JET 649005K 22X44 Plus 22-Inch 1-3/4-Horsepower Drum Sander, 115-Volt 1-Phase

• Zinc-plated steel tension rollers mount next to the drum to eliminate slippage
• Drum height and downward pressure are adjustable to eliminate snipe
• 1/16 inch per turn height adjustment for precision accuracy
• Thrust bearing height adjustment for easy adjustments
• Large, easy-to-use cast iron height adjustment handwheel allows both radical height changes and minute adjustments for extremely precise sanding thickness control

I purchased this drum sander a week ago.

I am rating the Performax 22x44 Plus Drum Sander with Closed Stand.

The stand is completely assembled in the box. This is the first machine that I have assembled and didn't have any extra bolts or washers. Assembly was exactly as it was supposed to be with everything lining up perfectly. All allen wrenches were provided for assembly.

I only had to tighten the brake pedal. The paint job is wonderful.

The motor assembly is extremely heavy, however, I was able to assemble the entire machine in 20 minutes.

I purchased the optional infeed/outfeed tables and think they are great but should cost less than $100, more like $50. No, they should be included, but are not necessary.

Performance: The motor is unbelievable quiet. No vibration at all. It is hard to tell sometimes if the motor is running it is so quiet. I sanded a 14 inch wide board and the results were amazing. Dust collection is a must and my Delta 1200 CFM pulls 99% of the dust.

I use a 30 AMP service for the drum sander.

Drum alignment was spot on. It was only off by .002 of an inch. No adjustment needed at all!

I give it 4 stars because the mobile base moves inline and does not allow you to easily steer the machine. I also wished the conveyor motor was a little beefier. No problems. I just would like the assurance. The motor adjusts from 0 to 10 fpm.

(Update 12-1-06: I received the "handy" tool to assist with sanding belt changes. I COMPLETELY disagree with the instructions for changing the sandpaper on the drum. It is not necessary to use this tool. I and my family think this way is much better: Attach the paper to both sides, but do NOT tighten it on the motor side as instructed. Simply tighten it by hand on the left side where you have much more room and can do it with your fingers. If you own this tool you will see exactly what I am talking about. It is so easy this way.

I am so happy I received this machine. It was given as an early Father's Day gift.

4/09 Update: If I were looking today for a sander, I would take a hard look at Steel City's dual drum sander. You can put two different grits of paper on the machine and really move things along. The price is so close. You also get two four inch dust ports on it. I would buy it now if I didn't already have the Jet/Performax. honestly

Buy JET 649005K 22X44 Plus 22-Inch 1-3/4-Horsepower Drum Sander, 115-Volt 1-Phase Now

I purchase quite a bit of tools from Amazon, but I decided to buy this sander locally. There was a sale and mini show going on, so I got 10% off, plus a rep from Jet was there and threw in some free goodies, and I still received the current rebate. That was in January. I've used it on several projects now and can offer an honest review of my experience with it.

First, I'd like to start by saying my shop has become more than just a hobby shop and is quickly approaching a full time business. I felt I needed to reduce the amount of time I spend sanding. Since I already own numerous Jet machines and have been happy with their quality and service, I researched their sanders first and came to appreciate the 22-44 Plus. Out of the box(s) the machine went together pretty easily and needed only minor adjustments to be perfect. Although it did have some minor hidden shipping damage, Jet corrected that promptly.

Next came the learning curve. This is my first "real" sander so a couple sanding belts got ruined by trying to remove too much material at one time. Light cuts are the key. The crank to lower the sanding head moves down 1/64" per 1/4 turn and this is a pretty good reference to use when sanding. Sometimes I take a little more or less depending on the size and specie, but usually 1/4 turn per pass is just right for average size boards.

I've not had any trouble changing belts. After doing it a few times, it takes about 2 minutes and I don't need to use the tuff tool.

The tracking for the conveyor was a little fussy at first. I just dialed it in close and occasionally have to make a minor adjustment. This is real easy to do as Jet has put small wrenches on the adjustment bolts on either side of the conveyor. It takes about 3 seconds to make an adjustment and it can be done on the fly. Usually 1/4 turn on one of the bolts does the trick and it'll be fine for a couple more weeks.

