DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer K

• Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
• Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
• Contact Trip Lock-Off allows trigger to be disabled when not in use
• Integrated LED lights for long life and durability;Top cap is impact resistant and easy to remove for troubleshooting

No, I am NOT a pro finish guy--former pro-painter guy. I have remodeled about half my house so far, so I would most likely just be a DIY guy. HOWEVER, my experience with interior painting on high-end, high-production tract home projects has made me expert in making the finished product look great no matter what (even though the popular phrase around the jobsite was "the painters will fix it").

Just picked the nailer up August 31st from H.D...

First impressions: This thing is freakin' heavy! I compared it to my Senco FramePro 702XP framing nailer (with 1 stick of 3 1/2 nails in it) and they weigh the same (about 8 pounds). My neighbor has a Senco AirFree cordless nailer, it feels like a toy in comparison to the DeWalt.

Pro's:

* Cordless! Don't have to drag out the air compressor.

* Cool headlights. Good for doing trim in darker areas.

* Shoots 16 gauge angled stick nails (Paslode nails were all I could find to fit at H.D.) Used for crown, casing, base and quarter-round shoe molding--made small, tight holes, no problems.

* Accurate electronic depth adjustment. 1-6 range, 6 setting will just countersink in 3/4 oak

* Bump-firing! Unlike Senco AirFree, you can set the DeWalt to single fire or bump. When on bump mode, it drives at a consistent depth. The motor spools up when you press the trigger, and then bam, bam, bam

* Good grip. Feels like typical DeWalt grip. Stays in you hand while sweaty, quality trigger feel.

* Spare battery. Good Dewalt charger, quality carrying case (with steel buckles instead of plastic)

Cons

* Porky. Not just heavy, but the head of the unit is kinda fat, it has a belt clip, which you have to use, because you can't park it in your bags. It does work OK with a Monster Hook, so no big whoop. It will also nail shoe molding just fine while upside-down.

* Yellow headlights. I know yellow is DeWalt's thing, but white would have been better.

* Price. $400.00 is a good chunk of cash.

Overall, great result for a first-time release. Absolutely SPANKS the Senco AirFree--then sends it to bed without dinner.

Buy DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer K Now

Just bought this tool in sept. and used it to frame several door jambs and casing. it works good. a little heavy, but a lot lighter than a compressor, hose etc. if you buy the angle gun the price of the nails are about 50% more than if you buy the other dewalt straight nailer. because at hd you can buy paslode nails for this angle gun or with the straight gun you can buy senco or porter cable nails. however the angle nailer is better for reaching into corners. As with most dewalt tools you have to use them for 15-30 days to make sure they do not fall apart or break down. but so far I recommend this gun. GUN UPDATE:>12-1-04: IT WORKS GREAT!. have done several jobs no compressors or hoses, entire house molding, casing and the gun works great. no hassels with hoses and watching out so nothing gets knocked over. I have used this gun now for 90 days and have had great success. good job dewalt.

Read Best Reviews of DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer K Here

This tool is solid and works as advertised. So it weighs 8.5 lbs... if you are going to be nailing over your head for hours straight then break out the air hose. I did the same when using my Paslode.

This tool replaced my Paslode Impulse Finish nailer. I've not looked back. Ample power and drives nails well with very predictable depth control.

Get the angled nailer, easier to place and nail in tighter spots. With the size of the gun, you'll need it.

If you are looking for the possible negatives...

Somewhat costly to purchase

It is heavy, but the tool compensates me for this with performance and convenience

I miss being able to sit the tool down on the front face like the Paslode. The Dewalt rolls over sideways if you try. This makes it difficult to set it down and retrieve from the floor or a ladder shelf. I glued rubber feet to the front, problem solved.

If doing production, long nails, hard wood... keep batteries ready to go. I find I can run 3 clips of 2 1/2" if attaching solid oak face trim. For regular use and 1 1/2" nails I get 5 to 6 clips through it.

