Porter-Cable CFFN251N Two Nailer 2-1/2-Inch Finish and 1-1/4-Inch Brad and Compressor Combo Kit

• 6-Gallon tank
• Nailers feature jam release mechanism
• Portable pancake-style compressor
• Compressor weighs 34 pounds
• Complete kit

I was looking for a compressor that was easily movable , yet still had the capability to power a nail gun without having to run all the time. I also needed a brad & finish nailer. Porter Cable's CFFN251N, Combo kit fit the bill . The directions are easy to read. Connecting the hoses to the compressor & nailer is pretty intuitive, The operating directions are instructive if you haven't used this type of equipment before. Including reading all of the instructions I was using the equipment with in a half an hour of opening the box. The equipment has performed flawlessly so far. One of the reasons I wanted Porter Cable nailers is that in addition to be being easy to use , it's supposed to be easy to remove a jammed nail from the gun. The nailers are certainly easy to use. I have shot several hundred nails & brads using Porter Cable nails but have not had a single jam. So I don't know how easy it is to remove jammed nails. The tank is not large but at 150 psi max pressure you can drive a lot of nails before the compressor cycles on again. The compressor is not particularly quiet , but the noise is acceptable. The equipment is very portable. I can easily move the compressor to wherever I am working & I have 25 feet of hose that enables me to move around a room without moving the compressor all the time. I would recommend this kit for anyone who needs a brad & finish nailer as well as a portable compressor.

Buy Porter-Cable CFFN251N Two Nailer 2-1/2-Inch Finish and 1-1/4-Inch Brad and Compressor Combo Kit Now

pros

its light

compact (you can toss it in the back of your truck)

its so light you don't feel the need to find a spot on the floor for this one (its oil less) so its not so imp. where u put it

lot of air to frame a house

or texture a room

or 3 trimmers

big tank for hand carry

good price

cons

its so loud that you cannot talk to someone in the room without yelling

when i say loud what i mean is

open the hood of your car lean over the engine think v8 1987

have someone rev the motor

thats exactly how loud it is

so if you can live with noise

get it its great

i cant

3/4" Water Pressure Regulator

• 300 PSI max. inlet pressure
• 200 deg. F. max.
• Regulates pressure down to 45 PSI
• Buna-N disc & diaphragm
• Iron body & spring chamber

Unlike most of the non adjustable regulators they sell for RVs, this universal regulator is easily adjusted and has a great flow rate, unlike the cheapo ones you can buy at the usual RV places. Though you'll need to add fittings and a gauge, it is worth getting a great shower.

Save 40% Off

Speedway 6909 8-Gallon Air Compressor with 77 Piece Kit

• 15.5 A, 1.5HP, 3360 RPM, 8 gallon tank capacity
• 5 CFM @ 90 PSI, 6 CFM @ 40 PSI
• 115 PSI Maximum
• High-efficiency, cold-start twin capacitor induction motor with thermal overload protection
• Ultra-quiet 93-95 dB operation

The combination of the compressor with a starter set of most used tools is a good value. The SCFM rating is higher than the typical pancake units so that a small spray gun can be used.

The unit was not adequately boxed given its weight. This resulted in the tank pressure gauge being damaged. An email request for a warranty replacement took two tries but was then provided quickly.

A small amount of assembly wheels, feet, handle is required. Very visible warnings to be sure to add the oil before using. The breakin procedure is clearly described.

It is noisier than I expected. All fittings were tight pressure held.

The supplied tools, while not professional grade, seem adequate for occasional home shop use. The included air tools are a brad nailer, a die grinder with a variety of stones plus cut off wheels and a ratchet with a set of sockets. There were also an air nozzle, tire chuck and a typical assortment of fittings. The hand tools inch and metric nut drivers are junk.

All in all I found the package a worthwhile value and the warranty response was good.

Buy Speedway 6909 8-Gallon Air Compressor with 77 Piece Kit Now

I went through the recommended break-in procedure, then charged the compressor up fully. The compressor charged quickly, but within 1 hour lost all pressure with nothing connected. The driver sets sent with the compressor are very poor quality. Used the air ratchet once, below recommended pressure setting, and it also sprang a leak.

I returned the item for a full refund.

Read Best Reviews of Speedway 6909 8-Gallon Air Compressor with 77 Piece Kit Here

Dam good product. This is a great and handy little compressor. Not to loud... Shipped in a reasonable time... Many little handy stuff I haven't even used yet...