This sander will not totally eliminate the need to hand sand with a random orbital sander, however, it will greatly reduce it. Plus it'll flatten any unevenness. T

The sander will leave a linear scratch pattern similar to a belt sander, even with 220 grit, that will need removed before final finishing. I've found loading up my random orbit sander with a slightly courser grit, the linear lines will remove with a good once-over. For example, if I drum sand to 220 grit, I can remove the scratch marks easily with a light pass of 180 grit in the random orbital sander. Also, a sharp card scraper will remove the scratch lines from 220 grit pretty easily if you prefer scraping over sanding for final finish work. Additionally, I'd recommend sending the boards through the sander 2 or 3 times on the final pass without changing the depth of cut. It'll reduce the depth of the scratch pattern and make sanding/scraping easier.

Notealthough I suppose boards could be thickness sanded, it would take a looong time, so keep the planer for getting lumber close, and then drum sand to final dimension.

I took the rebate check from Jet and bought the extension infeed/outfeed tables for the sander. They are real nice for longer boards, easy to install and very stout. When installing, keep them just slightly below (mine are .04", or the thickness of a piece of 80 grit sandpaper folded in half) the height of the conveyor or else it will not feed right. I highly recommend the tables.

The fit and finish of the machine is on par with the rest of the Jet tools I own. They do a nice job finishing their tools. This is probably the least important to me when purchasing a tool as I buy them to work, not to sit and be pretty. But still, I do take care of them and it's nice they look so good year after year.

The machine comes with casters built in to the base. The casters are fixed, so they do not swivel. Nice for moving the machine back and fourth but not so nice for moving around. I'm tall and need to raise the machine up a few inches to be comfortable anyway, so a custom mobile base is in the works.

The sander saves me an untold amount of time and produces smooth parts of equal thickness. It is connected to a Jet 1100 dust collector and sanding is nearly a dust free operation.

The machine is a joy to use. Plus, it's pretty quiet. I'd purchase it again without reservation. --dave

Read Best Reviews of JET 649005K 22X44 Plus 22-Inch 1-3/4-Horsepower Drum Sander, 115-Volt 1-Phase Here

The Jet 22-44 is a very good drum sander. I have extensively used a Delta 16-32 drum sander for a number of years and was able to sell it for nearly what I paid for it so the upgrade to a wider unit was financially feasable. I took a look at a lot of machines and read through a lot of the operators and parts manuals. This looked to be the most foolproof, reliable, easy to operate and should have a low operational cost.

The machine came in three boxes and were very well packaged. The boxes contained the sanding head, cabinet, and conveyor belt. Assembly is very easy. The sanding head goes on top of the cabinet and then the conveyor goes inside of the sanding head. The conveyor even features ceramic guides to help eliminate creep of the conveyor belt. I have yet to adjust the belt tracking. A standard 20 amp circuit is sufficient to operate the sander. No special wiring is needed.

The smart sand feature works well on the machine. I can set the belt feed to 60 or more and the smart sand will slow the belt down when wider stock is fed through and back up when narrower stock is sanded. This feature has really made using this unit a real pleasure as I dont worry about stalling the motor, burning/gouging the stock, or ruining the sand paper. The key is don't take too much off during a pass.

Turn the depth wheel 1/4 of a turn for the next pass or 1/8 turn for highly figured or unusually hard woods like locust or wenge. I usually check the temperature of the wood on exit and put it aside if it starts to get fairly warm. No scientific data but it does seem to help eliminate spotty burn marks especially around the occasional knot that may be present. these usually will hand sand out fairly easily but why not eliminate it from the start.

Working with burl, birdeye and other highly figured woods sucepible to tearout on a planer/surfacer is very easy with this machine. It just takes a little more time to surface down these woods. Sanding surfacing makes it possible to make some very nice projects much easier.

After using it to sand over 1000 bf of oak and walnut I have no concerns. I use 80 grit most of the time and then sand with a random orbit sander with 80 and then 120 and its ready for finish. On door panels I will sand the individual parts right after the dry fit so there are no cross grain scratches. Finish sand after glue up. I have also glued up and then sanded the whole panel. in this case its better if you drum sand to 120 before the finish sanding to hel get the cross grain sanding marks out. Also becareful (as one should anyway) when gluing up to assure the style is in plane with the rail. Sometimes the clamp can cause this problem if the jaws are not perfectly parallel on the clamp. But this machime can certainly sand it flat again should this happen.

The inline stand seems a bit narrow especiallly given that the feed table overhangs it by a ways but it is not a stability issue. I dont mind the inline wheels as the machine is usually pulled straight out from its storage location for use and rolls straight back in when done.

