Goodyear i5000 Cordless Tire Inflator and 12-Volt Power Pack

• High pressure 12 Volt portable inflator
• Inflates 14 inch vehicle tire from 0-28lbs of pressure in under 4 minutes
• Inflator operates in 2 different modes: Battery or Directly off vehicle current
• Charges off of AC household current or off 12 Volt vehicle Current, both power adaptors are included
• Built In 12 Volt power outlet to operate cellular telephones, invertors or other 12 Volt equipment

Received the pump when promissed, so far it has worked as advertised. I really like the auto shut off when the tire pressure reaches your selected pressure. Some advice, if you set the pressure for 32 pounds of pressure and the tire pressure is already at 32 psi or HIGHER the pump will not start, it only starts when the tire pressure is BELOW what you set psi for. I have already used it for the kids soccor balls, my vehicle tires (Ford F150) and my travel trailer tires, with air pumps that need to be plugged in the a power source, this would not work on my travel trailer because the standard 10 foot power cord would be too short for me to reach the trailer tires!. It also came in handy when having to winterize my travel trailer by pressurizing the water lines to blow out the water from the lines. Also, a great price for the convenience of not needing to plug it in to an outlet or cigarette lighter!

Buy Goodyear i5000 Cordless Tire Inflator and 12-Volt Power Pack Now

Very good machine, works like a champ. Wish it would tell me when it's full, rather than NOT starting on a tire that is already at full charge. It took me a while to realize this "feature". Great to be wireless!

Read Best Reviews of Goodyear i5000 Cordless Tire Inflator and 12-Volt Power Pack Here

I bought this for my husband as a gift. We have a camper and he wanted something that we could take with us when we travel that doesn't need electricity. The first one we received did not work (worked for about 3 minutes, then quit), but they quickly sent me a replacement and it works great! His father also has this pump, has had it for several years and is quite happy with it!

Want Goodyear i5000 Cordless Tire Inflator and 12-Volt Power Pack Discount?

Be aware that you must cool the unit for 10 minutes after running it for 10 minutes so it doesn't burn out. I added about 4 psi to my vehicle tires and it ran for less than a minute per tire. It runs quiet for an inflator. The built-in lighted dial guage is very accurate, but kind of hard to read because the marks are small and close together.

Setting the target pressure is easy, you just twist the guage until a pointer lines up with the psi you want. The inflator automatically shuts off at that pressure and it is accurate and consistent. No switching back and forth between filling and checking with a separate tire guage and bleeding air to hit the target pressure. The setting stays until you move it again, so you can bring all your tires to the same pressure without re-setting it for each tire. No fuss like with a digital one. Super convenient.

I recommend charging the battery immediately after use and keeping it fully charged at all times. The lead acid battery will have the longest lifetime that way. Once the battery gives out, the only way to run it is directly powered from a 12V vehicle outlet.

The manual and the labelling of switches and sockets is a little confusing, but operation is not overly complicated. There are two switches and two power ports. You'll figure it out.

You could burn it out with a big job like completely filling an RV tire, raft, air tank, etc. unless you stop every 10 minutes. As long as you stay within the limits, this will be a good tool. Probably the most convenient way to maintain vehicle tire pressures.

Works great. This item has a way of pre-selecting the amount of tire pressure and you let it run until the tire is properly inflated. Good buy.

Pressure Switch for Air Compressor 95-125 Single 1 Port w/ Unloader & On/off Lever

• 95-125 psi factory preset regulated, you can regulate as you need between 35-150 psi
• ¼" COMPRESSION UNLOADER VALVE
• ¼" FEMALE NPT TANK CONNECTION WITH 3 EXTRA 1/4" PORTS
• 20 AMPS
• Corrosion Resistant and Non Metallic Cover

ordered this part for my compressor was almost the same as the original but works way better is adjustable plus has an on off switch what a well built piece

Buy Pressure Switch for Air Compressor 95-125 Single 1 Port w/ Unloader & On/off Lever Now

This was the best price I could find to replace the pressure switch on medium sized 220 volt air compressor.

Read Best Reviews of Pressure Switch for Air Compressor 95-125 Single 1 Port w/ Unloader & On/off Lever Here

Pressure switch work very good after adapting a coupler in the back and installing a new 1/4 hose. So far Iam happy with this purchase.

Hitachi NR90AE(S) 3-1/2-Inch Full-Head Framing Strip Nailer

• Round-head 2- to 3-1/2-inch framing nailer with selective actuation switch (sequential or bump) for convenience
• 70-120 psi operating pressure; simple tool-free depth adjustment; vibration isolation pads mounted on nose
• 2-piece anodized aluminum magazine, comfortable non-slip rubber grip
• Comes with safety glasses
• Lightweight and well-balanced at 7.5-pounds; 5-year warranty

I have about 11 nailers, all brands, Hitachi seems the best. they don't break, they nail consistently. no one shots more nails through a nailer than i do. we are brutal to our guns, shooting 1000s of nails per week easily (to nail off new sheeting on a typical home requires 2500 nails) and we drop our guns constantly. we don't "set" our guns down, we drop them and if they can't handle it, we don't buy them. our guns end up in the repair shops several times a year but the hitachi least of all and the shop guys think hitachi is the best (and those guys know what they are talking about, all they do is rip these guns apart to see the "weak links" that always need replacing. this price is shockingly good ($180), better than the big orange store by 20 bucks.

