DeVilbiss Auto Refinish Products Air Adjusting Valve With Pressure Gauge DEVHAV-511

• DeVILBISS HAV-511 High Output Air Adjusting Valve Regulator With Gauge
• Includes markings for the optimal operating range for the Devilbiss GTI Millennium, and GFG Plus Gun
• Precise air control at the gun for best, consistent results
• Impact resistant guage and break resistant lens
• Lightweight design that fits and professional spray gun

This product is a must have with the DeVilbiss Plus paint gun! Works very well. Had to replace the gun and gauge after over about 8 years of abuse. Not bad for an everyday shop tool.

Save 20% Off

Cyclone Pneumatic 3/8-Inch x 50-Ft Retractable Air Hose Reel

Bought this based on the build quality everyone talked about in the reviews and the value for it. I was a little turned off about most reviews in here discouraging some because they found the mounting to be too difficult. I figured well even if it is hard to mount, I only have to do it once then it is done and I'll have a great hose reel. To my surprise this thing was extremely EASY to mount.

I mounted mine on my shop ceiling which sits about 16 feet above the floor.. My original plan after reading how hard people struggled with trying to mount a spinning hose reel was to install the reel on a piece of 2"x6" (which is perfect size for the mount btw) and then it would be easier to control when I moutned it on the ceiling. (The 2x6 was also to be used as a stabilizer between two rafters)

After receiving the unit and looking at it I realized that only one bolt, yes just one, is holding the reel to the mounting bracket. The one bolt is of course very sturdy and I have no doubt it will hold up to years of abuse. Removing the one bolt and the hose stopper at the end of the hose allows the mount to be free of the reel. This allows you to mount the bracket where you need to without the reel being in the way and all that additional weight.

This went unbelievably well. Attaching the reel was just as easy to put on as it was to take off. After you place the reel along with its attached bolt back into the mount, you can free one hand to thread the locknut and nut on. After the bolt is cinched down far enough with your hands it can hold the weight of the reel while you jump down off the ladder and get your ratchet to make sure the bolt is nice and snug.

This method of installation also allows you to customize the amount of tension the reel starts off with which was a blessing for me as I didnt want to have the reel take the hose 16 feet up in the air if I forgot to lock it into place. Now the tension is set to pull the cord at about 7 feet from the floor. Out of the way from anything but easily within my grasp when I need it and I dont need to remember to lock it in place.

Only had the reel for a few days so I cant comment on durability quite yet but it does seem to be very well built. I felt I had to express my satisfaction with the product and the installation.

this hose reel was replacing a smaller (broken) plastic one in my shop so I was gratified for the heft of the steel case and reel. The hose was good quality rubber. No hose fittings were included and the assembly/ disassembly instructions are poor but for the price it is a good value (I looked at many before this purchase and unless you have a professional shop or vehicle with a need for a 2-500 dollar reel, this is a good choice).

Buy Cyclone Pneumatic 3/8-Inch x 50-Ft Retractable Air Hose Reel Now

This unit seems to be well built.The only things I didnt like is the sticky substance on the hose,and the hose that is to short for connection to the compressor .The stickyness came off quite easily.Some people have had trouble mounting it.If youre going to install it on the wall or ceiling the easiest way to mount it is to first pull the hose all the way out(this makes the unit lighter and gets the hose out of the way for mounting) then move the stop right close to the rollers to keep it from rewinding.Dont skip this step if you want to keep all youre fingers.Next measure for youre half inch bolt holes(dont use lag screws,1/2 inch bolts make a more secure installation,and install much easier )drill holes for bolts.With the help of another person or the use of a set of 2-2 blocks to hold the weight of the unit,install 4 one half inch bolts.Next install hose from the compressor.You will most likely need a longer hose than the 3 foot one that comes with the unit,if it had a longer hose for connection to the compressor I would give it five stars. Over all this is great deal for the price.

Read Best Reviews of Cyclone Pneumatic 3/8-Inch x 50-Ft Retractable Air Hose Reel Here

I searched for a Air Hose and when I saw this one on line it looked pretty good. I did more research and after reviewing others I purchased the Cyclone. It arrived on time and Upon inspection every thing was in the box. The price was right for my garage use and the quality was great. I would recomend this product to any one.

Want Cyclone Pneumatic 3/8-Inch x 50-Ft Retractable Air Hose Reel Discount?

I was looking for a hose reel for use in my home garage. I purchased the Cyclone because of its simple design and competitive price.

Getting it set up in my garage was very simple. I especially like the fact that you can easily reconfigure the hose arm to meet the needs of your application. In other words it's very easy to adjust the arm from pointing up like in the picture, or pointing out horizontally to the left or right. This makes it possible to mount the arm to account for being mounted on a ceiling, wall, or floor.