I only wish it had came with an impact gun then it would have been perfect.

Everything appears to be well made.

Campbell Hausfeld TL1069 62-Piece Pneumatic Tool Kit

• 62-piece pneumatic tool kit ideal for do-it-yourself jobs
• Includes a 1/2-inch impact wrench with 250 foot-pounds of torque for quick removal of stubborn bolts and nuts
• Included 3/8-inch ratchet with 50 foot-pounds of torque removes and installs nuts, bolts, and sparkplugs quickly
• Kit also includes 1-5/8-inch air hammer; blowgun with 6 accessories; 10 impact sockets; and much more
• Includes a high-impact carry case

I found that the quality of the tools are very good for the price of the kit. The kit is also well made and holds the tools nicely. I did have to buy a bigger air compressor as my first compressor didn't push enough air to run the tools for continuous use..

Buy Campbell Hausfeld TL1069 62-Piece Pneumatic Tool Kit Now

The air tool kit look well, but you must know that you require a minimum 5 HP 13 Gal. or equivalent air compressor.

Read Best Reviews of Campbell Hausfeld TL1069 62-Piece Pneumatic Tool Kit Here

So i bought this kit based on the price and reviews, i'm a real DIY kinda guy, i was not disappointed with the quality and performance of the items. I was quite satisfied.

Want Campbell Hausfeld TL1069 62-Piece Pneumatic Tool Kit Discount?

This is a good way to get started with a new compressed air machine.

I got one for my workshop and this was available at a great price and I am familiar with the brand which is what I would call at least medium quality.

There is not much joy in it but you need an assortment of these and this is the best way to get it all in one package on the cheap.

Save 41% Off

I got these tools with my compressor. I have used the impact and ratchet and have NOT been impressed. I have not used the air hammer yet. I should point out that I have used a variety of air tools before, from many brands including snapon. This kit is a lot cheaper then high end tools and it shows.

Pros:

They work

Tools have not failed catastrophically

Cons:

Both are NOISY and use air like crazy

Impact was unable to remove the lugs on my truck. I tried different air pressures (my compressor goes to 200PSI) and my compressor has plenty of airflow (5.2 SCFM). I ended up having to break the lugs free by hand. After lugs where free, impact was able to remove them (albeit in a noisy fashion). Impact is able to tighten pretty well, but wear ear protection.

Ratchet works pretty well but is slow and lacking in power.

Overall, I have to give these tools a pass. They may work, but they are extremely noisy (even for air tools) and lacking in power. If you have a BIG compressor and need a couple of inexpensive air tools for cheap, this kit may be for you. Next time, I am going to buy fewer tools (I really only needed the impact) and spend more money on them.

Campbell Hausfeld HL5402 4-Gallon Oil-Lubricated Air Compressor

• Oil lubricated CAST IRON cylinder compressor pump for long lasting and reliable performance
• The 1-1/3 running HP motor combined with the Campbell Hausfeld pump stands for high quality performance and starting capabilities
• 4-Gallon twin stack tank for efficient air storage

Great for home use, small projects, airbrush painting, and HPLV gun use. Bought two "oilless" compressors in two years, sent one back for repair under warrantee, waited a month for return. They leak air, they are noisy, air needs lots of water and contaminant filtering, and can't keep up with the job/use. This compressor uses an "old fashioned" piston air pump, and works right. Add an auxiliary air tank to keep up with nail and staple guns, and presto, you have a dependable workhorse. Can't compare with the 60 gallon, double piston at work, but this one is fine for small projects. Absolutely worth money/use.

Buy Campbell Hausfeld HL5402 4-Gallon Oil-Lubricated Air Compressor Now

I've not heard any complaints so it must be working I have one similar one and it has worked great for years.

Read Best Reviews of Campbell Hausfeld HL5402 4-Gallon Oil-Lubricated Air Compressor Here

Does exactly what is asked of it. used for operating pneumatic nailers

only runs for 10-15 seconds to refill tank when switch cuts on pump

only "would like a bit better" is the rubber feet contstruction a bit light.

somewhat bent from shipping abuse. Note that air intake is plastic and

will not survive any abuse. only thing i added is quick disconnect for air

hose. always found CH stuff well made have been using the brand for

air handlers and compressors for decads

Want Campbell Hausfeld HL5402 4-Gallon Oil-Lubricated Air Compressor Discount?

