Porter-Cable CFFN251N Two Nailer 2-1/2-Inch Finish and 1-1/4-Inch Brad and Compressor Combo Kit

• 6-Gallon tank
• Nailers feature jam release mechanism
• Portable pancake-style compressor
• Compressor weighs 34 pounds
• Complete kit

I was looking for a compressor that was easily movable , yet still had the capability to power a nail gun without having to run all the time. I also needed a brad & finish nailer. Porter Cable's CFFN251N, Combo kit fit the bill . The directions are easy to read. Connecting the hoses to the compressor & nailer is pretty intuitive, The operating directions are instructive if you haven't used this type of equipment before. Including reading all of the instructions I was using the equipment with in a half an hour of opening the box. The equipment has performed flawlessly so far. One of the reasons I wanted Porter Cable nailers is that in addition to be being easy to use , it's supposed to be easy to remove a jammed nail from the gun. The nailers are certainly easy to use. I have shot several hundred nails & brads using Porter Cable nails but have not had a single jam. So I don't know how easy it is to remove jammed nails. The tank is not large but at 150 psi max pressure you can drive a lot of nails before the compressor cycles on again. The compressor is not particularly quiet , but the noise is acceptable. The equipment is very portable. I can easily move the compressor to wherever I am working & I have 25 feet of hose that enables me to move around a room without moving the compressor all the time. I would recommend this kit for anyone who needs a brad & finish nailer as well as a portable compressor.

Buy Porter-Cable CFFN251N Two Nailer 2-1/2-Inch Finish and 1-1/4-Inch Brad and Compressor Combo Kit Now

pros

its light

compact (you can toss it in the back of your truck)

its so light you don't feel the need to find a spot on the floor for this one (its oil less) so its not so imp. where u put it

lot of air to frame a house

or texture a room

or 3 trimmers

big tank for hand carry

good price

cons

its so loud that you cannot talk to someone in the room without yelling

when i say loud what i mean is

open the hood of your car lean over the engine think v8 1987

have someone rev the motor

thats exactly how loud it is

so if you can live with noise

get it its great

i cant

Campbell Hausfeld HU502000AV 20-Gallon ASME Air Compressor

• 20-Gallon air tank
• 1.3 HP electric pump
• 150 max PSI
• Low-maintenance oil-free pump
• Easy to access gauges and knobs

When I received the compressor and opened the box, the compressor housing appeared to be cracked and broken in a couple places and the compressor/motor assembly was loose on the tank. After inspecting the item it looked like the black plastic housing was indeed damaged. I called the company and gave them information and they said they would send a new housing, which did arrive about 10 days later. When I went to replace the housing assembly which required removing the compressor/motor assembly from the tank, I discovered that the cast aluminum frame of the assembly was broken off at the corners. This unit was obviously dropped on its top either before it left the warehouse or in transit. I have since been in contact with Campbell Hausfeld customer service at least 3 times now by way of email or by phone call and to one person in particular. This is becoming a classic case of "I'll get back to you later today" and they have not except for the first response. The customer service representative has said she needs to "check with her boss" about this. I frankly don't see what the hold up is. I sent her pictures of the broken assembly, and have asked that they send me a new one, since it is a part that is clearly shown on their parts diagram of the compressor. Campbell Hausfeld needs to make this right. I have tried to be patient in waiting for their action, but its going on a week now since I made the call.

Buy Campbell Hausfeld HU502000AV 20-Gallon ASME Air Compressor Now

This is a simple review the unit was delivered with metal brackets broken off inside the plastic houseing called the local dealer and was told it was the shippers problem.to get the unit out had to cut the box off and was unabie to return.

Read Best Reviews of Campbell Hausfeld HU502000AV 20-Gallon ASME Air Compressor Here

Still working well so far. Keeps good pressure and doesn't lag too much even when using a large blowgun with it. Great for a homeowner's occasional use.

