Heavy Duty 2 Ton Hydraulic Strut Coil Spring Compressor

• The professional's choice for compressing difficult coil springs
• Heavy-duty; All steel construction
• Coils attach easily to bracket
• Foot Operated hydraulic compression with quick release
• Max capacity is 2-tons

pretty nice machine to help with the struts but it said or it says "2Ton".........before i opened and took it out from the box it already said its only a 1Ton...BIG disappointment!! but i figure the price was ok for it and hey it got the job done so i guess im keeping it....

Buy Heavy Duty 2 Ton Hydraulic Strut Coil Spring Compressor Now

Great item for the price. Placed this unit in our shop and it worked great for a couple of months. Not really an issue for us since we can repair and fabricate. The jack portion gave out on us after the 2nd month but easy enough to rebuild. Other than securing the base, the unit was solid.

Stanley Bostitch CPACK3 Finish Nailer, Brad Nailer, Finish Stapler, and Compressor Combo Kit

• Combination pneumatic tool kit with finish nailer, finish stapler, brad nailer, and air compressor
• Power fasteners are lightweight and rugged; air compressor has a high-efficiency 2 hp (peak) motor
• Nailers and stapler feature durable aluminum housing; air compressor has 6-gallon tank and oil-free pump
• Includes all fittings and hoses, 3,000 staples and nails, tool lubricant, and tool bag
• Power fasteners are covered by a 7-year limited warranty; air compressor comes with a 1-year limited warranty; when shipped, this combo kit weighs 62.2 pounds

This unit has turned out to be an exceptional value. All the nailers work great and the compressor of course has other uses around the shop. After completing my first project using the unit my only regret is that I didn't spring for it years ago. It makes far more difference in speed and quality of assembly than I had imagined.

Buy Stanley Bostitch CPACK3 Finish Nailer, Brad Nailer, Finish Stapler, and Compressor Combo Kit Now

I purchased the Bostitch CPACK 3 (compressor and 3 air tools). The price was excellent and I was excited to try out the unit. Packaging was very good, and showed no damage. I pulled the compressor out, and the plastic motor housing case was cracked 9 inches on the side and loose. The motor's belt was exposed behind this, but I was going to overlook this, because I don't have small children who would stick their fingers in there. I powered up the compressor, and tried all 3 guns. I was pleased with the quality of all 3 guns. Once the compressor didn't turn off, I turned it off with the power switch. That's when I heard & felt the leak between the regulator valve and the tank. After taking a quick look, I realized this was an obvious manufacturing defect that should of been noticed during a (hopefully) quality control test at the plant. This is when I decided I needed to return the product. I packed it back up, and after checking out the cardboard box, I decided that the compressor was cracked before it was even boxed. It was well packaged, and the crack seemed to be because the unit itself was dropped on its side before it was ever packaged. 3 stars because the compressor seemed of decent quality, and the guns did shoot evenly, and accurately. A non-defective unit would of earned 4.5 stars.

Read Best Reviews of Stanley Bostitch CPACK3 Finish Nailer, Brad Nailer, Finish Stapler, and Compressor Combo Kit Here

Used it to install window moldings and tack down some carpeting. Worked flawlessly. Love the package, and price can't be beat. Only complained is that the compressor is on the noisy side, but other than that, I would recommend this product highly.

Want Stanley Bostitch CPACK3 Finish Nailer, Brad Nailer, Finish Stapler, and Compressor Combo Kit Discount?

i bought this combo as a back-up compressor but it's going to the front line...

the combo arrived promptly without damage and the compressor and guns functioned perfectly right out of the box.the finish gun punched through 3/4 oak,3/4 ply and into the joist for its first test.all the stuff that comes with this combo(and the warranty for the tools)adds up to a very good value.i've (ab)used bostitch tools for years every day on the job for years and expect life will be no better for this combo;)

I am a weekend do-it-yourselfer. One project that I was working on needed plenty of trim work. After talking with some knowledgable friends and reserching on amazon I decided to purchase the Bostitch CPACK3 combo kit. For a 3 gun kit I thought the price was right and I saw the same kit at Lowes for the same price but I would have had to pay sales tax. Although I have only used the finish nailer, I did test the other 2 guns and they work fine. The finish nailer works great. I have gone through about 1500 nails and have not had one jam. The gun fits comfortably in my hand and is light weight. At start up the compressor is a little noisy but after about 3 minutes it kicks off and only occasionally kicks back on. Being a first time user of a finish nailer I am very happy with the purchase and have saved myself a lot of time.

