Showing posts with label viair air compressor. Show all posts
Showing posts with label viair air compressor. Show all posts

Thursday, July 17, 2014

Aero Air Pump with Flashlight

Aero Air Pump with FlashlightIt's a great pump

But it does not fit my Aerobed, which is obviously an 'older' model withthe twist lock valve and a wide nozzle.

The adapters that came with the Pump, won't fit into or over the filler cap.

I'll make it work, but it is disappointing that I wasn't made aware of this simple fact in the product description, as I would then have purchased any of a number of other similar and cheaper pumps

as I am not in a position to return the pump ( live far far away) I guess I have to adapt the adaptor to fit! We are good at that kind of think in this part of the world

I have this model pump, but it came with a queen sized Aerobed mattress that cost about $90. Not sure why the pump alone would be $30 plus shipping. It worked well for a year and a half, but died abruptly. I assumed the batteries were dead, so I replaced them, but no dice. The flashlight still works, but the air is completely dead. I've used it fewer than a dozen times. I ordered a Coleman replacement, hopefully that will last.

Buy Aero Air Pump with Flashlight Now

The product is light weight comes with the car charger and different inserts for other inflatables, it is an out-door product! the lights do not work without (8) C batteries in which the lights are pretty bright in which i was amazed! worth the purchase.

Read Best Reviews of Aero Air Pump with Flashlight Here

Wednesday, July 9, 2014

Makita 3606 7.0 Amp 1 HP Router

Makita 3606 7.0 Amp 1 HP Router
  • Contoured double handles for comfort and control
  • Large calibrated depth control ring
  • Shaft lock for quick changing of bits with just one wrench
  • 3-1/2" diameter detachable motor for use on commercial router bases
  • Hi-speed motor for powerful smooth cuts

For what this is, it is an excellent little beast.

It does its little tasks perfectly; I keep it for hinges and lock keeps. I set the depth at the beginning of the job and never have to change it. My more expensive and heavier router stays in the box.

Weighs nothing and with the right bit it saves me a fair amount of work.

Buy it without thinking too long or deep.

Buy Makita 3606 7.0 Amp 1 HP Router Now

All my routers are Makita and they're all a pleasure to use. This one is no different. I wanted something I could put a template on to rout door hinges. This is light weight and great for that job. Just beware it only accepts 1/4 inch bits.

Read Best Reviews of Makita 3606 7.0 Amp 1 HP Router Here

I bought this router for my husband for Christmas. He makes wood signs and needed a light weight router for carving. He put the Makita 3606 router on his wish list but thought it might be expensive since you can only get them from the manufacturer or independent wood shops. I found it on Amazon for an amazing price and he was so excited on Christmas morning. He has already made a few signs for our friends with it and he LOVES it!! This was a GREAT BUY!!!!

Want Makita 3606 7.0 Amp 1 HP Router Discount?

If you are looking for a small router for free hand routing such as sign making, this one will do the job. small enough to handle yet plenty of power to do the job. like most makita tools that i own its well built for years of use.

Save 25% Off

The router has been very reliable in the past 2 yrs. No complaints from our customers in performance or reliability.

Leo Wissler

Sunday, May 25, 2014

Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner

Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner
  • Powerful motor penetrates fasteners through the hardest materials
  • Shoots fasteners up to 1-3/8-inch length easily, even-inch hardwoods
  • Patented design eliminates need to adjust for different fastener lengths
  • Double trigger safety prevents accidental firing of tool
  • Narrow nose reaches tight areas and corners for detailed trim work

I am simply amazed by this pinner. I have used many others with less features and the Grex p635 is a hands down winner. Few manufacturers offer a 23ga pinner as versatile as the P635 with the capability to shoot 3/8 to 1 3/8 pins and self adjusting to boot. No splitting of crown or delicate hardwood mouldings even within 1/8" of an end mitre. I have pretty much retired my 18ga brad nailer for high end trim in leu of the Grex P635. I am impressed with the holding power of the 23 ga pins in hardwood crown on cabinet installs. As a professional wood worker I highly recommend this pinner.

