Campbell Hausfeld TL050299AV 1/2-Inch Impact Wrench Grab-N-Go Tool Kit

• Includes bonus storage case for quick and easy storage of tool and accessories
• Delivers 250-Feet lbs. of torque to help quickly remove and install lug nuts and bolts
• Features push button forward and reverse switch for one-handed directional changes
• Requires 5.1 SCFM at 90 PSI

Tool does the job at a very reasonable price, especially if you pretty much just use it to rotate tires. No need to buy a socket set for that since it includes a 3-inch extension and a reversable 3/4 13/16 socket. You must use the extension with this socket.

Buy Campbell Hausfeld TL050299AV 1/2-Inch Impact Wrench Grab-N-Go Tool Kit Now

I bought this along with an entry level compressor because I had a crankshaft bolt that I could not remove by hand (could not keep shaft from turning). It did the job.

But, this is no 250 ft/lb wrench. I optimized my set-up, bigger hose, shorter run, no restrictions, not even a regulator. At 125 PSI straight off the tank, 20' of 1/2" line and high-flow connectors, I could not spin off lug nuts that I previously torqued to 100 ft/lb. I maintained and oiled it properly, this was probably after 10-15 uses, I mean pulls of the trigger.

So, it is what it is. If you buy this, you will ultimately wish you had something better. I bought a Stanley for about $80, and I'm good to go. I have not used this CH wrench once since... it sits in my shop with 2 years of dust on it. If you want one and are near Bemidji, come on by, you can have it for free.

Read Best Reviews of Campbell Hausfeld TL050299AV 1/2-Inch Impact Wrench Grab-N-Go Tool Kit Here

This is not powerful enough to do tire changes. For a measly $25 it can be useful for quick tightening and loosening of nuts and bolts that are not too tight but for wheels and lug nuts or taking off stubborn pulleys look elsewhere for more power.

Want Campbell Hausfeld TL050299AV 1/2-Inch Impact Wrench Grab-N-Go Tool Kit Discount?

If you do alot of auto repair get a heavier duty one. But for the occasional use 5-10 times a year this is perfect.

Save 25% Off

I guess good enough for a backyard mechanic but definitely not for a professional. Too weak and poorly built. Went through 2 in 2 months!!

Stanley Bostitch CPACK300 3-Tool and Compressor Combo Kit

• CAP2000P-OF oil free air compressor: 2.8 CFM at 90 PSI with 150 max, 6-gallon reserve tank, impact-resistant shroud to protect gauges
• SB-1850BN Brad nailer: adjustable depth guide, tool-free adjustable exhaust and no mar tip; drives 18-gauge brads 5/8-inch to 2 inches in length
• SB-150SX finish stapler featuring bottom-load magazine, tool-free adjustable exhaust and no mar tip; drives 18-gauge 7/32-inch narrow crown finish staples
• SB-1664FN finish nailer features quick-release nose door, adjustable depth guide, tool-free adjustable exhaust and no mar tip; drives 16-gauge straight finish nails
• Accessories include: 1/4-inch by 40-feet PVC air hose with fittings; 1,000 1-1/4-inch brads; 1,000 1-Inch staples; 1,000 finish nails, tool lubricant and canvas carrying case

I would prefer to give this product 4.5 stars instead of 5

The CPACK300 has been great for my recent remodelling jobs. Compared to the cp3, the kit remains the same except for the change in compressor. From my experience with both kits, the CPack300 has a far more ergonomic & jobsite friendly design. As other have pointed out for the CP3, the compressor handle was poorly designed & weight and size has been reduced to produce the cpack300 compressor. It's a tad more powerful at 40 psi & so much easier to lug around. Guages are protected by a rubber rims & the compressor is as compact as can be, the design is queter than the previous design & queter that similar porter cable designs.(it'll still wake you up in the middle of the night if you keep it plugged in next to you )

All guns require a bit of oil, but work flawlessly. Bostich makes great products made for a lifetime & i'm sure this is no different. The guns have never jammed, and work fine with 3rd party nails, or brads... after about 2000 nails, i have yet to have a jam. The design is great, the guns fire comparatively quiet & have the dual safety feature.

The no mar tips are of hard plastic & in my opinion inferrior to the porter cable guns i've used prior to purchasing this combo. I do appreciate the comprenhsive kit that is included. basically you get a quality stanley tool bag, about $25 worth of nails, staples, and brads.

The only deduction i'd give is to the cheap pvc air hose included, i guess this is true with all pvc produces... it maintains its rigitity & it maye be tough going around corners, causing the user to tug it along. Also it doesn't wind as well as rubber hoses, I'm sure i'll be upgrading the hose once it shows its age.