Grip-Rite GR254CTS 2HP 4 Gallon Twin Stack Compressor

• Oil-splash lubricated
• 3450 RPM
• Compact twin tank stack design
• Industrial grade motor with ball bearings for greater durability
• Heavy duty pump with cast iron cylinder

I have had this compressor for over a year now. It has done everything I have asked it to do. It is a bit loud. Always fires up. Have not had any problems with it. I use it for automotive tools. Air guns, die grinders etc. Easy to move and carry around. Has oil in the motor for prolonged life. A good quality product for the price.

Buy Grip-Rite GR254CTS 2HP 4 Gallon Twin Stack Compressor Now

This compressor is LOUD. It also had an air leak at the weld on the tanks, which leads to beleive that it was shoddy manufacturing. I sent it right back and purchaced the Hatachi EC119SA. This compressor is quieter and feels and sounds solid. It is a little heavier,but compared to the alternative I would gladly choose the Hitachi hands down. I am in construction and so far it is working fantastic.

Amcor AF8000E 8,000-BTU Portable Air Conditioner

I can't say I've had as good an experience as others reported here...the main problem I've discovered is that the compressor only cycles on for about seven minutes at a time, followed by fifteen minutes during which the machine simply operates as a fan and blows in hot air from outside. Company info on their web site indicates that this is being done to prevent the compressor from overheating--unfortunately, this results in the compressor remaining cool while my small studio apartment (only 200 sq feet) remains too hot. I don't know if other units have similar limitations, but I would hesitate to recommend this product on the basis of my own experience. Hope this is helpful to anyone looking to make a buying decision...

Overall I am very satisfied with this portable air conditioner.

The Good:

-Shipping was extremely fast (2 days for standard shipping).

-Installation was a breeze.

-The air that comes out is actually cold, and powerful. The fan produces a terrific draft of cool air.

-It cools the room quickly.

-The evaporative draining system is great... no emptying buckets of water constantly!

The Bad:

-It does make some noise (no more than a normal window air conditioner would). But I would say the relief from a hot, humid day is well worth the buzzing noise.

-The exhaust hose was larger than I expected. Which means if you don't place the air conditioner strategically, it can be a huge eye sore in the room.

However, it does do its job well and I would recommend this unit to anyone needing to cool a room/dorm/small apartment. Enjoy!

Buy Amcor AF8000E 8,000-BTU Portable Air Conditioner Now

I purchased this unit out of desperation in the midst of a heat-wave. I read a lot of reviews and settled on this guy, and I'm not disappointed. My living room isn't huge (approx. 12'x16'), but it cools it down effectively.

The Pros:

My girlfriend loves the remote. You can change the mode, target temperature, fan speed, and turn it on and off without moving off the couch.

I like that it shows you the temperature. I also like that it automatically kicks the compressor on and off as needed.

No buckets to empty.

The Cons:

When the other reviews talk about the exhaust tube being big, they're lying. It's FREAKIN' HUGE. Think dryer hose.

There's no way (that I've found, at least) to set it to turn off when it hits the target temperature. I still panic over high energy bills, so it's scary to leave it running all the time. I'd like it a lot more if it would not only kill the compressor, but shut down the whole unit when the room becomes cool enough.

It's fairly noisy. I don't have a lot of experience with air conditioners, but it's louder than the few units I've been around before. It's not terrible, though, so this is only a half-con. More of a concern, I guess.

It's not an Energy Star appliance. That was my biggest hesitation point before I ultimately bought this unit.

Overall, I'm pretty happy with my purchase. I might come back and change my tune after I've seen a couple months of energy bills, but last month's only went up marginally. I'll keep my fingers crossed.

