AIRCAT 4338 3/8-Inch Red Composite Reversible Power Drill With Jacobs Chuck

• Rugged-sleek red composite reversible drill with feather trigger
• Jacobs chuck
• Superior internal mechanics
• Patented quiet technology (85 decibels)
• Ergonomically designed red handle (reduces operator fatigue)

I tried this out because they said it was quite compared to other air drills, well....they were right, this thing is very quiet compared to others I have either used or heard in the past. This air drill as with all air drills I have used have no torque so you can't drill screws with this thing but holes in metal seem to be OK and some soft woods. The smaller the drill bit the better in wood. I have drilled several larger holes in metal and have just loved this drill; it's light and easy to use. Usually I am making pilot holes for screws in wood and with smaller drill bits it seems to work OK. The larger drill bits seem to bog it down in wood and it stops sometimes. Another reason I purchased this is because of the keyless chuck that seems to work pretty well. The chuck seems to grab onto the smaller drill bits like the 1/16'' pretty darn good. All in all I am really glad that I purchased this and will look into other air tools made by Air Cat for the future.

Save 16% Off

Sharpe 6760 DryAire Dessicant Air Filter System

• System maintains a -40deg F dew point while achieving 0% compressed air humidity
• Coalescer that removes oil and sub-micron particles down to .01 microns
• Provides maximum filtration capacity of 30 CFM @ 175 PSI
• Silica gel provides maximum moisture absorption with easy desiccant changeout
• Dessicant can be regenerated or replaced

This product shipped in a beautiful styro molded box. Arrived in great shape. It's mounted on the wall, hooked up, and keeps the air and oil from the air supply going to my equipment as advertised. The one thing that I wish they did differently is the bracket that holds this to the wall is a little flimsy. The three canisters with all the fittings are a little heavy for the tiny bracket around the center canister. I had to add an additional strap support twixt the large right canister and the regulator to keep it from listing to starboard.

Also, it would be nice to have a filter wrench thrown in so you can access the contents when necessary.

Other than these little nags the product is sturdy, well built and I expect to get years of use from it.

Buy Sharpe 6760 DryAire Dessicant Air Filter System Now

I needed this for application of a special firearm finish. It was recommended to me by my local paint supply store, who also uses it, and I got it here for a lot less than $700 they were asking at the shop. 3-stage filter, cleans /very/ easily. All it takes is some elbow grease to unscrew the canisters and give them a quick shake and a drying out once a week or so. Extremely user friendly.

The added regulator on the end has two 1/4" NPT outlets that are great for hooking up extra hoseI run one to my paint gun and one to my sandblasting cabinet. The screw-valve is a pain to back in and out, but you can control pressure nearly to the pound, up from 5 to 120 PSI. I've run it for two months now without so much as a hiccough.

Don't use this by itselfyou still need a good 15' of iron pipe to let the air cool and condense. If you try and run this straight from your compressor, especially for extended periods, you'll have to empty out the big canister and de-hydrate your dessicant beads. Which, again, not terribly difficult, but you might as well prolong their life as much as possible.

I would buy this again, without hesitation. It's definitely worth the extra money to make sure you've got the right equipment for the job. Scrimping and getting one of the cheaper single-stage ones will end up costing you more in the long run due to water and oil content in your end product.

Read Best Reviews of Sharpe 6760 DryAire Dessicant Air Filter System Here

came as expected. Shipped to Canada and through customs in less than a week.

Want Sharpe 6760 DryAire Dessicant Air Filter System Discount?

I like it. Seems to filter out everything, I'm new to painting so I can't really say too much. But seems like the air is very clean coming out of it.

Save 26% Off

The item is exactly want I expected, and better yet the delivery was fast, almost as fast as the email confirmation. Thanks!

Grex Genesis.XG Double Action Top Gravity Airbrush, 0.3mm Nozzle, 7ml Cup

• Large top gravity cup for more paint and easier cleaning
• Internally mixed, cutting edge design for precise control of fine detailed work.
• Replaceable solvent proof teflon seals, precision machined stainless steel nozzle and needle
• Convenient to clean design with short passageway from cup to nozzle for responsive feel
• Preset adjustment knob for precise paint volume control

I have several airbrushes but wanted to try a Grex. Not disappointed!! It's a quality made and functional AB. It's great for my modeling purposes. I agree with the manufacturer a workhorse of an AB. Five stars with no hesitation and highly recommended.

Save 14% Off

Grex AC1810-A 1/8 HP 120-V Portable Piston Air Compressor

• Oil-less piston design for low maintenance operation
• Piston style provides high performance for the demanding professional
• Set and lock regulator prevents settings from changing in the locked position
• Retractable handle stows away when not needed
• Automatic shut-off turns compressor off when not in use to save power

This compressor is quiet, sturdy and effective. It's the kind of equipment you never have to worry about, during use.