I've had this compressor for 4-5 years and works like a champ. We use it all summer long shingling houses. This thing will keep up all day with two coil nail guns. Had to replace the plastic air cleaner with a metal one. But that is just because this thing gets used pretty hard and we broke the plastic one when it was in the truck going to a job site. other then that would buy another one when this one goes bad

Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer

• HVLP fine finish paint sprayer with 2-stage tangential turbine and 2 air filters
• Sprays light, medium, heavy-stains, varnishes, oil-based paint, and latex
• Durable metal body, plastic hose
• Includes spray gun, 25-foot hose, 2 needle/nozzle sets, wrench, viscosity stick, strainers, cleaning brush
• 12-1/2 by 22-1/2 by 12-1/2 inches; 32 pounds; 3-year limited warranty

I've had this unit for a couple of years now...and in short it's priced fairly. Not too great but not too bad. It got me started with HVLP. It just does not have enough power for shooting any thick (even kinda thick) finish. If you just want to shoot waterborne poly it works fine.

I wanted to shoot paint and oil based poly. For paint, forget it. Even with the heavy needle it just shoots splatter. For oil based poly it can't shoot a smooth even finish. With the heavy needle in it you get orange peel.

It was a good intro machine for me, but I ended up going for the top end

Accuspray on the second go round. Triple the price but you get professional results (why waste your time spraying if you get sub-par results?) and 3M's PPS which makes clean up a breeze. You know it's hard to justify the price for an expensive unit but think how many hours you have into your project. Why risk an average finish on it.

Buy Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer Now

I have tried HVLP conversion guns in the past...Well, cheapy ones and was left dissapointed. A bathroom project that consisted of spraying a significant amount of Urethane and a bathtub with Acrylic polyurethane was on my list so I needed an HVLP and decided I wanted a turbine. Not wanting to invest alot of money I did a tremendous amount of research and decided on the HV2500. Although it is only a 2 stage unit I was satisfied with the specs and decided to give it a try. This unit comes with a fine and general fluid set. For an affordable $15 I bought a thick coatings fluid set should I attempt latex.

I used the Fine fluid set for the clear urethane which came out fantastic with great atomization and no runs. For the white Acrylic Polyurethane on the bathtub I used the general fluid set with satisfactory results. I got some orange peel but I blame that more on lack of experience than I do the HVLP itself. I need more practice spraying and getting the settings just right. The gun is reasonably easy to clean and should last a while so long as your not using this commercially. The unit comes with a 25' hose which is great to afford you the ability to keep the unit far away from the spraying vacinity and since they sound like vacuum cleaners the farther away the noise the better.

Overall if your looking for a decent HVLP with good parts availability at a really good price, give the HV2500 a try. It may suprise you.

Read Best Reviews of Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer Here

Bought the CH HV2500 to paint all the cabinets in my house. Had never used a sprayer before. Took me six days to prepare the cabinets (remove hardware, wash, sand, prime, tape off face etc), and only about three hours to spray the whole job, 62 cabinets. I sprayed acrylic latex. The hardest part was in getting this thick paint thinned down to the correct viscosity. I also used Floetrol to help the latex lay flat. Once I discovered the correct mix, the CH HV2500 put on a mirror-like finish. I am very happy with this product.

Want Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer Discount?

we've been waiting to purchase an hvlp sprayer and have been experimenting with much more pricey outfits (1,000-2,000)We were in a pinch and decided to buy this outfit because we needed one asap. we figured it would hold us over till we could get one of the outfits we had been looking at purchasing. what a surprise! this is a great hvlp. we've used it numerous times now. no hassle to set up. no hassle to use. no hassle to clean. the hose is great for getting behind larger pieces and the spray flow is perfect to use with lacquer or poly. (although the 2 stage won't accomodate paint) we are so happy with it that we are going to stick with this one!

Save 22% Off

It takes practice to achieve great results to this system. The manual is very poor. I would not consider purchasing a cheaper system.

I'm spraying latex which needs to be thinned with water to look like chocolate milk. I also add Flotrol to help level out the finish. Don't expect to be spraying like an expert on your first try. However, after my third or fourth attempt I was happy. I'm assuming the finish will only improve as I get familiar with thinning paint and using the system.

The finish looks great but the application of paint seems to take forever. It does beat using brushes and/or rollers. There is hardly any overspray. I'm using it to spray custom cabinets/tables, etc.

...no one said finishing would be easy...this just makes it a little easier...