Read Best Reviews of Amcor AF8000E 8,000-BTU Portable Air Conditioner Here

Much better than my old window units. Because of the portability you can make the most of the 8000 BTUs by directing the air at the right location and level. I also live in the Northeast so there are many days I can just roll it into a closet until the next heat wave. No ugly window unit just sitting there all summer. You may have to cut a piece of plastic if you want a custom window fit but I simply make up the gap of several inches with a small white rag that blends right in -easy to move to windows of different sizes. Highly recommend this Amcor model!!! Be careful if you select other units as this is a newer technology at these price points so a brand name may not mean much. I never heard of Amcor but the great reviews on this unit swayed me and it has been rock solid. No water to drain. I suspect as you go to higher BTUs with any brand you run the risk of it being more unreliable.

Want Amcor AF8000E 8,000-BTU Portable Air Conditioner Discount?

This unit has been a life saver as I live in a very old home with no central air and only one bedroom window that I hated to block out the light with a regular window unit. The attaching of the hose and window kit was so simple. I put it together after working a twelve hour shift and went to bed for a good night's sleep, finally. I like the way I can roll it into a closet when cooler days are here although the unit is not huge or ugly. The casters were a good idea as well as the nano-mist dispersion of condensation water. One reviewer spoke of it's noisiness. True it is louder than my quiet fan, but since the sound is relatively consistant, I find it helpful to lull me to sleep as I work nights alot and the daily neighborhood noises (traffic, playing children, construction, and lawn mowers) have been a problem in the past. I priced many similar units in stores and on line. This one is priced affordably, looks good and does the job. Get it.

Stanley Bostitch SB-2IN1 2-In-1 Narrow Crown Stapler/18-gauge Brad Nailer

• 5/8- to 1-5/8 18-gauge brad nailer and 1/2- to 1-1/2-inch 18 crown staple combo tool
• Adjustable depth dial; tool-free directional exhaust; 135-inch-pounds driving power
• Nail lock-out feature eliminates dry firing; magazine holds 100 nails
• Includes 1/4-inch air fitting, 1,000 1 5/8-inch nails, 1,000 1-inch staples, carrying case hex wrench extra no-mar tip and oil
• Measures 9-1/4-inches (length); weighs just 2.6-pounds; 7-year warranty

I bought the Stanley SB2IN1 in early January because it could shoot both brads down to 5/8" and staple, giving me more versatility in my shop. Hindsight being 20/20, I wish I would have spent the extra money up front for a good stapler and a good brad nailer. The cylinder wouldn't seal when you hooked it up to an air hose, and I would have to continually hook it up/disconnect it until it would finally seal. The other problem, and it might be related, is that even when I put the compressor at the max pressure (100psi) it wouldn't countersink staples even in 1/2" plywood. The last problem is that if you could get it to countersink a brad, the footprint is the size of a staple. Leaving an ugly mark on your project. I returned the tool and am ordering a separate stapler and brad nailer.

Buy Stanley Bostitch SB-2IN1 2-In-1 Narrow Crown Stapler/18-gauge Brad Nailer Now

I strongly agree with reviewer,Jonathan Ness about this product. I purchased the Stanley SB2IN1 because it could shoot both brads and staples, giving me the versatility and saving me the cost of two tools. When I put the compressor at max pressure (100PSI) it wouldn't countersink nails or staples even in pine. If you could get it to countersink a brad, the footprint is the size of a staple. Leaving an ugly mark on your project that require additional finishing. I contacted Stanley Bostitch and they told me that they knew of this problem and to get it to countresink, increase the pressure to 120 PSI (however I think the seals will wear out much faster).This is fine for staples but still leaves the ugly mark when using brads.They also told me that this is the problem with a combination tool. If I could return this tool I would...I will use this tool for stapling only and purchase a Porter Cable Brad Nailer, also the brads are much easier to find for the Porter Cable than the Stanley Bostitch....

Read Best Reviews of Stanley Bostitch SB-2IN1 2-In-1 Narrow Crown Stapler/18-gauge Brad Nailer Here

I bought this 2-in-1 for convenience (it's a 2-in1!) and because of a very good past history with other Stanley-Bostitch tools. I was sorely disappointed. I tried to use this to staple 1/4" underlayment, but encountered numerous jams, misfeeds and situations where one of the two legs of the stapler would not sink. All-in-all, of the 200 staples I tried to sink, I had 30+ 'mis-fires'; or ~16%. I tried varrying the pressure between 80-110 psig (even though the tool is clearly marked do not exceed 100 psig) but the problem never got better. Every 5th or 6th staple would be a problem. Clearly, this is not good. I was left with no other option but to return it (and used my neighbor's Porter Cable to finish the job). I've never had a problem with my brad-only tool Bostitch, so either I got a bad one or this is a bad design. I can't recommend this item.

