Showing posts with label air compressors on sale. Show all posts
Showing posts with label air compressors on sale. Show all posts

Monday, March 24, 2014

Grip 50 ft x 3/8 in Industrial Air Hose Reel

Grip 50 ft x 3/8 in Industrial Air Hose Reel
  • All steel construction with brass fittings
  • Fully Automatic Hose Rewind
  • Rated at 300 PSI
  • Adjustable hose stop provides the right amount of hose forthe job every time
  • Heavy duty base and reel mounts to any wall, ceiling, or work bench and holds 50' of 3/8" rubber hose

I installed this unit into my shop raters. Plumbed the air line to it. No leaks all was fine. The internal mechanism to retract the hose also works as expected. So far so good. This air hose is a time saver, and helps keep the shop tidy.

You could pay more, but I do not know if you will get a better model for the price.

Buy Grip 50 ft x 3/8 in Industrial Air Hose Reel Now

Purchased for a ceiling mount in my garage between my vehicles. Plumbed air to it so it can be used without having to drag air hoses around all the time from the compressor.

Well built, hose is firm but pliable. Hopefully will give me many years of service in my garage.

Thursday, January 9, 2014

Campbell Hausfeld MP5143 Pistol Grip Blowgun

Campbell Hausfeld MP5143 Pistol Grip Blowgun
  • Comfortable lightweight design
  • Trigger controls airflow to gun tip
  • Narrow 3-Inch extended nozzle easily fits into confined spaces

I purchased this blowgun for two reasons: (1) to clean air filters for my vehicles, lawn equipment, and pressure washer; and, (2) to periodically remove any dust from my home computer.

The body is made of heavy plastic. It will attach directly to the threaded end of an air hose or you can purchase quick release couplings for this and your other pneumatic implements. I utilize the couplings because I also depend on my air compressor for vehicle tire inflation and other uses. One word of advice: you will need some 1/2" teflon tape for the threads as the couplings do leak a little without teflon tape to seal them. The tape is very inexpensive.

The first thing I used this blowgun for is cleaning air filters. I am impressed. With the concentrated air, I was able to remove the vast majority of trapped dirt and debris from the filters making them look almost new. Replacing filters less frequently will pay for the cost of this item in no time at all.

Because the user can control the air flow, this device does a great job of removing dust from sensitive electronics inside the case of my home PC.

I already have other uses in mind like removing debris trapped in hard to reach places on my lawn tractor, and cleaning grit/dust/debris from my power tools, hedge trimmers, chainsaw, etc.

Buy Campbell Hausfeld MP5143 Pistol Grip Blowgun Now

I always had the cheap metal bodies blow guns, but wanted a pistol grip kind. Despite having a plastic body, there is a Brass threaded insert for the the quick connect fitting. I am impressed how easy it is to squeeze the trigger and control how much air flow comes out, guess I'm used to the cheap harbor freight kinds. I'm ordering another.

Read Best Reviews of Campbell Hausfeld MP5143 Pistol Grip Blowgun Here

This air gun is a good deal. It's very easy to install and use and feels well-built. The entire gun is about 10" long, the metal pipe is 3.5" long and the handle is about 4" long. It's made tough plastic. I clamped a vise grip on it to help install the hose adapter and the body didn't bend or flux.

Want Campbell Hausfeld MP5143 Pistol Grip Blowgun Discount?

Had a sturdy tip and definitely blows hard! The plastic ring around the edge is good for hanging to tool up (better than hanging from the handle).

Will require a 1/4" male connector and a little bit of teflon tape if you don't already have those.

Seems a little large compared to the nozzle-type blowguns, but after a little use, it definitely seems easier to aim and use. Also, feels durable.

Save 53% Off

I was skeptical at first when I saw how affordable this was as opposed to "name" brands that easily cost 10 times as much. It works fine and I really can control the air volume with little effort easing up on hand fatigue. Good for clearing out channels in carbs and other small and delicate objects that you don't want to "blow away!"

Monday, December 9, 2013

CoolBot Walk-In Cooler Controller for window air conditioner

CoolBot Walk-In Cooler Controller for window air conditioner
  • Allows a standard window-air conditioner to cool a room to 35 degrees F
  • Make your own Walk-In Cooler for Farmers, Florists, Hunters, Restaurants, Convenience Stores, Home Brewers and Mortuaries
  • Two-minute installation!No warranty-voiding modifications to your Air Conditioner
  • Guaranteed to work (Extended free trial period)
  • Thousands sold since 2006! Recommended by major university extension programs.

Like Most intelligent farmers necessity and budget are always in play. The need for a commercially available refrigeration unit is part of all farms cool down and storage requirements, yet the availability of affordable

equipment to small farms does not exist, unless it is taken back to the purest form of design and function.

