1/2 HP Ultra Quiet & Oil-Free Air Compressor Pump/Motor

• 1/2 Hp Air Compressor Pump/Motor
• 1.90 CFM @ 40 PSI & 1.10 CFM @ 90 PSI - Max 120 PSI
• Ultra Quiet - Only 56 Decibels
• Low Amp Draw - 4.5 Amps
• Oil-Free - No Maintenance - 3000 hour lifecycle

I wanted to write this review especially because of the lack of reviews. I have been using this compressor for air assist on a Laser Engraver. This compressor holds 50psi on a short(5') run of 1/4" line. This compressor is indeed quiet, having a low sort of sound that is far more appealing than a metal on metal clickety clack sort of sound. I have it sitting on a folded towel to further reduce vibration. It comes shipped without a plug end(user supplied) and without the capacitor wired or mounted. I built a capacitor mount for mine, but it is a bit annoying to have it flopping around next to the compressor. In an effort to extort more life out of compressor, I have a fan positioned towards the compressor if it has to run for an extended period of time. Overall good build, if it does reach the claimed 3000 hours I would consider it a great value.

Save 37% Off

Campbell Hausfeld 3/8-Inch to 1-1/4-Inch 18-Gauge Narrow Crown Air Powered Stapler: Model CHN10399

• 3/8- to 1-1/4-inch 18-gauge narrow crown stapler1/4" male industrial plug (1/4" NPT)
• Adjustable depth guide; quick-release nose door for fast jam clearing
• Non-marring tip will not dent the work surface. Adjustable exhaust
• Includes 1000 1-inch finishing staples, male plug, 2 hex wrenches, oil, carry case
• 3-year warranty

Questionable quality. I've had the gun just over a month and found it easy to use, lightweight, nice balance. I was fairly impressed. Then it just quit working, I'm guessing a seal ruptured somewhere inside b/c it just leaks instead of firing.

If I could get hold of someone at customer service I would find out what is wrong for sure, but they don't answer the phone, even during their limited office hours, and seemingly don't respond to their email. I'm sure it's still under warranty, but probably won't be by the time I finally get hold of someone.

UPDATE:

The leak was apparently the result of a seal getting dry on the shelf and coming unseated. It was a quick DIY fix. Since then, I've been using it regularly without any problems or complaints. I'd change the rating to a 4* if I could.

Buy Campbell Hausfeld 3/8-Inch to 1-1/4-Inch 18-Gauge Narrow Crown Air Powered Stapler: Model CHN10399 Now

I wanted a cheap stapler that works well enough for my needs (occasional use). This really fits the bill. I have other Campbell Hausfeld air nailers and they all work fine.

Read Best Reviews of Campbell Hausfeld 3/8-Inch to 1-1/4-Inch 18-Gauge Narrow Crown Air Powered Stapler: Model CHN10399 Here

This Little beauty is way more than I expected. I've only had it a short time but it is seemingly well made, performs very well and has features like the depth adjustment for the amount of penetration into the wood, which allows for proper use on both soft and hardwoods, and a very ergonomic soft grip handle. I highly recommend it. I don't think that, for the price, it can be beat.

Want Campbell Hausfeld 3/8-Inch to 1-1/4-Inch 18-Gauge Narrow Crown Air Powered Stapler: Model CHN10399 Discount?

This gun works great with the little compressor that I bought my husband last father's day. He used it to put hex netting up on our newly built fence, and we love it.

Save 38% Off

Campbell Hausfeld CHN10399AV 3/8-Inch to 1-1/4-Inch 18 Gauge Narrow Crown StaplerExcellent product! Performs very reliably jams infrequently to not-at-all. Would recommend this stapler on a par with any of the more "popular" brands.

AAA 4344AAA 3-LED Rechargeable Flashlight

• Has 3 ultra bright LED bulbs for maximum brightness
• Initial 6 hour operating time right out of the box
• Only 60 seconds of hand cranking gives 30 minutes of operating time
• Never needs batteries
• Perfect item for the house or for the car

I got them at a rock bottom price and included them as stocking stuffers. The kids love them and they actually illuminate a good amount of light for a good amount of time.

Buy AAA 4344AAA 3-LED Rechargeable Flashlight Now

Requires an absolutely non-tiring arm to get any light. After you crank a while & finally get the light, it doesn't seem like you can keep the light unless you continue to constantly crank it. I'd rather have batteries while I can.

Ingersoll Rand F35121-400-VS 1/4-Inch Air Line Filter, Black

• 1/4-Inch NPT
• Standard Filter - 5 Microns
• Manual drain
• 0.5-Ounce polycarbonate bowl with guard
• 49 CFM

I bought this to keep moisture out of the R37121-600-VS 1/4" regulator on my 30 gallon automotive compressor. I use the compressor to run an airbrush. So, the compressor only cycles a few times a day, but the unit is pressurized all day long. Therefore, I like components to hold pressure Leaking air is a bother. This filter holds pressure quite well with little noticeable loss after a day.