Don't use the belt clip unless you are trying to remove your pants.

High profile theft item, bright yellow, easy to lay about, high dollar value... watch it close or you'll be buying a second one real soon. (Soap Box Thieves should have a finger removed for each item they steal until they learn or can't pick anything up anymore. Seems fair, 10 chances and all.)

Rather large for tight spots, but amazingly it can get places I would have said it couldn't.

Now, for those that own a selection of 18V tools, consider the kit purchase comes with two batteries... buying two batteries is $100. (you get a 3rd if you buy soon) For me, that's a $100 credit toward the purchase of the gun.

Buy it, enjoy it.

Want DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer K Discount?

First, I'll start by saying that I already owned a few DeWalt 18v products, and I have been very pleased with them. I was so tired of carrying around a 75 lb compressor and hose for mid-size trim jobs that I started looking cordless. I'm sure the Passlode is a nice tool, but I already own 18v DeWalt batteries, and I didn't want to deal with the Passlode fuel cells and batteries.

Now, for the performance this does just as good a job as my DeWalt and PC pneumatic finish nailers. It can sink nails through 1x oak baseboard, through a sheet of plywood and into a stud, and do in with excellent depth consistency. It's not going to replace my pneumatics on a large job, as one battery lasts about 4 clips of nails. It was great for putting up chair rail in the last basement I finished, but if I were trimming an entire house, it would be time to break out the compressor and hoses.

A bonus I find myself using this for my woodworking projects as well. I can set the depth to leave the nail proud of the surface, and tack items together for gluing. This lets me setup my work without struggling to hold the work and the clamps. Fire a few nails, set down the work and then get the clamps.

I have only two small complaints:

One is battery life. It may not be possible to improve it, given all that this gun has to do (I wouldn't give up the work lights for battery life!), so it may be a reasonable compromise, but four clips of nails is not a whole lot. Plan on needing 3 batteries for continuous use.

Second is price. I think the price of the gun is a little steep. My wife gave it to me as a gift, so I can't complain too much I'd been eyeing it for some time, but couldn't justify the price.

I don't rate many things with five stars, as there is always room for improvement. Four stars, however, is a rating to me that means I'd spend my own money on it again.

UPDATE:

I replaced my batteries with new XRP's, replacing some old XR+'s. I now rate this as five stars! It's not the gun eating batteries, mine were worn out. I did a 2000 sq ft house on 2 batteries. Wow.

Save 13% Off

I just bought this about 2 weeks ago, so I can't attest to its durability, but this is the best investment I have made in ages. I did drop from a ladder onto concrete, with no problems. I used this to hang a prehung exterior door and put down some shoe molding last week and it was great. I assumed that I would have to wait for it to charge a spring or something before I could shoot a nail, but it's ready to go as soon as you pick it up. When you pick it up and just feather the trigger, two little work lights come on and the motor spins up and it will shoot nails as fast as you pull the trigger. As with all nail guns, it won't shoot until you press the shoe against the wood. It also has a bump-firing mode where you can hold the trigger in and it will shoot a nail every time you bump it. It uses the Paslode 22 deg. nails from 1¼ -2½ . The 2 1/2" nails are great for large trim. I used them to tie doorjambs to the studs. Seems to shoot a zillion nails on a single battery. Much quieter than my air nailers. Nail depth control is the best I have seen. The case has storage room for 4 boxes of nails. The body is big, but it's very light. Get the angled model, not the straight one; they're the same price.

17.5 CFM 145 PSI TWIN CYLINDER AIR COMPRESSOR PUMP

• 5 to 5.5 HP motor
• Rated pressure: 145 PSI
• Pump speed: 655 RPM to 1050 RPM

Wasn't aware of how much TROUBLE I'd have hooking up the pump to our shop compressor.

Metric flare fittings OUT and made a major project out of trying to get the thing plumbed to our unit.

