Paslode Cordless 16-gauge Angled Finish Nailer no. 900600

• 1-1/4-inch to 2-1/2-inch cordless 16-gauge gas angled finish nailer with non-mar tip and sight lines
• Depth-of-drive wheel with probe position-indicator; locks tool at 10 nails to prevent blank firing
• Comfortable in sure grip-inch and soft trigger
• Includes nailer, battery, 2-hour charger
• 11-1/2 by 10-3/4 by 3-1/4-inches; 4.9-pounds with battery; 5-year warranty

This nailer works great. If the tool fails to fire or jams frequently (if you read other reviews you'll read about complaints of this happening, where they drepress the nose several times and then it works for a while, etc): CHECK THE EXPIRATION DATE ON THE FUEL CELL.

An expired fuel cell will make the tool malfunction randomly (drive 3-5 nails, not work, drive 3 more then not work or jam, etc). Creating huge amounts of frustration.

I have a set of Impulse nailers (framing and trim) and both worked flawlessly when I first bought them. I use them for home projects, that is, it can be a year or more before I use it on another project. Last year I started a new project and the framing nailer started not firing after driving 3-5 nails. I cleaned, oiled and cleaned again with temporary results after a few nails. The "usual procedure" is to depress the nose 10 times on the trim and at some point it starts firing again. Needless to say frustrating enough to make you want to buy a corded tool.

Four days ago I started working on trim, and the finish nailer started behaving the same way. Finally mad as heck I contacted paslode, and they told me to check the expiration date on the fuel cells. Sure enough, both of them were over 18 months expired. I replaced the fuel cells with a new one from the store, and wham, works without hessitation. I offloaded about 100 nails with each nailer and not a single misfire.

[this is now a year from my original post and both nails run like champs. Never again have they failed to misfire]

I would have rated this as a 5 star, if the manual would have suggested to check the expiration date of the fuel cells. Alas, it is possible that mine didn't say this because I bought mine over two years ago, and they had recently introduced the nailers.

Buy Paslode Cordless 16-gauge Angled Finish Nailer no. 900600 Now

I use alot of tools,have read alot of reviews but have never been inspired to write one,Until Now!Leave the compressor and hose at home,Forever..This cordless finish gun is the only one you need,it has every bit the power as a pnuematic.The features are great,depth of drive that lets you know where its at and which way you need to go.Nail lockout that every nailgun should have, atleast high end,Period.Quick clear jam lever.At 4.9 pounds it may not be the lightest finish gun,but with no tail attached you can manuever it like its floating on air.The angled magazine appears to be 20 degrees, which hasnt been a problem getting into corners or tight spots,but use's special 16 ga. nails,not the 15ga. senco type nail most of us already have,but it does hold as many nails and is still more compact.The nails are priced competitively,The fuel cells on the other hand are half the size as the other paslode guns but cost the Same? The cost must be in manufacturing the cylinder not the fuel,The advantages far outweigh the negatives and this tool is here to stay so the fuel cells should become cheaper and the nails should always be around..I've shot well over 500 2-1/2 inch nails I'm still on the same battery and fuel cell.The night I got it I set it up shot 10 nails WOW! Put the battery in the charger took the fuel cell out put it all away.The next day set it up Nothing,Nothing,,I thought fully charged battery,new fuel cell whats the problem,still nothing.I was ready to tear it apart or take it back untill I pulled the fuel cell out manually expelled some fuel put it back in Bam,Bam.Apparently something clogged the tube,since then I've left the cell in and just take the battery out before I put it away FLAWLESS! Most mornings it fires first pump,a couple of times its taken 2 pumps one exceptionally cold morning I noticed a slight loss in power,a quick adjustment no problem.All in all this is one great tool,it was designed for the professional to be the best finish gun you can buy air or cordless.Get one you'll love it...