Buy Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner Now

I was introduced to this nail gun at my last job. Now that I am in business for myself, I had to get one. I have used the Senco and the Grex 23g micro pinners. The Sencos that we had at the shop hardly ever worked properly. They weren't self-adjusting, so changing nail lengths was a pain. And, the nail heads almost always stayed above the surface of the material. The Grex, however is self adjusting, and goes all the way from 1/4" to 1 3/8" nail lengths. Even in the hardest wood it always sinks the heads. The only time it hasn't was when I was shooting into maple at a harsh angle, or when the compressor didn't come back on and there wasn't enough pressure. Also, I have had the gun for 2 months and used it almost every work day since then, and I have only had one minor jam. Plus, just the fact that you don't have to fill every nail hole with putty makes this tool a life saver.

Read Best Reviews of Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner Here

I purchased Senco, Porta-Cable, Bostitch, Omer, and Grex. Grex by far is the best! It doesn't jam, or break down. Very reliable and saves me money over the long run from not repairing it every week. Before the P635 my porta-cable and omer both gave me the biggest problems. The Grex gets into the corners and doesn't leave a mark into the finished product. I have owned them for 2 years and now getting one for my father. Also, I have been burned by the big auction web site(won't name names)trying to buy this tool.

Want Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner Discount?

(see revision below) I wasn't led astray by others who raved about this 23 gauge pinner. It saved the day as far as doing an intricate exterior Ipe handrail with polyurethane glue. No other brad or nailer would work except my old Senco 1/2 thru 3/4 inch pinner and it leaked and didn't have the power of this new one. With no time to use small screws and countersinks nor tenoning, I found that using toe nailed 23 guage pins with polyurethane glue really held together this hard-as-nails exterior hardwood.

The only small problem was when adding a new shank of pins to a nearly empty gun.. that when the previous shank was used up the new shank due to the smallest misalignment wouldn't pin.. .not a biggy..It just meant one had to very carefully load the pinner and make sure the same size of pins was in-line with the prior shank of pins. Very hard to tell if the gun is firing or not. But minor concerns with such a Great Tool! It's very powerful judging at the strength of penetration into a wood (Ipe) that is very close to being the hardest of woods. 18 guage would shatter and split the wood and only my battery actuated Dewalt 16 guage gun would consistantly penetrate but only at a right angle and with occasional splitting. Only 23 guage pins would toe nail w/o bouncing off.

Someone described this as the "Lexus of pinners". Seems very true. Also the extra finger safety 'flipper' was annoying and my helper just taped it to the handle as we found that it was more likely to accidently fire with the intricacy of manipulating the safety on than having it taped off (down). Works now very well. No hitches. Comes with the usual leaky bottle of oil..but not even one pin in the box. Make sure you order some if you don't have 'em when ordering this gun.

after a month or so...revised review. Now the Grex no longer shoots pin to the surface...pins are proud a good 1/16. Opened it up and the first part of the pin driver is shattered. Thus needing a new piston pin, Amazon does carry it. But was the wood too hard (Ipe) on the pinner or is it just a bad design? Remember my old Senco still shoots pins but only is a half through three quarter pinner. I'd have to demote Grex to two stars. The pin driver seems only meant for softer woods. Need to find paperwork as no local dealer sells Grex or contact manufacturer.

Save 28% Off

After asking around on woodnet i found that this one is the only one that does not leave a small dent from the driving pin( at least in this price range)

the one drawback to all of these micro pinners is that you cant control the depth of the pin

it will never go more than about a 32nd into the wood

not quite enough for filler

Sunday, March 23, 2014

Ampro A1441 PTFE Seal Tape 1/2-Inch X 260-Inch

Ampro A1441 PTFE Seal Tape  1/2-Inch X 260-Inch
  • Adds extra seal at threaded joints

Purchased this product and used it to install a shower head. It has been in my shower for more than a month now without any leaks or problems: I also recommend this product.