For what I've seen so far, the unit is very strong, locks the hose in place when you've pulled it out as far as you require, and reels back in a predictable fashion. I'm extremely happy with my purchase. Highly recommended.

Save 47% Off

10020 Ultra Quiet & Oil-Free 2.0 Hp 10.0 Steel Tank Air Compressor

This compressor is impressive, fills up fast, has good recovery, and is very very quiet! My only negative comment would be on the size of the tank. I new it was only a 10 gallon tank when I purchased, but this is because they don't offer a bigger one. Ideally a 25 or 30 gallon tank and this would be perfect for my use.

My son-in-law loved this item. He had it on his wish list and is very happy with it.

Thank you.

Buy 10020 Ultra Quiet & Oil-Free 2.0 Hp 10.0 Steel Tank Air Compressor Now

I purchased this compressor to supply a spray gun in my wood shop. It not only has plenty of air for a LVLP gun but it is the quietest air compressor I have ever owned (by far).

Read Best Reviews of 10020 Ultra Quiet & Oil-Free 2.0 Hp 10.0 Steel Tank Air Compressor Here

Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun

• Uses both cleats and staples
• Air operated
• Includes all accessories and carrying case
• Uses l cleats and u staples
• Air booster chambers for better nail driving

Was skeptical, as I usually am, but this tool lives up to its name.

Have installed alot of 3/4" 2-1/4" plank oak flooring with it so far, have had 1 misfire. Instructions say to not hit it too hard, but I found that it takes a good solid whack to get it to fire completely. Once you do that, it's a breeze. Always seats where it's supposed to, and fires the nails to the right depth. Too light a whack will not sink the nails.

It's really solidly built and balanced really nicely.

One drawback, I wish I could check magazine level without opening it up, but it's not too bad. It makes a hollower sound when you're dry firing.

Buy Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun Now

As most other people who bought this flooring nailer, I couldn't justify spending 400 plus on the Bostich or Porter Cable. I don't like renting tools from the home improvement stores because I like the freedom to use the tools whenever I want so I can do the job at my own pace. I gave it 4 stars because when I first hooked up the air supply, I heard some air leaking from where the handle meets the body of the nailer. I found that some of the bolts were not fastened down all the way. I just took the wrench that was supplied and tighten the bolts and it hasn't leaked air since. The other reason for 4 stars is that the logo's and SN are just stickers, and the user manual is not that great for beginners like me. As far as the functioning of the nailer, it gets 6 stars! I put down 3/4 inch pre-finished oak floor and the RMM4 worked perfect without a single misfire! Overall, I would recommend this tool in a heartbeat, especially to those who are trying to decide whether or not to buy or rent.

Read Best Reviews of Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun Here

I read all the reviews and ordered the nail gun. I opened the box, oiled up the gun and off we went (boys with new toys) it worked great until I disconnected the air compressor on the 2nd day and when I hooked it back up it developed an air leak on handle the bolt where coming loose and the gasket had slipped out the side so I shoved the gasket back in and tightened all the bolts and it worked like a charm.

I'm only 200sqft into a 600sqft project, not one miss fire and the only problem I had was with the bolts being loose on handle. I would recommend this nail gun for the price, before using check all bolts, it was easy with the allen wrench right on the tool.

I gave this a 4 because the handle on the hammer is loose after 4 days of use. A little better made hammer would be nice.

Good luck!

Want Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun Discount?

I purchased this nailer after seeing the high price of the Bostich. I was skeptical regarding its low price, and apparently rightfully so. After 300 square feet of nailing, the unit began to leak air. I took it apart and reassembled and it began to work properly. 200 square feet later, I was forced to repeat the same process. After another 300 square feet, it began jamming every fourth nail. The one year warranty sounds great, until you realize it will easily cost $25 (or more) to ship such a huge nailer, in addition to the $35 "diagnostic and handling fee" the company charges regardless of warranty status. What a scam. I should have gone with the name brand.

Save 26% Off

prompt shipping, before using I tightened all allen bolts on product, gun seemed to work fine but after installing about 100 ft of 3/4 wood noticed that base shoe was leaving slight impression in wood finish after every shot!!!!!!! noticable when light reflects on floor. I relieved edges of base plate with coarse sand paper and it stopped making the dents. Would suggest this mod to everyone. No jams for first 10000 cleats then multiple jams, every 100 or so yet to determine cause. hammer head came loose after 100 shots but drove the handle wedge in further and solved that problem. Have about 800 ft wood down with product so far.

