Interstate Pneumatics G2111-160 2 Inch160 PSI - 1/8 Inch NPT Rear Mount Pressure Gauge

• Dial Diameter: 2"
• Delivery PSI: 0-160
• Inlet Thread: 1/8" NPT
• Mounting Type: Bottom Mount

I have a 20+ year old Topeak Joe Blow bike pump. It's the "public-use" pump I bring to the many bike clinics I do as a volunteer over the years. Thousands of bikes, car tires, kids balls and sports equipment 2 decades and constant abuse and the pump had never failed ... until the gauge started to leak about a year ago. In the last couple of months, the rubberized cover popped up suddenly at 100 psi a couple of times and once nearly smacked me in the cheek. So I took apart the gauge assembly and found the zinc cast threaded 1/8th NPT nipple had cracked. That was the source of the leak. There was insufficient thread left to keep the gauge screwed in. So I ordered this inexpensive Interstate Pneumatics gauge and it had better housing attachment and better machined metal on the base and was more than accurate enough for my bike tires. Even the old rubber housing around the old bike pump gauge fit just right around this new gauge. Now my old friendly pump is back in service.

Paslode 900420 Cordless IMCT Framing Nailer

• Compatible with Full & Clipped Head 2-inch to 3-1/4-inch nails
• Depth-of-drive adjustment; high-visibility load magazine; long, narrow nose
• Comfortable "sure grip" and soft trigger
• Includes battery, charger, belt hanger, plastic carrying case, safety goggles; optional fuel cell not included
• 12 inches; 7.4 pounds with battery; 5-year warranty

When me and my brother in law decided to build my house, I started looking for something to help us out. Neither one of us ever owned any kind of nail gun or phneumatic tools. I asked around and read the reviews on your web site. I went to LOWE's and Home Depot to get a closer look at all of the various guns. I decided to try the Paslode Impulse, so I bought one for each of us. I saved... on both by getting them from Amazon. These things are great. I even dropped one twice, once about 6' on a sidewalk. Never missed a beat. They are practically maintence free. Even though they didn't need it I cleaned them once just to make me feel good. The breakdown and cleaning was a snap. They sure made the job go faster and saved a lot of wear and tear on our arms. Not having air hoses laying all around was a big plus. I strongly recommend the Paslode Impulse. I even used the generic nails with no problems.

Buy Paslode 900420 Cordless IMCT Framing Nailer Now

I work with a company who employs over 100 union carpenters. We have used Paslode Air tools for the last 8 years with great reliability. The impulse framing nailer, however, certainly had its share of problems until Paslode came out with the improvements in last year,s model. The over-heating and freezing is no longer a problem. Paslode has made this product good enough for us to rely on everyday under extreme conditions. Keep in mind: this tool does require routine maintenance which takes very little time, but it must be done for the gun to function properly and last. Bottom line, if you are interested in an nail gun with convenience and reliability this really is the one. (I do not sell these things...they make us money.)

Read Best Reviews of Paslode 900420 Cordless IMCT Framing Nailer Here

We have never found any tool as helpful as this cordless nail gun. It cut down our project times by more than half and saved my hands and wrists from pain (carpel tunel sufferer). Purchasing this was far more economical than purchasing a nail gun, compressor etc, where we would not use the compressor with anything else except for the nail gun. It doesn't take up a lot of storage room and its great not having to worry about triping over hoses or cords. We haven't had any problems with it and haven't had any jams in the 2 cases of nails we've gone through so far. This is a real timesaver!

Want Paslode 900420 Cordless IMCT Framing Nailer Discount?

We've used Paslode Impulse Nailers for our framing crew since they first came out. We still have some of our first guns, from nearly ten years ago. Our crew is not easy on tools, so the tools have not been babied. The newer guns are not as good and the service sometimes leaves a lot to be desired. When I have complained to the reps I'm told that the tool is not for everyday framing, just for occasional use where pnuematic tools are inconvienent. This is what the retailers don't tell you when you buy them. They are not supposed to be a primary tool -but that's how we use them anyway. We've learned to implement most repairs and cleaning on the job. It would be nice if Paslode would make the guns so they SHOULD be the primary tool.

I've had my Paslode for about a year and a half now. I have to say,"I'm pleased." It's great for small jobs. If I know I'just building a few walls or something else that's only going to take a few minutes I go straight for the orange case and get this baby out. Why ? It has plenty of power to sink nails in new lumber. You might have a little trouble every now and then in old dry studs but you can always finish beating the nail in with a hammer. It doesn't happen very often.The time saved in not lugging a compressor and hoses around is priceless.They designed it so that it won't dry fire when you are out of nails which I wish everyone did. One thing I don't like is you can't bump fire the thing. You have to have the nose safety engaged and then pull the trigger. Then for safety you have to let off the trigger and place the nose again and pull the trigger. At least it's impossible to double fire. Another thing is that it doesn't hold much more than one clip of nails so you have to reload often. For these reasons I don't use it for anything that's going to take more than an hour. If I have a lot of nailing to do I want to be able to hold the trigger and bump fire the nails. It's so much faster. It's not as safe but much more productive. For remodels and pick up work ,this gun is great. For framing a house this is not the right tool. You need a pneumatic nailer and lots of hose. When mine decides to quit or it walks off a job site I will definitely replace it.It's just too handy to be with out.