Buy Ampro A1441 PTFE Seal Tape 1/2-Inch X 260-Inch Now

I used this tape to install a shutoff valve. The tape does the job. Not really much else to say.

Read Best Reviews of Ampro A1441 PTFE Seal Tape 1/2-Inch X 260-Inch Here

This seal tape was perfect for sealing faucet and shower head threads.It comes with a little protective case (white shown in picture), and the tape works totally as advertised. I had no problems with it at all.

Want Ampro A1441 PTFE Seal Tape 1/2-Inch X 260-Inch Discount?

Just what I ordered....What more to say about plumbers tape?, works just as advertised....Works just fine....Works just fine....I would use this seller again...

This product worked and I will most certainly buy this again. I recommend this product to anyone. I use it to make Tiki torches out of empty wine bottles. Ampro Seal Tape, does exactly what it needs to!

Monday, January 20, 2014

New Air Pressure Regulator 1/4" w/ Free Gauge

New Air Pressure Regulator 1/4' w/ Free Gauge
  • New 1/4" Air Pressure Regulator 25 CFM mini Series w/ free gauge
  • Free Gauge
  • Arrow Pneumatics
  • 5 - 125 PSI standard

Shipment arrived in two days. I can't even leave feedback until after 6 more days. This regulator and gauge is better then the original Norgren setup that came with my 5HP Campbell Hausfeld compressor. This regulator has two ports for the gauge. One on each side. This allows the user the flexibility to align and install the gauge on either side for the best view. A teflon-coated brass plug is provided to insert into the gauge port not used. A 3/16-inch Allen Wrench is needed to insert the plug. Once installed, this luxury feature prevents the regulator and gauge from interfering with the other controls on the compressor. And this gauge was free. Gauges usually cost as much as the regulator. I installed the regulator horizontal with the gauge facing up and clearly visible next to the tank pressure gauge. The entire unit is far more precise and sensitive than the original. I can adjust hose pressure accurately within a quarter pound. Frankly, I was not expecting this quality and features for $27.00. Simply install the regulator with the air-flow arrow pointing in the right direction. Cover all threads with Teflon tape before installing. I have no leaks and a compressor that functions better than new. This regulator will easily handle 125PSI working pressure. And just for extra safety, I use 200PSI hose. Hose sometimes get worn, crimped or twisted without the user being aware. Go ahead, let off some air.

Buy New Air Pressure Regulator 1/4" w/ Free Gauge Now

This air regulator is one of the best that I've seen and used.

The construction is machined aluminum/heavy plastic, and the supplied guage is of a high quality, graduated in p.s.i. and bar. That being said, here's what sets it apart from the rest: you connect it to your air source and turn the knob to get your desired air pressure. If you turned too far, then you turn the knob 1/4 turn back and the air pressure backs off. You don't have to back it off 10 turns to release the pressure then try again. It is very easy and quick to set the pressure you want, and once the pressure it set, it stays there.

After dealing with what seems to be a sea of junk air regulators, I'd give this one 6 stars if I could. I highly recommend it.

Read Best Reviews of New Air Pressure Regulator 1/4" w/ Free Gauge Here

Just installed this regulator on my portable compressor and it does seem to have reliable ajustment to it. The guage that came with it was made in china but the regulator was made here at least. I would recomend this to anyone that needs a quality regulator for there compressor.

Want New Air Pressure Regulator 1/4" w/ Free Gauge Discount?

I am posting this review in hopes that somebody will comment on it and tell me what's wrong.I honestly don't know if I am doing is something wrong or if this is a bad product. I think it's my fault.I've done extensive research on the web to find the source of this problem.

My Campbell Hausfield air compressor had a slow leak in it last summer. I used soapy water after unplugging it to try to find leaks. I found one but it continued to leak after I used teflon tape on that fitting.

