Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner

• Powerful motor penetrates fasteners through the hardest materials
• Shoots fasteners up to 1-3/8-inch length easily, even-inch hardwoods
• Patented design eliminates need to adjust for different fastener lengths
• Double trigger safety prevents accidental firing of tool
• Narrow nose reaches tight areas and corners for detailed trim work

I am simply amazed by this pinner. I have used many others with less features and the Grex p635 is a hands down winner. Few manufacturers offer a 23ga pinner as versatile as the P635 with the capability to shoot 3/8 to 1 3/8 pins and self adjusting to boot. No splitting of crown or delicate hardwood mouldings even within 1/8" of an end mitre. I have pretty much retired my 18ga brad nailer for high end trim in leu of the Grex P635. I am impressed with the holding power of the 23 ga pins in hardwood crown on cabinet installs. As a professional wood worker I highly recommend this pinner.

Buy Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner Now

I was introduced to this nail gun at my last job. Now that I am in business for myself, I had to get one. I have used the Senco and the Grex 23g micro pinners. The Sencos that we had at the shop hardly ever worked properly. They weren't self-adjusting, so changing nail lengths was a pain. And, the nail heads almost always stayed above the surface of the material. The Grex, however is self adjusting, and goes all the way from 1/4" to 1 3/8" nail lengths. Even in the hardest wood it always sinks the heads. The only time it hasn't was when I was shooting into maple at a harsh angle, or when the compressor didn't come back on and there wasn't enough pressure. Also, I have had the gun for 2 months and used it almost every work day since then, and I have only had one minor jam. Plus, just the fact that you don't have to fill every nail hole with putty makes this tool a life saver.

Read Best Reviews of Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner Here

I purchased Senco, Porta-Cable, Bostitch, Omer, and Grex. Grex by far is the best! It doesn't jam, or break down. Very reliable and saves me money over the long run from not repairing it every week. Before the P635 my porta-cable and omer both gave me the biggest problems. The Grex gets into the corners and doesn't leave a mark into the finished product. I have owned them for 2 years and now getting one for my father. Also, I have been burned by the big auction web site(won't name names)trying to buy this tool.

Want Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner Discount?

(see revision below) I wasn't led astray by others who raved about this 23 gauge pinner. It saved the day as far as doing an intricate exterior Ipe handrail with polyurethane glue. No other brad or nailer would work except my old Senco 1/2 thru 3/4 inch pinner and it leaked and didn't have the power of this new one. With no time to use small screws and countersinks nor tenoning, I found that using toe nailed 23 guage pins with polyurethane glue really held together this hard-as-nails exterior hardwood.

The only small problem was when adding a new shank of pins to a nearly empty gun.. that when the previous shank was used up the new shank due to the smallest misalignment wouldn't pin.. .not a biggy..It just meant one had to very carefully load the pinner and make sure the same size of pins was in-line with the prior shank of pins. Very hard to tell if the gun is firing or not. But minor concerns with such a Great Tool! It's very powerful judging at the strength of penetration into a wood (Ipe) that is very close to being the hardest of woods. 18 guage would shatter and split the wood and only my battery actuated Dewalt 16 guage gun would consistantly penetrate but only at a right angle and with occasional splitting. Only 23 guage pins would toe nail w/o bouncing off.

Someone described this as the "Lexus of pinners". Seems very true. Also the extra finger safety 'flipper' was annoying and my helper just taped it to the handle as we found that it was more likely to accidently fire with the intricacy of manipulating the safety on than having it taped off (down). Works now very well. No hitches. Comes with the usual leaky bottle of oil..but not even one pin in the box. Make sure you order some if you don't have 'em when ordering this gun.

after a month or so...revised review. Now the Grex no longer shoots pin to the surface...pins are proud a good 1/16. Opened it up and the first part of the pin driver is shattered. Thus needing a new piston pin, Amazon does carry it. But was the wood too hard (Ipe) on the pinner or is it just a bad design? Remember my old Senco still shoots pins but only is a half through three quarter pinner. I'd have to demote Grex to two stars. The pin driver seems only meant for softer woods. Need to find paperwork as no local dealer sells Grex or contact manufacturer.

Save 28% Off

After asking around on woodnet i found that this one is the only one that does not leave a small dent from the driving pin( at least in this price range)

the one drawback to all of these micro pinners is that you cant control the depth of the pin

it will never go more than about a 32nd into the wood

not quite enough for filler

GOODYEAR 46545 3/8-Inch by 50-Feet 300 PSI Rubber Air Hose With 1/4-Inch MNPT Ends and Bend Restrict

• Solid Brass End Fittings: 1/4-Inch MNPT
• Spiral Synthetic Yarn Reinforcement
• Abrasion-Resistant Rubber Outer Jacket
• Bend Restrictors Prevent Kinks Near End Fittings
• 100% Made and Assembled in the USA

Works great. Does what a hose should. Flexible in the cold and easy to roll up when finished with the project.

Buy GOODYEAR 46545 3/8-Inch by 50-Feet 300 PSI Rubber Air Hose With 1/4-Inch MNPT Ends and Bend Restrict Now

I was looking for a rubber air hose when my poly one burst on me during a very cold spell. I was looking for a hose that would be flexible during the cold months (in Michigan that is about half of them). I went to a home store, but they didn't have any in stock that day, so I went to the web. The price was the same for a much better product that was made in the USA. I chose this one over the other one on Amazon, because many people claimed the cheaper price was a counter fit. It may have been the same, but I don't believe in companies (or certain countries) putting a good name on a cheap rip off.

I checked it out the day I got it and it was very flexible in the cold weather and seemed very sturdy.

Read Best Reviews of GOODYEAR 46545 3/8-Inch by 50-Feet 300 PSI Rubber Air Hose With 1/4-Inch MNPT Ends and Bend Restrict Here

Great product, durable, no leaks, has brass threads for a tight seal for couplings or stems. 10 year warranty a big plus. Not actually made by Goodyear, it's made by a second party under a licensing agreement. The price at Amazon was way lower than Auto Parts store pricing. I'm happy with this purchase.

Want GOODYEAR 46545 3/8-Inch by 50-Feet 300 PSI Rubber Air Hose With 1/4-Inch MNPT Ends and Bend Restrict Discount?

Good connectors,sturdy construction,doesn't whip or kink easily. Using 2 in my shop and guys like them. Wish I could get longer ones. Have 3 total and some 25' and shorer lengths as well. I heard from rep that longer lengths are available and found the 100'. I will use those for permanent installs but the weight is too much on portable tool connections if you have too much hose.

I hang the hose from the roof 45 feet up too and think that's all the weight I want overhead. Very sturdy stuff, I ran over it with 1/2 ton pickup w. no problem...But...don't run over it with your forklift, not indestructible. Do make sure to be careful when adding or removing connectors as brass is soft by design. I just put one steel connector on both ends w. Teflon tape and leave it there. I also support the ends with nylon cord holding a little loop of slack where it connects to the air outlet. Not totally necessary but we pull on that end constantly while using tools so why put stress on the connectors when the hose will take it much better ?

Nuch higher quality than the old red or new China stuff ( leaks-like-sieve special ). Is there a bigger diameter w. stiffer jacket for use as heavy duty air plumbing ? Better than RapidAir or other "modular" systems ? I'd be interested.

Save 56% Off

It's doesn't feel and look like a cheaply, made in China junk. I'm looking forward to many years of problem-free usage of this product. I would always prefer products or tools made in USA for their durability and reliability, and most of all to keep the jobs here for all Americans.