Bynford Laminated & Hardwood Flooring Stapler (uses SB97 type staples)

• Ideally suited for 5/16" floors, can also be used for floors from 1/4" - 1/2" (see details below)
• Uses Bostitch SB97-1G and Bynford BYN-AFS1 1" 21 gauge flooring staples
• Now includes BM Plastic Case

I got this stapler to do my Bruces 5/16 hard wood flooring and it was great. Did a room 14x13.5 in two days. 3/4 of the room in 6 hours after I got going. What a time saver and I did not have to rent, which would have cost the same. Do not go buying a 250 floor stapler if it is to do your own floor or if you are going to rent one. Take your time and use this. Jeff Wolfenson

Buy Bynford Laminated & Hardwood Flooring Stapler (uses SB97 type staples) Now

I bought the Bynford Floor Stapler last winter to lay engineered hardwood. I did not want to rent a stapler as I did not know how much time and help I would have. The previous spring I had laid about 250 square feet of 5/16 oak using a brad nailer, which worked fine but was time consuming placing the brads. With the Bynford my 2 sons and I laid about 450 square feet of the engineered oak hardwood in a day and a half, with only a couple of staple jams. This included all cutting and the occasional carpet staple and nails we would run into and have to remove (no matter how much prep you do you will still find these!). We use the stapler with a small Coleman compressor with a one pound tank. We found Bostitch staples in this size at our local Menards, but our local Lowes did not have them. Have not checked Home Depot.

One of my son's friends recently bought a house. My son took the Bynford over there and they laid over a 1000 square feet of 5/16 bamboo with no problems. I have done a lot of construction and remodeling over the last couple of years and this has been one of the best values I have bought in a tool.

Read Best Reviews of Bynford Laminated & Hardwood Flooring Stapler (uses SB97 type staples) Here

I am a home renovator and tend to buy only the best tools possible. Don't let the price of this gun fool you. It is very well made and balanced. Have done over 2000 sq ft of flooring since delivery without 1 problem. Only drawback is no available adaptor plate for 1/2 in flooring. Go spend $250 for a gun with this feature. Installed all 1/2 flooring with it though, with little effort. Just pay attention to your angle or glue a little 1/8in strip to the base for proper fitment. Very easy for most homeowners to use. Make sure you order staples. May be a challenge to find in some areas. This gun will save any homeowner or contractor lots of money. You'll be pleased....

Want Bynford Laminated & Hardwood Flooring Stapler (uses SB97 type staples) Discount?

The Bynford flooring stapler is as good as the Bostich and other similar nailers without a doubt! I have owned the Bostich and when I bought the Bynford I was surprised at how well constructed the Bynford is.I have installed about 2000 sq. ft and not one jam or problem!

Was sceptical about purchasing this gun, Not being a name brand but am very happy with purchase. Have shot 7500 staples so far and it jammed twice. Pretty good average I guess. I recomend this for the DIYer but wouldn't suggest for comercial work.

DEWALT D55153 15 Amp 1-Horsepower 4 Gallon Oiled Twin Hot Dog Compressor

• 4.0 CFM delivered at 90 PSI to provide rapid recovery
• Oil-lubricated pump improves durability
• Cast-iron cylinder enhances pump life
• High-flow regulator for increased performance
• Four-gallon twin-stack tank design with proven acceptance in the market

This bad boy will do the work of a much larger compressor. It will easily run several guns on a framing crew or even a roofing crew. The HP rating is a little misleading compared to other compressors. 2 HP isn't max , it's continuous. I have one of these (Emglo 2HP) that's been abused and used hard for several years now with no problems ,only good dependable air. I highly recommend it. If I could change one thing I would make it quieter.

Buy DEWALT D55153 15 Amp 1-Horsepower 4 Gallon Oiled Twin Hot Dog Compressor Now

I use this with my Paslode; 16 Gauge and Framing nailers, I hang then trim doors, sometimes rebuild sills and headers. I also do various trim/frame carpentry on other projects.