I figured that i had a slow leak that I could not see in my old regulator. I replaced it with this one. First thing I noticed was that the knob comes off too easily. I'll fix that with some glue when i get around to it. The next thing I noticed was when I tried to cut the pressure back in my line air escapes forcefully out of this regulator. If I allow this to happen my compressor wil be coming on and off a lot more than I like. NO AIR ESCAPES when I have it fully open.My old one did not do that. I still think I have done something wrong so I refuse to downgrade this regulator. When i find out either way I will update this review and grade it accordingly.

I did really like the price of this unit and the fact that it came with an extra gauge. It looks to be of good quality material. That's another reason I think the fault is me.

Did I eventually find my leak??? No...I did not..Even with extensive use of soapy water. My compressor also has a habit of throwing a breaker when it comes on. I'm thinking the valve in the fitting that is between the compressor motor and the tank is bad. It's also possible that the air is leaking back in the motor itself. This compressor is only 8 years old and it is not in frequent use. If the leak is in the motor I'll probably sell this unit as a parts only compressor. I'm tired of dealing with it. OH...shutting this regulator completely off does not help. It's still leaking back in the unit itself.

As I said at the start I will really appreciate helpful comments on this problem.

Save 66% Off

The regulator works perfectly for my old compressor. It is very easy and quick to set the pressure you want, and once the pressure it set, it stays there.

Sunday, September 8, 2013

Frigidaire FRA052XT7 5,000-BTU Mini Window Air Conditioner

Frigidaire FRA052XT7 5,000-BTU Mini Window Air Conditioner
  • 5,000 BTU cooling capacity
  • Cools room sizes up to 150 sq. ft.
  • 2-way air direction control
  • Anti-bacterial mesh filter type, side slide-out filter access
  • Rotary controls

I spent quite a bit of time researching A/C before purchasing. We live in Oregon and it doesn't get too hot but there's a month or two in the summer where the heat and humidity get oppressive in the house. I wanted an inexpensive, small, window A/C to increase the comfort. I wanted something small enough that I can store it the other 10 months.

So, after much research I ordered this model. I was going to get the 6K BTU model with the electronic controls but I figured I would get something super cheap and if it didn't work I could use it as a single room cooler. Shipped free which makes this a pretty good deal. Arrived in about a week.

Installation was easy, following the instructions in the manual. I did have to install and remove the A/C about 3 times to get all the sealing right. In the box there's a lot of different thicknesses of foam and foam tape. There is no specific instructions about what to do with this, except the stuff for the top gap of the upper sash. So, I experimented with various combos to get a good seal. We have recent vinyl windows with screens but no storms so the unit basically dropped right in. However, there are some gaps around the bottom in this configuration. I stuffed these with the thickest foam that came with the unit. This did the trick but didn't look too great. Luckly I ordered extra foam tape as another reviewer recommended, and I used small pieces of that to caulk around it inside and outside, leaving the big foam inside. It actually looks pretty neat and professional. $4 well spent ;)

Anyway, the unit is installed in our main living room. We are in a 1940's box bungalow so this room is about half of the width and length of the house. The bedrooms and kitchen connect to it. With it on HI cool/Max(7) the entire house has been very cold and huge amounts of water have been pulled out. We will see how it performs in the upcoming week of 95+ temps. We keep a few $10 box fans around to circulate air so I can move the cold air around.

One thing is that I have heard mentioned on a few other models is that the fan catches water in the pan and spits it around. This is a feature and not a bug ;). The unit is designed to pitch backward slightly when properly mounted. Moisture removed from the room collects at the bottom. The fan blade is coated in rubber and it's designed to suck water up and spray it on the evaporator coils. This facilitates some precooling of the outside air. It drastically increases efficiency. I would not drill drain holes, as other people have mentioned.

Summary:

$100, and my house is cold AND quiet. You can't say much more. If it's not enough for the hottest day I might get one more and move them to the bedrooms. It's very quiet on low but I like white noise.. I hope it lasts, even if it doesn't I'd gladly pay another $100 in 2 years.

Buy Frigidaire FRA052XT7 5,000-BTU Mini Window Air Conditioner Now

I got it hoping it would keep my apartment cool-ER. I expected it to keep it comfortable, not cold. I also had a bit of a problem with size. The only window that opens in my house is a vertical sliding window, which Air Conditioners I can afford, aren't made for.