Update: after approx 50000 cleats gun started leaking air badly, after tear down discovered torn gasket... replaced w/ spare supplied gun did not make it through one strip of cleats before it started leaking badly again disgusted I have not torn it down again but reverted back to my old dependable Bostitch stapler as I suspected this gun will not hold up for long..... A one job throwaway... Chinese junk. I would not recommend at all!

DEWALT D55151 14 Amp 1.1-HP 4-Gallon Oiled Twin Hot Dog Compressor

• 3.2 CFM delivered at 100 PSI pump enables quick recovery
• Oil lubricated pump improves durability
• Cast iron cylinder enhances pump life
• Lightweight design for easy use and handling in a variety of orientations
• High-flow regulator for increased performance;Dual soft start valves assist in cold weather start-up

This is probably the best small compressor I have owned. It is very user friendly, relatively quiet and it comes up to full pressure rapidly. It also has the added durability feature of an oil reservoir to keep the piston well lubed.Previous small compressors I have owned were oiless types and were prone to freeze up under prolonged use.Not so with this model.

Buy DEWALT D55151 14 Amp 1.1-HP 4-Gallon Oiled Twin Hot Dog Compressor Now

I've had this DeWalt compressor for three years and have cussed it the last two years. It performs horribly when it's cold, takes a long time to fill with air and is fairly loud. I really didn't realize how much I hated it until I finally had enough and purchased a Makita MAC2400. It is twice the compressor, performs great when it's cold and is half as loud as the DeWalt. The Makita is a little heavier, but for only $20 more you get a much better compressor.

Read Best Reviews of DEWALT D55151 14 Amp 1.1-HP 4-Gallon Oiled Twin Hot Dog Compressor Here

I do various home repairs on my own home and I needed a good quality air compressor for my nail guns. A friend of mine recommended the oil fill type as apposed to the oil-free version because of the life expectancy of oil-free. I have had the compressor for about 6 months and it has performed very well. It's a little louder than I expected, but not that bad. I'm very pleased.

Want DEWALT D55151 14 Amp 1.1-HP 4-Gallon Oiled Twin Hot Dog Compressor Discount?

I'm sure the compressor will prove to be a great reliable workhorse, fired it up and it's not too loud, held the pressure. My problem has been receiving 3 damaged compressors. The plastic guard around the motor is always cracked and the mounting bolts have been jarred loose leading me to think that if bump that broke the plastic guard was big enough to jar the bolts what else is damaged? Dewalt, whats the problem with using a better packing method? Other companies seem to have it down, especially Bosch. Extra thick cardboard and a few pieces of styrofoam please!

Save 53% Off

As a trim subcontractor we use compressors every day and we have to have dependable equipment. I have had several brands of oil bath compressors. All have given years of daily service with minimal breakdowns. These Dewalt models have everything you need to power 2-3 finish guns at a time. With routine checking oil and air intake filter your set for work. I try to pull the oil pan off and clean the crankcase out once a year and refill with synthetic oil. By taking the pan off you can wipe out the aluminum dust that settles in the oil. It will not drain out with the oil if you just pull the plug. This is a heavy duty unit that will give you years of service! I do not recomend any oil free models they are very noisy and breakdown more often. You may save a few bucks with oil free models and if you get one buy some ear plugs and keep your savings for the replacement model when it dies?

PRO 1/2" AIR CONTROL UNIT REGULATOR LUBRICATOR FILTER

I purchased this unit to replace a Regulator that had no filter or lubricator. It works nicely and the filter dumps any moisture collected at shutoff. The reason I gave this unit 4 stars instead of 5 is the o-ring on the oiler cannister. It requires several attempts to seat it correctly, each time requiring purging of my small shop system and refilling with pressurized air to test for leaks. It seems that the o-ring is just the right size without stretching and tends to slip out of its groove in the cannister when installing even using a little oil as lube to slip it into place. The fourth time was the charm though, and it's been holding well since then..

The Source S-KIT10B High Performace Portable Air System with Vehicle Bracket

• Complete Portable Air System
• 10 LB C02 Capacity Tank equals 640 Gallons Of Shop Air
• Hyper Flow Max 200 PSI Regulator. Adjustable for 0-200 PSI
• HI-GLO Powder Coated Tank and Vehicle Mount Bracket
• 20' COMP-FLEX Hose with quick Connect and Tire Chuck

This is a very complete kit, with quality components. My only beef is that the bottle arrived with deep scratches on the face of the bottle. The box arrived in good condition with no signs of damage, this leads me to believe it happened before packaging. I have yet to contact the vender. Other than this, I am happy with it.

Save 27% Off