Left a phone message with the vendor (in So Cal) and never had so much as a return effort.

Would have appreciated a reply even if it was to indicate that we were "on our own".

Finally managed to get it "plugged in" after two weeks of parts shopping, $120 in fittings & pipe, and days of R&D and in house fabrication.

Just got it started today. Seems to be working but makes some knocking noises.

Guess we'll have to wait and see.

Wouldn't recommend it unless its a direct replacement of the same unit or similar with the same fittings.

Buy 17.5 CFM 145 PSI TWIN CYLINDER AIR COMPRESSOR PUMP Now

Not sure who gave it 5 stars, must have been someone from there company. Metric flare output is impossible to find a fitting for. I ended up re-threading it. Once I got it going, it produced about 3 cfm. When I contacted the company they said that was not possible and hung up on me :)

Read Best Reviews of 17.5 CFM 145 PSI TWIN CYLINDER AIR COMPRESSOR PUMP Here

a ++++++ +++ ++ + +++ ++ +++++ + ++ +++ ++ ++ ++ + ++ ++ + + 1

DEWALT DAP14100 100-Foot, 1/4-Inch Diameter, Polyurethane Air Hose with 1/4-Inch Npt Male Fittings

• Weighs up to 50 percent less than traditional rubber air hose
• Maintains flexibility in extreme climates (-40 to 165 degrees Fahrenheit)
• Allows users to easily coil and uncoil their hose while at the same time avoiding excessive kinking
• Built with reinforced braided polyurethane, providing users with best in-class jobsite durability
• Built with a non-marring outer surface allowing users to avoid scuffing up finished surfaces

Works as advertised, no problem. If you need it right away, you can drop by your local Home store to get it at a better price.

Buy DEWALT DAP14100 100-Foot, 1/4-Inch Diameter, Polyurethane Air Hose with 1/4-Inch Npt Male Fittings Now

Light weight, easy to coil and un-coil, hose is very flexible. I am surprised that it has the air supply to drive my many tools that require large amounts of air, being a 100 foot long and only 1/4" in diameter.

Stanley Bostitch CPACK300 3-Tool and Compressor Combo Kit

• CAP2000P-OF oil free air compressor: 2.8 CFM at 90 PSI with 150 max, 6-gallon reserve tank, impact-resistant shroud to protect gauges
• SB-1850BN Brad nailer: adjustable depth guide, tool-free adjustable exhaust and no mar tip; drives 18-gauge brads 5/8-inch to 2 inches in length
• SB-150SX finish stapler featuring bottom-load magazine, tool-free adjustable exhaust and no mar tip; drives 18-gauge 7/32-inch narrow crown finish staples
• SB-1664FN finish nailer features quick-release nose door, adjustable depth guide, tool-free adjustable exhaust and no mar tip; drives 16-gauge straight finish nails
• Accessories include: 1/4-inch by 40-feet PVC air hose with fittings; 1,000 1-1/4-inch brads; 1,000 1-Inch staples; 1,000 finish nails, tool lubricant and canvas carrying case

I would prefer to give this product 4.5 stars instead of 5

The CPACK300 has been great for my recent remodelling jobs. Compared to the cp3, the kit remains the same except for the change in compressor. From my experience with both kits, the CPack300 has a far more ergonomic & jobsite friendly design. As other have pointed out for the CP3, the compressor handle was poorly designed & weight and size has been reduced to produce the cpack300 compressor. It's a tad more powerful at 40 psi & so much easier to lug around. Guages are protected by a rubber rims & the compressor is as compact as can be, the design is queter than the previous design & queter that similar porter cable designs.(it'll still wake you up in the middle of the night if you keep it plugged in next to you )

All guns require a bit of oil, but work flawlessly. Bostich makes great products made for a lifetime & i'm sure this is no different. The guns have never jammed, and work fine with 3rd party nails, or brads... after about 2000 nails, i have yet to have a jam. The design is great, the guns fire comparatively quiet & have the dual safety feature.

