Bynford Laminated & Hardwood Flooring Stapler (uses SB97 type staples)

• Ideally suited for 5/16" floors, can also be used for floors from 1/4" - 1/2" (see details below)
• Uses Bostitch SB97-1G and Bynford BYN-AFS1 1" 21 gauge flooring staples
• Now includes BM Plastic Case

I got this stapler to do my Bruces 5/16 hard wood flooring and it was great. Did a room 14x13.5 in two days. 3/4 of the room in 6 hours after I got going. What a time saver and I did not have to rent, which would have cost the same. Do not go buying a 250 floor stapler if it is to do your own floor or if you are going to rent one. Take your time and use this. Jeff Wolfenson

Buy Bynford Laminated & Hardwood Flooring Stapler (uses SB97 type staples) Now

I bought the Bynford Floor Stapler last winter to lay engineered hardwood. I did not want to rent a stapler as I did not know how much time and help I would have. The previous spring I had laid about 250 square feet of 5/16 oak using a brad nailer, which worked fine but was time consuming placing the brads. With the Bynford my 2 sons and I laid about 450 square feet of the engineered oak hardwood in a day and a half, with only a couple of staple jams. This included all cutting and the occasional carpet staple and nails we would run into and have to remove (no matter how much prep you do you will still find these!). We use the stapler with a small Coleman compressor with a one pound tank. We found Bostitch staples in this size at our local Menards, but our local Lowes did not have them. Have not checked Home Depot.

One of my son's friends recently bought a house. My son took the Bynford over there and they laid over a 1000 square feet of 5/16 bamboo with no problems. I have done a lot of construction and remodeling over the last couple of years and this has been one of the best values I have bought in a tool.

Read Best Reviews of Bynford Laminated & Hardwood Flooring Stapler (uses SB97 type staples) Here

I am a home renovator and tend to buy only the best tools possible. Don't let the price of this gun fool you. It is very well made and balanced. Have done over 2000 sq ft of flooring since delivery without 1 problem. Only drawback is no available adaptor plate for 1/2 in flooring. Go spend $250 for a gun with this feature. Installed all 1/2 flooring with it though, with little effort. Just pay attention to your angle or glue a little 1/8in strip to the base for proper fitment. Very easy for most homeowners to use. Make sure you order staples. May be a challenge to find in some areas. This gun will save any homeowner or contractor lots of money. You'll be pleased....

Want Bynford Laminated & Hardwood Flooring Stapler (uses SB97 type staples) Discount?

The Bynford flooring stapler is as good as the Bostich and other similar nailers without a doubt! I have owned the Bostich and when I bought the Bynford I was surprised at how well constructed the Bynford is.I have installed about 2000 sq. ft and not one jam or problem!

Was sceptical about purchasing this gun, Not being a name brand but am very happy with purchase. Have shot 7500 staples so far and it jammed twice. Pretty good average I guess. I recomend this for the DIYer but wouldn't suggest for comercial work.

WL211000SJ Campbell Hausfeld Piston Service Kit

• Campbell Hausfeld Piston Service Kit
• Fits Campbell Hausfeld, Husky, Sears plus others

Received the Piston Kit a day before I was told it was coming. Which was a good thing since I needed the air compressor. It was exactly as described.

Buy WL211000SJ Campbell Hausfeld Piston Service Kit Now

I was delighted to be able to purchase a good-quality part to repair my compressor instead of replacing it. it was a very straight-forward installation, no issues or concerns, and has been functioning without issue in the compressor for nearly a year now. The compressor itself is a bit loud and has some quirks, and I had to replace a piece of tubing between the pump and tank when it split, but the replacement part was top-notch.

Read Best Reviews of WL211000SJ Campbell Hausfeld Piston Service Kit Here

The Campbell Hausfeld Piston Service Kit was exactly what we needed to repair our compressor. We received it promptly and without any problems.

Motor Guard M-830 3/4 NPT Shop Air Regulator

• Pipe Size is 3/4 NPT, Nominal Airflow is 250 CFM, Outlet Pressure Range is 2-125 PSI, Maximum Pressure is 250 PSI and the Temperature Range is 40-120 F
• Includes a locking T-handle for ease of adjustment and a pressure gauge with a solvent-proof glass lens
• Model M-830 regulator is a true diaphragm, relieving type regulator for precise control of air pressure
• High-flow regulator is designed to handle the whole shop
• Made in USA

I use this regulator right at my 80gal 7.5hp compressor. A huge amount of air passes through this thing when I am running a pneumatic sander and I can successfully regulate the air back from the tank's 160psi down to 85psi in the lines. I bought this US made model after a Korean made model from a name brand manufacturer (which will remain undisclosed) just didn't meet the demands.

Before I bought this regulator I called the manufacturer and immediately talked to a real person just a few states away, they were certain that this model could handle the cfm requirements of my shop and sure enough it does.

Save 11% Off