Paslode 900420 Cordless IMCT Framing Nailer

• Compatible with Full & Clipped Head 2-inch to 3-1/4-inch nails
• Depth-of-drive adjustment; high-visibility load magazine; long, narrow nose
• Comfortable "sure grip" and soft trigger
• Includes battery, charger, belt hanger, plastic carrying case, safety goggles; optional fuel cell not included
• 12 inches; 7.4 pounds with battery; 5-year warranty

When me and my brother in law decided to build my house, I started looking for something to help us out. Neither one of us ever owned any kind of nail gun or phneumatic tools. I asked around and read the reviews on your web site. I went to LOWE's and Home Depot to get a closer look at all of the various guns. I decided to try the Paslode Impulse, so I bought one for each of us. I saved... on both by getting them from Amazon. These things are great. I even dropped one twice, once about 6' on a sidewalk. Never missed a beat. They are practically maintence free. Even though they didn't need it I cleaned them once just to make me feel good. The breakdown and cleaning was a snap. They sure made the job go faster and saved a lot of wear and tear on our arms. Not having air hoses laying all around was a big plus. I strongly recommend the Paslode Impulse. I even used the generic nails with no problems.

Buy Paslode 900420 Cordless IMCT Framing Nailer Now

I work with a company who employs over 100 union carpenters. We have used Paslode Air tools for the last 8 years with great reliability. The impulse framing nailer, however, certainly had its share of problems until Paslode came out with the improvements in last year,s model. The over-heating and freezing is no longer a problem. Paslode has made this product good enough for us to rely on everyday under extreme conditions. Keep in mind: this tool does require routine maintenance which takes very little time, but it must be done for the gun to function properly and last. Bottom line, if you are interested in an nail gun with convenience and reliability this really is the one. (I do not sell these things...they make us money.)

Read Best Reviews of Paslode 900420 Cordless IMCT Framing Nailer Here

We have never found any tool as helpful as this cordless nail gun. It cut down our project times by more than half and saved my hands and wrists from pain (carpel tunel sufferer). Purchasing this was far more economical than purchasing a nail gun, compressor etc, where we would not use the compressor with anything else except for the nail gun. It doesn't take up a lot of storage room and its great not having to worry about triping over hoses or cords. We haven't had any problems with it and haven't had any jams in the 2 cases of nails we've gone through so far. This is a real timesaver!

Want Paslode 900420 Cordless IMCT Framing Nailer Discount?

We've used Paslode Impulse Nailers for our framing crew since they first came out. We still have some of our first guns, from nearly ten years ago. Our crew is not easy on tools, so the tools have not been babied. The newer guns are not as good and the service sometimes leaves a lot to be desired. When I have complained to the reps I'm told that the tool is not for everyday framing, just for occasional use where pnuematic tools are inconvienent. This is what the retailers don't tell you when you buy them. They are not supposed to be a primary tool -but that's how we use them anyway. We've learned to implement most repairs and cleaning on the job. It would be nice if Paslode would make the guns so they SHOULD be the primary tool.

I've had my Paslode for about a year and a half now. I have to say,"I'm pleased." It's great for small jobs. If I know I'just building a few walls or something else that's only going to take a few minutes I go straight for the orange case and get this baby out. Why ? It has plenty of power to sink nails in new lumber. You might have a little trouble every now and then in old dry studs but you can always finish beating the nail in with a hammer. It doesn't happen very often.The time saved in not lugging a compressor and hoses around is priceless.They designed it so that it won't dry fire when you are out of nails which I wish everyone did. One thing I don't like is you can't bump fire the thing. You have to have the nose safety engaged and then pull the trigger. Then for safety you have to let off the trigger and place the nose again and pull the trigger. At least it's impossible to double fire. Another thing is that it doesn't hold much more than one clip of nails so you have to reload often. For these reasons I don't use it for anything that's going to take more than an hour. If I have a lot of nailing to do I want to be able to hold the trigger and bump fire the nails. It's so much faster. It's not as safe but much more productive. For remodels and pick up work ,this gun is great. For framing a house this is not the right tool. You need a pneumatic nailer and lots of hose. When mine decides to quit or it walks off a job site I will definitely replace it.It's just too handy to be with out.