Read Best Reviews of Paslode Cordless 16-gauge Angled Finish Nailer no. 900600 Here

We own several different Paslode nail guns, including the framing nailer and the straight finish nailer. We began using the Paslode products about 4 years ago. I will say that the new guns we have purchased in the last few months are significantly better than the quality of the guns purchased just a year ago. Don't get me wrong, we weren't disappointed with our purchase a year ago, it's just that these "newest generation" guns fire smoother, have more power and have been more consistent.

I have heard others complain about the cost of gas cartridges and replacement batteries and that the guns have to be reloaded fairly often. I will say that all of these are very minor inconveniences when compared to the overall benefits of these tools.

We now own about 10 of these various Paslode guns for our crews and they are truly a great tool. While they are quite a bit more expensive than the air tools, the freedom of use that this style of gun offers and how it will make your work more effecient makes this a purchase well worth the money. Also, Amazon's price is EXTREMELY competative and not paying sales tax on the purchase saves us in Michigan another ... . You will not be disappointed with this purchase.

Want Paslode Cordless 16-gauge Angled Finish Nailer no. 900600 Discount?

I have owned the Paslode Angled finish Nailer for about 3 months now and have fed through perhaps 1500 nails (mostly 2" and some 2 ½ & 1 ½"). I have never experienced a misfire! For the amount of work I do (definitely not a contractor) this tool is more than up to the challenge. The weight is less than 5 lbs, fits into most any spot and best of all there is no hose to follow you up a ladder. No doubt it is pricey, plus the nails and fuel cell costs would add up in a production environment. That said; I strongly believe that the convenience and freedom that this tool affords make up for these costs in most situations.

Prior to purchasing the nailer I spoke with Paslode about the reports of frequent misfires associated with this tool. They stated that the tool when originally released had its issues (mainly with 1 ¼" nails) but that they have been corrected. He went on stating the various modifications that had been rolled in to the latest version of the nailer and that the new nailers with a serial number starting with "03" were produced with all of these modifications. Judging from the performance I have experienced from my nailer I believe Paslode.

For me this tool has lived up to it's expectations and has allowed me to embark on projects I otherwise would have contracted out for or just not of completed. If you are a homeowner who does a lot of DIY or if you are a contractor who takes on finish carpentry work I am sure you will find this tool both useful and reliable... Since nothing else truly compares in terms of functionality I have to give this tool Five Stars...

****Update**** Just used this nailer the other day to fix some door molding. The unit worked perfectly as it has for nearly 7 years.

Save 9% Off

We have a number of these guns on our crew, including framing nailers and finish nailers. While we have tried other "gas powered" nailers, we have found the Paslode gun to be clearly the most powerful and most reliable.

The price for this gun on Amazon is competative. Buy one, you won't be disappointed.

I should also add that we started using the Paslode Gas Framing nailer about 4 years ago. That gun is still running fine. Recently, I purchased two more Paslode framing guns and two more Paslode finish nailers. The newer guns are more powerful and consistent. Using these guns sure beats dragging hoses and compressor all over.

Air Pro PUR-14X050 1/4-inch by 50 Polyurethane 250 PSI Air Hose

• 1/4-inch by 50-foot polyurethane 250 psi air hose
• Flexible to negative 40-degrees Fahrenheit; 2-1/2-inch bend radius; translucent to show contaminants-inch line
• Lightweight polyurethane
• Includes reusable hose ends and hose
• 1/4-inch by 50-foot; 3.69-pounds

This hose is extrememly lightweight and flexible. I finally bought one a few weeks ago thinking it would be nice to use when doing the trim work in the house. I have found that it is indescribeably better than the 3/8" rubber hose I had been using, and I really wish I had it at the beginning of the project. It does not kink as easily, is much more flexible, and thus much easier to drag along behind you without hanging up on things. When working in confined areas such as a closet or hallway, it is less likely to scuff the walls and damage freshly textured and painted sheetrock. It is very easy to coil up and put away when finished, as well. This hose is like having an extension cord attached to your air nailer, only I think it is even lighter weight than an extension cord. If you use air tools more than an hour in the next year, you will be happy you bought this hose.

