Bynford Laminated & Hardwood Flooring Stapler (uses SB97 type staples)

• Ideally suited for 5/16" floors, can also be used for floors from 1/4" - 1/2" (see details below)
• Uses Bostitch SB97-1G and Bynford BYN-AFS1 1" 21 gauge flooring staples
• Now includes BM Plastic Case

I got this stapler to do my Bruces 5/16 hard wood flooring and it was great. Did a room 14x13.5 in two days. 3/4 of the room in 6 hours after I got going. What a time saver and I did not have to rent, which would have cost the same. Do not go buying a 250 floor stapler if it is to do your own floor or if you are going to rent one. Take your time and use this. Jeff Wolfenson

Buy Bynford Laminated & Hardwood Flooring Stapler (uses SB97 type staples) Now

I bought the Bynford Floor Stapler last winter to lay engineered hardwood. I did not want to rent a stapler as I did not know how much time and help I would have. The previous spring I had laid about 250 square feet of 5/16 oak using a brad nailer, which worked fine but was time consuming placing the brads. With the Bynford my 2 sons and I laid about 450 square feet of the engineered oak hardwood in a day and a half, with only a couple of staple jams. This included all cutting and the occasional carpet staple and nails we would run into and have to remove (no matter how much prep you do you will still find these!). We use the stapler with a small Coleman compressor with a one pound tank. We found Bostitch staples in this size at our local Menards, but our local Lowes did not have them. Have not checked Home Depot.

One of my son's friends recently bought a house. My son took the Bynford over there and they laid over a 1000 square feet of 5/16 bamboo with no problems. I have done a lot of construction and remodeling over the last couple of years and this has been one of the best values I have bought in a tool.

Read Best Reviews of Bynford Laminated & Hardwood Flooring Stapler (uses SB97 type staples) Here

I am a home renovator and tend to buy only the best tools possible. Don't let the price of this gun fool you. It is very well made and balanced. Have done over 2000 sq ft of flooring since delivery without 1 problem. Only drawback is no available adaptor plate for 1/2 in flooring. Go spend $250 for a gun with this feature. Installed all 1/2 flooring with it though, with little effort. Just pay attention to your angle or glue a little 1/8in strip to the base for proper fitment. Very easy for most homeowners to use. Make sure you order staples. May be a challenge to find in some areas. This gun will save any homeowner or contractor lots of money. You'll be pleased....

Want Bynford Laminated & Hardwood Flooring Stapler (uses SB97 type staples) Discount?

The Bynford flooring stapler is as good as the Bostich and other similar nailers without a doubt! I have owned the Bostich and when I bought the Bynford I was surprised at how well constructed the Bynford is.I have installed about 2000 sq. ft and not one jam or problem!

Was sceptical about purchasing this gun, Not being a name brand but am very happy with purchase. Have shot 7500 staples so far and it jammed twice. Pretty good average I guess. I recomend this for the DIYer but wouldn't suggest for comercial work.