The noise level is somewhere around 5 to 7 Sones while compressing air. One of the better features of this compressor is the system with which the motor runs. If you keep your PSI high, the unit will store a good amount of air, and only have to run occasionally. Users who run lower PSI, such as scale hobbyists, will hear the motor more often.

My only complaints are fairly superficial: the suction-cup feet don't always hold the compressor down well enough, and the unit can rumble itself off your table if you let it. A swipe of alcohol on the cups and your desk will cure this problem. The much worse issue, though it likely won't effect any serious user, is the airbrush holster. After a short period of use, mine broke at the support base, becoming completely useless. This was easily solved by getting a dedicated airbrush holder. Still, users should never rely on the on-board holster.

I haven't used a lot of compressors, but of those i have, this is the finest.

Buy Grex AC1810-A 1/8 HP 120-V Portable Piston Air Compressor Now

I have had several compressors over the last 20 years, and of them all I really like this Grex one the most. It's a great, solid compressor, that works perfectly for me, but aside from the reliability, it has some nice little things that most other compressors just don't have.

-It's very quiet. My wife appreciates this. My last one sounded like a piece of construction equipment

-It only runs when you need it. This works great, and I always get the pressure I need, but it shuts down and holds the pressure in a waiting area until you need it, so it isn't running constantly like most compressors.

-It has a nice handle. This is more helpful than you'd think.

-It has a built in moisture trap, so I don't have to have yet another cable and yet another piece of equipment dangling off of my airbrush line when I'm trying to move around and paint.

-It has nice suction feet. These aren't perfect, but they're more than anything else seems to offer, and they don't scratch my nice hardwood floors.

All in all I'm extremely happy with this purchase, and I'd absolutely buy another if I had to.

Read Best Reviews of Grex AC1810-A 1/8 HP 120-V Portable Piston Air Compressor Here

Great compressor used professionally on a daily basis. It gets hot, but it continually at proper pressure and reliable. Highly recommended.

Want Grex AC1810-A 1/8 HP 120-V Portable Piston Air Compressor Discount?

It is written "For what is a man profited, if he shall gain the whole world, and lose his own soul? or what shall a man give in exchange for his soul?" Matthew 16:26. Your salvation should be above everything. Cry out to Jesus in repentance of your sins and He will give you eternal life.*Romans 10:9-13. Read the bible daily and obey what you read.

The compressor works just like the description the seller gave. Would definitely buy from him again.

The reason you should have read this message is because it is the most important message in the world (the gospel), and you probably will not hear it from any other. Visit areyouagoodperson.org . God Bless!

Senco PC0968 Compressor, 1.5-Horsepower (PEAK) 2.5-Gallon

• Electric, hand-carry design
• Oil-less
• Weighing in at only 38-pounds
• 2.5-gallon tank storage.
• 135 PSI max pressure

This is a great, comparatively light, little compressor that drives my stapler; brad driver, 15 and 16-gauge finish nailers with ease. I have high expectations for any Senco product, so I did notice one minor design flaw if you plan to use a filter at the compressor connection.

The compressor's female quick release is facing more toward the roll bar frame instead of being angled away from it. There isn't enough physical space to clear a large in-line air filter, so instead of changing out the factory release, I simply used a swivel fitting on the air line (see my photo) to angle the filter and hose away from the frame. No big thing.

The stacked tank design doesn't seem to be as loud as pancake compressors, but is about what you would expect of a 1-1/2HP compressor. I still intend to fashion a noise shroud for indoor and woodshop use.

I should also mention that it took two tries to get a compressor delivered that wasn't damaged in transit. Damaged compressors seem to be a common problem at Amazon (read the horror stories under Makita) but this is attributable to bad compressor design, as much as rough handling during shipping. My compressors arrived by UPS, double-boxed with newspaper packing in between, yet the first compressor had a smashed pressure gauge inside. The inner box, from Senco, was not damaged in any way. So that must mean the gauge was damaged and shipped out anyway at the factory???

I have to praise Amazon Customer Service who replaced and delivered a perfect, new Senco compressor in just 72 hours--can't ask for better service than that.

Buy Senco PC0968 Compressor, 1.5-Horsepower (PEAK) 2.5-Gallon Now

This is a great little compresseor. I have a small contracting buisness and this compressor is light enough to carry through a house. It is quiet enough not to force everyone out of a room. It also is capable enough to handle finish work through light framing that you do in remodling work.

Read Best Reviews of Senco PC0968 Compressor, 1.5-Horsepower (PEAK) 2.5-Gallon Here

the Senco costs more than comparable capacity compressors but the quality of materials, workmanship, quietness, and reasonable weight (37#) made me happy to have paid the premium. I was doing a remodel job that required using a framing nailer....got 10 to 12 nails before the unit quickly and quietly recovered.