The optional feed tables should have come with the unit but it is possible that one would not need these if running stock of less than 3 or 4 feet long. It does take up more space. I would have liked to seen a design where the table was a set of arms with a roller that would flip up then one could feed stock with the roller arm up or down and flip them up for storage. When running wide stock say 40 inches like on a table top then give the stock some support on the edge that is not under the drum head. In/out feed rollers are recommended for stock 5-6 ft and longer.

Dust collection is mandatory. And an ocassional cleaning of the paper is good too. Soft woods like pine dont do well as it clogs the paper rapidly. Hard woods like oak, walnut, et al work very well.

Changing sand paper is easy. The handy tool they give you is still sitting in the package. I found that it was easy to change the paper with out it. Though my fingers are fairly thin, others may find it difficult to pull on the sandpaper clamp. The tool would be useful in these cases. Start on the outboard side and wind your way to the tensioner on the inboard (motor) side. I re-checked the sand paper tension after running a board after changing the sand paper and found it not necessary. The right hand side has a tensioner on the sndpaper clamp and it keeps the sandpaper taught. Only a little practice is necessary and changing sandpaper is easy.

The sander came nearly perfect on the paralellism. It is easy to see that it could be a bit frustrating to set paralellism if needed but no more than say setting jointer or planer blades. In fact it should be a bit simpler as there is only the one drum to set. Careful snugging, checking, and then tightening of the bolts should eliminate any creep in the adjustment.

I did notice a curious oddity when making a thin piece of veneer od about 1/16" thick. The drum was making contact with "something" when lowering it down to the thickness of the veneer. It turned out that my dust collection system had enough suction that it was actually picking up the belt. The belt appeared to be tight enough and closing down the gate partially for the sander solved the problem. The sander doesn't need a large volume of air as the particulate size is rather small. Not often when things work too well that causes an unexpected negative consequence. I don't make veneers very often but this most certainly is one of those "not in the book" things you learn.

In short this is a great machine.

Want JET 649005K 22X44 Plus 22-Inch 1-3/4-Horsepower Drum Sander, 115-Volt 1-Phase Discount?

When this thing is tuned and working properly, it's a great machine. Alas, those moments are rare. I spend more time adjusting it than actually using it.

First, setting the sanding drum parallel to the table is a pain in the ass. The owner's manual says that parallelism is set at the factory and should not hafta be set by the owner. When I received mine, it was out by 3/8"! This is a huge amount. Obviously, the quality control department was at lunch when my machine was assembled.

To set the parallelism, four bolts are loosed and a knob is turned. The problem arises from the fact that there is so much play in these components, that by the time everything is re-tightened, it is out of parallel again. So, to set it is very much a hit-or-miss process.

Second, attaching the sandpaper belt to the drum is another pain in the ass. There are two clips that hold the sandpaper, one on either end. The first one is easy to set because it is on the outboard and you can see it and reach it. But the in-board clip cannot be seen. The clearance between the drum and the frame is really tight. Performax supplies a wire thingamajig to open the clip and keep the sandpaper taut. This works kinda. But if you have bear paws for hands, forget it.

Third, it's tough to keep the sandpaper taut. Pulling the sandpaper taut, working the thingamajig and pulling the tab into the clip is an exercise in frustration. Then the belts will stretch and need to be re-tightened. And the belts will always rise away from the drum by about 1 mm where they turn into clip. The clip is at 90 degrees to the drum, so, you could crease the sandpaper so it fits better but when you do that, it weakens the sandpaper and it will break. So, with this bump, you really don't have a full 22" because it doesn't sand correctly at the bump in the sandpaper. And forget trying to sand something 44" wide-I'd rather use 36 grit as toilet paper than sand a wide face frame.

Fourth, wood burns for no apparent reason. I get these areas, usually 3/8" wide where something attaches itself to the belt and boom, there is a band of pitch that is burned onto the sandpaper and will never come off. This pitch immediately starts gouging the wood. I use a dust collector rated at 1100 CFM and I clean the belt often with a crepe rubber stick. Also, whenever I sand something greater than 6" wide I increase the depth of cut only 1/8 of a revolution at a time (1/128"). So, I've come to the conclusion that this is underpowered.