Buy Air Pro PUR-14X050 1/4-inch by 50 Polyurethane 250 PSI Air Hose Now

I do lots of roofing and general framing. This hose is the best I ever had, especially in cold conditions.

Read Best Reviews of Air Pro PUR-14X050 1/4-inch by 50 Polyurethane 250 PSI Air Hose Here

Excellent hose, very light weight, and kink free. Also VERY durable, we ran this hose across razor-sharp wire mesh all weekend and not a single leak. Other than the price, the only complaint I have is the ease with which it tangles when coiling, but if you have a reel, this is the hose to get.

Want Air Pro PUR-14X050 1/4-inch by 50 Polyurethane 250 PSI Air Hose Discount?

I have used many different brands of air hose for my 20 years carpentry works. Conventional hoses are heavy and also not easy to roll after work. I bought it a year ago from Amazon. Since I have used it, I have never taken old hoses anymore. This is very durable, light and easy to handle with nail guns. Price is much higher than conventional hose, but it is worth. Excellent product!

Save 48% Off

I have the 1/4 & 3/8 versions of this hose. Both are bombproof and excellent. After 2 years neither has presented a single working problem. I prefer the 3/8 hose simply because it seems to store more easily and unwind without the granny knots.

4 Pack of Anti Vibration Pads 4" x 4" x 7/8" Rubber/Cork Vibration isolation pads

• 4 pack of Anti Vibration pads Rubber & Cork 4" x 4" x 7/8" 50 PSI max load
• FREE SHIPPING
• Applications are endless.... Air Compressors, HVAC, Stereo Equipment, Treadmills etc etc
• Designed for Indoor & outdoor applications

I live in an apartment building with really old air conditioning units on the roof that make a lot of vibration noise and during the summer with everyone running their air, all that mechanical noise on my roof was getting irritating. I decided to buy some of these pads and go up on the roof and install them. It did a pretty good job of reducing the noise dramatically. It didn't completely eliminate it, but it's now at least tolerable. Only problem I notice is that they can start to compress and their effectiveness can diminish at that point. So I'd actually double them up and stack two on top of each other for maximum effectiveness.

As another reviewer said, they do have quite a strong chemical smell to them when you first get them, but I have a few laying around I didn't use and I just went to smell it and the smell isn't there anymore. So I wouldn't worry about it, it dissipates. Of course non of this was a problem for me anyway since I used them outdoors.

Buy 4 Pack of Anti Vibration Pads 4" x 4" x 7/8" Rubber/Cork Vibration isolation pads Now

Can't tell if the anti-vibration feature works in my application since I installed it at initial installation As several have mentioned the smell is very strong and un-pleasurable. My wife asked me to put the invoice that came in the package in the garage; it was permeated with the smell also. The good news is the smell eventually dissipated took about a month. This would be unbearable if installed in the house for the first month.

Read Best Reviews of 4 Pack of Anti Vibration Pads 4" x 4" x 7/8" Rubber/Cork Vibration isolation pads Here

I have a mini-split A/C unit for my converted garage and I poured a new concrete slab for the outdoor unit to sit. Since this fan will certainly vibrate, I placed the unit legs on these pads, then bolted it to the concrete slap. This has resulted in an extremely quite outdoor unit which was important to me since I use the garage for recording music.

Want 4 Pack of Anti Vibration Pads 4" x 4" x 7/8" Rubber/Cork Vibration isolation pads Discount?

I used these to install my new furnace. They work great and do not allow any noise transmission. They also keep the metal cabinet from being in contact with the concrete floor so it will prevent rust in the case of water spills.

Save 48% Off

Great for moving a very heavy (900 lb) tape drive in the back of a truck 200 miles. This is an industrial vibration mount, and probably too heavy duty for something lighter than 500 lbs. The person who put his office fan on it had the totally wrong application for this.