch x 25 PVC Air Hose Discount?

I've had this item for over a month now, and it has been working well. I haven't had any air leakage issues. As is obvious, just be sure to use Teflon tape or some other sealant to properly seal both connectors. I wrapped the tape around the connectors, and tied a couple of knots.

Save 7% Off

The hose was a bit smaller then I expected, that was good because I didn't want a big footprint anyway. It's bright blue so you can see it around the shop or in the yard. The hose appears to be very flexible so it has a great feel when moving around in shop or home. Other reviews says it handles cold well and doesn't stiffen up like some hoses, this appears to be true because it has been very cold here and it came right out of the box flexible and NOT so ready to use. Before using the hose you must purchase the male and female ends for the hose. To the sellers defense the pictures show the hose without the attachments. Only because the hose should come with the connectors with all due respect, I will give what would be five stars only three. outside the quick-release connectors this is a five star product for sure.

Hitachi NR83A2 Round Head 2-inch to 3-1/4-inch Framing Nailer

• Round-head 2-inch to 3-1/4-inch framing nailer allows for single or contact actuation
• Tool-free depth adjustment, open-nose design; ANSI compliant
• Stainless steel magazine, comfortable rubber grip
• Includes protective bumpers, safety glasses; no carrying case
• 22 by 13 by 4-inches; 7.9-pounds; 1-year warranty
• Comes with a 5-year limited warranty
• Fires plastic-coated, full-round head nails from 2-inches to 3-1/4-inches
• Rubber grip for superior control and comfort during use
• Selective actuation allows transition from single actuation to contact actuation
• Tool-less depth adjustment provides flexibility when fastening various types of wood

I have had my hitachi NR83A2 for about 3 1/2 years. I have used the NR83, which was a great gun, but who wants to keep going back to the compressor to adjust the air pressure when you can simply adjust the depth on the gun. I have not had any problems with the depth of drive, it works great. And the single fire, bump fire mechanism has never given me any trouble either, in fact, it is very handy to have if you are in a situation where you can't afford to have a double fire. Contrary to a previous review, you can mount a rafter hook on this gun. You just have to drill an extra hole where the magazine bolts to the gun. I got the hook off amazon as well, it is make by toolhangers inc., and it fits NR83A2 and a skilsaw. I have framed with a few other guns, namely the Porter Cable, I have used the Paslode powermaster plus, and I have used the Senco. But most of my experience is with this gun, and I can't see ever changing over. Once you put a rafter hook on it, this gun has it all, and lacks nothing. Only complaint, when you are nailing off with 8s, the 2nd clip will often ride up on the 1st clip, causing a jam, which is annoying when you are trying to go fast. But other than that, no complaints. If you want a true framing gun, get this one. I guarantee you if you walk onto any framing crew out here in California, you will see Hitachi's being used.

Buy Hitachi NR83A2 Round Head 2-inch to 3-1/4-inch Framing Nailer Now

I'm in the middle of building a 10X16 shed with this nailer. I've used it for the rough framing, nailing the sheathing, and framing trusses (lots of toe-nailing). I've had no problems with this tool it does a fine job. I'm using the BC nails available on Amazon 3&1/4 in framers (comes coated) and their 8d ring-shank galvanized for the sheathing.

No regrets about buying this it's saved a world of time!

Read Best Reviews of Hitachi NR83A2 Round Head 2-inch to 3-1/4-inch Framing Nailer Here

We're building a new home and during the framing stage I watched the framers use this gun all day long, day after day with no problems. When I asked them how they liked it, they said they would not use any other gun but this one. We're nearing the end of construction and I decided to tackle the rear deck myself (lots of money to be saved in doing so). I decided to take the plunge and buy my first pneumatic nail gun. I'm not a professional builder, but, I can tell you I do love this Hitachi framer. In fact, I'm so excited about it that I've ordered additional nailers and a stapler to put in my dream shop which is going up at the same time as the house. Actually, the shop is finished something my sweet wife reminds me of each time we visit the building site. I keep telling her "We just have to maintian our priorities!"

Want Hitachi NR83A2 Round Head 2-inch to 3-1/4-inch Framing Nailer Discount?

I have owned this gun for 3 years. I am a professional remodeler and I use this gun 5 days a week. My best friend has owned an older model for 25 years without ever needing service. These guns are indestructable. I have dropped this gun off of roofs, onto concrete, off of ladders. Still works like the day I bought it. Like any nail gun, you have to learn how it works and find it sweet spot. Every gun fires differently. Once you get used to it, it will be second nature. It is best to only put one sleave of nails in at a time, otherwise they tend to get stuck together and cause a jamb. That is the only complaint on this gun, which I think has more to do with how round head nail strips are made. I did accidently shoot myself in the knee with a 16D nail while working alone. Kinda sucked, but it was a stupid mistake I will not make again ;)

Save 53% Off

Beware, the Hitachi NR83A2 and NR83A2(S) are very similar, but the (S) does not have a depth control on the gun. I was surprised when I opened the box at home, after handeling the display model in the store which has the adjuster. Maybe that is what the 'S' stands for >surprise<

As it turns out, I don't find this to be a detriment, since the unit has worked flawlessly driving 12d nails (3.25 inch) at 100psi to 120psi, the range that my compressor cycles between. Neither gun comes with an air fitting, and they require a large one (3/8inch). I bought an (S) model today at my local Lowes hardware store. They have awsome customer service, beating their competition's sale price by 10% which made my price $222.00 plus tax. I had searched for a tool that will drive full head nails consistently, and this tool works flawlessly. I am not a professional carpenter, but I know good quality and sometimes you get lucky and can find it at a decent price. This nailer is worth every cent, and will last a long time. Oh, I almost forgot that Hitachi has a 5 year warranty! I am very pleased with this nailer.