The no mar tips are of hard plastic & in my opinion inferrior to the porter cable guns i've used prior to purchasing this combo. I do appreciate the comprenhsive kit that is included. basically you get a quality stanley tool bag, about $25 worth of nails, staples, and brads.

The only deduction i'd give is to the cheap pvc air hose included, i guess this is true with all pvc produces... it maintains its rigitity & it maye be tough going around corners, causing the user to tug it along. Also it doesn't wind as well as rubber hoses, I'm sure i'll be upgrading the hose once it shows its age.

The whole kit is probably 50 lbs total & take a very small footprint when organize.

So far the whole kit is fantastic for the price i paid, about $270 after taxes. It's on par with more expensive kits & it give you alot for the money, including an impressive 7 yr warranty on the guns.

I've laid down about 1500 square ft of hardwood between this bostich & a porter cable combo that i borrowed off a friend. nailed in 150 ft of molding & fixed all sort of problems through out my home. I'd recommend this kit to anyone over the CP3 kit for anyone looking for a dependable nailer/compressor combo. CP3 kit has the inferior compressor

Buy Stanley Bostitch CPACK300 3-Tool and Compressor Combo Kit Now

I've been an owner of this combo for three years now. I bought it from Lowes for some light duty around the house fix ups. Tasks like pump car tires, patching up little pieces here and there. I did use it to built a window seat last year. The unit at first looked solid. The 3 tools that came with the combo is also well built. Boy, when it worked, I love the feeling of pulling the trigger rather than pounding nails all day long. I took very good care of this tool. Always clean it up and drop the pressure to about 20psi before storing it away after each use. And I never left it outside or left it fully pressurized overnight.

Last week I started a new project to install some stair treads. Took it out the garage and adjusted the pressure to 90psi for the brad nailer. The tool worked for a few shots, then suddenly, the nailer just went silent. Checked the pressure, and found that the tank pressure is still at 140 psi, but the outlet pressure just went to zero. I checked the compressor, and found that the pressure regulator knob has stripped. Apparently the threading on the knob is made of plastic. So even with very light usage, a failure on this part is bound to happen.

Then last weekend, I went to both Lowes and HD in my area shopping for another compressor in order to finish my project. Out of curiosity, I checked the Bostitch combos that was on display. Out of the two displays Lowes had, both had stipped pressure knob.

So to the potential buyers out there, beware of this flawed tool. A $300 compressor that uses a cheap plastic pressure regulator that's guaranteed to strip. So do your homework before you buy. Go to Lowes or Homedepot, and check out the floor displays that they have. Chances are, you will see that the plastic knob (the red knob in the front) on the floor model are all stipped, just from people looking at it and turning it a few times.

Read Best Reviews of Stanley Bostitch CPACK300 3-Tool and Compressor Combo Kit Here

I must say, conceptually, this kit is pretty handy to have around the house for the average DIY enthusiast. However, I've not had much luck with the compressor being there for me when I need it. In summary, this is mostly because of cheap parts and craftsmanship, which I shall elaborate on. Bottom line, would I buy again...absolutely not.

My opinions and observations:

1. Nailers: decent. I have cracked one of the end-caps where the air nipple screws in as they are made from cheap pot metal. No biggie, no surprise there, and probably my fault. I bought a new part online and replaced the defective part. My opinion is that the 3 nailers are the strong link in this chain.

2. Hose and accessories: worthless. Again, worthless. Do your self a favor and buy a quality hose. This one is cheap, stiff, and leaky.