The whole kit is probably 50 lbs total & take a very small footprint when organize.

So far the whole kit is fantastic for the price i paid, about $270 after taxes. It's on par with more expensive kits & it give you alot for the money, including an impressive 7 yr warranty on the guns.

I've laid down about 1500 square ft of hardwood between this bostich & a porter cable combo that i borrowed off a friend. nailed in 150 ft of molding & fixed all sort of problems through out my home. I'd recommend this kit to anyone over the CP3 kit for anyone looking for a dependable nailer/compressor combo. CP3 kit has the inferior compressor

Buy Stanley Bostitch CPACK300 3-Tool and Compressor Combo Kit Now

I've been an owner of this combo for three years now. I bought it from Lowes for some light duty around the house fix ups. Tasks like pump car tires, patching up little pieces here and there. I did use it to built a window seat last year. The unit at first looked solid. The 3 tools that came with the combo is also well built. Boy, when it worked, I love the feeling of pulling the trigger rather than pounding nails all day long. I took very good care of this tool. Always clean it up and drop the pressure to about 20psi before storing it away after each use. And I never left it outside or left it fully pressurized overnight.

Last week I started a new project to install some stair treads. Took it out the garage and adjusted the pressure to 90psi for the brad nailer. The tool worked for a few shots, then suddenly, the nailer just went silent. Checked the pressure, and found that the tank pressure is still at 140 psi, but the outlet pressure just went to zero. I checked the compressor, and found that the pressure regulator knob has stripped. Apparently the threading on the knob is made of plastic. So even with very light usage, a failure on this part is bound to happen.

Then last weekend, I went to both Lowes and HD in my area shopping for another compressor in order to finish my project. Out of curiosity, I checked the Bostitch combos that was on display. Out of the two displays Lowes had, both had stipped pressure knob.

So to the potential buyers out there, beware of this flawed tool. A $300 compressor that uses a cheap plastic pressure regulator that's guaranteed to strip. So do your homework before you buy. Go to Lowes or Homedepot, and check out the floor displays that they have. Chances are, you will see that the plastic knob (the red knob in the front) on the floor model are all stipped, just from people looking at it and turning it a few times.

Read Best Reviews of Stanley Bostitch CPACK300 3-Tool and Compressor Combo Kit Here

I must say, conceptually, this kit is pretty handy to have around the house for the average DIY enthusiast. However, I've not had much luck with the compressor being there for me when I need it. In summary, this is mostly because of cheap parts and craftsmanship, which I shall elaborate on. Bottom line, would I buy again...absolutely not.

My opinions and observations:

1. Nailers: decent. I have cracked one of the end-caps where the air nipple screws in as they are made from cheap pot metal. No biggie, no surprise there, and probably my fault. I bought a new part online and replaced the defective part. My opinion is that the 3 nailers are the strong link in this chain.

2. Hose and accessories: worthless. Again, worthless. Do your self a favor and buy a quality hose. This one is cheap, stiff, and leaky.

3. Compressor: Eeesh...where do I start? Number one, this little sucker is LOUD. I've owned other compressors and wow. Buy some earplugs. After a year or so of VERY light use, I noticed leaking air from the quick disconnect. Then, the plastic knob on the regulator stripped, rendering the unit useless. It was all downhill from there. I purchased a new regulator, disassembled the compressor and replaced the valve (no easy walk in the park). Then I noticed the main pressure gauge is totally gone (as in broke). Then I started to notice the compressor wouldn't hold pressure, loosing 10lbs per 1-2 minutes. Found the culprit! The cheap brass tank coupling going into the regulator. Off comes the shroud again to fix it. Tried tightening, which slowed the leak, but it's simply not a good design. Thought about replacing, but honestly I don't want to invest any more money in repairs. I'll suck it up and live with it. Second time I had the shroud removed, I took note that the motor electrical feed is zip-tied in place at the very very cheap and loose quick connect plug. WOW! The internals look like a second grade science fair project. Don't expect quality here.

I LOVE the semi-portability of this compressor, and the nailers included in the kit are decent. But the cheaply made, low quality design of the compressor is definitely the Achilles Heel of this kit. Don't expect to pass it down as an heirloom. I'm just grateful that my income doesn't rely on this tool. Again, I've had all of these problems under VERY light use, i.e. inflating car tires, blowing up pool toys for the kids, occasional fastening jobs, etc. Of course, your milage may vary.

Want Stanley Bostitch CPACK300 3-Tool and Compressor Combo Kit Discount?