The filter seems carefully designed and well made. It is light-weight, but it does not look or feel cheap. I think it will last. The housing is plastic with aluminum internal components. It has a clever, sliding detente to release the bowl. Like other manual drain filter units, there is a pin at the bottom that can be pressed to release air and water while the compressor is pressurized. When the compressor is depressurized, you can remove the bowl.

This filter is cost effective, holds pressure, and works well. I recommend it.

Buy Ingersoll Rand F35121-400-VS 1/4-Inch Air Line Filter, Black Now

When I first received this filter, the o-ring for the canister-to-housing seal was twisted and pinched, causing the filter to leak considerably. With a bit of fuss, I was able to re-seat the o-ring, and get it to hold pressure. You also have to be careful to wiggle the drain valve a bit after draining the water to get it seal tightly. Another gripe is that it doesn't come with a wall-mount bracket, so I built one myself (see attached picture).

Overall, it's functional, extracts moisture from the air line, and is easy to drain. It does leak a tiny bit, causing the air compressor to come on approx 3-4 times per day for a few seconds when not in use, but that's bearable.

Read Best Reviews of Ingersoll Rand F35121-400-VS 1/4-Inch Air Line Filter, Black Here

I was a little skeptical about buying such an inexpensive filter for my air system a few months ago, but I have to say that it has worked very well, and I'm very pleased. You can't go wrong for the money, and IR is well established in the industry. Never had a minutes problem with any of their compressors through the years.

Want Ingersoll Rand F35121-400-VS 1/4-Inch Air Line Filter, Black Discount?

I gave this to my dad and he hooked it up to his air system in the garage. It was only $15 and provides a lot of features you don't get with those cheap $8-10 filters in the big box stores. I think this it well-made and will last a long time. It has a cast aluminum head with the inlet-outlet and the filter box is removable. I think you should be able to buy replacement parts since the filter comes out and there are part numbers on some of it but I am not sure. I would recommend this for anyone needing a good filter or water seperater.

Also, regarding the other reviews about a mount, you can get a double-side threaded connector and screw it directly to the pump or to a hose-reel. A mount is not needed unless your set-up does not provide a few inches of clearance to connect it like I discribed.

Once these are installed CORRECTLY, they work well!

First off... they are small. Don't expect something 12" tall, they are very small in size.

Second... they are NOT supposed to be installed near the compressor itself. For a filter to work properly, the air has to be cool as it enters the filter. If near the compressor, the air is hot and it will not separate the water. MAKE SURE to mount far from the compressor, and near the tool or end of hose.

Third... it's always best to use hard line up to the filter, from the compressor. Air Hose, is not the answer. Make sure to use the proper hard line (pipe) to the filter for it to be most efficient.

Porter-Cable C2004-WK 4 gallon Oil-Free Pancake Compressor with 25-Feet PU Hose and Fittings

• 165 psi max pressure, 4 gallon tank for longer tool runtimes in a more compact, lighter design
• Oil-free pump for no oil spills/contamination and maintenance-free operation
• Low Amp 120V motor starts easily in cold weather or with extension cord
• Only 29 lbs for easy portability
• 75.5 dBA (per ISO3744) for a quieter work environment

THE PHOTO ON AMAZON IS NOT THE C2004-WK COMPRESSOR. That's a photo of a C2002-WK compressor with the 13-piece accessory pack. This unit comes with ONLY a hose, as noted in the product description, and does not include the accessory tools shown in the picture. Just know what you're getting.

We use finish nailers, brad nailers and staplers and the technical specs for this compressor are a good fit. We've owned a 6-gallon Porter-Cable C2002-WK for a couple of years, use it daily, and are happy with it, but convinced ourselves that a second compressor would let us work at opposite ends of the house without trailing hoses all over Creation. Now we can have two guns attached to each compressor and it should speed everything up.

The 6-gallon C2002-WK is on sale for 25% less than this 4-gallon C2004-WK at the moment, and that's makes the 6-gallon unit a much better deal, but we decided it was a Good Idea to add a more quiet compressor and decided to spend the extra money.

Ordered from Amazon, this arrived a day early and in perfect condition. In fact, in three years, this was the first package UPS delivered that did not arrive mangled or crushed. That's good, because it was shipped in the factory box with no additional packaging or protection, and the factory boxes are designed to protect the contents for pallet-load shipments, not local deliveries.

The 4-gallon C2004-WK is slightly lighter but much easier to carry around than the 6-gallon C2002-WK. It seems to be quite a bit more quiet than the C2002, but the 75 decibels P-C advertises is not "normal-conversation-in-the-same-room" quiet by any measure. Wear ear protection.