If you are worried about changing the oil its only once a year!

If you are worried about operating on a slope, i have always found a flat spot to locate it in, even roofers leave theirs on the ground, just put on more hose. Who wants to carry this up a ladder anyway?!

I would never buy an air compressor without a user serviceable airfilter!

I would never buy one of those oil less types

Read Best Reviews of DEWALT D55153 15 Amp 1-Horsepower 4 Gallon Oiled Twin Hot Dog Compressor Here

Bought this and use it daily. Has worked out fine, no problems. Low noise levels and short run time with good useable capacity. Very well built.

Want DEWALT D55153 15 Amp 1-Horsepower 4 Gallon Oiled Twin Hot Dog Compressor Discount?

More air and very quiet compared to the porta cable I previously owned, although some what heavier. The porta cable was a toy compared to this Dewalt. I've read reviews where people complained that their product was damaged in shipment, but mine was perfect and I got it in 2 days even though I went super saver shipping. I am well pleased with the product and the service.

Save 54% Off

Great Compressor Good Balance, not to noisey, Well protected for construction Handling. A very strong runner for all day use.

Canless Air System O2 Hurricane Industrial Unit

• One charges lasts over 12 minutes
• Uses just the air we breathe
• Charges like your cell phones
• Cordless
• Reduces your carbon footprint

Now that I've had a chance to let the unit charge, I've come back to edit my review. No instructions are included in the box. This isn't necessarily a huge problem: there is one button on the unit, and holding it down turns the blower 'on.' Letting it go shuts it off. It really can't get easier to use.

However, the online manual notes that the device should be charged for 10 hours before using, and a reference to this suggestion should be included in the box. The wall wart has an LED that shines green when the unit is charged, and red while it is charging; it took a little less than five hours for the light to go green on its first charge.

The duster definitely moves some air. The manufacturer claims airspeeds of 200 miles per hour; the air coming out the nozzle with or without the focusing straw does not feel as though it is moving at that speed. Comparing with a chemical air-duster, the chemical product does seem more powerful. The nozzle is also much smaller on the chemical duster to fit into the fins on small heatsinks.

However, the ability to run the electric duster for extended periods without filling the room with chemical vapors and bittering agents is a definite plus. While it does emit a high pitched whine while running it reminds me of a dustbuster hand vacuum I'm so far happy with this purchase.

Buy Canless Air System O2 Hurricane Industrial Unit Now

I repair copy machines for a living. It has really been nice to not breath in all the chemicals from canned air. I carry both in my bag but have not used the canned air since I started carrying the O2 system. I have even suggested that we replace our canned air with this unit. My machines are cleaner and I can use it at any angle. Try doing that with canned air.

Read Best Reviews of Canless Air System O2 Hurricane Industrial Unit Here

I didn't get this so much for my keyboard as for the collections of knickknacks that crowd our shelves. Wow, I was very impressed with how it blew the dust away. Yes, I know the dust in still "there," but I assume it will drift down to some flat surface where regular dusting and vacuuming will pick it up. Care must be taken on light items (little wooden carved animals from Oaxaca Mexico), because they will be blown over in the gale -you need to back away some with these types of items.

So I'm very pleased and wish I would have discovered this years ago!

Want Canless Air System O2 Hurricane Industrial Unit Discount?

I knew this product might not be what it was cracked up to be when they measured the air flow in MPH, and not in PSI, CFM, or SCFM, and they did not make a comparison to how it measures up to canned air in this regard. Basically this is just a small fan that blows air. It's force is maybe a little more than half of what canned air is. It is also very noisy due to the high RPM the motor has to run at to generate wind speed from the small internal fan. I rated this at two stars because it does work, but ONLY for very light duty uses. It does not have the power or force needed to remove fine dust particles or larger debris in tight spaces where you can't get right up on. You can also feel a reduction in air flow when you use the straw extension due to fact that the small motor can't handle the added resistance the straw adds. For what you get it is also a very pricy unit. I do a lot of electronic/computer work and it just did not fit my needs. I decided to return this product and bought a small electric air compressor at the local hardware store. It was cheaper than this product and has even more force than canned air. The only downside is it weighs more, but is still portable enough to not be an issue. I also can use it for other tasks other than just cleaning, which to me makes an air compressor an even greater value. For some, this product may work, but for me it just was not economical nor forceful enough to be worth while.

