BADBOY Blasters BB200D (125 LBS MEDIA CAPACITY) TORNADO SERIES SODA/ABRASIVE PRESSURE POT BLASTER

• DEAD MAN GUN FOR SAFE OPERATION W/4 NOZZLES
• BLASTING HOOD
• SOLID RUBBER WHEELS
• BUILT IN WATER TRAP
• 16 FT BLASTING HOSE

The blaster works great. A few practices that need to be followed with any blaster are clean dry media and dry air. The water trap included seems to work fine. A strainer or screen to make sure all the media is able to pass through the nozzle. I like the top that allows easy filling.

Cons: Only real complaints are the hard to understand assembly instructions, the hood which tends to fog up easily and the required O-ring in the nozzle which can be lost or misplaced when clearing a clog from the nozzle.

DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer K

• Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
• Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
• Contact Trip Lock-Off allows trigger to be disabled when not in use
• Integrated LED lights for long life and durability;Top cap is impact resistant and easy to remove for troubleshooting

No, I am NOT a pro finish guy--former pro-painter guy. I have remodeled about half my house so far, so I would most likely just be a DIY guy. HOWEVER, my experience with interior painting on high-end, high-production tract home projects has made me expert in making the finished product look great no matter what (even though the popular phrase around the jobsite was "the painters will fix it").

Just picked the nailer up August 31st from H.D...

First impressions: This thing is freakin' heavy! I compared it to my Senco FramePro 702XP framing nailer (with 1 stick of 3 1/2 nails in it) and they weigh the same (about 8 pounds). My neighbor has a Senco AirFree cordless nailer, it feels like a toy in comparison to the DeWalt.

Pro's:

* Cordless! Don't have to drag out the air compressor.

* Cool headlights. Good for doing trim in darker areas.

* Shoots 16 gauge angled stick nails (Paslode nails were all I could find to fit at H.D.) Used for crown, casing, base and quarter-round shoe molding--made small, tight holes, no problems.

* Accurate electronic depth adjustment. 1-6 range, 6 setting will just countersink in 3/4 oak

* Bump-firing! Unlike Senco AirFree, you can set the DeWalt to single fire or bump. When on bump mode, it drives at a consistent depth. The motor spools up when you press the trigger, and then bam, bam, bam

* Good grip. Feels like typical DeWalt grip. Stays in you hand while sweaty, quality trigger feel.

* Spare battery. Good Dewalt charger, quality carrying case (with steel buckles instead of plastic)

Cons

* Porky. Not just heavy, but the head of the unit is kinda fat, it has a belt clip, which you have to use, because you can't park it in your bags. It does work OK with a Monster Hook, so no big whoop. It will also nail shoe molding just fine while upside-down.

* Yellow headlights. I know yellow is DeWalt's thing, but white would have been better.

* Price. $400.00 is a good chunk of cash.

Overall, great result for a first-time release. Absolutely SPANKS the Senco AirFree--then sends it to bed without dinner.

Buy DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer K Now

Just bought this tool in sept. and used it to frame several door jambs and casing. it works good. a little heavy, but a lot lighter than a compressor, hose etc. if you buy the angle gun the price of the nails are about 50% more than if you buy the other dewalt straight nailer. because at hd you can buy paslode nails for this angle gun or with the straight gun you can buy senco or porter cable nails. however the angle nailer is better for reaching into corners. As with most dewalt tools you have to use them for 15-30 days to make sure they do not fall apart or break down. but so far I recommend this gun. GUN UPDATE:>12-1-04: IT WORKS GREAT!. have done several jobs no compressors or hoses, entire house molding, casing and the gun works great. no hassels with hoses and watching out so nothing gets knocked over. I have used this gun now for 90 days and have had great success. good job dewalt.

Read Best Reviews of DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer K Here

This tool is solid and works as advertised. So it weighs 8.5 lbs... if you are going to be nailing over your head for hours straight then break out the air hose. I did the same when using my Paslode.

This tool replaced my Paslode Impulse Finish nailer. I've not looked back. Ample power and drives nails well with very predictable depth control.

Get the angled nailer, easier to place and nail in tighter spots. With the size of the gun, you'll need it.