Want Stanley Bostitch SB-2IN1 2-In-1 Narrow Crown Stapler/18-gauge Brad Nailer Discount?

I have had the Bostitch 2 in 1 nailer for about three weeks. It seems to be holding up well like most Bostitch tools. The only thing that I would like to change with the nailer is to have the trigger be a contact trigger instead of the sequence trigger. It is a good nailer for the money it costsI would highly recommend this nailer.

Save 48% Off

This is a lightweight nailer/stapler that can handle narrow staples and light gauge brads of up to 2 inches.

I have not used this tool much but about a third of my time so far has been spent fixing jams and the loading assembly. The loading magazine spring popped out, the magazine does not secure positively and it jams from time to time.

This is the worst Stanley branded tool I own. Looking for a replacement.

Legacy A73458D Color Connex Type D 14 Piece. 1/4 in. Red Coupler and Plug Kit

• Industrial type D connectors in all red colors
• Allows matching of couplers for dedicated hose applications.
• Push connect easy connect system
• Female and Male couplers are the same color

Have a shop on our farm and constantly using air tools. Was using the cheap chinese connectors but decided to spend a little more money and get some quality ones. Cant go wrong with these. You always know what type you have by looking at the color of them. I bought two packs and changed all my tools over to them. NOTHING leaks air anymore.....

Buy Legacy A73458D Color Connex Type D 14 Piece. 1/4 in. Red Coupler and Plug Kit Now

I've been using the cheap brass couplers (with the rubber o-ring) and fittings for several years and I always found myself fighting with the air tools to get them to connect to the coupler and also had problems with it leaking around the o-ring. It got to the point where I had to lay the air tool down on the ground and had to put my weight on it in order for it to latch into place.

I installed these as soon as they arrived and all I can say is I'm very impressed with quality. There are 4 ball bearings that secure the fitting into the coupler (inside the collar) which makes connecting/disconnecting the air tool a quick and painless process. Also, there are no o-rings you need to worry about tearing and leaking.

I would have given this 5 stars but one of the female couplers was defective which didn't allow the fittings to seat correctly. Amazon offered to send me a replacement kit if I returned it, but I installed all the fittings already so it would be too much of a hassle to replace just the one piece. Overall, it was still worth the purchase.

Read Best Reviews of Legacy A73458D Color Connex Type D 14 Piece. 1/4 in. Red Coupler and Plug Kit Here

We had bought several 14 pc sets and use these in an industrial environment and switch out air tools several times a day on an air line. After about a month we noticed that they started leaking air due to wear on the male coupling. After looking at them they are made of aluminum instead of the steel. They would probably good for the hobby guy that doesnt use air that much, but if you swap out tools on your airline often expect them to wear fast and start leaking air. I We won't be buying them again.

Want Legacy A73458D Color Connex Type D 14 Piece. 1/4 in. Red Coupler and Plug Kit Discount?

I thought I would try this product based on the reviews. So far, the one female coupler end has worked ok when it is plugged in, however, it is leaking when it does not have a male coupler plugged into it. I have not tried all of the fittings in the pack yet...

Save 8% Off

I work with electronics and basic construction projects daily. I have wanted a compressor for years and finally made the jump into buying one. I bought a Husky branded 8-gallon compressor. The unit was affordable and of decent quality. I went with an oil-driven compressor to save on noise pollution.

After building my compressor and breaking it in, I needed to put a few things together. I got some teflon tape, a 50' Craftsman air hose that I got on a deal, and I ordered these fittings. I wanted fittings that were of good quality, and I also wanted my materials to look nice (the compressor is red, the hose is red, these connectors are red).

In terms of pricing, they are fairly expensive. I spend 25% of what I paid for the compressor just to buy these fittings. They're necessary for everything you use, though, so I dove in and bought them.

If you're debating getting this set or the smaller 7pc set, don't hesitate. Buy the 14pc set. In addition to constructing the air hose mentioned above, I needed more connectors for the tools I bought at Harbor Freight (they don't come pre-made). Overall, I have used almost every piece that I bought just to get my basic tool collection ready for use.