Want Campbell Hausfeld HU502000AV 20-Gallon ASME Air Compressor Discount?

Does exactly what I need it for, the occaisional ball or wheel fill and can handle any house or shop project requiring an air sprayer or nail gun. Uses less space due to the upright orientation, and I love the brass drain fitting that won't be caked with rust in a year or two. Oil-free for easy intermittant usage, about as quiet as an air compressor can be. I read a few reviews about shipping damage or arriving in poor shape, but I watched and noted everyting (I uploaded photos about the packaging). It arrived with some of the internal foam chewed up but after vacuuming up the krinkles in the box, I pulled it out, put in 4 screws for the handle, and attached the two wheels, fired it up and it ran to full pressure and cut off with no leakage or issues. Slick little unit with enough oomph for slightly larger jobs but small enough to tuck away in the garage. I also like the really big Rubber Bumpers on the rest to keep it from rattling or moving when running.

Bought this at Lowes floor person had no idea what he was talking about but bought it in spite of him. Easy set up f or 1 person works as promised. Don't miss instructions on break in. Takes a lot of power cant have lights on in garage or it doesn't run right. Overall I would recommend.

Grex Tritium.TG3 Double Action Pistol Style Trigger Top Gravity Airbrush, 0.3mm Nozzle

• Easy-to-use and ergonomic double action "pull" trigger controls both air and paint
• Internally mixed, cutting edge design for precise control of fine detailed work.
• Interchangeable top mount reservoirs with integrated paint cup for minute amounts of paint
• Patented Quick-Fit needle caps are quick and easy to setup and remove
• Replaceable solvent proof teflon seals, precision machined stainless steel nozzle and needle

Used one at a model convention and came home and ordered one. Pistol grip gives you total control and ease to operate. I would recommend this airbrush to everyone.

Buy Grex Tritium.TG3 Double Action Pistol Style Trigger Top Gravity Airbrush, 0.3mm Nozzle Now

This airbrush works great! Very easy transition if you work with traditional trigger style air guns. This airbrush performs as well as my Iwatta. If you prefer trigger style painting then this this air brush is for you. It is priced slightly higher than other air brushes but the performance and design was worth it for me.

Read Best Reviews of Grex Tritium.TG3 Double Action Pistol Style Trigger Top Gravity Airbrush, 0.3mm Nozzle Here

I've been using an Iwata Custom Micron CM-C Plus for a few months (I'm a beginner with airbrushing). While attending the RCX (Remote Control vehicles) Expo I watched a fantastic demo from one of the guys at Grex and was instantly sold on trying this airbrush. Got it home and was instantly blown away. I thought Iwata was the gold standard of airbrushes but this Grex was more comfortable, gave me more precise lines, elimited the splatter I had been getting with my Iwata, and was just overall superior to the other airbrush. Selling the Iwata and sticking with the Grex now. I hope these guys get some more publicity because their product is great.

A friend of mine was at the show with me and had the exact same experience. Highly recommend.

Want Grex Tritium.TG3 Double Action Pistol Style Trigger Top Gravity Airbrush, 0.3mm Nozzle Discount?

I have tried and own several airbrushes. The Grex is by far the best I have ever used. Cost is not terrible and with the pistol grip it gives me far better control than any I have ever used. This will be the only brand i will buy from now on. I also use hvlp guns a lot in my business and plan on purchasing a Grex X1000 in the near future. I would recommend this airbrush to anyone.

Makita MAC2400 Big Bore 2.5 HP Air Compressor

• Oil lubricated: Cooler running pump, minimizes wear
• Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance
• Built-in thermal overload for additional motor protection
• Large automotive style industrial air filter for increased air intake and greater efficiency
• One-year manufacturer's warranty

I think it's the best for the following:

A) This compressor just purrs. People are amazed when it's running. Big rubber feet also help prevent transmitting vibration to whatever it's sitting on, so no more vibrating boards.