The automatic feed limiter doesn't solve this problem. In fact, if the feed limiter kicks in, at least 50% of the time, I'll get a wide swath of burn marks. So, I always feed so slow the feed limiter doesn't kick in.

Fifth, the belts break long before the abrasive is gone. And given the cost of these belts, it makes using this machine too expensive.

So, unless you like fiddling with your machines more than you like working wood, stay away from this.

Oh, there are a few good points. The stand is nice and sturdy. The casters are great. And the stand has a nice shelf to store sandpaper. Nice paint job too.

UPDATE A friend reccommended that I not use the crepe rubber to clean my belts. This has helped reduce burning a lot. So, I would now give this machine 3 stars and strongly reccommend that you do not use the crepe rubber pad sold by Grizzly for cleaning drum sanders.

Save 6% Off

After looking at the units offered by Delta and Grizzly and reading the reviews I opted for the performax. The machine arrived very well packed (it came in 4 separate boxes and was delivered by two different carriers on two different days AHHH!!!). I spent maybe an hour putting things together and tuning it up. The sander was out of parallel but this was an easy fix. After assembly I noticed the depth gage was missing. A quick call to WMH customer service and I had the parts in two days(they could not have been nicer).

My only complaint is the casters are inline and do not allow for turning the machine when you move it. As for tracking the conveyer belt it took about two minutes and has not moved since. All the complaints I have read about these machines lead me to conclude that the buyers were trying to cut too deeply and to fast. I will also say that abrasive planning is definitely possible if you go slow and take shallow cuts. I surfaced a 33"X48" butcher block counter top with this sander and the results were very impressive. Like very machine in a shop, you just have to take time to learn it and its limitations. I highly recommend this tool for any small pro shop or the very serious hobbyist.

Senco PC0974 Micro Pinner Compressor Combo Kit

• The FinishPro 10 drives 1?2-Inch1-Inch 23 gauge micro pins.
• The SENCO PC1010 Compressor is a 1/2 hp, 1-Gallon, oil-less portable air compressor. Its' lightweight, rugged design will satisfy the needs of the pro!
• Designed with a rubber rear bumper to protect wood surface
• 1/2 hp, 1-Gallon oil-less compressor includes a tank pressure gauge and an outlet pressure gauge
• Compressor generates a maximum air pressure of 120 psi

Our shop did not know about the micro pinner until I saw it in your magazine.After the kit arrived,I gave it to the shop and it has been used every day since then.I found the price to be better than any place locally,plus it was delivered to my door.Thank you.

Buy Senco PC0974 Micro Pinner Compressor Combo Kit Now

The small compressor and the 23 guage micro pinner gun are great.

The compressor is light weight and is easy to transport to a job site. The micro gun works great for attaching screen mouldings, panels, and small crown on cabinets with minimal filling. I have been using the gun on the job site for about 2 years now and it has only jammed a few times. I think this is to be expected when you take in concideration the types of wood, pressure settings, and accidental double trigger hits. I do recommend this compressor combo kit to my friends and family.

Read Best Reviews of Senco PC0974 Micro Pinner Compressor Combo Kit Here

Great Little Compressor. If you haven't seen one of these I can't stress how small and light these things are.

I'm a general contractor and let all the guys use this towards the end of the project when I don't want them hauling a 40lb compressor through the finished house. works great with the micro pinner and will run a Senco finish nailer no problem. Don't use it for production with a 16g gun but it is fine for pick up, or that casing that you forgot to nail off properly.

The micro pinner is a gem, you barely know there is a fastener, one coat of finish either paint or a clear finsh and they fill in.

The painters love them because they are so easy and FAST to fill or just paint over.

This isn't the first nail gun or compressor you should buy, unless you ar a hobbyist doing craft work, but it is a very nice tool.

Want Senco PC0974 Micro Pinner Compressor Combo Kit Discount?

while the kit is comprehensive and the compressor works well, the micro Pinner is junk. This is the second Senco mirco pinner that I have purchased and the second to fail. This gun refuses to set 3/4" pins at all. It leaves the heads sticking out on every shot. My first senco lasted about 2 months before it jambed and refused to work. I purchased a Fastco micro pinner 3 years ago for twice the price but I've never had a problem. It seems product quality for senco has taken a back seat to economy and unreliablity( As there fiasco with the AIR FREE 40 cordless nailers proves.) I am a licensed Contractor who only does finish work. My tools must be the best and this product is not.