Have metric wrenches ready when building your air tools/hoses!

- Quincy Compressor Reciprocating Air Compressor - 5 HP, 230 Volt Single Phase, 80-Gallon Vertical T

• Industrial-duty US-made Baldor motor
• Capacitor start motor with built-in thermal overload
• Less than 5 PPM oil carry-over (blow-by) rating
• 145-175 working PSI
• Pump RPM: 942

From the time the compressor cycles on until the 80 gallon tank is once again fully charged, about one minute passes; at this rate it is going to take quite some time before replacing the break-in oil at the 100 hour mark. The compressor runs at a fairly low RPM and is thus moderately quiet and does not have that annoying sound most cheap compressors produce; in fact, it's kind of a nice rumble. Vibration is minimal, really minimal. Compressors of this type are not rated for a 100% duty cycle i.e. they are not designed to run continuously with no cycling on & off; however, we used it stripping paint at 150 psi for the better part of a day with a large external fan aiding the cooling and only tripped the motor reset once but it did have a few times to catch up while we moved ladders. This is a workhorse of a compressor. Because it is very heavy I mounted it on an industrial equipment dolly which allows for somewhat mobile use around the shop; as mobile as 700 pounds can be. The scfm rating is very high for a 5hp compressor; I don't think there are too many 5hp compressors that can match or exceed it. Champion compressors are another quality American line but I prefer the heavy build quality of the Quincy line of compressors. BTW, Quincy builds another 5hp compressor that is rated at 200psi continuous duty and 500psi intermittent duty but it is very costly and grossly overkill for most commercial/light industrial applications. Mine came with a single belt although the pulleys have another v-groove for twin belt drive from the HD Baldor motor. The compressor was manufactured in Quincy Illinois and has a 50,000 hour service life according to the manual. I installed resettable and non-resettable hour meters to insure maintenance intervals are met but at 58 years of age I'll probably never see the day it finally wears out. I purchased this product before I began buying tools and equipment through Amazon and had to pay an additional amount to have it moved from the store to my shop; therefore, I wouldn't hesitate to order it online and have motor freight deliver it. No set up is required other than hooking up the power cord; it even comes with break-in oil. Remember, buy quality and cry once; you'll get over the price soon enough and be better off for it.

Stanley Bostitch CPACK300 3-Tool and Compressor Combo Kit

• CAP2000P-OF oil free air compressor: 2.8 CFM at 90 PSI with 150 max, 6-gallon reserve tank, impact-resistant shroud to protect gauges
• SB-1850BN Brad nailer: adjustable depth guide, tool-free adjustable exhaust and no mar tip; drives 18-gauge brads 5/8-inch to 2 inches in length
• SB-150SX finish stapler featuring bottom-load magazine, tool-free adjustable exhaust and no mar tip; drives 18-gauge 7/32-inch narrow crown finish staples
• SB-1664FN finish nailer features quick-release nose door, adjustable depth guide, tool-free adjustable exhaust and no mar tip; drives 16-gauge straight finish nails
• Accessories include: 1/4-inch by 40-feet PVC air hose with fittings; 1,000 1-1/4-inch brads; 1,000 1-Inch staples; 1,000 finish nails, tool lubricant and canvas carrying case

I would prefer to give this product 4.5 stars instead of 5

The CPACK300 has been great for my recent remodelling jobs. Compared to the cp3, the kit remains the same except for the change in compressor. From my experience with both kits, the CPack300 has a far more ergonomic & jobsite friendly design. As other have pointed out for the CP3, the compressor handle was poorly designed & weight and size has been reduced to produce the cpack300 compressor. It's a tad more powerful at 40 psi & so much easier to lug around. Guages are protected by a rubber rims & the compressor is as compact as can be, the design is queter than the previous design & queter that similar porter cable designs.(it'll still wake you up in the middle of the night if you keep it plugged in next to you )

All guns require a bit of oil, but work flawlessly. Bostich makes great products made for a lifetime & i'm sure this is no different. The guns have never jammed, and work fine with 3rd party nails, or brads... after about 2000 nails, i have yet to have a jam. The design is great, the guns fire comparatively quiet & have the dual safety feature.

