DEWALT D55140 1-Gallon 135 PSI Max Trim Compressor

• Heavy-duty 1-gallon trim compressor with protective roll cage
• 135 psi maximum; durable oil-free pump; low 69 dB rating; low 2.6 amp motor
• Cast-iron construction
• Includes 1 compressor; hose & nailer not included
• 9-inches wide; 24 pounds; 1-year warranty

This compressor is fairly powerful, when it works... if you'll notice, a lot of people have problems with this unit quitting working after a certain amount of time, and here's the reason and the fix for those who are at all curious...

There's something wrong with the way this unit draws power, which causes a short in the circuit board. The board gets overloaded if you leave it on, and the fuse blows. No fuse means the unit stops working completely. You can replace the fuse (I believe it's a 5 amp fuse) on the inside but it will blow again after a matter of time (like I said, a defect in the circuitry...)

It is something of a pain to open this compressor up and work on it. I installed a plate on the outside that holds the bottom plastic back together, and removed the stock compression clamps on the hoses and replaced those with screw down hose clamps. Now the unit is easier to open than it was before..but it is still something of a nuisance to open it up and fix it.

To fix this (somewhat) permanently, I soldered wire on either side of the circuit board, and moved the fuse to the outside of the unit. The fuse is now accessable directly on the ouside of the case (between the tank and the knobs) and when it blows, I can simply replace it with another fuse for about $0.80.

A more permanent solution would be to put a 5A breaker on the outside, so you just have to flip a switch when it pops...but I haven't gotten to that point yet.

.......even with this fix, I would still reccomend staying away from this compressor. It IS ultra portable and when it's working it's great for trim and light work, but who wants to open up an air compressor to fix something that should have been either caught by Quality Control or recalled entirely?

Buy DEWALT D55140 1-Gallon 135 PSI Max Trim Compressor Now

great for all trim jobs one man small gun

will do anything with a nail gun

yes even a framing gun

just work slow

6 nails a min

very quiet sounds like a washing machine

very light

and feels solid

only rated for 500 hrs

Read Best Reviews of DEWALT D55140 1-Gallon 135 PSI Max Trim Compressor Here

Got this compressor last christmas so haven't had it that long yet, but so far it's worked without a hitch. This is a nice little compressor for trim jobs. It's very easy to carry around because of its light weight. It fills up fast and is rather quiet. Got all new windows in my house and have had to case them all. No problems using my trim nailer with this compressor, it would go on about every 7 shots. I highly recommend this compressor for light trimming jobs.

Want DEWALT D55140 1-Gallon 135 PSI Max Trim Compressor Discount?

a nice lite weight compressor perfect for any size trim job. Plenty of power to run a finish gun or pin nailer. I haven't had the compressor that long but I just installed 700' of baseboard and was quite satisfied the way it performed.

Save 56% Off

I bought this compressor because it is one of the smallest available, yet it is well made for professional use. This is all you need if you don't have permanent air use like in a home workshop. Since it is so small you can easily carry it around to the point of use. I use this compressor for example to keep my car tires in spec. It is so much of a hassle to do that at the gas station (and I am anyway always in a hurry at the gas station). You just charge the compressor tank, unplug the cord and carry the compressor to the tires. The one gallon tank is easily big enough for all tires of my 2 cars (incl. spares). The compressor is very well sealed, I tested that the pressure of initially 140psi does not drop below 125psi in two days.

Milton S220 Compressor Accessory Kit

• An accessory kit that includes almost everything you need for your air compressor
• Lets you inflate and check tire pressure, blow debris, inflate sports equipment, quickly connect air tools, and more
• Quick-change template guide
• Includes blowgun, male hose end and mender, female hex coupling, male hex nipple, female air chuck, 2 M-style male and female quick coupler bodies, 3 M-style male coupler plugs, tire gauge, adapter, and inflator pin
• All couplers and fittings in outfit are 1/4-Inch

This is a good place to start your air accessory collection, although I would modify it a little to make it more useful. I bought it to complement my Porter Cable 3hp compressor, which is equipped with M-style quick connects.

It has two accessories that require a male M-style coupler plugs, (the blow gun and tire chuck), but only three of this style coupler plug. If you have more than one air tool to setup, you will need additional male M-style coupler plugs (Tool Crib #727BK @$1.00). The plastic tire pressure gauge is functional, but nothing special.

The brass hose repair barbs are nice, but there are no hose clamps provided if you have to use them. I would be hesitant to put them under pressure without a band clamp holding them in place. The two female couplers and female coupler plugs will complete two 3/8" air hoses.

The blow gun is a quality, versatile unit. It comes with a rubber tip, metal tip and pin inflator for balls. The valve is easily operated and it does not leak.

With the exception of the plastic tire gauge, all the parts are high quality and useful. I could have done without the tire gauge in exchange for a few more quality parts (male coupler plugs and screw type band hose clamps). If the assortment had been a little more complete, this would rate five stars. You will also need a roll of teflon plumbers tape to seal all the threads. Now you know what else you need to finish outfitting your compressor.

Buy Milton S220 Compressor Accessory Kit Now

Wish I bought just the stuff I needed at Home Depot. Would have saved some money. Quality was not a problem though I have no use for the tire pressure guage.

Read Best Reviews of Milton S220 Compressor Accessory Kit Here

I looked far and wide for American made compressor accessories. Sadly most every thing available locally was made in China. Found these Milton brand and bought them. High quality pieces and all are great quality. Well made to stand the test of time. I highly recommend these. You can buy cheaper but not better.

Want Milton S220 Compressor Accessory Kit Discount?

I've never had a bad Milton part or fitting. This is a no brainer vs the cheap junk. Buy it.

This is a great collection of connectors and accessories. If you buying a compressor -get this product also. It has just about everything you need to make fast connections, fill tires, etc.