Save 23% Off

I'm not well-versed in the use of power tools and bought this set to assemble RTA cabinets for my kitchen. The micro pinner performed flawlessly with 1" pins. The compressor is small, but powerful enough to do the job. My contractor opted to use the Senco compressor instead of his own because it was so easy to use and move around. He must have hinted at least 3 times that he wanted it to be his "bonus". Sorry, buddy, but I'm really attached to it!

Makita MAC2400 Big Bore 2.5 HP Air Compressor

• Oil lubricated: Cooler running pump, minimizes wear
• Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance
• Built-in thermal overload for additional motor protection
• Large automotive style industrial air filter for increased air intake and greater efficiency
• One-year manufacturer's warranty

I think it's the best for the following:

A) This compressor just purrs. People are amazed when it's running. Big rubber feet also help prevent transmitting vibration to whatever it's sitting on, so no more vibrating boards.

B) Over-built compressor compared to tank size so cycle times are very short if using light-duty tools, it doesn't run much anyway. Also runs way more cool than others I'll save those sear lines for my steak on the grill not my forearm.

C) No leaks holds its air pressure seemingly forever when turned off (not that you shouldn't release pressure when done using it).

D) The air filter is a miniature version of an old-time car air filter. For a unit that's going to be sitting on the ground amidst swirling construction dust, this is a big plus.

E) It does indeed weigh in, but at least the design is very compact. The frame wraps around and protects most of the important stuff, so there are no lines, wires, etc. waiting to be snagged. The glaring exception is the air filter hanging off the side I can see this part's going to be replaced at some point when I throw it in a truck bed. No problem for shop use though.

Be forwarned Makita's packaging designers always seem to get it 90% right. In this case, the air filter is just thrown in loose inside the box mine broke one of the gauge glasses. If pressed, their warrantee dept. will send out small parts, but it's a PITA to get a product this good only to have to fix it right out of the box. Also pay attention to the "break-in" procedure run it for @30 minutes with no load, open petcock, to seat the rings.

Buy Makita MAC2400 Big Bore 2.5 HP Air Compressor Now

I do not want to repeat what all the other reviews have said. This is a quality compressor. In this day and age of plastic junk, I am surprised some of the reviews complained about wieght. The weight comes from steel, not plastic parts. The tanks are heavy steel as is the roll cage around the entire mechanism. The handle is in the center, so carrying it is well balanced.

The compressor is just as quiet as others report. I have it in the corner of my workshop about 10 from me. The start up instructions are easy and you are up and running in 20 minutes.

Why did I get this compressor? In sum, (1) I wanted a GOOD quality tool that was not Chineese junk, (2) I wanted at least 4 cfm for tools and (2) I did not want to spend a fortune. There seems to be several classes or levels of compressor in the lower price range. Unless you are getting a specialized mini-compressor just for a small brad gun, the $125-175 compressors are mostly junk: loud and rough. This Makita is in the next step up, with compressors in the $225 to 325 range. There are some Dewalt Emglo and others I looked at in this range. Most of this second tier are either made for just for job sites or are just bigger cheaply made compressors.

I chose the Makita over the Dewalt for one reason: quiet. The Dewalt is an excellent compressor, but you cannot use it next to you in an exclosed shop -its too loud.

So, I wanted a quality tool and one that could live in the shop next to me. The Makita does both in spades. It is a very well made little compressor. The fit and finish is great. It has a dual personality: it works and looks great in the corner of the shop AND is perfect for taking to a job site or the back yard. Best of both worlds.

The compressor seems to live up to its specs. I have easily run 3/8 and 1/2 inch impact wrenches, a brad gun and a finish nail gun, along with blow guns, etc. When I went to use a Snap-On 7200 3/8" air ratchet, the performance was just adequate. Then I read the spec for the ratchet and it calls for 4.5 cfm. The Makita is rated at 4.2. SO, you do have to watch the cfm ratings on tools: I am sure a 8 cfm jitterbug sander will not work. But then again, that is not the type of tool I wanted this for.

I have not owned a compressor is many years. I looked long and hard for the best of all worlds: quality, size, price, and cfm. As an advanced and serious home workshop dude, this review is not written for the pros. But for a serious homeowner that appreciates quality tools and needs a general purpose compressor, I believe I found the perfect compressor.

Lastly, no shop came close to Amazon on total price, in large part due to the free shipping.

