Cyclone Pneumatic 3/8-Inch x 50-Ft Retractable Air Hose Reel

Bought this based on the build quality everyone talked about in the reviews and the value for it. I was a little turned off about most reviews in here discouraging some because they found the mounting to be too difficult. I figured well even if it is hard to mount, I only have to do it once then it is done and I'll have a great hose reel. To my surprise this thing was extremely EASY to mount.

I mounted mine on my shop ceiling which sits about 16 feet above the floor.. My original plan after reading how hard people struggled with trying to mount a spinning hose reel was to install the reel on a piece of 2"x6" (which is perfect size for the mount btw) and then it would be easier to control when I moutned it on the ceiling. (The 2x6 was also to be used as a stabilizer between two rafters)

After receiving the unit and looking at it I realized that only one bolt, yes just one, is holding the reel to the mounting bracket. The one bolt is of course very sturdy and I have no doubt it will hold up to years of abuse. Removing the one bolt and the hose stopper at the end of the hose allows the mount to be free of the reel. This allows you to mount the bracket where you need to without the reel being in the way and all that additional weight.

This went unbelievably well. Attaching the reel was just as easy to put on as it was to take off. After you place the reel along with its attached bolt back into the mount, you can free one hand to thread the locknut and nut on. After the bolt is cinched down far enough with your hands it can hold the weight of the reel while you jump down off the ladder and get your ratchet to make sure the bolt is nice and snug.

This method of installation also allows you to customize the amount of tension the reel starts off with which was a blessing for me as I didnt want to have the reel take the hose 16 feet up in the air if I forgot to lock it into place. Now the tension is set to pull the cord at about 7 feet from the floor. Out of the way from anything but easily within my grasp when I need it and I dont need to remember to lock it in place.

Only had the reel for a few days so I cant comment on durability quite yet but it does seem to be very well built. I felt I had to express my satisfaction with the product and the installation.

this hose reel was replacing a smaller (broken) plastic one in my shop so I was gratified for the heft of the steel case and reel. The hose was good quality rubber. No hose fittings were included and the assembly/ disassembly instructions are poor but for the price it is a good value (I looked at many before this purchase and unless you have a professional shop or vehicle with a need for a 2-500 dollar reel, this is a good choice).

Buy Cyclone Pneumatic 3/8-Inch x 50-Ft Retractable Air Hose Reel Now

This unit seems to be well built.The only things I didnt like is the sticky substance on the hose,and the hose that is to short for connection to the compressor .The stickyness came off quite easily.Some people have had trouble mounting it.If youre going to install it on the wall or ceiling the easiest way to mount it is to first pull the hose all the way out(this makes the unit lighter and gets the hose out of the way for mounting) then move the stop right close to the rollers to keep it from rewinding.Dont skip this step if you want to keep all youre fingers.Next measure for youre half inch bolt holes(dont use lag screws,1/2 inch bolts make a more secure installation,and install much easier )drill holes for bolts.With the help of another person or the use of a set of 2-2 blocks to hold the weight of the unit,install 4 one half inch bolts.Next install hose from the compressor.You will most likely need a longer hose than the 3 foot one that comes with the unit,if it had a longer hose for connection to the compressor I would give it five stars. Over all this is great deal for the price.

Read Best Reviews of Cyclone Pneumatic 3/8-Inch x 50-Ft Retractable Air Hose Reel Here

I searched for a Air Hose and when I saw this one on line it looked pretty good. I did more research and after reviewing others I purchased the Cyclone. It arrived on time and Upon inspection every thing was in the box. The price was right for my garage use and the quality was great. I would recomend this product to any one.

Want Cyclone Pneumatic 3/8-Inch x 50-Ft Retractable Air Hose Reel Discount?

I was looking for a hose reel for use in my home garage. I purchased the Cyclone because of its simple design and competitive price.

Getting it set up in my garage was very simple. I especially like the fact that you can easily reconfigure the hose arm to meet the needs of your application. In other words it's very easy to adjust the arm from pointing up like in the picture, or pointing out horizontally to the left or right. This makes it possible to mount the arm to account for being mounted on a ceiling, wall, or floor.