3. Compressor: Eeesh...where do I start? Number one, this little sucker is LOUD. I've owned other compressors and wow. Buy some earplugs. After a year or so of VERY light use, I noticed leaking air from the quick disconnect. Then, the plastic knob on the regulator stripped, rendering the unit useless. It was all downhill from there. I purchased a new regulator, disassembled the compressor and replaced the valve (no easy walk in the park). Then I noticed the main pressure gauge is totally gone (as in broke). Then I started to notice the compressor wouldn't hold pressure, loosing 10lbs per 1-2 minutes. Found the culprit! The cheap brass tank coupling going into the regulator. Off comes the shroud again to fix it. Tried tightening, which slowed the leak, but it's simply not a good design. Thought about replacing, but honestly I don't want to invest any more money in repairs. I'll suck it up and live with it. Second time I had the shroud removed, I took note that the motor electrical feed is zip-tied in place at the very very cheap and loose quick connect plug. WOW! The internals look like a second grade science fair project. Don't expect quality here.

I LOVE the semi-portability of this compressor, and the nailers included in the kit are decent. But the cheaply made, low quality design of the compressor is definitely the Achilles Heel of this kit. Don't expect to pass it down as an heirloom. I'm just grateful that my income doesn't rely on this tool. Again, I've had all of these problems under VERY light use, i.e. inflating car tires, blowing up pool toys for the kids, occasional fastening jobs, etc. Of course, your milage may vary.

Want Stanley Bostitch CPACK300 3-Tool and Compressor Combo Kit Discount?

I bought this compressor combo at Lowe's 3 weeks ago. Went home to play with it and discovered the stapler didn't work. Took it back to lowe's and they replaced it. Used it today for the first real project and the cheap plastic pressure controller stripped out and failed. The part cost me $14 and the shipping is $16! LOL!!!

Save 22% Off

I purchased this combo pack after reading every review on Amazon and several other sites for this package and several others. I could not be happier with my purchase!! I needed a kit to aid in the renovation of my new (to me) home. So far I have used the finish and brad nailers to install base board, shoe, and door casing, install a solid pine pre-hung door, and build a couple planters for my wife. These tools are definitely up for many jobs around the house. The finish nailer is plenty powerful and always buries the nail. The brad nailer needed a little adjusting to get the nails to fully seat themselves below the surface of the wood, but it is now functioning great as well. I haven't used the stapler yet, but I'm sure it'll work just like the others. The compressor is a little loud, but I expected that based on other reviews. Once pressurized it will sink brads for a long time and will probably bury 20-30 finish nails before it needs to pressurize again. Don't pass up this combo kit, it will meet your expectations!

Camco 36153 RV Brass Blow Out Plug

• Helps clear the water lines in your RV during winterization and dewinterization
• Built with brass
• Screws into RV city water inlet
• Heavy duty
• Easy to use

This one is much better than the plastic plugs. And the concept of blowing out water instead of displacing it with red pop is sound. The only place that antifreeze must be used is in the water pump and in the P-traps (sinks and shower).

Buy Camco 36153 RV Brass Blow Out Plug Now

This was the first time I winterized my trailer. This product was easy to use after I removed the valve stem from inside the blow out plug. With the valve stem in the plug the air pressure was too low, once I removed it it worked like a charm.

Read Best Reviews of Camco 36153 RV Brass Blow Out Plug Here

I bought this version over the plastic version because you can connect any type of air compressor to it. The adapter is the same kind as used in car and bicycle tires.

I used it last weekend to clear the water lines of my travel trailer and it worked as advertized.

I initially was going to just use a bicycle pump to push the water out, but I managed to borrow an air compressor at the last minute. I blew the lines for about 30 minutes and then pumped in some RV antifreeze as recommended by my trailer manufacturer.

Even though you'll only use this adapter once a year, I would recommend this over the plastic version because it should last a lifetime.

Want Camco 36153 RV Brass Blow Out Plug Discount?

I used this tool to winterize our travel trailer. Simply screw it on to your water hook-up, and then attach your standard air adaptor to your compressor hose and presto you're in business.

The tip is flexible, but secure. That is, after connecting your air hose to this plug, you can tip the hose in any of 360-degress, and it will flex. This is great, because in colder weather a more rigid adaptor might break.