Want Senco PC0968 Compressor, 1.5-Horsepower (PEAK) 2.5-Gallon Discount?

I purchased this Senco Compressor after reading other positive reviews and I'm not disappointed. The unit is well-constructed and appears to be built to last. The pressure relief valve makes it easy to bleed air and the drain valve is brass and easy to operate. I especially like the quick on-off lever and the pressure limit control. All air fittings work as expected. The unit weighs little enough so that it's easy to transport using the well-balanced handle. Noise is something that all of these small compressors produce but the PC0968 doesn't make too much of it at least in my subjective opinion.

Save 15% Off

After researching the "smaller" compressors, the pc0968 was a perfect match. Billing was easy, shipping was quick, and the little guy works awesome. When the box came, I thought it was a toy. All around, great little unit. Lightweight, very, very, VERY quiet, super fast to pump up and recover. Haven't tried my framer yet, but I'm sure she will do ok.

Craftsman 9-16191 Compressor Accessory Kit, 20-Piece

• Two 1/4-Inch industrial couplers and two 1/4-Inch female national pipe thread plugs
• Three 1/4-Inch national pipe thread male plugs 1/4-Inch female connector 1/4-Inch male connector
• Blow gun and blow gun safety nozzle
• 2 inflation needles tapered inflation needle tire gauge 1/4-Inch by 25-Foot coil hose
• Dual tire chuck non stick tape rubber blow gun nozzle and blow gun adapter

Lets face it, for this price, you're not buying top of the line. But the Craftsman name holds up in this case and these tools are more than good enough for household work. Not recommended for a shop or any high use environment. Definitely better than two of the similarly priced packages which I found to be exceedingly low quality.

Black & Decker VEC010BD Start It 300 Amp Jump Starter

• 300 instant amps for jump starting your vehicle in emergencies
• Power safety switch and reverse hook-up warning system for added safety
• LED battery status indicators
• This item is not for sale in Catalina Island

This is a nice unit for starting cars, as noted below. But it may be too small for some other 12-volt applications. The lighter-socket outlet will shut off if you exceed 5 amps of continuous draw. At 12 volts, that would be 60 watts, and as luck would have it, my laptop PC requires 90 watts (7.5 amps) when plugged directly into a 12 volt source.

Also, in terms of total amp/hours, it would not be able to power something like a CPAP machine for a full night's use, which some people might like to do on a camping trip or the like. The description touts the unit's non-automotive power uses, but they are really somewhat modest. Charging a cell phone is not much of a challenge!

It works fine for starting cars, though. This appears to be identical to the Vector VEC010S, which is the unit I have. ("BD" at the end of this product ID is obviously just for Black and Decker's labeling on the front).

My car battery went dead in mid-winter, and I thought it was shot. A neighbor had this same unit, and in the spring I borrowed it twice to start the car, which went fine, even though his unit wasn't even fully charged when I borrowed it.

Finally I bought my own, charged it overnight as per the instructions, three hours past the blinking green. When I went to jump the car, for some reason it would not start right up as it had the other times. On the first attempt, the car turned over and over, but wouldn't kick in, and the effort drew down the jump starter's cranking power to zilch. Everything stopped.

The car had not cranked long enough to become flooded, so that was not the problem. I suspected that I might not have set the clamps correctly to get a "clean" grip, and that this reduced the power available for cranking.

The instructions tell you to wait a little after long cranking, so I did. I also reset the clamps (which are perfectly strong and fine, by the way!)After a few minutes, the unit had regained some of its cranking power, and it got the car going easily.

Back inside, I plugged the starter back in to charge up, and it took several hours to get back to full (blinking green light). Apparently, getting the car going had used quite a bit of juice.

The next time I needed to jump the car, it was instantaneous, and I performed multiple jumps without needing a new charge. So, unless there is something unusual about the first usage, I suspect that my placement of the clamps was to blame. The well-written instructions are clear about the need for a good connection, after all.

If you do want it mostly for jump starts, and do not expect to need it as an "emergency power" source for long hours, or to run any kind of serious appliance, it is a fine choice.

Buy Black & Decker VEC010BD Start It 300 Amp Jump Starter Now

Unit appears to be solidly constructed. Maybe I lucked out and got an upgraded version, but there have been a couple of reviewers that said the the plastic clamps snapped. The unit I have (manufactured 11/06) has ALL METAL clamps, very much nicer than many regular standard jumper cables.

This unit will hold a charge but needs to be maintained (recharged) at least every 60 days or so.

NEVER charge via the cigarette lighter adapter in your vehicle longer than 3-4 hours. It may be left on AC charge indefinately. It is better to keep it fully charged, discharging this unit will result in shorted cells.

All in all, a very small price to pay for peace of mind, at home and on the road. With a power inverter (less than $20.00) you can have silent power source for lights, cell phones, small tv's, laptops, flourescent lights, etc.

