Factory-Reconditioned Campbell Hausfeld HG300000RB 8 Gallon 200 PSI Oil-Free Wheeled Vertical Air Co

• 40% longer air tool run time
• Save space in your garage with compact vertical tank design
• Easy-to-use 2-1/2-in soft-touch regulator knob for more comfortable pressure adjustments
• Easy-to-read 2-in outlet pressure gauge
• No maintenance oil-free pump

When they say factory reconditioned, I assume that it means made to look and operate like new. When I received this compressor the wheels were broken, it had dents and it leaks. I'm not real impressed with their "Factory Reconditioning"

Buy Factory-Reconditioned Campbell Hausfeld HG300000RB 8 Gallon 200 PSI Oil-Free Wheeled Vertical Air Co Now

Ordered a Referb unit, I received a unit that looks NEW, not a scratch or flaw. After initial setup and run in, compressor buit up to 200 psi and on again at 165 psi, fast ship (3 days,)very pleased. Thanks Amazon and CPO Outlets.

Makita 5007MG Magnesium 7-1/4-Inch Circular Saw

• Quick change from 0 to 45 degrees and back using positive stops that are connected to easy-to-grip-levers
• Easy-to-read number and ruler markings on base and depth guide allow user to measure and follow cuts accurately
• Reinforced power cord withstands jobsite abuse
• Easy one-handed adjustments using large, rubberized levers
• 1 year warranty

I bought this saw about a month ago and I love that it is so light compared to the Milwaukee saws. I am normally a Milwaukee guy , but I wanted to try a different brand so I took a chance on Makita. I own a lot of Makita tools just not there saws . I am a carpenter and I need stuff to last because it gets used every day for 8+ hours. After I used the saw I love the balance and weight I also think the LED work light is a nice thing to have in low light conditions. All around I would recommend to all people that need a saw that is built to last!!!

Buy Makita 5007MG Magnesium 7-1/4-Inch Circular Saw Now

This is the best circular saw I have ever used. I used to own the previous version, 5007FK. I'm a homeowner, not a pro, and my old saw 'disappeared' when some contractors were at the house. I went for this upgraded model as a replacement and haven't been disappointed. I've used it on multiple projects (deck, bookcases, some light framing) and it is powerful and cuts true. It is a big improvement over the old version in several ways. The ergonomics are better, the adjustment levers are now rubber coated (used to be smaller hard plastic knobs), and the cast magnesium base is more solid than the old stamped aluminum base. Also, the blade guard is redesigned and no longer binds up on 2x material. Great saw. Highly recommended. Comparison shop against the Milwaukee and the Porter-Cable (forget the DeWalts) and you'll see this Makita comes in first. My only complaint is that the included blade is junk mine lost two carbide teeth on my first project. Ditch the blade for a good Irwin or DeWalt blade.

Read Best Reviews of Makita 5007MG Magnesium 7-1/4-Inch Circular Saw Here

I have used the current models of Dewalt, Hitachi and Milwaukee circular saws extensively, and this saw is hands down better than any of those. I use the saw every day,I have had this opportunity because my tools have been stolen a couple times(ouch)

The makita LXT impact and drill are so good that I thought I would try out this tool.

A list of what I noticed about this saw the first time I used it. I was astonished how quickly I noticed this stuff in use,

it seemed only all right when I checked it out at the store.

1. It has a silky smooth start up

2. It has excellent ergonomic grips

3. It is quieter and sounds better

4. It has an light to see your line, (much more useful than I thought it would be)

5. The adjustment levers function better and are easier to grab

6. Onboard storage for blade removal hex key

7. The angle adjustments and depth stop are easier to see.

8. It comes with the rip guide (much more useful that you would think)

9. The cord is installed to the body of the tool like they mean for it to stay and not fray

10. and does it ever cut smoothly,

it does not however have a electric brake, the 5007mga does though i believe.

This saw is on a different plane,

Thanks Makita engineers, you are making some amazing tools right now.

And other guys, come on seriously catch up.

Want Makita 5007MG Magnesium 7-1/4-Inch Circular Saw Discount?