For what I've seen so far, the unit is very strong, locks the hose in place when you've pulled it out as far as you require, and reels back in a predictable fashion. I'm extremely happy with my purchase. Highly recommended.

Save 47% Off

Honeywell MN12CES 12,000 BTU Portable Air Conditioner with Remote Control - Black/Silver

The unit seems to work well now that it is all set up and does cool the room down. However, I was never told that my windows had to be large to be able to put the panel and hose in the window in order to run the unit. I ended up having to take a saw to the plastic panel piece so that it would fit my window. The installation and set up instructions are also confusing and riddled with typos. However, now that I do have it working it does work pretty well

Didn't get much of a chance to use it. Tried it out in the bedroom for a little while and it was immediately clear that the noise level was going to be insufferable when the compressor kicks in. From a distance or in a larger room you might be able to tolerate this unit while awake, but in a smaller room (ours is 10' x 12' with low ceilings), it's just too loud, especially if you want to sleep. White noise of a fan alone is one thing, but... It's weird... the compressor runs at this certain oscillating pitch that makes it impossible for me to ignore... kind of like a bad hotel window/wall unit.

Also, whenever the compressor kicks on, it jolts the unit so hard it twists a good couple of inches on my hardwood floor... over the period of an evening, that could be bothersome.

That said, I highly doubt there's anything better out there in terms of noise. It's conceivable that some other manufacturer has insulated the heck out a unit like this to make it tolerable, but we're not going to bother with another unit.

As far as cooling: well, it's about 75 degrees in room and 76 out. It cooled down the area it was in to 72 within a few minutes. The air coming out is fairly cold, but I have no idea how it will deal with serious heat though. It is single hose, so it must rely on negative pressure to pull free air into the area in order to circulate and expell the heat.

In terms of ergonimics, it kind of sucks. It's heavy, and there are no "handles" to speak of. I managed to carry it up stairs, but it was a pain.

Not sure whether this is any better or worse than any competing product... I just know that, for the money, if you can mount one, just but a high quality Window or through-wall A/C. It will work better and I've heard much quieter window A/Cs than this.

Buy Honeywell MN12CES 12,000 BTU Portable Air Conditioner with Remote Control - Black/Silver Now

I don't know why anyone with a regular up-down sash window would get one of these. A window unit will cool better and is easier to install. I put this in a house with crank windows only so I have no choice. I used a hole saw to cut a 5" hole through the wall, installed a dryer vent kit and hooked the output tube of this unit to it. Works great. It easily cools the entire downstairs on my house, about 1500 sq ft, even on 90+ days. The output tube flow a great deal of air, far, far more than a dryer does. It easily handles the condensate that is placed into the air flow. No leaks or accumulation anywhere. Quieter than I thought, it hums away in the corner and I can talk over it. Quieter than any window unit I have ever owned. Remote is a bit awkward. You have to hit a button a couple times to get it to recognize the remote each time, but it works. Overall very good, would buy another.

Read Best Reviews of Honeywell MN12CES 12,000 BTU Portable Air Conditioner with Remote Control - Black/Silver Here

This does a good job of cooling but sounds like a jet engine! Really roars! Had to move it out of the bedroom, it was too loud to sleep! And makes alarming clunking noises.

Want Honeywell MN12CES 12,000 BTU Portable Air Conditioner with Remote Control - Black/Silver Discount?

Looked nice in the pictures, but it was far from a nice product. The back of the unit seems very poorly finished. After 3 days of use it started leaking a slightly, by the next morning my floor around the unit was wet. Could have been worse, good thing we noticed it before it warped the floor. Absolutely zero customer support for this item, no idea what kind of company this is.