New In tank Check valve for air compressor 3/4" comp x 3/4" mpt

• 3/4" Compression Top X 3/4 Male pipe thread intank -
• Free Shipping

I used this valve on a 5 HP air coompressor and it worked great. The old valve would trip the 220 breaker on the top end while compressor was pumping high pressure. No problem with this valve

Save 53% Off

Sharpe 880A Air Control Filter, Model# 880A

• Regulator with 160-lb. inverted gauge and air cock
• Filtered main line outlet
• Additional regulated outlet
• 5 micron filtration
• 1/2in. inlet; 1/4in. outlet

I searched for quite a while to find a filter/regulator capable of handling 175+ PSI and was glad to find this unit in my price range. Amazon clearly states it will handle 200 PSI Max however upon reading the instructions that came with it, it claims to only max out at 160 PSI. I am disappointed to say the least.

Save 25% Off

Forney 75581 Regulator, Full Size Air Line, 3/8-Inch Female NPT Ports

• Full-Size regulator with 3/8-Inch NPT
• 80 cubic feet per minute (CFM) at 250 PSI, 5 to 150 PSI
• Secondary aspiration plus balanced valve provides quick response and accurate pressure regulation
• Rolling diaphragm for extended life
• Removable non-rising knob for panel mounting and tamper resistance

I'm using it as a drop down between 2 other regulators to protect my plasma cutters internal regulator from my shop air being cranked up to high. Works 100% perfect for that. Probably works great as typical regulator, but I can't say for sure.

Save 26% Off

Tirolessa USA Stucco Sprayer

• Fast and easy application of stucco, mortar and plaster
• Two sets of changeable jets to match your compressor
• Nearly one gallon hopper capacity
• Jet cleaning tools included
• Non-rusting, extremely durable hopper

The tool splattered out gobs that were too big for the 1/8 inch coat required for surface bonding cement. It also dribbled a lot of the product.

Buy Tirolessa USA Stucco Sprayer Now

This is the easy and fast way to apply stucco.

Using the sprayer I can install more stucco than using hawk and towel alone.

Read Best Reviews of Tirolessa USA Stucco Sprayer Here

Great looking product as in videos....I've yet to use it. When I do I will video it and send you a copy. Thanks.

Wolo Model 400 Airmite 2 Horn air horn kit - 12 Volt

• Two (2) durable red plastic trumpets
• Air powered and very loud
• New compact chrome plated compressor which is maintenance free
• Longest Trumpet is 8-1/2 inches
• Kit includes relay, hose and mounting hardware

Well you get what you pay for and paying only bucks for an air horn was not a lot. This horn is not what I expected. Lately it appears there a lot of drivers on the road that must have gotten their licenses on line somewhere or via mail order. People are driving 20 mph "below" the posted speed limits. I want a horn that when I hit the switch the reason I hit the switch gets out of my way ... with no hesitation! This thing sounds weak. My wife said it sounds like a sissy horn? I'm putting together the details of an air train horn hook up. I'm looking at spending 200+ so it better be 10 times louder. I did have a small problem with the way I was hooking it up and telephoned Wolo. After only a couple of minutes I actually "spoke" to a gut that really helped me.

Buy Wolo Model 400 Airmite 2 Horn air horn kit - 12 Volt Now

LOUD! I am tired of morons that know they cannot mulitask, but still insist on talking or texting on their cell phone while driving, especially in TRAFFIC!!! MORONS!! Anyway, when you are your cell phone and you about shit your pants because you hear this, than you need to stop what you are doing and pay attention at your primary objective; driving a car! This is perfect loud, not to extreme and not too quiet like oem horns. This gets peoples attention and thats all i need it for. I don't abuse it, but i sure use it a lot. I have been through a few vehicles, only because of moron drivers not paying attention to what they are driving, like an automobile and crahsing into my car causing it to either be no driveable or insurance, my own insurance comapny screwing me over on the value of the vehicle. Now, with that said, these horns straighten drivers out to pay attention. Install it just right and it will work. Keep in mind 20 amp fuse. You can use the same horn configuration, just need to change the fuse from a 10a to a 20a and it will work.

Read Best Reviews of Wolo Model 400 Airmite 2 Horn air horn kit - 12 Volt Here

Great horn for my little car. Now the big lifted F350s will hear me when they try to merge into me