I have used nothing but the base model makitas and have loved them. I was in the market for a new saw and thought this would be the top of all circular saws. It is great for bevels, very easy to set an accurate angle. Depth adjustment is a snap. Always having the wrench on the saw is a big plus.

The only problem that I have is the guard. I don't know if all the saws have this problem but my guard is always giving me problems. It just doesn't want to ride up as I make a cut.

As a precision-oriented professional home-remodeler, I finally got fed-up with the DeWalt 364 I had been using for the past 14 years. It is a rugged saw, to be sure, but I could never get it aligned properly, so ripping with the fence has always been an adventure. I finally gave up and just started ripping everything free-hand. Also, the blade would deflect terribly when ripping along a bevel. ANYWAY, I bought this Makita 5007MG and LOVE the saw. It's lighter, very well-balanced for me, and cuts incredibly accurately. The rubber grips everywhere are appreciated. The bevel lever and pre-set stops are great. Even the depth-of-cut guide is quite accurate. The led lights are a great bonus and are very effective even in total darkness. Oddly, they are on whenever the saw is plugged in, though led's do have a very long life, so this may be of little concern. All in all this saw is a pleasure to use, particularly for me as a left-hander--very easy to see the line-of-cut. I'm not sure why the complaint from another lefty in another review.

Where this package falls short is in the case, the rip guide, and the cord. The case is the same old generic case Makita has been using for all its sidewinders for years. The saw barely fits, and there's virtually no room for blade storage--2 blades max. I like to have beater blades, new blades, masonry blades, finish blades all in the case. As for the rip fence, it's pretty minimal. The arm is so short that its max rip is a measly 7 or 8 inches. Also, the most you can rip to the right of the blade is 3", and the least you can rip to the left is 3 5/8". The range in between is missing altogether. The hook which allows the fence to slide in under the saw's sole plate should be bent slightly longer to allow you to shove it all the way over, tighten the nut, and rip an accurate 3 1/2"--handy for plywood filler strips for 2x4 framing. Lastly, even though the saw is double-insulated and doesn't require a three-prong cord, it should have one. Even if the ground prong is a dummy prong, it sure helps any tool stay plugged into an extension cord. Hopefully, Makita will figure this stuff out. I should send these comments to the company. Buy the saw anyway. It's a great one.

Campbell Hausfeld Mesh Filters - 100-Mesh, 2-Pk., Model# AL086101AJ

the photo and word description of the filter required made it easy to select the right product and when the filters arrived they were in good condition and fit right in place

110V PLASMA CUTTING SYSTEM WITH BUILT-IN COMPRESSOR

This is really going to be a handy tool.Ive had a chance to play with it a little.Cuts 1/4" steel plate cleanly! Ive also tried it on 14 gauge SS on 15 amps,works great!It will even cut 1/2" mild steel round stock clean.Onboard air comp runs smooth and keeps up with the torch no problem (one of my worrys with onboard air).Its cutting capacity excedes what I thought it would do.It seems just as powerful as my hypertherm 350,but more portable.Worth every penny!!

Excellent machine! It cuts 1/8" all day and will cut up to 1/4". I've cut bigger with more than one pass. I wish the duty cycle was a bit better but for a 110/120 volt unit I have no complaints. It'll cut pipe, plate, bolts, and make perfect holes for bolts. Great for fabrication work. Light weight and portable.

Buy 110V PLASMA CUTTING SYSTEM WITH BUILT-IN COMPRESSOR Now

I just purchased it at an Ace Hardware Store, I told the guy selling it, The owner of the store. That I was buying on his word. He stated that he has sold at least 12 of these with no complaints or returns. I then told him I was buying because of what he said and also he is local and will stand behind what he sells. We will see, I paid $599.00 + Tax. The price was also the reason, I know they usually run more than that. OK Sorry not more of a hands on use kind of review, but I hope it helps someone. OK Art