B) Over-built compressor compared to tank size so cycle times are very short if using light-duty tools, it doesn't run much anyway. Also runs way more cool than others I'll save those sear lines for my steak on the grill not my forearm.

C) No leaks holds its air pressure seemingly forever when turned off (not that you shouldn't release pressure when done using it).

D) The air filter is a miniature version of an old-time car air filter. For a unit that's going to be sitting on the ground amidst swirling construction dust, this is a big plus.

E) It does indeed weigh in, but at least the design is very compact. The frame wraps around and protects most of the important stuff, so there are no lines, wires, etc. waiting to be snagged. The glaring exception is the air filter hanging off the side I can see this part's going to be replaced at some point when I throw it in a truck bed. No problem for shop use though.

Be forwarned Makita's packaging designers always seem to get it 90% right. In this case, the air filter is just thrown in loose inside the box mine broke one of the gauge glasses. If pressed, their warrantee dept. will send out small parts, but it's a PITA to get a product this good only to have to fix it right out of the box. Also pay attention to the "break-in" procedure run it for @30 minutes with no load, open petcock, to seat the rings.

Buy Makita MAC2400 Big Bore 2.5 HP Air Compressor Now

I do not want to repeat what all the other reviews have said. This is a quality compressor. In this day and age of plastic junk, I am surprised some of the reviews complained about wieght. The weight comes from steel, not plastic parts. The tanks are heavy steel as is the roll cage around the entire mechanism. The handle is in the center, so carrying it is well balanced.

The compressor is just as quiet as others report. I have it in the corner of my workshop about 10 from me. The start up instructions are easy and you are up and running in 20 minutes.

Why did I get this compressor? In sum, (1) I wanted a GOOD quality tool that was not Chineese junk, (2) I wanted at least 4 cfm for tools and (2) I did not want to spend a fortune. There seems to be several classes or levels of compressor in the lower price range. Unless you are getting a specialized mini-compressor just for a small brad gun, the $125-175 compressors are mostly junk: loud and rough. This Makita is in the next step up, with compressors in the $225 to 325 range. There are some Dewalt Emglo and others I looked at in this range. Most of this second tier are either made for just for job sites or are just bigger cheaply made compressors.

I chose the Makita over the Dewalt for one reason: quiet. The Dewalt is an excellent compressor, but you cannot use it next to you in an exclosed shop -its too loud.

So, I wanted a quality tool and one that could live in the shop next to me. The Makita does both in spades. It is a very well made little compressor. The fit and finish is great. It has a dual personality: it works and looks great in the corner of the shop AND is perfect for taking to a job site or the back yard. Best of both worlds.

The compressor seems to live up to its specs. I have easily run 3/8 and 1/2 inch impact wrenches, a brad gun and a finish nail gun, along with blow guns, etc. When I went to use a Snap-On 7200 3/8" air ratchet, the performance was just adequate. Then I read the spec for the ratchet and it calls for 4.5 cfm. The Makita is rated at 4.2. SO, you do have to watch the cfm ratings on tools: I am sure a 8 cfm jitterbug sander will not work. But then again, that is not the type of tool I wanted this for.

I have not owned a compressor is many years. I looked long and hard for the best of all worlds: quality, size, price, and cfm. As an advanced and serious home workshop dude, this review is not written for the pros. But for a serious homeowner that appreciates quality tools and needs a general purpose compressor, I believe I found the perfect compressor.

Lastly, no shop came close to Amazon on total price, in large part due to the free shipping.

Read Best Reviews of Makita MAC2400 Big Bore 2.5 HP Air Compressor Here

I needed a compressor to put up a fence, install mouldings and refinish my basement. After a TON of research, I settled on this Makita. I am very pleased. It's quiet, very well built and easy to use. So far I've run a framing nailer and brad nailer with no problems.