I bought this compressor combo at Lowe's 3 weeks ago. Went home to play with it and discovered the stapler didn't work. Took it back to lowe's and they replaced it. Used it today for the first real project and the cheap plastic pressure controller stripped out and failed. The part cost me $14 and the shipping is $16! LOL!!!

Save 22% Off

I purchased this combo pack after reading every review on Amazon and several other sites for this package and several others. I could not be happier with my purchase!! I needed a kit to aid in the renovation of my new (to me) home. So far I have used the finish and brad nailers to install base board, shoe, and door casing, install a solid pine pre-hung door, and build a couple planters for my wife. These tools are definitely up for many jobs around the house. The finish nailer is plenty powerful and always buries the nail. The brad nailer needed a little adjusting to get the nails to fully seat themselves below the surface of the wood, but it is now functioning great as well. I haven't used the stapler yet, but I'm sure it'll work just like the others. The compressor is a little loud, but I expected that based on other reviews. Once pressurized it will sink brads for a long time and will probably bury 20-30 finish nails before it needs to pressurize again. Don't pass up this combo kit, it will meet your expectations!

4 Pack of Anti Vibration Pads 4" x 4" x 7/8" Rubber/Cork Vibration isolation pads

• 4 pack of Anti Vibration pads Rubber & Cork 4" x 4" x 7/8" 50 PSI max load
• FREE SHIPPING
• Applications are endless.... Air Compressors, HVAC, Stereo Equipment, Treadmills etc etc
• Designed for Indoor & outdoor applications

I live in an apartment building with really old air conditioning units on the roof that make a lot of vibration noise and during the summer with everyone running their air, all that mechanical noise on my roof was getting irritating. I decided to buy some of these pads and go up on the roof and install them. It did a pretty good job of reducing the noise dramatically. It didn't completely eliminate it, but it's now at least tolerable. Only problem I notice is that they can start to compress and their effectiveness can diminish at that point. So I'd actually double them up and stack two on top of each other for maximum effectiveness.

As another reviewer said, they do have quite a strong chemical smell to them when you first get them, but I have a few laying around I didn't use and I just went to smell it and the smell isn't there anymore. So I wouldn't worry about it, it dissipates. Of course non of this was a problem for me anyway since I used them outdoors.

Buy 4 Pack of Anti Vibration Pads 4" x 4" x 7/8" Rubber/Cork Vibration isolation pads Now

Can't tell if the anti-vibration feature works in my application since I installed it at initial installation As several have mentioned the smell is very strong and un-pleasurable. My wife asked me to put the invoice that came in the package in the garage; it was permeated with the smell also. The good news is the smell eventually dissipated took about a month. This would be unbearable if installed in the house for the first month.

Read Best Reviews of 4 Pack of Anti Vibration Pads 4" x 4" x 7/8" Rubber/Cork Vibration isolation pads Here

I have a mini-split A/C unit for my converted garage and I poured a new concrete slab for the outdoor unit to sit. Since this fan will certainly vibrate, I placed the unit legs on these pads, then bolted it to the concrete slap. This has resulted in an extremely quite outdoor unit which was important to me since I use the garage for recording music.

Want 4 Pack of Anti Vibration Pads 4" x 4" x 7/8" Rubber/Cork Vibration isolation pads Discount?

I used these to install my new furnace. They work great and do not allow any noise transmission. They also keep the metal cabinet from being in contact with the concrete floor so it will prevent rust in the case of water spills.

Save 48% Off

Great for moving a very heavy (900 lb) tape drive in the back of a truck 200 miles. This is an industrial vibration mount, and probably too heavy duty for something lighter than 500 lbs. The person who put his office fan on it had the totally wrong application for this.

Ingersoll Rand Straight-Through Silencer, Model# 32323560

• Especially well-suited for inlet service on reciprocating compressors, small rotary positive or centrifugal blowers, or to discharge vacuum pumps
• Steel construction with enamel paint

First off, this thing is heavy duty. It's basically a glass pack muffler for your intake on your compressor. I'm sure it's meant for industrial applications as the holes are 1-1/4". I bought this to quieten down my Husky 60gal compressor from Home Depot as it gets pretty loud. I spent about 15 minutes in the plumbing section of Home Depot with muffler in hand coming up with a mix of bushing, reducers, and pipe fittings to take the opening down to the 1/2" the compressor uses. Same thing for the tail end so I could thread the air filter back on as well. After all was assembled, I turned on the compressor to find that the noise level was easily reduced by half. You can actually talk to someone while standing next to it in a normal voice. This product is definitely worth the buy.