Save 9% Off

Motor Guard DD1008-2 Mini Desiccant Filter, 2-Pack

• Pipe Size is 1/4 NPT, Nominal Airflow is 20 CFM, Filtration Rating is 5 Micron, Maximum Pressure is 125 PSI and the Temperature Range is 32-130 F
• Blister Card of 2 Filters
• This filter is the only in-line disposable filter that features a color change indicator, signaling time to change the filter
• Attaching directly to the spray gun the Motor Guard Mini Desiccant Dryer removes all traces of water vapor, aerosols and dirt
• Made in USA

i ordered this to use in line for painting with hvlp guns. right now i do not have any sort of big filter water separator or drier hooked up directly to tank so i get alot of water coming threw my hose when i use it with the blower attachment. when i paint cars i use a devilbliss whirlwind style air/water separator which worked ok but i needed a drier. i have my system set up like this. air compressor> regulator>25ft hose> devilbliss regulator> devilbliss water separator> motorguard desiccant filter> iwata lph-400

the beads did not turn pink immediately i got about 30-45 min use out of it before they STARTED to turn pink 50%. if you use a devilbliss whirl wind style water separator before your motorguard then you'll extend the life of it. devilbliss separators work much better then the "chepo" or no name brand ones. and they are pretty much the same price. so use the 2 together to get the most out of your motorguard desiccant filter

Buy Motor Guard DD1008-2 Mini Desiccant Filter, 2-Pack Now

These are good for about 1 hour.

Their are better one's out there

Don't buy this item.

Breaks very easily as well

Read Best Reviews of Motor Guard DD1008-2 Mini Desiccant Filter, 2-Pack Here

I still get a little water coming out of the tools, but I'm sure it would be much worse without these filters.

I have a bad set up so I am putting a lot on these little units and they are helping as expected. I would recommend

them to anyone with a small compressor unit needing filters for air tools. I would not use it for painting though.

Want Motor Guard DD1008-2 Mini Desiccant Filter, 2-Pack Discount?

great quality looks like it is working fine i know this brand of filters an trust them. The price is as good as any if you need a small dryer these work fine

Save 3% Off

great idea to determine when you have to replace the disposable filter. Will help when I'm spray painting. Little pricey but love the free shipping

Porter-Cable PT382 3/8-Inch Pneumatic Impact Wrench

• Durable pin clutch mechanism
• variable-speed trigger for precise control
• One touch forward/reverse switch
• Backed by 2-year warranty
• 2 year limited warranty

Impact wrench works great but I have two issues. First of all, the connector should be 1/4" NPT not 3/8". Secondly, it's harder than it should be to find the notch that the dial should be turned to in order to set the maximum torque. Having said that, this is a very good product and I would recommend it's purchase.

It's hard to find impact wrenches like this one that can actually be used to tighten without the risk of applying too much torque. Most other wrenches that have torque limiting features don't specify what the maximum torque is at each setting. Without this information, you really have no idea how much torque your applying and the adjustment feature loses its value.

Buy Porter-Cable PT382 3/8-Inch Pneumatic Impact Wrench Now

I have used this with a small compressor to break lug nuts on mud-encrusted kart wheels and to drive large lag screws without bogging down. I am pleased and it goes with me to the cabin.

Read Best Reviews of Porter-Cable PT382 3/8-Inch Pneumatic Impact Wrench Here

nice item...adjustability helps. Not for heavy duty use but does what I eed it for. appears to be well made. Too a couple of trigger puls to get it going initlally but wokrs first time every time now

Want Porter-Cable PT382 3/8-Inch Pneumatic Impact Wrench Discount?

I don't use a 3/8 inch impact nearly as heavily as I do my 1/2 inch, so I thought I'd save a few bucks, and get a more moderately priced one. When my package showed up, I was pleasantly surprised at the initial build quality, and general feel of precision of this tool, considering its price. While not on par powerwise with I-R air tools, it is also much cheaper to buy. I haven't used it enough to comment on its long-term durability, but build quality seems good, and power is adequate for anyting you would likely use a 3/8 drive wrench on.

Porter Cable is still putting out some good equipment. Use it most every day and am still happy. Good trigger location and forward and reverse are easy to manipulate.