Read Best Reviews of Black & Decker VEC010BD Start It 300 Amp Jump Starter Here

Several people here have mentioned that the clips are made of cheap plastic. I'm happy to report that mine received march 2 2007 has all-metal clips that seem to be quite sturdy! They have definately updated the design.

Want Black & Decker VEC010BD Start It 300 Amp Jump Starter Discount?

I have a Honda, which I love, but since I do not drive her on a daily basis now, the battery is tempermental. I bought this product and have had to use it several times. I've found it easy to use and, even when the car battery has been completely dead, this jumpstarter has had more than enough power to get her started. I comparison shopped and the price of this Black & Decker was the best bargain, too. Recommend it highly.

T. Dorau -when properly stored, what you complain about will never happen. A battery should -neverbe stored in sub-zero or near-freezing temperatures. Don't leave it in the garage!

This unit offers "quick" recharging (4 to 5 hours) from a 12V source or gradual recharging (12 to 24 hours) from an AC source.

The AC source may be left connected indefinitely (true "float" charging) which is a plus for a standby power source. The inclusion of the LED light source is very thoughtful on the part of the designer(s).

In addition to jump starting a car, this is a good choice for small household items (TV, Radio, Weather Alert Radio) or emergency communications equipment (CB, Ham Radio).

This product also appears in some stores under the "Husky" and "Vector" brand-names.

Ingersoll-Rand 2141 3/4-Inch Ultra Duty Air Impact Wrench

• Twin hammer plus mechanism for 30 percent greater durability
• Contoured professional touch trigger and ergonomically designed handle for increased comfort
• Provides 1200 feet-per-pound maximum torque
• Weighs just 7 pounds
• Only 8.2 inches long

Been using this gun(2141) for a few months now. The performance is unlike any other. Have been using a Large 1 inch format gun (cheapie Chinese jobs) with a rating of 1600 lbs of torque. While that gun is strong indeed, the 2141 does the same in a small format (Chinese gun is 38 lbs). When you are working with very heavy things all day it is nice to get a break at some point, this gun is a dream.

I use this to pull off lugs on heavy tractors and trailers, both inboard and outboard type wheels. While it may be a tight squeeze on some wheels because it lacks the two to six inch extension of the large guns, it does manage to fit in and get on the lugs. Also, I find that the 3/4 sockets are easier to find and cheaper than 1 inch. Although I do maintain a full range of the 1 inch sockets anyhow (Hey, I already own them)

I had one occasion where a lug just wouldn't move so I saved it for last, let the compressor fill up, tried again and it still didn't come off. A moment later I realize I had the gun on the lowest setting. Changed the setting and Blaaappp, the lug was off. So the gun was removing lugs at the lowest setting. These are heavy lugs that are usually put on at the highest setting, so the 2141 removed 9 out of 10 at the lowest setting.

Additionally, because of the small format, the gun fits where that larger gun wont. I have used it in engine cavities where you cant fit a breaker bar as well.

I would recommend buying this gun as a mainstay for most heavy stuff and buy the cheap 1" gun for $100 as a backup if at all

Buy Ingersoll-Rand 2141 3/4-Inch Ultra Duty Air Impact Wrench Now

This thing is strong. 1200 ft lb of torque compared to the 261 model with 1100. The 261 is mega heavy compared to this one too.

Keep in mind, standard shop air hoses are only 1/4", and really don't provide the cfm needed to run this tool. If that's what you have to use, you can hit it for a few seconds, let the hose fill back up, hit it again, or spring for a fatter hose. Their website recommends 1/2".

I paid about 380 for mine, now looks like the best deal amazon has is 390, compared to 388 for the 261. I recall getting the 261 for 325 about 10 years ago.

Read Best Reviews of Ingersoll-Rand 2141 3/4-Inch Ultra Duty Air Impact Wrench Here

This is a great product. It is light weight, solidly built, and has plenty of power.

Want Ingersoll-Rand 2141 3/4-Inch Ultra Duty Air Impact Wrench Discount?

I bought the impact wrent to replace an 10 year old ingersoll impact that was just worn out. I put it through the paces of a very tough undercarriage rebuild of a JD 330LC excavator and it did not even come close to letting me down. The power is immense and could not ask for user friendly operation. The noise level is not deffening by anymeans. I would recomend it to anyone who is in need to a great strong 3/4 inch drive impact gun.

If you want a lightweight, kick-butt impact gun for heavy duty work, this is it. I've tried more than a few, this beats a lot of 1" guns as far as power goes. It's small enough to fit in limited spaces, and with a 1/2" hose, is strong enough for tough truck work. I use mine daily on dual wheel trucks and buses and have had no problems with it since I've owned it. I got a great price and saved alot of $! Its light weight certainly makes it very manageable so it won't wear you out. Highly recommended!