NAIL TYPES:

This shoots the most common angle of 21 degree (the strips of nails and the magazine on the gun are set at an angle this angle helps give clearance for the lower part of the tool while being used). I have no idea why most specifications for nailers don't say this because there are strip nails sold that vary from 20-30 degrees and nothing but 21 degree will work in this gun (most nailers are 21 degree but if you're not in the know, this can be a real hassle).

If you are confused about nail sizes (and most guys who are not pro framers seems to be horribly confused), you can look it up but i can make it easy for you. With almost any structural work, you want use a nail thickness (shank, guage, diameter it's called various things but we're talking how fat the shaft of the nail is) of 0.131. You will see thinner (0.113) and thicker (0.148+) don't bother with them unless you know that's what is called for.

You're most common nail for structural framing, is known as "8D common." Not "8D" not "8D cooler" it is precisely 8D common, with a thickness of 0.131 and a length of 2.5 inches. Most codes require that specific/exact/precise nail but of course some things require larger nails, like a 16D but that's about length since the fact is, 8D common and 16D share the exact same shaft of 0.131. If you're confused by some of the various packaging statements, just know that you want to see 0.131 thickness. You can get various lengths for that shank but they are usually 2.5 3.5 inches.

Buy Hitachi NR90AE(S) 3-1/2-Inch Full-Head Framing Strip Nailer Now

I have only been using this nailer for two weeks and it's definitely been one of the best tool choices I've made. During this time it has driven 6,000 3 1/4" stainless ring shank nails into lots of 2 by Pressure Treated. There's really no downside to this nailer that I`ve found. It is very powerful and drives these nails fine as long as the line pressure is at least 100psi. Don't expect a little pancake compressor to feed this rapid fire or you will probably be disappointed. Because I am framing and decking with this gun I found the quick lever adjustment between trigger fire and bump fire to be useful in avoiding unwanted multi-fires. This gun loads very easily, contrary to another review, you can insert your nail strips, then you pull back the tension lever and it will automatically catch after the last nail. I have another 4,000 nails to go for this job and so far it has been a great performer.

Update 4-20-11 I've now put 8,000 3 1/4 SS ring shanks and another 3,000 B & C Eagle 314X120HDR/22 Round Head 3-1/4-Inch by .120-Inch by 20 to 22 Degree Plastic Collated Hot Dipped Galvanized Ring Shank Framing Nail (4,000 per Box)through the gun with no jams and only a couple miss-fires. I am now working away from my big shop compressor and I have borrowed a Bostitch CAP2060P 10.5 Amp 2-Horsepower 6-Gallon Oil-Free Pancake Compressor with a PUR-Hose PUR-38X100 3/8-Inch X 100 Foot Polyurethane 250 PSI Air Hose. It works for about 10 quick shots then you must slow down or even stop while the compressor catches up. I'll shoot another 3,000 stainless and then be done for a while. No problems at all with the nailer

Read Best Reviews of Hitachi NR90AE(S) 3-1/2-Inch Full-Head Framing Strip Nailer Here

I am boggled by negative reviews on the Hitachi NR90AE nailer, have to believe off-brand nails, damaged strip collation and operator error are responsible. I have owned the NR90AE for 3 years, shoot only Hitachi nails and have NEVER had a single jam or miss fire.

Can't shoot 8D and smaller nails? Not for sheathing? ..... Say what? Just shot a box of Hitachi galv 2-3/8" ring shanks into studs through 5/8" sheathing with flawless performance.

Build quality on this "made in Japan" gun is sooooooo superior to all the "made in China" framers out there, super light and balanced, yet powerful with a precise depth of drive adjustment. And you can purchase this high quality tool for less then much of the disposable junk coming out of China, now that's value!

Is it perfect? No, would be nice if Hitachi provided a sky hook and bumpers to protect that beautiful finish and grip sloped surfaces.

Want Hitachi NR90AE(S) 3-1/2-Inch Full-Head Framing Strip Nailer Discount?

I have had the gun for a week and it is an awesome tool. It has loads of power no recoil and a nice placement tip. the trigger is adjustable from bump fire to set fire and its a great gun for the money.

the only bad is that the nails are not the most common nails to find.

Save 54% Off

I have other Hitachi products and have found them to be well made and dependable. This nailer is no different. I've used 3-1/4" and 2-1/4" collated round head nails without a hitch. The loading is different from my Grizz gun in that you load from the back. The tension spring must be held back when loading so you have difficulty loading with it being held rather than set down. My Grizz spring locks back and the nails drop in through the top of the ramp.

