Ingersoll-Rand 2141 3/4-Inch Ultra Duty Air Impact Wrench

• Twin hammer plus mechanism for 30 percent greater durability
• Contoured professional touch trigger and ergonomically designed handle for increased comfort
• Provides 1200 feet-per-pound maximum torque
• Weighs just 7 pounds
• Only 8.2 inches long

Been using this gun(2141) for a few months now. The performance is unlike any other. Have been using a Large 1 inch format gun (cheapie Chinese jobs) with a rating of 1600 lbs of torque. While that gun is strong indeed, the 2141 does the same in a small format (Chinese gun is 38 lbs). When you are working with very heavy things all day it is nice to get a break at some point, this gun is a dream.

I use this to pull off lugs on heavy tractors and trailers, both inboard and outboard type wheels. While it may be a tight squeeze on some wheels because it lacks the two to six inch extension of the large guns, it does manage to fit in and get on the lugs. Also, I find that the 3/4 sockets are easier to find and cheaper than 1 inch. Although I do maintain a full range of the 1 inch sockets anyhow (Hey, I already own them)

I had one occasion where a lug just wouldn't move so I saved it for last, let the compressor fill up, tried again and it still didn't come off. A moment later I realize I had the gun on the lowest setting. Changed the setting and Blaaappp, the lug was off. So the gun was removing lugs at the lowest setting. These are heavy lugs that are usually put on at the highest setting, so the 2141 removed 9 out of 10 at the lowest setting.

Additionally, because of the small format, the gun fits where that larger gun wont. I have used it in engine cavities where you cant fit a breaker bar as well.

I would recommend buying this gun as a mainstay for most heavy stuff and buy the cheap 1" gun for $100 as a backup if at all

Buy Ingersoll-Rand 2141 3/4-Inch Ultra Duty Air Impact Wrench Now

This thing is strong. 1200 ft lb of torque compared to the 261 model with 1100. The 261 is mega heavy compared to this one too.

Keep in mind, standard shop air hoses are only 1/4", and really don't provide the cfm needed to run this tool. If that's what you have to use, you can hit it for a few seconds, let the hose fill back up, hit it again, or spring for a fatter hose. Their website recommends 1/2".

I paid about 380 for mine, now looks like the best deal amazon has is 390, compared to 388 for the 261. I recall getting the 261 for 325 about 10 years ago.

Read Best Reviews of Ingersoll-Rand 2141 3/4-Inch Ultra Duty Air Impact Wrench Here

This is a great product. It is light weight, solidly built, and has plenty of power.

Want Ingersoll-Rand 2141 3/4-Inch Ultra Duty Air Impact Wrench Discount?

I bought the impact wrent to replace an 10 year old ingersoll impact that was just worn out. I put it through the paces of a very tough undercarriage rebuild of a JD 330LC excavator and it did not even come close to letting me down. The power is immense and could not ask for user friendly operation. The noise level is not deffening by anymeans. I would recomend it to anyone who is in need to a great strong 3/4 inch drive impact gun.

If you want a lightweight, kick-butt impact gun for heavy duty work, this is it. I've tried more than a few, this beats a lot of 1" guns as far as power goes. It's small enough to fit in limited spaces, and with a 1/2" hose, is strong enough for tough truck work. I use mine daily on dual wheel trucks and buses and have had no problems with it since I've owned it. I got a great price and saved alot of $! Its light weight certainly makes it very manageable so it won't wear you out. Highly recommended!