Campbell Hausfeld WS0990 115-Volt Stick Welder

• Great for small repairs and hobby welding
• Runs on standard 115V power
• Dual heat setting and thermal overload protection
• Versatile design welds mild and stainless steel from 18 ga. To 1/8 in.
• Durable metal welder with comfort fit handle

Naively, I purchased this product based on the price and the raving reviews it was getting. The "specifications" leave a lot to be desired. One review even says this product welds ¼" with no problem. I thought "what the heck" since it was only $106. Well let me tell you, this won't weld ¼", it won't even weld 1/8". I rated it a 3 because I did not test lighter gauge metals since that is not my need. It might work great on those, I just don't know. This review is basically for the misleading reviews Amazon has for this product.

Buy Campbell Hausfeld WS0990 115-Volt Stick Welder Now

being in home repair all my life i had never needed to weld until now. it was absolutely the best price i could find. it arrived a day before they said it would, ready to use right out of the box. it is simple to operate and pretty foolproof. i taught myself to use it in 5 minutes from the included instructions and have used it on many jobs since then including a few art projects just for fun. the ONLY problem was the mask is handheld. i only have two hands.

Read Best Reviews of Campbell Hausfeld WS0990 115-Volt Stick Welder Here

I bought this little welder to put together a set of custom built pedals for a home made racing cockpit. It did the job of tacking my pieces together!

Want Campbell Hausfeld WS0990 115-Volt Stick Welder Discount?

I didn't have expectations that this was going to be the most awesome welder I ever owned. I didn't plan to build giant robots and take over the world. I did however expect that it would be able to make an arc. It failed to do that.

When you flip the power switch you can hear it "Clunk" letting you know there is some juice, but there is no "on" light so if you wander off and leave it no one will know.

Clamp the lead to my piece of thin steel tubing, touch the stick to the joint. Nothing. Sand the spot where I am clamping too. Reclamp. Nothing.

Maybe my steel is not conductive enough. Grab some sheet steel clamp to that, just touch the stick to it to see that I get a spark. Nothing.

Swap sticks. Nothing.

I wouldn't recommend this to anyone. It sucks. It is Sunday so I don't know if i can return it. That won't change my rating but will make me less annoyed.

Save 31% Off

First the included stick are not for a new to welding person. I knew that so i was prepared, Find some E6013 rods and this welder just works. i found 1/16 worked great on low. and high was a waste. No popped breakers on low or high, i have 20 amp circuits.

MINI HVLP AIR PAINT SPRAY GUN Tools 4 Boat Car Detail

• Operation Pressure: 30 psi - Air consumption: 8 cfm
• Pattern width: 190mm (7.5") - Minimum Hose Size: 1/4"
• Air Inlet: 1/4"
• Nozzle Size: 1.0 mm
• 100 cc Plastic Cup Included!

I got this gun to replace my trusty the old type touch-up gun, it fell and broke the trigger. Being new, I hoped it would be better, but the was far from it. Putting the gun together, it felt good and "looked" nice. I ran some air through it and cleaned the cup and tip. I got set up and mixed a quart of PPG jet black. Once I loaded the gun, I noticed paint leaking out from behind the trigger somewhere. I activated the trigger a few times in hopes it woild seal. It got worse, now running out. So, I dumped the paint, cleaned up the gun, me, floor and bench. I took the trigger and needle out to see if there was a bad O-ring. There wasnt. The needle seal in this thing is a poor poor design. I adjusted it and even talked nice to it, but it would never seal. I have to say, cheaper is never better... Oh, and I lost around $60 worth of PPG paint too. Dont waist your time with this gun.

Buy MINI HVLP AIR PAINT SPRAY GUN Tools 4 Boat Car Detail Now

I havent used to many small spray guns but this one works great!! Alot easier to paint small areas that only need minor repair! Adjustments are easy to use as well! Got it at a very good price to...

Read Best Reviews of MINI HVLP AIR PAINT SPRAY GUN Tools 4 Boat Car Detail Here

It is a great price for a nice mini sprayer. Works well, easy to clean. I would recommend to a friend.

Steel Brass Constructed 110 Gallon Sandblast Cabinet w/ Built in Dust Collector

It works great, and for the price is a great buy. But you get what you pay for.

The only major problem I had with it was the leak in the doors. But easily fixed by drilling new holes for the hinges and moving the doors back about an inch or so. Then putting a little more foam where there was a gap (it looks like the door was bowed a little bit).

I also had a tiny washer get stuck in the nozzle and it just didn't want to work. I took the washer out and it worked fine. Not sure if the washer was from inside the nozzle or not, kind of seemed like it was. But something to think about if you have problems with it sucking up media.

Other than those two minor details, it works flawlessly. Great buy.

Large enough to put two car wheels in at the same time and have more than enough room to work on both of them.

I had ordered this for my shop to save time on cleaning small parts, it works great and is fairly sturdy! it arrived within a week of ordering it.. I use some Garnet Grit I found at TSC store and it works OKThe only thing that was sorta questionable was the Red Plunger thing, the instructions never addressed it, how ever it looked to fit in the dust collector, and it did it is used to shake dust from the filter, overall very pleased!

Buy Steel Brass Constructed 110 Gallon Sandblast Cabinet w/ Built in Dust Collector Now