The Hitachi is easier to unload with the nails sliding back up the ramp as you hold the spring back.

Depth is very easier to set. I use a dedicated air control as well and adjust it to the lowest optimum air pressure to save unnecessary wear and tear. A 100 PSI works well on the long nails90 PSI for the 2-1/4" nails.

The tool is fairly light and maneuverable although I could only load two sets of nails even though there was almost room for three. Another 1-1/2" longer ramp and I probably could. I picked up a drier and installed itDedicated to the nailer. I have found corrosion in other air tools from moisture in the compressed air especially in humid weather.

I've been giving it about ten drops of oil every time I use it. It isn't a production tool so my use is rarely over two hours at a time.

So far I'm pleased with the purchase although I saw it cheaper right after I bought it!

Black & Decker ASI300 Air Station Inflator - Electric Air Compressor

• Inflates lawnmower, bike, and vehicle tires, sports balls, and other items quickly and easily
• Space-saving, portable design
• EZ air dial for instant shut-off when correct air pressure has been reached
• Weighs 6.1 pounds; 2-year warranty
• Includes standard tire nozzle, needle inflator, and extension nozzle

I am pleased with this inflator so far. (I hedge a bit, given the reviews stating that the device has failed for other users. But that's what the warranty is for.) It is easy to use, effective, and convenient with its storage compartment for power cords and inflation hose. I especially like the automatic cutoff feature; I can turn it on and let it do its thing while I'm doing something else. I run my automobile tires at higher pressures than most (60 PSI), and it had no trouble with those. It takes a couple of minutes, of course, but that's to be expected -this is not a mechanic's air compressor, and I don't expect that level of performance. I haven't tried them on my higher pressure (90 PSI) bicycle tires yet.

Negatives that other reviewers have mentioned and my comments:

* Gauge readability: Yes, it's a little hard to discern small PSI increments on the gauge. But I never rely totally on any pump's or inflator's built-in gauge for my tires; I always verify with a good quality tire pressure gauge. The inflator's gauge and cut-off get me in the ballpark, and then I fine-tune using the tire pressure gauge. They are within 1 or 2 PSI of each other.

* AC power cord length: Not an issue. I likely would have to use an extension cord anyway. And the short power cord adds a bit to its portability -no fiddling with it or trying to store a long (and useless while traveling) power cord with the device as it sits in my trunk.

* Noise: No worse than any other inflator I've used.

* Small storage compartment for cords and hose: Not too much of a problem, though it might take a little practice to get them coiled up the right way. It's handy to have the compartment.

* Short inflation hose. No shorter than other inflators in this price range I've used. Plenty long enough to reach a valve stem at top dead center with the device on the ground next to the tire.

* Plastic connector that *might* break. I'll judge it if or when it actually breaks, not before.

* Having to cut the power switch off and then on again to run it after an automatic cutoff: Gimme a break, how big a deal is that??

Buy Black & Decker ASI300 Air Station Inflator - Electric Air Compressor Now

I have used it for about a week now. It is much better than the one I got from Walmart. The major issue I see is that the pressure gauge on this machine is rather small and it will be hard for you differentiate between 27psi versus 29psi without using an external gauge. My Toyota Camry calls for 29psi and my other car asks for 34psi front and 36psi rear. It was impossible for me to read 34 vs 36 psi on this machine's gauge.

Tip: To get the best out of this machine get a good external mechanical pressure gauge with a relief valve (you can get a decent one for under $10 at Walmart). Then set the dial on this machine to be slightly over (2-3 psi more) the pressure required (I set it to 30psi when filling my Camry which needs 29 psi). Fill the tires with air using the machine. Then use the external gauge to measure the pressure and release the air using its relief valve until the pressure is at the desired reading. Works like a charm for me.

Other than this, the machine is quite nice and with a 2 year warranty it is a good buy. Amazon's price was amongst the lowest I could find.

Read Best Reviews of Black & Decker ASI300 Air Station Inflator - Electric Air Compressor Here

Overall works pretty well.

Positives:

All hoses and wires and adaptors store inside the unit, for neatness.

built-in handle is nice

long 12V auto power cord

two-year warranty

Negatives:

When it stops automatically after inflating one item (such as a tire), it must be turned off and back on to inflate another item, or to increase pressure setting and continue filling.

the AC power cord is extremely short. Pretty much requires an extension cord.

the air hose is fairly short.

The noise it makes is quite loud, though not as loud as some I've heard.

fitting the cords and hose back into the storage compartment is not easy.

the valve adapter is plastic, not metal, and doesn't seem sturdy. It works so far, however.

Want Black & Decker ASI300 Air Station Inflator - Electric Air Compressor Discount?

Overall, I like this inflator. As is typical with about anything, it has strengths and weaknesses. The strengths:

Once set, I verified with a digital tire gauge that the built-in pressure gauge is accurate to