Save 15% Off

Purchased this because I was tired of buying the compressed air type cans, to clean off my keyboard and computer, every month or so.

Pro:

Rechargeable battery included

Will run continuously for longer than I usually need, won't crap out like the compressed air cans do after 20 seconds or so

Basically the same size as the compressed air versions

Con:

The only con that I have found is the noise that it makes, I have to be careful not to use it late at night, otherwise it might wake up the wife and kid. This was enough to take a star off the rating, otherwise it would have been a 5-star product.

Still glad I purchased it as it saves me money and does the job just fine.

Astro Pneumatic 2630 Universal Quick Coupler with Safety Lock and Air Regulation

• Designed to facilitate efficient safety locking, air flow regulation and pressure release
• Constructed from durable material
• Offers long lasting durability

This thing makes connecting and disconnecting air tools a breeze! I replaced a cheap connector that is typically found in those kits which had become very difficult to use when the line was pressurized. Connecting and disconnecting on the old connector required quite a bit of force, and popping the release to remove a tool resulted in a large burst of air which was not only rather loud, but pushed the tool or hose out with enough force that it could result in injury if you weren't careful.

This Astro coupler is a vast improvement. I installed it within about 60 seconds using a little thread tape. The blue adjustment ring is locked when there isn't a male coupler inserted, so it acts like an extra air lock. Then you push the tool in to the coupler and it allows the ring to be twisted allowing air to flow to the tool. The tools click into the coupler with very, very little force.

I'm not sure how useful the air adjustment (regulator) aspect will be, as I tend to control my air on the compressor thus in my case the adjustment is either on or off, but for some uses it might be helpful to have the adjustment right there at the tool. When you are done with the tool and you want to remove it, you simply rotate the adjustment ring to the locked position and it releases the air between the coupler and the tool. The amount of air released is minimal and it is very quiet. It isn't like a traditional coupler that releases a powerful blast of air. Then you simply pull the sleeve (the black part of the coupler) and the tool disconnects with minimal effort.

One nice feature is if you happen to like to leave something like a blow gun attached and if that tool happens to leak air a bit, you can simply rotate the collar to lock the airflow and it should prevent air leakage when you aren't using the tool. In my case my blow gun tends to bleed a bit of air, so in the past I always had to disconnect it. With this coupler I can just leave it installed and rotate the collar to shut off the airflow when I'm done for the day.

According to the instructions the couple accepts M style, ARO style, Hi Flow style, and T style connectors so it is essentially universal. I believe everything I have is M style (which seems to be the most common but don't quote me on that). I honestly have no negatives to report here because the coupler just works... and it is far superior to the regular couplers that have no pressure release option.

In short tools go in easy, tools release easy, it gives an additional layer of safety, and makes the entire process much easier. I suppose at almost $20 it is a little steep and it is true you could purchase several of the cheaper couplers for the same money, but I honestly feel this is a worthwhile upgrade.

Save 43% Off

DEWALT D510020 Bump Trigger Kit - Compatible with All DEWALT Nailers

• Service parts kits provide quick and easy on-site service

Takes only about 2-3 minutes to install. Perfect fit and works to perfection! Having the option of a bump trigger saves UNTOLD amounts of time, especially doing jobs such as nailing down backer board for vinyl flooring. Highly recommended.

Buy DEWALT D510020 Bump Trigger Kit - Compatible with All DEWALT Nailers Now

Perfect fit, 3 minute install. Should have installed the one I lost that came with my D51845 when I first bought it.

DEWALT D510020 Bump Trigger Kit Compatible with All DEWALT® Nailers