The no mar tips are of hard plastic & in my opinion inferrior to the porter cable guns i've used prior to purchasing this combo. I do appreciate the comprenhsive kit that is included. basically you get a quality stanley tool bag, about $25 worth of nails, staples, and brads.

The only deduction i'd give is to the cheap pvc air hose included, i guess this is true with all pvc produces... it maintains its rigitity & it maye be tough going around corners, causing the user to tug it along. Also it doesn't wind as well as rubber hoses, I'm sure i'll be upgrading the hose once it shows its age.

The whole kit is probably 50 lbs total & take a very small footprint when organize.

So far the whole kit is fantastic for the price i paid, about $270 after taxes. It's on par with more expensive kits & it give you alot for the money, including an impressive 7 yr warranty on the guns.

I've laid down about 1500 square ft of hardwood between this bostich & a porter cable combo that i borrowed off a friend. nailed in 150 ft of molding & fixed all sort of problems through out my home. I'd recommend this kit to anyone over the CP3 kit for anyone looking for a dependable nailer/compressor combo. CP3 kit has the inferior compressor

Buy Stanley Bostitch CPACK300 3-Tool and Compressor Combo Kit Now

I've been an owner of this combo for three years now. I bought it from Lowes for some light duty around the house fix ups. Tasks like pump car tires, patching up little pieces here and there. I did use it to built a window seat last year. The unit at first looked solid. The 3 tools that came with the combo is also well built. Boy, when it worked, I love the feeling of pulling the trigger rather than pounding nails all day long. I took very good care of this tool. Always clean it up and drop the pressure to about 20psi before storing it away after each use. And I never left it outside or left it fully pressurized overnight.

Last week I started a new project to install some stair treads. Took it out the garage and adjusted the pressure to 90psi for the brad nailer. The tool worked for a few shots, then suddenly, the nailer just went silent. Checked the pressure, and found that the tank pressure is still at 140 psi, but the outlet pressure just went to zero. I checked the compressor, and found that the pressure regulator knob has stripped. Apparently the threading on the knob is made of plastic. So even with very light usage, a failure on this part is bound to happen.

Then last weekend, I went to both Lowes and HD in my area shopping for another compressor in order to finish my project. Out of curiosity, I checked the Bostitch combos that was on display. Out of the two displays Lowes had, both had stipped pressure knob.

So to the potential buyers out there, beware of this flawed tool. A $300 compressor that uses a cheap plastic pressure regulator that's guaranteed to strip. So do your homework before you buy. Go to Lowes or Homedepot, and check out the floor displays that they have. Chances are, you will see that the plastic knob (the red knob in the front) on the floor model are all stipped, just from people looking at it and turning it a few times.

Read Best Reviews of Stanley Bostitch CPACK300 3-Tool and Compressor Combo Kit Here

I must say, conceptually, this kit is pretty handy to have around the house for the average DIY enthusiast. However, I've not had much luck with the compressor being there for me when I need it. In summary, this is mostly because of cheap parts and craftsmanship, which I shall elaborate on. Bottom line, would I buy again...absolutely not.

My opinions and observations:

1. Nailers: decent. I have cracked one of the end-caps where the air nipple screws in as they are made from cheap pot metal. No biggie, no surprise there, and probably my fault. I bought a new part online and replaced the defective part. My opinion is that the 3 nailers are the strong link in this chain.

2. Hose and accessories: worthless. Again, worthless. Do your self a favor and buy a quality hose. This one is cheap, stiff, and leaky.

3. Compressor: Eeesh...where do I start? Number one, this little sucker is LOUD. I've owned other compressors and wow. Buy some earplugs. After a year or so of VERY light use, I noticed leaking air from the quick disconnect. Then, the plastic knob on the regulator stripped, rendering the unit useless. It was all downhill from there. I purchased a new regulator, disassembled the compressor and replaced the valve (no easy walk in the park). Then I noticed the main pressure gauge is totally gone (as in broke). Then I started to notice the compressor wouldn't hold pressure, loosing 10lbs per 1-2 minutes. Found the culprit! The cheap brass tank coupling going into the regulator. Off comes the shroud again to fix it. Tried tightening, which slowed the leak, but it's simply not a good design. Thought about replacing, but honestly I don't want to invest any more money in repairs. I'll suck it up and live with it. Second time I had the shroud removed, I took note that the motor electrical feed is zip-tied in place at the very very cheap and loose quick connect plug. WOW! The internals look like a second grade science fair project. Don't expect quality here.