I would recommend this plug for anyone that wants to winterize their RV, and I would purchase it again.

Save 29% Off

Plug has a tiny hole that is too restrictive to allow enough air volume through to do an adequate job. Hole may be small to attempt "reduce" pressure but that is not a satisfactory way to reduce pressure anyway. Need to reduce pressure on compressor regulator to avoid blowing out lines in RV Make you own adapter using a piece of garden hose, and the appropriate adapters to do a satisfactory job of removing all water from you RV lines for winter storage.

Winterize Sprinkler Systems and Outdoor Faucets Blow Out Adapter: Air Compressor to Female Garden Ho

• Adaptor to Winterize Sprinkler Systems and Outdoor Faucets
• Pre-assembled length: 10 inches (approximate). Pressure rating: 250 psi with 4:1 safety factor.
• 100% outdoor rated, virtually indestructible, impervious to water and oil
• All metal parts are brass.Hose is 3/8" Inner Diameter Goodyear Insta-Grip, made in USA
• Assembled in Andover, Kansas, USA.Includes printed instructions.

This little device works exactly as advertised and expected. It's quick, slick and simple, allowing you to hook your air compressor to your sprinkler system in seconds. Components are high quality. Price may be a little on the high side, but it's nice to get something that you know will last a lifetime and is high quality all-around.

Buy Winterize Sprinkler Systems and Outdoor Faucets Blow Out Adapter: Air Compressor to Female Garden Ho Now

Worked as advertised. Kept me from having to design and build myself one. Delivered on time. Well made construction. Would purchase again, but doubt I will have to as this one will last.

Read Best Reviews of Winterize Sprinkler Systems and Outdoor Faucets Blow Out Adapter: Air Compressor to Female Garden Ho Here

I use this to blow the pipes on my outdoor irrigation system. Very solidly built and highly recommended. Worked great on my system.

Want Winterize Sprinkler Systems and Outdoor Faucets Blow Out Adapter: Air Compressor to Female Garden Ho Discount?

I used my pancake air compressor at 80psi and did one station at a time. This worked VERY well and I was very happy to have found this product so that I don't have to keep replacing my valves that bust open with the cold weather. The first 8 years I lived in my house I had manual, ball-valve valves and I didn't have any freeze issues. But once I put in an automated system, the last 2 years I've had to replace pieces of the manifold and/or valve(s) because of the freezing temps. This is a life saver!

I have a beach house with exposed pipes and I needed to blow them out for the winter. I thought this type of attachment would easily be available at Home Depot, but they had nothing like it and I would've needed to create my own by mixing multiple attachments. I bought this instead and have already used it several times to clear the pipes after day trips and it's worked flawlessly each time.

Steel Brass Constructed 110 Gallon Sandblast Cabinet w/ Built in Dust Collector

It works great, and for the price is a great buy. But you get what you pay for.

The only major problem I had with it was the leak in the doors. But easily fixed by drilling new holes for the hinges and moving the doors back about an inch or so. Then putting a little more foam where there was a gap (it looks like the door was bowed a little bit).

I also had a tiny washer get stuck in the nozzle and it just didn't want to work. I took the washer out and it worked fine. Not sure if the washer was from inside the nozzle or not, kind of seemed like it was. But something to think about if you have problems with it sucking up media.

Other than those two minor details, it works flawlessly. Great buy.

Large enough to put two car wheels in at the same time and have more than enough room to work on both of them.

I had ordered this for my shop to save time on cleaning small parts, it works great and is fairly sturdy! it arrived within a week of ordering it.. I use some Garnet Grit I found at TSC store and it works OKThe only thing that was sorta questionable was the Red Plunger thing, the instructions never addressed it, how ever it looked to fit in the dust collector, and it did it is used to shake dust from the filter, overall very pleased!