If you are looking for the possible negatives...

Somewhat costly to purchase

It is heavy, but the tool compensates me for this with performance and convenience

I miss being able to sit the tool down on the front face like the Paslode. The Dewalt rolls over sideways if you try. This makes it difficult to set it down and retrieve from the floor or a ladder shelf. I glued rubber feet to the front, problem solved.

If doing production, long nails, hard wood... keep batteries ready to go. I find I can run 3 clips of 2 1/2" if attaching solid oak face trim. For regular use and 1 1/2" nails I get 5 to 6 clips through it.

Don't use the belt clip unless you are trying to remove your pants.

High profile theft item, bright yellow, easy to lay about, high dollar value... watch it close or you'll be buying a second one real soon. (Soap Box Thieves should have a finger removed for each item they steal until they learn or can't pick anything up anymore. Seems fair, 10 chances and all.)

Rather large for tight spots, but amazingly it can get places I would have said it couldn't.

Now, for those that own a selection of 18V tools, consider the kit purchase comes with two batteries... buying two batteries is $100. (you get a 3rd if you buy soon) For me, that's a $100 credit toward the purchase of the gun.

Buy it, enjoy it.

Want DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer K Discount?

First, I'll start by saying that I already owned a few DeWalt 18v products, and I have been very pleased with them. I was so tired of carrying around a 75 lb compressor and hose for mid-size trim jobs that I started looking cordless. I'm sure the Passlode is a nice tool, but I already own 18v DeWalt batteries, and I didn't want to deal with the Passlode fuel cells and batteries.

Now, for the performance this does just as good a job as my DeWalt and PC pneumatic finish nailers. It can sink nails through 1x oak baseboard, through a sheet of plywood and into a stud, and do in with excellent depth consistency. It's not going to replace my pneumatics on a large job, as one battery lasts about 4 clips of nails. It was great for putting up chair rail in the last basement I finished, but if I were trimming an entire house, it would be time to break out the compressor and hoses.

A bonus I find myself using this for my woodworking projects as well. I can set the depth to leave the nail proud of the surface, and tack items together for gluing. This lets me setup my work without struggling to hold the work and the clamps. Fire a few nails, set down the work and then get the clamps.

I have only two small complaints:

One is battery life. It may not be possible to improve it, given all that this gun has to do (I wouldn't give up the work lights for battery life!), so it may be a reasonable compromise, but four clips of nails is not a whole lot. Plan on needing 3 batteries for continuous use.

Second is price. I think the price of the gun is a little steep. My wife gave it to me as a gift, so I can't complain too much I'd been eyeing it for some time, but couldn't justify the price.

I don't rate many things with five stars, as there is always room for improvement. Four stars, however, is a rating to me that means I'd spend my own money on it again.

UPDATE:

I replaced my batteries with new XRP's, replacing some old XR+'s. I now rate this as five stars! It's not the gun eating batteries, mine were worn out. I did a 2000 sq ft house on 2 batteries. Wow.

Save 13% Off

I just bought this about 2 weeks ago, so I can't attest to its durability, but this is the best investment I have made in ages. I did drop from a ladder onto concrete, with no problems. I used this to hang a prehung exterior door and put down some shoe molding last week and it was great. I assumed that I would have to wait for it to charge a spring or something before I could shoot a nail, but it's ready to go as soon as you pick it up. When you pick it up and just feather the trigger, two little work lights come on and the motor spins up and it will shoot nails as fast as you pull the trigger. As with all nail guns, it won't shoot until you press the shoe against the wood. It also has a bump-firing mode where you can hold the trigger in and it will shoot a nail every time you bump it. It uses the Paslode 22 deg. nails from 1¼ -2½ . The 2 1/2" nails are great for large trim. I used them to tie doorjambs to the studs. Seems to shoot a zillion nails on a single battery. Much quieter than my air nailers. Nail depth control is the best I have seen. The case has storage room for 4 boxes of nails. The body is big, but it's very light. Get the angled model, not the straight one; they're the same price.