I LOVE the semi-portability of this compressor, and the nailers included in the kit are decent. But the cheaply made, low quality design of the compressor is definitely the Achilles Heel of this kit. Don't expect to pass it down as an heirloom. I'm just grateful that my income doesn't rely on this tool. Again, I've had all of these problems under VERY light use, i.e. inflating car tires, blowing up pool toys for the kids, occasional fastening jobs, etc. Of course, your milage may vary.

Want Stanley Bostitch CPACK300 3-Tool and Compressor Combo Kit Discount?

I bought this compressor combo at Lowe's 3 weeks ago. Went home to play with it and discovered the stapler didn't work. Took it back to lowe's and they replaced it. Used it today for the first real project and the cheap plastic pressure controller stripped out and failed. The part cost me $14 and the shipping is $16! LOL!!!

Save 22% Off

I purchased this combo pack after reading every review on Amazon and several other sites for this package and several others. I could not be happier with my purchase!! I needed a kit to aid in the renovation of my new (to me) home. So far I have used the finish and brad nailers to install base board, shoe, and door casing, install a solid pine pre-hung door, and build a couple planters for my wife. These tools are definitely up for many jobs around the house. The finish nailer is plenty powerful and always buries the nail. The brad nailer needed a little adjusting to get the nails to fully seat themselves below the surface of the wood, but it is now functioning great as well. I haven't used the stapler yet, but I'm sure it'll work just like the others. The compressor is a little loud, but I expected that based on other reviews. Once pressurized it will sink brads for a long time and will probably bury 20-30 finish nails before it needs to pressurize again. Don't pass up this combo kit, it will meet your expectations!

Ingersoll Rand R37341-600-VS 250 PSI MAX 1/2-Inch Regulator, Black

• 1/2-Inch NPT
• 0-140 PSI Pressure Range
• Flush-mount gauge
• Relieving - standard knob control
• 210 CFM

I have a 175 PSI 7.5 HP 80 Gallon 1PH Horizontal 2 Stage Stationary Air Compressor in the garage I have behind my home. Of course, with a compressor of this size, I wanted to keep flow levels high at each air outlet in the plumbed air line that is mounted in the garage walls. The Ingersoll Rand R37341-600-VS 250 PSI MAX 1/2-Inch Regulator, Black is what I chose to regulate pressures on my hoses using various air tools requiring differing pressures.

Looking at the design, I determined this model does not rely on a true rubber diaphragm to control pressures it uses a nitril and nylon diaphragm that should be good for at least three to five years. A true rubber diaphragm would also mean the regulator adjustment should be zeroed after use with all pressure shut off and removed from my lines. Compressor air line sludge is also detrimental to true rubber. For these reasons, I wanted mechanical regulators that I could just set and leave rubber diaphragms also allow for eventual pressure "creep" as they age (unnoticed higher pressure requiring adjustment down), and true rubber deteriorates over less time before needing replacement. Beyond all of this, Ingersoll Rand offers a service kit for these ARO regulators.

Using the IR model R37341-600-VS, I can leave my air lines pressurized 24/7 with less worry concerning reliability. This IR model also includes the gauge eliminating the need for my having to supply a separate one. I can just quickly pull the adjustment knob down, rotate it for the proper pressure using the gauge, push it back up to lock the setting, connect a hose, and begin using whatever tool I have set it for. Since I also use Air Chief Industrial 1/2" fittings and quick connects with larger hose sizes, and correctly sized hose whips on my tools, my flow stays high enough with this regulator to run even higher flow CFM equipment like my sandblaster, 3/4 impact, and my automotive body paint and repair tools.

Even though the physical size of this regulator is small, and it has an aluminum body, it does have some "heft" to it at about 1 1/4 lbs. There is also grooved rectangular, and "lipped", flange at the inlet and outlet ports that looks just right for adding a metal support if needed the Ingersoll Rand aluminum 104401 "T" bracket. The bottom of the regulator also has a threaded section just above the adjustment knob and comes with a panel nut for the Ingersoll Rand steel 104405 "L" bracket. Since my plumbing already offered healthy support at the outlets, no brackets were needed but some may need to add a bracket. I actually believe the flange support was designed in because this appears to be the same regulator housing assembly used on the Ingersoll Rand P39344-600-VS 1/2-Inch Filter-Regulator Piggyback, Black, and on the Ingersoll Rand C38341-600-VS 1/2-Inch Filter-Regulator-Lubricator Combination, Black/Gray.

