Milton 1108 1/2" Filter and Regulator Duo

• Milton 1108 1/2" Filter and Regulator Duo [Automotive]

Shipped fast, packaged well quality metal construction holds set pressure, only negative is no mounting bracket available from Milton and catch basin needed under filter to catch moisture from automatic drain.

Makita 5007MG Magnesium 7-1/4-Inch Circular Saw

• Quick change from 0 to 45 degrees and back using positive stops that are connected to easy-to-grip-levers
• Easy-to-read number and ruler markings on base and depth guide allow user to measure and follow cuts accurately
• Reinforced power cord withstands jobsite abuse
• Easy one-handed adjustments using large, rubberized levers
• 1 year warranty

I bought this saw about a month ago and I love that it is so light compared to the Milwaukee saws. I am normally a Milwaukee guy , but I wanted to try a different brand so I took a chance on Makita. I own a lot of Makita tools just not there saws . I am a carpenter and I need stuff to last because it gets used every day for 8+ hours. After I used the saw I love the balance and weight I also think the LED work light is a nice thing to have in low light conditions. All around I would recommend to all people that need a saw that is built to last!!!

Buy Makita 5007MG Magnesium 7-1/4-Inch Circular Saw Now

This is the best circular saw I have ever used. I used to own the previous version, 5007FK. I'm a homeowner, not a pro, and my old saw 'disappeared' when some contractors were at the house. I went for this upgraded model as a replacement and haven't been disappointed. I've used it on multiple projects (deck, bookcases, some light framing) and it is powerful and cuts true. It is a big improvement over the old version in several ways. The ergonomics are better, the adjustment levers are now rubber coated (used to be smaller hard plastic knobs), and the cast magnesium base is more solid than the old stamped aluminum base. Also, the blade guard is redesigned and no longer binds up on 2x material. Great saw. Highly recommended. Comparison shop against the Milwaukee and the Porter-Cable (forget the DeWalts) and you'll see this Makita comes in first. My only complaint is that the included blade is junk mine lost two carbide teeth on my first project. Ditch the blade for a good Irwin or DeWalt blade.

Read Best Reviews of Makita 5007MG Magnesium 7-1/4-Inch Circular Saw Here

I have used the current models of Dewalt, Hitachi and Milwaukee circular saws extensively, and this saw is hands down better than any of those. I use the saw every day,I have had this opportunity because my tools have been stolen a couple times(ouch)

The makita LXT impact and drill are so good that I thought I would try out this tool.

A list of what I noticed about this saw the first time I used it. I was astonished how quickly I noticed this stuff in use,

it seemed only all right when I checked it out at the store.

1. It has a silky smooth start up

2. It has excellent ergonomic grips

3. It is quieter and sounds better

4. It has an light to see your line, (much more useful than I thought it would be)

5. The adjustment levers function better and are easier to grab

6. Onboard storage for blade removal hex key

7. The angle adjustments and depth stop are easier to see.

8. It comes with the rip guide (much more useful that you would think)

9. The cord is installed to the body of the tool like they mean for it to stay and not fray

10. and does it ever cut smoothly,

it does not however have a electric brake, the 5007mga does though i believe.

This saw is on a different plane,

Thanks Makita engineers, you are making some amazing tools right now.

And other guys, come on seriously catch up.

Want Makita 5007MG Magnesium 7-1/4-Inch Circular Saw Discount?

I have used nothing but the base model makitas and have loved them. I was in the market for a new saw and thought this would be the top of all circular saws. It is great for bevels, very easy to set an accurate angle. Depth adjustment is a snap. Always having the wrench on the saw is a big plus.

The only problem that I have is the guard. I don't know if all the saws have this problem but my guard is always giving me problems. It just doesn't want to ride up as I make a cut.

As a precision-oriented professional home-remodeler, I finally got fed-up with the DeWalt 364 I had been using for the past 14 years. It is a rugged saw, to be sure, but I could never get it aligned properly, so ripping with the fence has always been an adventure. I finally gave up and just started ripping everything free-hand. Also, the blade would deflect terribly when ripping along a bevel. ANYWAY, I bought this Makita 5007MG and LOVE the saw. It's lighter, very well-balanced for me, and cuts incredibly accurately. The rubber grips everywhere are appreciated. The bevel lever and pre-set stops are great. Even the depth-of-cut guide is quite accurate. The led lights are a great bonus and are very effective even in total darkness. Oddly, they are on whenever the saw is plugged in, though led's do have a very long life, so this may be of little concern. All in all this saw is a pleasure to use, particularly for me as a left-hander--very easy to see the line-of-cut. I'm not sure why the complaint from another lefty in another review.