Once I received it, I started to assemble and install. Originally I was going to leave the extensions off, since my window was only 18 inches wide, but after I got it and thought about it more, I realized they could still help keep it supported. So I put them on. They are about an inch inside the window, to help it from falling out. Also, I originally hoped to buy some wood and put that above it, but once I saw how sturdy it was with just the extensions, I put cardboard above it and plastic taped around the edges with duct tape. Very red neck, I know. It's sealed with the help of some other bits that came with it to help seal it.

I installed it a little over 12 hours ago and my home is cold. I live in a house above a garage. Just a large living room, average bathroom and small bedroom. It's 621 SQ Feet.(assuming I did the math correctly. 23 x 27 feet.) This is total, but there are 3 separate rooms here. (Also, I have a low ceiling, only 6.5 Feet.) I placed it in my only opening window in the living room and it keeps the bathroom cold which is closest, and my bedroom pretty cold too, which is farthest. A lot larger than advertised for. I didn't care, I needed a little cooler than I had. Before, it was hotter inside than it was outside. I have it on high, but will consider turning it down, which I never thought I would do. I like the cold. It's THAT cold.

For $110, I got an amazing air conditioner that perform WAY better than expected/advertised and it got here exceptionally fast too. It arrived 4 days after I ordered it with standard shipping and handling. I am a very happy costumer.

Read Best Reviews of Frigidaire FRA052XT7 5,000-BTU Mini Window Air Conditioner Here

I have run this all summer, purchasing it about five months ago.

It has been a relatively mild summer with only 12 days over 100 degrees.

Pros -

Easy to Install

Excellent Size for Small Windows

Fairly Quite to run (would not bother me if I slept in my office)

Keeps my office 11x14 frigidly cold when set on max (temp 7 of 7)

..(takes about 8 hours to cool down a hot room with the door closed)

..(I keep it on 5 out of 7 on the temp gauge, that even gets a little cold at times)

Cons -

The Directional Air Flow vents are poor

Not much difference between the High Cold/Fan settings and Low Cool/Fan settings

When rain blows against the unit the accordion extensions collect a little water along the bottom

I am considering getting two or three more for my house next summer.

I had one of my Frigidaire window units at the house die this year, it was twelve years old.

**UPDATE**

September 22, 2011

One year later to the date. No this was not planned. This little unit lasted through another summer, and this one was not so mild. I lost count of the days over 100 degrees. I did not buy any more for my house, as I moved into a new home with central air. This unit does however continue to cool my office as it was purchased for.

It was stored all winter in the utility closet off my office (i.e. indoors, warm, and dry). It was washed down with a power washer before being re-installed in the window this year.

Pros -

Excellent Size for Small Windows (I am still amazed I found a unit that fit)

Fairly Quite to run (I don't notice it running anymore, and no customers have complained)

It can still freeze me and my customers out when set on max temp (7)

..(I timed it again and it still takes about 8 hours to cool down a 11x14 hot room)

Cons -

The Directional Airflow vents are very poor (they are basically useless)

Still not much difference between the High and Low settings

..(I fixed the rain issue above by using plexiglass this year)

Rust has started to form on the outside grill and corners where the condensation drops

For those of you wondering, the reduced star is because of the directional airflow issues. Another review mentioned the styrofoam can be seen, and was probably used to fill the gaps. This is true but after two years it still seems to be in good shape. It also appears to be fairly thick. Some other items I tested this year...

Room size 11x14 (left on this setting for 24 hours before temperature was measured)

Average outside temperature during this week of tests was 98 degrees.

Setting Cool/High 7 brought the room to 58 degrees, outside temperature 98

Setting Cool/High 5 brought the room to 63 degrees, outside temperature 96

Setting Cool/High 3 brought the room to 74 degrees, outside temperature 100

Setting Cool/High 1 brought the room to 89 degrees, outside temperature 99

All temperatures were read at 4pm.

