Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer

• HVLP fine finish paint sprayer with 2-stage tangential turbine and 2 air filters
• Sprays light, medium, heavy-stains, varnishes, oil-based paint, and latex
• Durable metal body, plastic hose
• Includes spray gun, 25-foot hose, 2 needle/nozzle sets, wrench, viscosity stick, strainers, cleaning brush
• 12-1/2 by 22-1/2 by 12-1/2 inches; 32 pounds; 3-year limited warranty

I've had this unit for a couple of years now...and in short it's priced fairly. Not too great but not too bad. It got me started with HVLP. It just does not have enough power for shooting any thick (even kinda thick) finish. If you just want to shoot waterborne poly it works fine.

I wanted to shoot paint and oil based poly. For paint, forget it. Even with the heavy needle it just shoots splatter. For oil based poly it can't shoot a smooth even finish. With the heavy needle in it you get orange peel.

It was a good intro machine for me, but I ended up going for the top end

Accuspray on the second go round. Triple the price but you get professional results (why waste your time spraying if you get sub-par results?) and 3M's PPS which makes clean up a breeze. You know it's hard to justify the price for an expensive unit but think how many hours you have into your project. Why risk an average finish on it.

Buy Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer Now

I have tried HVLP conversion guns in the past...Well, cheapy ones and was left dissapointed. A bathroom project that consisted of spraying a significant amount of Urethane and a bathtub with Acrylic polyurethane was on my list so I needed an HVLP and decided I wanted a turbine. Not wanting to invest alot of money I did a tremendous amount of research and decided on the HV2500. Although it is only a 2 stage unit I was satisfied with the specs and decided to give it a try. This unit comes with a fine and general fluid set. For an affordable $15 I bought a thick coatings fluid set should I attempt latex.

I used the Fine fluid set for the clear urethane which came out fantastic with great atomization and no runs. For the white Acrylic Polyurethane on the bathtub I used the general fluid set with satisfactory results. I got some orange peel but I blame that more on lack of experience than I do the HVLP itself. I need more practice spraying and getting the settings just right. The gun is reasonably easy to clean and should last a while so long as your not using this commercially. The unit comes with a 25' hose which is great to afford you the ability to keep the unit far away from the spraying vacinity and since they sound like vacuum cleaners the farther away the noise the better.

Overall if your looking for a decent HVLP with good parts availability at a really good price, give the HV2500 a try. It may suprise you.

Read Best Reviews of Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer Here

Bought the CH HV2500 to paint all the cabinets in my house. Had never used a sprayer before. Took me six days to prepare the cabinets (remove hardware, wash, sand, prime, tape off face etc), and only about three hours to spray the whole job, 62 cabinets. I sprayed acrylic latex. The hardest part was in getting this thick paint thinned down to the correct viscosity. I also used Floetrol to help the latex lay flat. Once I discovered the correct mix, the CH HV2500 put on a mirror-like finish. I am very happy with this product.

Want Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer Discount?

we've been waiting to purchase an hvlp sprayer and have been experimenting with much more pricey outfits (1,000-2,000)We were in a pinch and decided to buy this outfit because we needed one asap. we figured it would hold us over till we could get one of the outfits we had been looking at purchasing. what a surprise! this is a great hvlp. we've used it numerous times now. no hassle to set up. no hassle to use. no hassle to clean. the hose is great for getting behind larger pieces and the spray flow is perfect to use with lacquer or poly. (although the 2 stage won't accomodate paint) we are so happy with it that we are going to stick with this one!

Save 22% Off

It takes practice to achieve great results to this system. The manual is very poor. I would not consider purchasing a cheaper system.

I'm spraying latex which needs to be thinned with water to look like chocolate milk. I also add Flotrol to help level out the finish. Don't expect to be spraying like an expert on your first try. However, after my third or fourth attempt I was happy. I'm assuming the finish will only improve as I get familiar with thinning paint and using the system.

The finish looks great but the application of paint seems to take forever. It does beat using brushes and/or rollers. There is hardly any overspray. I'm using it to spray custom cabinets/tables, etc.

...no one said finishing would be easy...this just makes it a little easier...