I've read other reviews that speak to the weight of this unit. Well, it's a compressor and they ARE heavy. That's just how it is. Especially a high-quality compressor like this one. It's not a tinny piece of junk and there's only plastic on it where it makes total sense no where else. Makita also puts a NICE molded rubber handle on it that doesn't shift or move one bit. The thing's built like a tank and looks great. I have yet to trip a 15-Amp breaker with it.

Additional comments:

The finned discharge tubing on this thing is fantastic if you've never had your hand seared like a steak after touching discharge tubing on a compressor, you haven't truly felt pain. I've brushed the tubing with the motor running on this one (accidentaly) and where my hand normally would have STUCK, it was only warm. Very nice touch.

The tanks fill quickly enough, and the gauges are really nice quality. The pressure regulator is pretty easy to adjust once you get the hang of it.

Again, the noise level is excellent. I can use the compressor in my basement shop and can barely hear it running on the main level. I can have a pretty much normal conversation with it running 10 feet away in the same room.

If you're looking for a high-quality, oil-lube (don't know why anyone would go for a non-oil unit) compressor that will last for years, look no further.

Want Makita MAC2400 Big Bore 2.5 HP Air Compressor Discount?

I researched portable compressors for months before deciding on the MAC2400. It had all the features I wanted oil lube, low rpm, lower decibel rating(quiet) and decent cfm rating. After receiving and testing I do believe the 4.2 cfm @ 90 rating is stretched a little. I also have to agree with others as this is a heavy unit to be lugging around daily but I knew that before ordering. Even with weight I was quite pleased with the compressor but my buying experience was much less.

My first compressor from Amazon had a broken plastic motor cover which wasn't caused by shipping damage. There seems to be a wide spread problem with some of these and also the mac700's.

I sent it back and Amazon had a replacement back to me in 3-4 days, Quick!, but that compressor also was damaged. The air cleaner housing was thrown on top of the compressor and beat up the control panel and one gauge from bouncing around. My 9 year old son asked me why they didn't tape it down or put between the cardboard packing. Funny how the Makita packaging engineers couldn't figure that one out.

I called Makita and they would not cover damage but could send me the control panel for $45.00. I was told to contact Amazon and after a week of waiting on Amazon, I was told that they could not send part (it would void warranty if replaced) and they were not going to send a replacement compressor. I packaged up the second compressor and sent back. I wasn't going to order another brand compressor from Amazon as I didn't want the hassle if damaged again. I went to H.D. looking at Ridgid as I really didn't want a Dewalt or the Porter Cable pancake compressor which they carried. I bought a Ridgid model with a higher cfm rating, larger air tanks, wheels, handle and it came out of box without a scratch. A very nice quality built unit, a couple decibels louder but less vibration than the Makita MAC2400. The wheels on this unit are great, solid tires-no flats. After moving it around the house and up the stairs, I don't know how long I would have enjoyed carrying the MAC2400 or any other brand compressor that weighs 70-80lbs.

Overall the MAC2400 looked and sounded like a good compressor for the short time I had it but makes me wonder how well they are built, with so many problems between packaging and broken parts inside cartons not caused by shipping damage on the Mac700's and a few of these. If you are not in a hurry for a compressor and/or don't care about cosmetic condtion out of the box (if damaged) then Amazon is the place to buy with their best price. I you need one right away and are particular about quality, I would seriously look elsewhere to purchase. I have a feeling I wouldn't have had these problems if ordered elsewhere and paid a little more.

Saving money is great, but in my case the savings were not worth the time wasted and the hassles, now that I look back.

Save 39% Off

I am a general contractor and framer. This compressor is amazing!! I've opperated many compressors over the years, and this is the quietest, most well built compressor I've seen. It also has a good recovery time. I can nail off sheathing on a roof and this little beauty keeps right up with me.

A great compresser for the operation of one framing gun at a time. It has no trouble keeping up no matter what you are doing. I wouldn't recommend it for two framing guns at once.

Though it might keep up framing walls, but not with sheathing.

AWESOME COMPRESSOR!!!!!!!!!