DEWALT D55141FNBN 16-Gauge Finish Nailer/18-Gauge Brad Nailer/Compressor Combo Kit

• 2.0 SCFM delivered at90 PSI pump, 2.0 gallon tank and 150 max PSI enables more nails to be fired and provides quicker recovery
• Lightweight (30 lbs), thin (10.5-inch) and compact design is easy to carry and store
• 79 dBA operational noise level for a quieter work environment
• Roll cage and control panel provide protection to key compressor components
• Durable oil free pump provides extended maintenance-free operation;Low 8 amp draw motor provides easy start-up and reduces breaker tripping

I bought the nailer to install 3/4 inch wood flooring. Using the 16 gauge nailer, I was able to fire 2 inch brads throught the tongue of african rosewood flooring. A flooring nailer is recommended for this job but I was able to accurately hit the sweet spot above the tongue every time. African rosewood is much harder than oak and the nailer handled the job without a problem. I also like the versatility of having the 18 gauge nailer which I used to shoot 1-1/2 inch brads through quarter round molding. This unit is light weight but has plenty of power. For $300, it is well worth the price.

Buy DEWALT D55141FNBN 16-Gauge Finish Nailer/18-Gauge Brad Nailer/Compressor Combo Kit Now

I do a lot of drywall repair and re-texturing of ceilings & wall areas. I had to replace my old compressor which weighed 50 lbs and was looking for something easier to carry. This compressor works fine, is easy to carry but does run low on compression sometimes because of the small tank. This has not been a problem for me because it does recover quite quickly. I have really enjoyed the compressor in my day to day work and have also used both nail guns on a couple of projects. They worked well and made my jobs so much easier. I am really glad that I made the purchase.

Read Best Reviews of DEWALT D55141FNBN 16-Gauge Finish Nailer/18-Gauge Brad Nailer/Compressor Combo Kit Here

This is my first air compressor but I have had the privilege of using many different portable air compressors (most of them Porter Cable) and this is my favorite. I originally bought this set with general carpentry projects in mind, and I am very glad I did.

Air Compressor Pros:

1. Fills quickly.

2. 2 hose connections are very helpful

3. Metal plate on top protects the motor.

4. Stands up on back for storage so it takes up less floor space.

5. My favorite drain valve I have ever seen on any compressor.

6. Easy to carry.

7. Good placement of power switch on the back.

Air Compressor Cons:

1. 2 Gallon air tank does not allow for much storage.

2. CFM rate is not high enough to use a spray gun for more than short bursts.

Nail Gun Pros:

1. Both nail guns have easy built in safety locks above the triggers.

2. Biggest finish nailer I have ever seen come in an air compressor set.

3. Finish nailer has a good belt clip.

4. The finish nailer once got pulled off my belt and fell onto concrete pavers and did not get a single scratch.

Nail Gun Cons:

1. When you first get the guns they do not come with the hose connectors installed. (They do come with the connectors and Teflon tape but you must put them in.) To protect the guns from any particles falling into them, the guns come with plastic inserts which are almost impossible to remove.

2. The trigger bump on the brad nailer gets jammed in the upright position sometimes.

Accessories:

It came with two accessories I was not aware of at the time of purchase. A single bag big enough for both nailers, the 25' hose included, gun oil, and boxes of nails. It also came with very cheep feeling safety goggles, DPG54M-1D. It did NOT come with gun oil, so to my surprise I had to make a quick trip to the local home depot and buy a $2ish bottle of oil. Also included are the 25' air hose and a bump action trigger (Which I have not used yet).

Other Notes:

1. As you should realize, this kit does NOT come with a staple gun. That can be problematic in some furniture building, especially when applying lewan backing.

2. I bought a 50' hose so I could have two tools attached at the same time and it really comes in handy.

3. You will also want an air gun. They are great for cleaning off sawdust. Also, as I discovered in PC support at school, the air guns are great for cleaning out 8 years of dust from computers.

Want DEWALT D55141FNBN 16-Gauge Finish Nailer/18-Gauge Brad Nailer/Compressor Combo Kit Discount?