Buy Steel Brass Constructed 110 Gallon Sandblast Cabinet w/ Built in Dust Collector Now

Amico Air Compressor 1 Port Pressure Switch Valve AC 300V 20A

• Type: 1 Port, Normally Closed(NC); Max. Voltage: AC 300V; Current: 20A; Pressure: 175PSI, 12 Bar
• Joint Thread Hole Dia.: 11.8mm/ 0.46"; Inlet Hole Dia.(Each): 13mm/ 0.51"
• Inlet Thread Dia.: 6mm/ 0.23"; Total Size: 12.5 x 8 x 5cm/ 4.9" x 3.1" x 2" (L*W*T)
• Button Diameter: 2cm/ 0.8"; Material: Metal, Plastic; Main Color: Black, Red
• Weight: 281g; Package Content: 1 x Air Compressor Pressure Switch

seems to work like its intended to.fits like the one on my compressor that went bad.not quite the same voltage as the origional part that was on the compressor origionally.

n

Poly IND Fit Air Hose

Yes, its light and flexible as others have suggested. These are great things to have in an air hose. The fact that its hard to kink is somewhat irrelevant because under pressure, I've never experienced a kink in my regular rubber air hose.

This hose just continues to annoy me though. The big problem is that it wont lay flat on the floor. It will lay twisted and semi-coiled no matter how many times you unwind or untangle it during use. The coils on the floor create 6 to 8 inch "bridges" of hose that you will inevitably trip over, become tangled in, and then curse like a sailor. I cant count how many times the hose has literally wrapped around my foot by accident. I'd bet that 25% of those instances caused me to mis-step or flat out trip and stumble. My good old rubber hose lays flat on the floor and has never caused me an ounce of disgust. And the rubber hose is much easier to re-coil for storage.

This is not an issue limited only to these Hitachi hoses. I've yet to find a polyurethane air hose that lays flat. You see, the trade off to the "lightness" of the hose is that it causes it to lay at its own will (seeming to disregard gravity). I'm not even sure you'll understand the point of my review. If not, go ahead and buy one. I think my comments will be clear within a matter of minutes.

Regretably, I bought three of these hoses before I realized what a pain in the rear they are.

We just ordered two more of these from Amazon (they are significantly cheaper at the moment than the local stores). These are the favorites among our construction company due to the light weight, durability, and the fact that they really don't kink.

For those of you who are just working around the house, any old hose will do. But for those of you in the professional arena, the lighter weight will be a blessing in the 8th hour when you're trying to get those walls up before dark so that you can get paid in the next draw. We stick with the 100 lenght because we are building hotels and such, besides going from the 50 to the 100 is only a few dollars difference and is worth it if it keeps you moving.

Highly recommended

Buy Poly IND Fit Air Hose Now

This is a great hose and an excellent price. I am a carpenter and framer and use my nail gun all day long, every day. I bought this hose about 6 months ago, it is very lite-wieght and flexible and does not have a single shortcoming. Stretch the hose out in the sun when you first get it and wrap it up loosely each nite to keep it from kinking up. Also, you might want to go ahead and order some universal attachments, as the hose comes with 3/8ths only.

EDIT: Been using this hose every day for more than a year. In that time it has not had a single leak and has performed flawlessly, excellent value.

Read Best Reviews of Poly IND Fit Air Hose Here

Let's you get the compressor away from the house and are tough as nails. Very little wear on these with three months of hard use. A little side note: these are clear and lets you know if your building up condensation in your tank and might be getting a little rust.

Want Poly IND Fit Air Hose Discount?

Im a residential building contractor and these airlines are the best ive used. I really like them doing framing and trim cause the cold weather doesnt affect these airlines. I have noticed their very durable as well cause my guys dont bother climbing and hand off the nail gun they will lower it down to the person below using the airline and the fittings hold up great. I wont use a different airline thank you hitachi for designing such a great item for guys that use them every day and they keep going. I hope my review could help in choosing a airline you wont be disappointed.