I don't think the in-box air hose is going to last a long time, but it's decent and the fittings don't leak, and including a hose allows any first-timer to get going right away.

The pro's are:

(1) Size. It's a slightly smaller diameter than the 6-gallon C2002-WK.

(2) Noise. Subjectively, it probably is 1/3 less loud than the C2002-WK, as claimed although I don't really understand the noise complaints about any hand-carry compressor.

(3) "Lugability". On a bathroom scale, it is only around 6 pounds lighter than our larger C2002, but the weight is better balanced, and it feels 10-pounds lighter when you carry it.

(4) Fittings. Has a ball valve tank drain.

(5) Layout. Anyone who has used a 6-gallon Porter-Cable model will have no problem with this 4-gallon model. The safety valve is relocated where it is much less likely to get banged-about but it is still easy to reach for pre-start testing.

(6) Solid. The label claims "Pro" and for the most part it looks and feels well-built and solid. It's new and only time will tell, but if it lasts as long and works as hard as our 6-gallon unit, it will be a great addition. If you have to pay extra to get this, it should at least feel durable, and this does.

The con's are:

(1) Information. You can't find it or any information about it on the Delta/Porter Cable website. Come on, guys, it's not that new.

(2) Price. There's absolutely no reason this should cost 25% more than the 6-gallon C2002-WK.

(3) Weight. Although easier to carry, it's not much lighter than the 6-gallon unit, and I still wouldn't want to carry either of them up a ladder. It's too much weight to be overhead anyway.

(4) Fittings. I don't remember the factory hose connectors on the 6-gallon unit we replaced them early on but the fittings on this don't seem as crisp or as well manufactured as they could be. They don't leak they aren't crappy there's just a slight bit more "slop" in the sliding locks than I like.

(5) Plastics. A lot of plastics. It's the same amount as is used on the 6-gallon C2002, so Porter-Cable doesn't seem to be adding plastic to cut costs, and the plastic shrouds and handles on the older 6-gallon unit haven't failed or been a problem... But I'd sure like the carrying handles to be plastic laminated around steel. When I first grab either of them, I don't yank them around, just in case.

Why 4-stars?

(a) Weight. It could have been still lighter.

(b) Support. Online information is not yet available.

(c) Price. There's no reason for this to cost more than the 6-gallon C2002 that we can see. It's not 25% better; but the price of these should come down after the novelty wears off.

(d) Item Description. The product photo on Amazon (and most other retailers, too) is wrong. We knew it was a C2002-WK in the photo when we ordered it, and read that it didn't include all those accessories, but not everyone will.

It's still new around here, and we'll update this as we go along.

Porter-Cable makes reliable and durable small compressors at a tolerable price-point. Overall, I'd recommend this for anyone who must use a small compressor frequently more than once a week. But right now, the 6-gallon C2002-WK gives a much better bang-for-the-buck for anyone who only needs a small compressor every-so-often.

ADDED ON 3/4/2011: We used this all day yesterday with the short polyurethane hose it came with. I wouldn't want the hose on a jobsite, but actually, it's surprisingly good around the shop or around the house. It lies flat and coils neatly for storage.

It's only real shortcoming is the 25-foot length. Otherwise, we were surprised that it was better than expected.

Buy Porter-Cable C2004-WK 4 gallon Oil-Free Pancake Compressor with 25-Feet PU Hose and Fittings Now

at first it leaked when I took it out the box I fix the leak then on the job site after I turned it on the regulator was broke the was spring missing . I don't know if this damage happen in transit but remanufactured products and not a good bye

Makita Replacement Bulbs 9.6 Volt, Model# 192546-1

• For 9.6V, 4-position pivoting-head flashlights
• 2 bulbs per package
• Model 192546-1

These bulbs are designed for a 9.6V Makita Flashlight.

I have had my Makita Flashlight ever since 1989 and it is STILL going strong.

Thanks to Amazon, this bulb is still available. The bulbs were also packaged very well and delivery was FAST! That is the reason why Amazon has become my favorite #1 resource for all online shopping!

THANK YOU for making this product available!

Buy Makita Replacement Bulbs 9.6 Volt, Model# 192546-1 Now

Exactly what we needed for flashlight. Most bulbs were not bright enough. This one is exactly what came with the makita flashlight.

Read Best Reviews of Makita Replacement Bulbs 9.6 Volt, Model# 192546-1 Here

My old 9.6 volt makita light is now working! Comes in Makita packaging. Original replacment part. hard to get these bulbs locally.

Want Makita Replacement Bulbs 9.6 Volt, Model# 192546-1 Discount?

Great quality!!! In OEM packaging!!!! Fast Shipping!!!!Buy multiple items because it is a good deal and they are not that easy to find localaly