Read Best Reviews of Makita MAC2400 Big Bore 2.5 HP Air Compressor Here

I needed a compressor to put up a fence, install mouldings and refinish my basement. After a TON of research, I settled on this Makita. I am very pleased. It's quiet, very well built and easy to use. So far I've run a framing nailer and brad nailer with no problems.

I've read other reviews that speak to the weight of this unit. Well, it's a compressor and they ARE heavy. That's just how it is. Especially a high-quality compressor like this one. It's not a tinny piece of junk and there's only plastic on it where it makes total sense no where else. Makita also puts a NICE molded rubber handle on it that doesn't shift or move one bit. The thing's built like a tank and looks great. I have yet to trip a 15-Amp breaker with it.

Additional comments:

The finned discharge tubing on this thing is fantastic if you've never had your hand seared like a steak after touching discharge tubing on a compressor, you haven't truly felt pain. I've brushed the tubing with the motor running on this one (accidentaly) and where my hand normally would have STUCK, it was only warm. Very nice touch.

The tanks fill quickly enough, and the gauges are really nice quality. The pressure regulator is pretty easy to adjust once you get the hang of it.

Again, the noise level is excellent. I can use the compressor in my basement shop and can barely hear it running on the main level. I can have a pretty much normal conversation with it running 10 feet away in the same room.

If you're looking for a high-quality, oil-lube (don't know why anyone would go for a non-oil unit) compressor that will last for years, look no further.

Want Makita MAC2400 Big Bore 2.5 HP Air Compressor Discount?

I researched portable compressors for months before deciding on the MAC2400. It had all the features I wanted oil lube, low rpm, lower decibel rating(quiet) and decent cfm rating. After receiving and testing I do believe the 4.2 cfm @ 90 rating is stretched a little. I also have to agree with others as this is a heavy unit to be lugging around daily but I knew that before ordering. Even with weight I was quite pleased with the compressor but my buying experience was much less.

My first compressor from Amazon had a broken plastic motor cover which wasn't caused by shipping damage. There seems to be a wide spread problem with some of these and also the mac700's.

I sent it back and Amazon had a replacement back to me in 3-4 days, Quick!, but that compressor also was damaged. The air cleaner housing was thrown on top of the compressor and beat up the control panel and one gauge from bouncing around. My 9 year old son asked me why they didn't tape it down or put between the cardboard packing. Funny how the Makita packaging engineers couldn't figure that one out.

I called Makita and they would not cover damage but could send me the control panel for $45.00. I was told to contact Amazon and after a week of waiting on Amazon, I was told that they could not send part (it would void warranty if replaced) and they were not going to send a replacement compressor. I packaged up the second compressor and sent back. I wasn't going to order another brand compressor from Amazon as I didn't want the hassle if damaged again. I went to H.D. looking at Ridgid as I really didn't want a Dewalt or the Porter Cable pancake compressor which they carried. I bought a Ridgid model with a higher cfm rating, larger air tanks, wheels, handle and it came out of box without a scratch. A very nice quality built unit, a couple decibels louder but less vibration than the Makita MAC2400. The wheels on this unit are great, solid tires-no flats. After moving it around the house and up the stairs, I don't know how long I would have enjoyed carrying the MAC2400 or any other brand compressor that weighs 70-80lbs.

Overall the MAC2400 looked and sounded like a good compressor for the short time I had it but makes me wonder how well they are built, with so many problems between packaging and broken parts inside cartons not caused by shipping damage on the Mac700's and a few of these. If you are not in a hurry for a compressor and/or don't care about cosmetic condtion out of the box (if damaged) then Amazon is the place to buy with their best price. I you need one right away and are particular about quality, I would seriously look elsewhere to purchase. I have a feeling I wouldn't have had these problems if ordered elsewhere and paid a little more.

Saving money is great, but in my case the savings were not worth the time wasted and the hassles, now that I look back.

Save 39% Off

I am a general contractor and framer. This compressor is amazing!! I've opperated many compressors over the years, and this is the quietest, most well built compressor I've seen. It also has a good recovery time. I can nail off sheathing on a roof and this little beauty keeps right up with me.

A great compresser for the operation of one framing gun at a time. It has no trouble keeping up no matter what you are doing. I wouldn't recommend it for two framing guns at once.

Though it might keep up framing walls, but not with sheathing.

AWESOME COMPRESSOR!!!!!!!!!