What Ron has done here is recognized that the limits imposed by residential A/C unit manufactures, specifically the

restriction of low temperatures by thermostatic control, can be manipulated. In designing the Cool-Bot he did several things;

1. energy conservation, large commercial units are power hogs,typically three phase 400-600 amps, and they are an antiquated, inefficient method of cooling, specifically taking copious volumes of cold air and moving it into a space that is usually poorly designed and has huge air leaks, the net result is waste, both in terms of energy, and product stored as air mass on leafy greens desiccates and wilts foliage, so unless your stored product is potatoes, you want coiling without excessive moisture robbing air mass. Cool-Bot delivers through your Energy Star unit, cold air without damaging the crop, and saves big money in energy costs, and efficiency.

2. Back up, when your space requires multiple units to achieve the desired level of cooling needed, you simply run more window units, again the often overlooked benefit here is the built in back up. If your commercial unit goes down, your product temps go up and spoil. The repair cost is high, and you still have one unit. With multiple Cool-Bots, you have an emergency back up in place, if a unit went down, the others can maintain temps for that period while you replaced that A/C unit, and since it has not been modified whatsoever, it is under a factory warranty. Now you have continued cooling during the repair or change out, something not offered by commercial refrigeration, with them your down, and your out.

3. Seasonal change. During cooler periods of the year with a multiple unit cooler you have the option of shutting down several of the A/C units for additional energy savings, with the big units, its on or off. So it is time to ask yourself, who brings the best things to life? not just those guys, but us farmers, we feed you, and increase your health with safe local foods, and design and build products that are frugal, and efficient. The highest praise a farmer or designer can receive is from his peers, and I highly recommend Cool-Bot to anyone, for a multitude of purposes. It is the only intelligent choice for efficient energy conscious cooling, and the only choice for 3 Boys Farm, a 365, 24/7 large grower of hydroponic and organic produce. Way to go Ron!

Buy CoolBot Walk-In Cooler Controller for window air conditioner Now

Robert@ Three Boys Farms gives a good overview on the Coolbot. I use the coolbot in my coolroom to keep grapes around 39 degrees F. before I crush. What I have to offer in terms of a review is a demystification of the product for any potential user that would like to know exactly how it works. To begin, it doesn't 'turbo-charge' your air-conditioner. This is largely hyperbole. There is definitely no magic involved.

The Coolbot consists of three probes, a thermometer, a temperature probe, and a heater probe all leading back into a single well sealed package. Here is how it works. After removing the grill from the AC unit you will locate the thermostatic sensor which is affixed to the cooling fins of the AC unit. This temperature sensor is naturally responsible for cycling the AC unit on and off. You will now take the AC's temperature probe and place it in contact with (secure beside) the Coolbot heater probe. The second probe on the Coolbot is a temperature sensor which is placed in the fins of the AC unit approximately where you removed the AC temp. probe.

The heater probe on the Coolbot is in direct contact with the AC's thermostat. The Coolbot heater probe simply heats up the AC's thermostat thereby causing the AC unit to sense a warmer temperature than what actually exists in the cool room. The second probe of the coolbot monitors the temperature of the AC fins so that the Unit doesn't ice up. Ron has taken an extremely simple concept, one that isn't wholly original and created an excellent, dependable, durable and vastly overpriced product that will do exactly what it warrants. I am very pleased with its performance.

Read Best Reviews of CoolBot Walk-In Cooler Controller for window air conditioner Here

I have had a Coolbot in place about a month now. I am extremely pleased with its performance...It keeps my 6'X 9' walk in cooler at an average temperature of 38 F. Great product and a great savings (about 1/6th the cost) over installing a 2 part commercial refridgeration unit

Thanks Ron...nice unit...keep up the good work.

RBK

Want CoolBot Walk-In Cooler Controller for window air conditioner Discount?

We purchased the Coolbot controller in July 2012. Have been very satisfied with it so far. We have been using it with a LG 15000 BTU air conditioner, in a 18'x7' cool room. We use it at 47°f, for flowers. We had been getting estimates for having standard refrigeration installed. The estimates started at $3000.00+ for a used system. I purchased the Coolbot controller and a new LG air conditioner for under $800.00. It was worth every penny. You save not only in equipment costs and installation costs, but also on your electricity bill. Just follow the Coolbot instructions about installation, and insulation, and you cannot go wrong.

Save 3% Off

CoolBot works great

Built an 8x8 building using a 1200 btu and CoolBot, Hung a beef for two weeks, Temps out side were from 20* to 60 *

The room stayed at 37*. for the whole 2 weeks.