Im a contractor so the four things i loved about this set in order , what a great price with shipping was still $40 cheaper than homx depox , its so light at 30 lbs , the roll cage made me feel like it was solid and wont get hurt in my truck , its quiet (this was # 4 because its quieter than all oil less compressors ) but its not as quiet as i hoped still great but needs explaning. the sound level is like this if its in the same room you are in it will bug you in 5 min. you can still talk to the guy next to you with only a small raise in your voice, but within minutes the sound will bug you. placed in the next room it was great, no sound problems. also the sound it makes is not a annoying sound like the porter cable pancake(2/3 times louder) (porter put out more air and holds more air so if you need a comp for more than nail gunning the porter is a better option )to me the sound level was about that of a loud vaccumme cleaner which is very good for a compressor hope this helps 5 stars because not perfect but for the money you get SO MUCH. only rated for 500 hrs (bummer)

Save 44% Off

I'm not a pro, so I considered purchasing a much cheaper compressor and nail gun to install some trim in my home. I'm glad I decided to spend the extra money for this tool. It's made installing the trim a breeze. I'm looking forward to tackling new projects using this, and it's made me a believer in DeWalt products.

25 Gallon Portable Bench Top Sandblast Cabinet w/ Silicone Sealed Inside

This was one of the cheaper blast cabinets I have found that requires a lower CFM output from your compressor. The setup instructions were almost non existant, a few pictures and some vague instruction on how to assemble the unit. I mostly had to figure it out myself. The blast gun leaks air right from the start which means my compressor is running non stop while I'm using the blast cabinet. The media settles everywhere except over top of the pickup tube opening so I'm constantly having to stop and shake the media around to get it over the syphon tube opening. It also leaks media out of some of the seams. I think I'll have to caulk the seams or something like that. Now having said all that, it does work. I have run several pieces from an old lawn tractor that I'm trying to restore through the cabinet and it takes the paint and rust off which is all I need it to do. So in that respect I have to say, it works, but it's certainly not the best unit in the world. If you're looking for a low cost cabinet that will get the job done, but just barely, then this is for you.

Finish Nailer Comb Pack

I have used this product for several years now. I used it to remodel a kitchen, a bathroom and now to build a garage. I have had no problems using it with an impact wrench, framing nailer and any number of attachments. I realize I am not using it daily and not continuously but for a do it yourselfer it can not be beat.

Makita A-90233 Bulb 2/Pkg

• Replacement bulb for the 14.4V ML140
• Replacement bulb for the 12V ML120
• 2-Pack

These worked like a charm in my craftsman flashlight and arrive in 2 days. I had to write six more words so here they are that requirement is crazy.

Buy Makita A-90233 Bulb 2/Pkg Now

I bought these bulb to replace the Dewalt 14.4 v Flashlight, they fit perpect and is little cheaper than the Dewalt brand replacment.

Read Best Reviews of Makita A-90233 Bulb 2/Pkg Here

much less expensive than the dewalt brand, seems to last just as long. I will buy them again. make sure and match up voltage!

Industrial Air IV5248069 80-Gallon Two Stage Cast Iron Two Cylinder Air Compressor

• 5.2 horsepower, cast iron, twin cyclinder, oil lubricated pump engine
• one-piece cast iron crankcase and 12 inch caast iron crankcase
• 240 volt heavy duty induction motor
• splash type lubrication
• equipped with pressure gauge and on/off switch

I have puchased this commercial grade Air compressor for a 4 bay automotive repair shop. We have tested it in the shop and it is quite with out any vibrations running with 5.2 hp motor, 2-stage, Cast Iron tank, single phase 230v. Now we have installed it outside the shop and we can barely here it. I do like the output control knobs on the compressor, where we have turned it down to 150 psi (it can go up to 175 psi)and we have not yet seen a need to increase the output psi.

The dual output also helps, where we can run a quick connect for some out side the bay work. With couple of air tools running, the compressor hardly kicks in for just couple of minutes I guess the 80 Gallon tank is helping too.

We had some tough bolts on a honda and infinity and ball joints and had to run 3/4 inch tools for a while and the compressor kicked in only for a couple minutes couple of times.

I like the output psi adjustment knob, large Dials neatly in their place. I have only used it for a month now and works like a charm. Amazon had the best price, including free delivery, however did not have a lot of details. has a lot of details and it is one of their best selling compressors.

Save 17% Off