Where this package falls short is in the case, the rip guide, and the cord. The case is the same old generic case Makita has been using for all its sidewinders for years. The saw barely fits, and there's virtually no room for blade storage--2 blades max. I like to have beater blades, new blades, masonry blades, finish blades all in the case. As for the rip fence, it's pretty minimal. The arm is so short that its max rip is a measly 7 or 8 inches. Also, the most you can rip to the right of the blade is 3", and the least you can rip to the left is 3 5/8". The range in between is missing altogether. The hook which allows the fence to slide in under the saw's sole plate should be bent slightly longer to allow you to shove it all the way over, tighten the nut, and rip an accurate 3 1/2"--handy for plywood filler strips for 2x4 framing. Lastly, even though the saw is double-insulated and doesn't require a three-prong cord, it should have one. Even if the ground prong is a dummy prong, it sure helps any tool stay plugged into an extension cord. Hopefully, Makita will figure this stuff out. I should send these comments to the company. Buy the saw anyway. It's a great one.

PneumaticPlus SAR4000M-N04BG Air Pressure Regulator 1/2" NPT with Gauge & Bracket

• Pressure Regulating Range:7.25 to 123 PSI
• Flow Rate: 210 SCFM
• Port Size:1/2" NPT
• Includes 0 - 150 PSI Pressure Gauge & Bracket
• 1 Year Limited Warranty.Manufactured In Korea

The regulator knob extends for adjustment with a satisfying 'click', exposing the red ring to indicate you are able to adjust. The pressure is changed easily with a few twists of the knob, after which it clicks back into the locked position with a firm snap.

Very solidly built -far better than the small, wobbly junk you can get at the local big box.

Not shown in the picture (though included in the description) is a nice pressure gauge as well as a chrome (not black, as in the picture) mounting bracket.

Buy PneumaticPlus SAR4000M-N04BG Air Pressure Regulator 1/2" NPT with Gauge & Bracket Now

Nice solid regulator. I used it to swap out an older, leaking regulator made by another manufacturer. This PneumaticPlus SAR4000M-N04BG is way nicer. Comes with the mounting bracket which is nice. The adjustment knob is big and feels solid in the hand. Pops up and down with a satisfying "click". The ring indicating that the knob is in the "adjustment" mode is a nice feature. No annoying Leaks. I wish I had spent some time on their website and actually purchased one of their "Air Unit" (Filter Regulator Lubricator) products instead. For a little more money I could have had this quality in all three units instead of having just this awesome regulator now sitting between a cheaper filter and lubricator. Oh well, when those others fail, I'll go back to PneumaticPlus for replacements. No more blue for me.

I am very happy with the purchase especially considering the price and the free shipping. I think the quality and value is above all the others I researched.

Little tips: 1) The regulator IS Directional. If you install it backwards (as I did originally), it does not function correctly. There is a little arrow on the bottom indicating the proper direction of air flow. If you need to install the gauge on the other side, simply remove the plug which is in there and place the plug in the other hole and the gauge in the hole where the plug was. 2) The regulator is available with different inlet and outlet sizes. Get the right one for your setup and save yourself a trip to the hardware store for adapters.

Read Best Reviews of PneumaticPlus SAR4000M-N04BG Air Pressure Regulator 1/2" NPT with Gauge & Bracket Here

In need for a spar regulator for a air tank I just got free. Hooked this one up and it worked just great. Thanks for a great price and a speedy shipment.....!!!

Want PneumaticPlus SAR4000M-N04BG Air Pressure Regulator 1/2" NPT with Gauge & Bracket Discount?

This regulator is very well made and exceeds my expectations. In my opinion the price was better than others of lesser quality.

Bon-Aire WH160C 12V Air Compressor

• Inflates vehicle tires, bike tires, sports balls and more
• Powerful motor - 120 Volts
• Lighted pressure gauge for easy reading
• On-board accessories storage - off/auto on rocker switch
• Built-in power cord and air hose wraps

I bought this air compressor at Costco and I'm not sure why the previous reviewer thought a clamp could be clipped on the air hose. It wouldn't maintain a proper seal that way under the amount of air pressure going through the hose. The Bonaire rep was correct in saying that the clamp is permanently attached to the hose. Mine works great and I'm very happy with it!

Buy Bon-Aire WH160C 12V Air Compressor Now

This Bonaire compressor came without a valve attachment clamp (the thing that connects the hose to your tire). I called Bonaire and they were very UN-helpful, saying I could NOT have purchased this from Amazon and that they only sell this to Target stores.

So, I ask -can I just purchase a replacement valve attachment? "NO," she says, "that part comes permanently attached to the hose." I could clearly see that this thing just clipped on, but this person just plain refused to check or help in any way. With a real bad attitude.

This seems like it might be a decent air compressor, at a reasonable price, but I think the Bonaire Customer Service is non-existent. And reflects on the product as well.

Read Best Reviews of Bon-Aire WH160C 12V Air Compressor Here

Great little air compressor works on big stuff and small things very handy.Great to have around house and on boat .

Want Bon-Aire WH160C 12V Air Compressor Discount?

Works like a charm. Accurate readout. I use it two or three times a week to get my bike tires up to 120 lb. Only negative is that it does not work on Schrader valves without an adapter. But not really a problem as they cost a dollar or two at a bike shop.

Save 41% Off

Light weight, super easy to use. Great for pumping up balls, bikes, etc... Without having to get out my big heavy compressor.