**Please note this was my unit's performance. Yours may differ.

Yesterday it was put back in storage until next year. I considered getting a sound level meter or loudness level meter to measure the actual noise my unit puts out, but I have not got around to that yet. Maybe next year.

Want Frigidaire FRA052XT7 5,000-BTU Mini Window Air Conditioner Discount?

If you're like me, when you've been out shopping, say Walmart, Sears, or some of the other places you might have noticed, especially in the hot summer time, these smaller cheaper A/C window units on store shelves. For the most part, they've looked cheap and I've never seriously considered buying one as my standards are a bit higher.

However, here we are, summer 2010, NE Kansas and the temps are rough, especially in my back room. I had to do something.

This is where this little gem fits it.

Spending a bit of time doing some research on getting the right Window A/C unit for my room at a price point I could afford, brought me here. In short, I have to more than agree to everyone's positive review on this item.

This thing screams quality. The boxing / packaging is great. The fit and finish of the unit is perfect. Some very skilled design and workmanship went into this A/C. You could honestly not ask or expect any better. People are saying this thing cools down 2 or 3 rooms with ease. My application will just be one med size bedroom. So far, I have it set to low cool on 3 or 4 and the room is night and day different in terms of comfort.

I paid $126 for this unit off eBay. I was saddened to find it for $100 shipped elsewhere which, they have in stock. Do a google search for "Conn's Frigidaire FRA052XT7" and the product will pop right up for you. It's $89 there with $10 dollars 3 5 day shipping.

For the money, the weight of the unit, the fit and finish, name brand, etc. This is about the best investment I've made in sometime. Hats off to the folks at Frigidaire. I mean really, I just cannot put this fantastic product / experience into the words they deserve.

I wish I had Bill Gates money, the first thing I would do would be to order 500,000 of these units, sit up a Midwest distribution center with offices and coordinate with local and national cities that account for some of the highest heat related deaths and get these cherished older generations who we owe everything to, these people with out means who are dieing of heat and get them this A/C. Box fans do not cut it.

Save 21% Off

I live in a basement apartment and struggled to find an AC for my tiny windows the opening is only 16.5 inches wide and 18 inches tall. No window air conditioner would fit that space. I had an 8,000 BTU portable A/C but that thing was just very inefficient drawing in hot air from the outside as most portable units do because they constantly exhaust hot air and new air has to come from somewhere. Long story short, I stumbled upon this little unit and found out it was only 16 inches wide (sans the side panels). It fit my tiny window perfectly. Most importantly, it also does not protrude very far to the outside, and important consideration when people walk past your window.

Mounting this unit was easy. It is so light that you don't have to struggle with it like most air conditioners. You should not get a hernia lugging this unit. It also puts very little strain on the window frame and does not need any additional brackets. To my surprise, the unit also came with tons of mounting hardware including insulation often not included with other units. There was even a piece of foam to put in between the two window panes to insulate the gap in between two open windows. Nice.

I noticed a lot of people out here mount the unit in an angled position. You do not have to go out of your way to do that. If you mount it right, it angles slightly to the outside by itself. The reason for this is so that the water that accumulates in the unit flows outside and not inside. You don't have to tilt the unit outward as much as many of the pictures on here show.

What the unit lacks in size it does not lack in output. At 5,000 BTU, I was not expecting much, but this unit outperformed the 8,000 BTU portable unit easily, drawing 1/3 less electricity. It cools the entire 400sqft apartment with the help of a fan. (a well-insulated apartment, don't expect it to cool 450sqft in a poorly insulated or sun-exposed building) It is one of the quieter units out there, producing a constant hum rather than sounding like a freight train like some units. The most noise comes from the fan. The compressor is barely noticeable. It is a no frills unit with manual controls but they work pretty well. It maintains the room temperature better than many electronic units. Set to level 6, it cools the room to a comfortable 73 degrees, level 7 cools to about 69 degrees. it cycles on and off nicely and quietly. Finally, the build quality seems rather good nothing rattles or vibrates.