**Update It was used 6 times and stopped working. spent its life in the box in styrofoam. I took it back to the store. The owner of the store or the rep from forney got a tech on the phone and without opening up the unit decided that the computer board is cracked and I must have dropped it and they are not covering the warranty. I'm out $600.00 for something that I thought was going to be fun to use and read everybody elses review and said wow, great unit. I don't know what unit they were using but it can't be this one. this is a substandard unit. Save your money. You get what you pay for. I was able to cut metal faster with a cut wheel and cleaner, kept blowing the breaker. I hope they print this review so you can see both sides of the unit. I'm shocked at Forney for not standing behind the warranty. Hobart is also Forney, guts of unit are the same unit. This is exactly what I was afraid of happening, OK now I'm ranting. Good Luck Buy something else, do youself a favor.

Read Best Reviews of 110V PLASMA CUTTING SYSTEM WITH BUILT-IN COMPRESSOR Here

TEKTON 4583 In-Line Air Filter

• Traps and Removes Harmful Water Vapor and Debris Particles from Compressed Air Supply
• Metal Outer Shield Protects Internal Filter Unit
• Easy-Clean Filter with Brass Drain Valve
• Delivers Clean Air Supply to Maximize Tool Performance
• Protects Hoses, Tools, and Accessories from Excessive Wear and Damage

Like the other reviewer mentioned, the threads are non-standard. I wasted time and money trying multiple options to get a 3/8" fitting to work, NPT or flanged, doesn't matter.

Cheapo steel filter bowl protector is hard to attach and remove. I regret throwing away the packaging or it would send it back in a heartbeat (unused).

I wish I could rate it "zero" stars. One is way too many

.

Buy TEKTON 4583 In-Line Air Filter Now

Probably the worst purchase I've made on Amazon. The threads are terrible so it took a while to get it sealed even using brass couplings and Teflon tape. After a few uses the unit started leaking from where the plastic cup seals onto the housing so I'm now looking for a replacement.

Read Best Reviews of TEKTON 4583 In-Line Air Filter Here

This has been installed for over a year in my shop and hasn't leaked or let any water through. Its a great size and was really easy to install. There isn't much more to say, its built well and does the job.

Want TEKTON 4583 In-Line Air Filter Discount?

Plastic bowl, plastic drain. Brass filter element. Paid $20. Too lazy to return. I will see if it holds up.

12 Volt Mini Automotive Air Compressor Complete with a 0-250 psi Gauge.

• Mini Air Compressor Nifty device that takes maxi air and squeezes it down into a mini condition. The device is roughly 6-1/2"" long x 6" tall x 4" wide. It has a 10 ft.
• cord that plugs into an auto lighter socket: i.e it runs on 12VDC @ 10 amps. Air output is via a 12" hose with a variety of valve adapters for tires, soccer balls, rubber rafts, and just dusting off the environment.
• Complete with a 0-250 psi gauge. Which should be plenty of pressure to explode a weak bike tire or flimsy beach ball, so please be careful!

TO FOREVER TO TO PUMP UP TIRE IT MIGHT BE COOL FOR A BIKE , BUT NOT FOR A CAR TOOK SO LONG i ENDED UP GOING TO GAS STATION , i CANT RECOMMEND IT

Buy 12 Volt Mini Automotive Air Compressor Complete with a 0-250 psi Gauge. Now

S-L-O-W-L-Y

Bring a book.

I would call this emergency equipment, in a pinch it will inflate a car tire but at first I thought it didn't work, then five minutes in I noticed the gauge come off the pin. I was inflating a compact car tire from 15 lbs, I would guess 10 15 minutes to 26 lbs. The gauge is impressive looking but 5 lbs low. The cord is somewhat short to get from the lighter socket to the spare hung on the rear gate. It gets HOT when you run it Esp the fitting where the hose comes off the pump. The chuck is very tight, requiring some force to really put on and remove. My recommendation: spend more money and get a real one if you need to inflate things in a reasonable amount of time.

Read Best Reviews of 12 Volt Mini Automotive Air Compressor Complete with a 0-250 psi Gauge. Here

Works fine so far. as usual these cheap compresers air gauge is junk. and on thing i would add to this is an on and off switch.