DEWALT D55141FNBN 16-Gauge Finish Nailer/18-Gauge Brad Nailer/Compressor Combo Kit

• 2.0 SCFM delivered at90 PSI pump, 2.0 gallon tank and 150 max PSI enables more nails to be fired and provides quicker recovery
• Lightweight (30 lbs), thin (10.5-inch) and compact design is easy to carry and store
• 79 dBA operational noise level for a quieter work environment
• Roll cage and control panel provide protection to key compressor components
• Durable oil free pump provides extended maintenance-free operation;Low 8 amp draw motor provides easy start-up and reduces breaker tripping

I bought the nailer to install 3/4 inch wood flooring. Using the 16 gauge nailer, I was able to fire 2 inch brads throught the tongue of african rosewood flooring. A flooring nailer is recommended for this job but I was able to accurately hit the sweet spot above the tongue every time. African rosewood is much harder than oak and the nailer handled the job without a problem. I also like the versatility of having the 18 gauge nailer which I used to shoot 1-1/2 inch brads through quarter round molding. This unit is light weight but has plenty of power. For $300, it is well worth the price.

Buy DEWALT D55141FNBN 16-Gauge Finish Nailer/18-Gauge Brad Nailer/Compressor Combo Kit Now

I do a lot of drywall repair and re-texturing of ceilings & wall areas. I had to replace my old compressor which weighed 50 lbs and was looking for something easier to carry. This compressor works fine, is easy to carry but does run low on compression sometimes because of the small tank. This has not been a problem for me because it does recover quite quickly. I have really enjoyed the compressor in my day to day work and have also used both nail guns on a couple of projects. They worked well and made my jobs so much easier. I am really glad that I made the purchase.

Read Best Reviews of DEWALT D55141FNBN 16-Gauge Finish Nailer/18-Gauge Brad Nailer/Compressor Combo Kit Here

This is my first air compressor but I have had the privilege of using many different portable air compressors (most of them Porter Cable) and this is my favorite. I originally bought this set with general carpentry projects in mind, and I am very glad I did.

Air Compressor Pros:

1. Fills quickly.

2. 2 hose connections are very helpful

3. Metal plate on top protects the motor.

4. Stands up on back for storage so it takes up less floor space.

5. My favorite drain valve I have ever seen on any compressor.

6. Easy to carry.

7. Good placement of power switch on the back.

Air Compressor Cons:

1. 2 Gallon air tank does not allow for much storage.

2. CFM rate is not high enough to use a spray gun for more than short bursts.

Nail Gun Pros:

1. Both nail guns have easy built in safety locks above the triggers.

2. Biggest finish nailer I have ever seen come in an air compressor set.

3. Finish nailer has a good belt clip.

4. The finish nailer once got pulled off my belt and fell onto concrete pavers and did not get a single scratch.

Nail Gun Cons:

1. When you first get the guns they do not come with the hose connectors installed. (They do come with the connectors and Teflon tape but you must put them in.) To protect the guns from any particles falling into them, the guns come with plastic inserts which are almost impossible to remove.

2. The trigger bump on the brad nailer gets jammed in the upright position sometimes.

Accessories:

It came with two accessories I was not aware of at the time of purchase. A single bag big enough for both nailers, the 25' hose included, gun oil, and boxes of nails. It also came with very cheep feeling safety goggles, DPG54M-1D. It did NOT come with gun oil, so to my surprise I had to make a quick trip to the local home depot and buy a $2ish bottle of oil. Also included are the 25' air hose and a bump action trigger (Which I have not used yet).

Other Notes:

1. As you should realize, this kit does NOT come with a staple gun. That can be problematic in some furniture building, especially when applying lewan backing.

2. I bought a 50' hose so I could have two tools attached at the same time and it really comes in handy.

3. You will also want an air gun. They are great for cleaning off sawdust. Also, as I discovered in PC support at school, the air guns are great for cleaning out 8 years of dust from computers.

Want DEWALT D55141FNBN 16-Gauge Finish Nailer/18-Gauge Brad Nailer/Compressor Combo Kit Discount?

Im a contractor so the four things i loved about this set in order , what a great price with shipping was still $40 cheaper than homx depox , its so light at 30 lbs , the roll cage made me feel like it was solid and wont get hurt in my truck , its quiet (this was # 4 because its quieter than all oil less compressors ) but its not as quiet as i hoped still great but needs explaning. the sound level is like this if its in the same room you are in it will bug you in 5 min. you can still talk to the guy next to you with only a small raise in your voice, but within minutes the sound will bug you. placed in the next room it was great, no sound problems. also the sound it makes is not a annoying sound like the porter cable pancake(2/3 times louder) (porter put out more air and holds more air so if you need a comp for more than nail gunning the porter is a better option )to me the sound level was about that of a loud vaccumme cleaner which is very good for a compressor hope this helps 5 stars because not perfect but for the money you get SO MUCH. only rated for 500 hrs (bummer)

Save 44% Off

I'm not a pro, so I considered purchasing a much cheaper compressor and nail gun to install some trim in my home. I'm glad I decided to spend the extra money for this tool. It's made installing the trim a breeze. I'm looking forward to tackling new projects using this, and it's made me a believer in DeWalt products.