Of course, it also doesn't hurt that this regulator has a nice black powder coat finish and the gauge is easily read with its contrasting color indications. It's a nice clean look against my garage walls. As I have an air drying system with auto drains in place just after the compressor (and before my plumbed lines), I didn't need any added filters but, if you do, I would suggest the Ingersoll Rand P39344-600-VS 1/2-Inch Filter-Regulator Piggyback, Black although it does have a manual drain. If you also want an oil mist model, the Ingersoll Rand C38341-600-VS 1/2-Inch Filter-Regulator-Lubricator Combination, Black/Gray may be what you want. Personally, I avoid oil mist types as the oil gets distributed through the hoses and degrades any rubber hose, not to mention making any oil contaminated hose permanently unsuitable for painting use.

Instructions:

(chuckle) Well, there are none included in the package but I will provide you with some concerning the nice included features of the gauge...

The gauge cover is a polycarbonate nylon piece that unscrews with a standard left-hand twist. Once you remove it, you can access the two quick reference bright yellow pointers on the gauge dial which also narrow or expand the green range field all depending on where you want them set. So, if the cover was loose you might only need to tighten it. Or, if your lens was loose, a tiny dab of adhesive on a pin could secure your lens just let it dry before screwing the cover back on.

Warranty:

One year

After everything has been said and done, I'm glad I decided on the Ingersoll Rand R37341-600-VS 250 PSI MAX 1/2-Inch Regulator, Black for my garage.

***NOTE***

This regulator is good for 250 PSI at the inlet. Should you want or need a "piggyback" type filter/regulator for inlet pressures of 175 PSI compressor systems, the ARO filter models with polycarbonate bowls are only rated for a maximum of 140-150 PSI inlet pressures. You can use this R37341-600-VS first in a line and add ARO polycarbonate bowl "piggyback" models after it in a line. The (P39344-610)Ingersoll-Rand P244-610 1/2'' Female NPT Regulator NEW "piggyback" model (metal bowl) accepts pressures of up to 250 PSI at its inlet, and regulates outlet pressure from 0-140 PSI.

Update 4/11/2012:

After using this regulator several days, I decided it was easier to just turn off the pressure on the main line to the regulators, and to turn the R37341-600-VS regulators off by their adjustment knobs. This should make the regulators, hoses, and quick connects, last much longer depressurized during disuse whether or not I disconnect the hoses after use. This regulator also bleeds off pressure on the outlet side as it has its pressure setting changed downward. This feature also makes it easier to connect quick connect couplers when there is no pressure on the fitting.

Made in South Korea

Buy Ingersoll Rand R37341-600-VS 250 PSI MAX 1/2-Inch Regulator, Black Now

Just a regular ol regulator, nothing to get excited about. It does what I need it to do. To those claiming that it leaked air. You will need more than a couple wraps of teflon tape to seal the corse threads. I did about 5-6 and have not had any problems. Pressure adjustment knob took a second to get used to but works well.

Read Best Reviews of Ingersoll Rand R37341-600-VS 250 PSI MAX 1/2-Inch Regulator, Black Here

Pros:

Easy to install

easy to set

seems durable enough

High Flow

Name brand

Cons:

Wish it was made with a little more metal

Want Ingersoll Rand R37341-600-VS 250 PSI MAX 1/2-Inch Regulator, Black Discount?

Just a run of the mill regulator. Does its job. As long as it is regulating the pressure like a want it to, I guess I can't complain. I haven't noticed any leaks or irregularities. I use my compressor weekly and have had no issues in its first year of use.

This regulator seems to be well built. I have had it installed for eight months now and it has performed admirably. I use it for spray painting and nailing.

Compressor Compressed Air Hose - Good Year Rubber 3/8 inch x 100 ft

I needed an air hose that would hold a lot of pressure and stay flexible in the cold and this met the requirements, I would recommend this product to any one that needs a long air hose with plenty of pressure and flexibility. thanks