Overall, this is probably the best little AC out there you can get. If space is a problem and you were considering a wasteful portable unit, give this little guy a try.

Friday, July 26, 2013

Grex GCK02 Airbrush Combo Kit with Tritium.TS3 Airbrush, AC1810-A Compressor, Accessories and DVD

Grex GCK02 Airbrush Combo Kit with Tritium.TS3 Airbrush, AC1810-A Compressor, Accessories and DVD
  • Easy-to-use and comfortable Premium Grex Tritium.TS airbrush
  • Stylish, quiet, feature-rich and portable Grex AC1810-A airbrush compressor
  • The G-MAC gives you precise unrestricted airflow control at your fingertips
  • Reservoirs included: 7mL and 15mL gravity cups and side Siphon w/ 30mL bottle
  • 30mL bottle of Private Stock premium grade, water based acrylic airbrush color

High quality, very easy to use, and comes with eveything to get started! Wish the air hose was longer. Other then that, great kit to start airbrushing with.

Save 23% Off

Thursday, July 4, 2013

Tru-Flate 17-351 1/4" Female NPT Direct Air Line Chuck With Shut-off

Tru-Flate 17-351 1/4' Female NPT Direct Air Line Chuck With Shut-off
  • Built in shut off valve
  • 1/4 inch female NPT
  • 150 PSI maximum air line pressure
  • Cannot be used on inflator gauges

haha i cant belive im rating a air chuck but it is what it is and its a air chuck that works and is cheap

Buy Tru-Flate 17-351 1/4" Female NPT Direct Air Line Chuck With Shut-off Now

This air line chuck is much better constructed than the one I am replacing. It does not leak when pressurized, unlike my previous model.

Saturday, June 8, 2013

25g Bench Top Sandblast Sandblaster Cabinet Blast Media

25g Bench Top Sandblast Sandblaster Cabinet Blast MediaI got this cabinet to avoid building my own for small glass sandblasting projects with a small compressor. Cost less than the materials would have and, while I thought the included gun would not be useful with the small compressor, was pleased to find that it worked well enough with the fine grit used to speed projects through.

1st review (after few hours of work) :

I bought this of ebay for 110$ shipped and it's wonderful. It came well packaged and contrary to other reviews mine didn't leak at all. My only problem was that my 5 gallon compressor was dropping pressure way too fast for me to do any kind of sand blast.I hyad to stop every 2 minutes to wait for pressure to built back.

If you are looking into buying one of theses and don't have money for more rugged versions get it!

2nd review (after 2 months of use):

It leaks!!!!! but easily fixable with sealer around the top window and a new bigger foam strip from hardware store for the door. I bought a ch compressor vt6275 witch is more then efficient for this kind of job. and it works great. I tried to blast 13in wheels (5"wide) in there and it was a pain, the cabinet is too shallow and its hard to blast.

I would only recommend this cabinet to anyone that wants to fix it first and use it only for work on small items (brackets, nuts, bolts etc.).

NB: i buy my sandblast media from tractor supply for very cheap (their aluminum black diamond is great.) cheaper than anything here.

Buy 25g Bench Top Sandblast Sandblaster Cabinet Blast Media Now

It is what it is a box. It leaks some but I expect and can live with that feature. The interior light worked for about 30 seconds and went out. I called the vendor and was told they would send another light; they did and it works.

Read Best Reviews of 25g Bench Top Sandblast Sandblaster Cabinet Blast Media Here

This was one of the best investments I've made it a long time! I repair electric motors for my job and 4 out of 5 times the motors are in horrible shape. I've tried everything under the sun to clean the corrosion off and while there are ways, they are not easy and very time consuming. Since the purchase of this little puppy, that is no longer the case; I can do twice as much in 1/4 the time now.

Just remember to clean filters frequently so the cabinet stays clear of dust.

Want 25g Bench Top Sandblast Sandblaster Cabinet Blast Media Discount?

Nice cabinet for the most part, a little bit cheap feeling, the light died after 1 week..But it's still getting the job done.