Milton S150 Lever Blo Gun Safety

• LEVER BLO GUN SAFETY

Have been looking for these for a while and i have had no luck at other stores this is just what i needed.

Buy Milton S150 Lever Blo Gun Safety Now

Milton S150 Lever Blo Gun Safety

Great item from a fantastic company. Any thing Milton is going to be a good item and last for years. I buy all my hose connectors from Milton because I've bought the cheap ones and they don't seal completely or break right when you need it the most.

Buy with confidence.

RagenRat

Ingersoll-Rand 107XP-TRK1 Air Ratchet Head Repair Kit

• Air Ratchet Head Repair Kit for use with 107XP

Good product, exact fit and will last a long time. Fast shipping from vendor but felt item was a little pricey considering one could purchase a complete air ratchet for a little more. Otherwise satisfied with service and product.

Buy Ingersoll-Rand 107XP-TRK1 Air Ratchet Head Repair Kit Now

Great product. Genuine Ingersoll Rand product which fixed my air rachet. Very quick shipment from the vendor. I highly recommend this.

Charlie Kuss

PneumaticPlus SAU4010M-N04BG Two Piece Filter Regulator Lubricator Combination 1/2" NPT - Manua

• Includes 0-150 PSI Pressure Gauge & Bracket
• 40 Micron Element Stanard
• Manual Drain & Polycarbonate Bowl with Bowl Guard
• Manufacturerd In Korea

This Filter REGULATOR LBRICATOR Piggback i've had for sometime now and it's turn'd out to be the best filter i've gotten for my compressor and for the money i should have done this a long time ago.Filter Regulator Lubricator if you have a compressor it's a must to have.

Ingersoll Rand F35121-400-VS 1/4-Inch Air Line Filter, Black

• 1/4-Inch NPT
• Standard Filter - 5 Microns
• Manual drain
• 0.5-Ounce polycarbonate bowl with guard
• 49 CFM

I bought this to keep moisture out of the R37121-600-VS 1/4" regulator on my 30 gallon automotive compressor. I use the compressor to run an airbrush. So, the compressor only cycles a few times a day, but the unit is pressurized all day long. Therefore, I like components to hold pressure Leaking air is a bother. This filter holds pressure quite well with little noticeable loss after a day.

The filter seems carefully designed and well made. It is light-weight, but it does not look or feel cheap. I think it will last. The housing is plastic with aluminum internal components. It has a clever, sliding detente to release the bowl. Like other manual drain filter units, there is a pin at the bottom that can be pressed to release air and water while the compressor is pressurized. When the compressor is depressurized, you can remove the bowl.

This filter is cost effective, holds pressure, and works well. I recommend it.

Buy Ingersoll Rand F35121-400-VS 1/4-Inch Air Line Filter, Black Now

When I first received this filter, the o-ring for the canister-to-housing seal was twisted and pinched, causing the filter to leak considerably. With a bit of fuss, I was able to re-seat the o-ring, and get it to hold pressure. You also have to be careful to wiggle the drain valve a bit after draining the water to get it seal tightly. Another gripe is that it doesn't come with a wall-mount bracket, so I built one myself (see attached picture).

Overall, it's functional, extracts moisture from the air line, and is easy to drain. It does leak a tiny bit, causing the air compressor to come on approx 3-4 times per day for a few seconds when not in use, but that's bearable.

Read Best Reviews of Ingersoll Rand F35121-400-VS 1/4-Inch Air Line Filter, Black Here

I was a little skeptical about buying such an inexpensive filter for my air system a few months ago, but I have to say that it has worked very well, and I'm very pleased. You can't go wrong for the money, and IR is well established in the industry. Never had a minutes problem with any of their compressors through the years.

Want Ingersoll Rand F35121-400-VS 1/4-Inch Air Line Filter, Black Discount?

I gave this to my dad and he hooked it up to his air system in the garage. It was only $15 and provides a lot of features you don't get with those cheap $8-10 filters in the big box stores. I think this it well-made and will last a long time. It has a cast aluminum head with the inlet-outlet and the filter box is removable. I think you should be able to buy replacement parts since the filter comes out and there are part numbers on some of it but I am not sure. I would recommend this for anyone needing a good filter or water seperater.

Also, regarding the other reviews about a mount, you can get a double-side threaded connector and screw it directly to the pump or to a hose-reel. A mount is not needed unless your set-up does not provide a few inches of clearance to connect it like I discribed.

Once these are installed CORRECTLY, they work well!

First off... they are small. Don't expect something 12" tall, they are very small in size.

Second... they are NOT supposed to be installed near the compressor itself. For a filter to work properly, the air has to be cool as it enters the filter. If near the compressor, the air is hot and it will not separate the water. MAKE SURE to mount far from the compressor, and near the tool or end of hose.

Third... it's always best to use hard line up to the filter, from the compressor. Air Hose, is not the answer. Make sure to use the proper hard line (pipe) to the filter for it to be most efficient.

NuMax SBR50 18 Gauge 2-Inch Brad Nailer

• 1 Year Warranty
• Adjustable Exhaust
• Air Filter
• High Quality Internal Parts
• Hardened Driver Blade

THis product is lightweight, well balanced, and has a soft rubber grip. There are a lot of finishing nail guns in the $20-50 range, after a lot of searching around I opted for this one. I have owned a few other brands some costing more and some less..generally after thousands of nails some problems would arise.. this is normal wear and tear and its easier to purchase a new and reliable gun over rebuilding the many seals and pistons in the gun.

My first option was to purchase a rebuilt Bostitch or similar high dollar gun I decided against that seeing how many of the guns took beatings under the abuse of contractors.

Next I ruled out Chicago because the body seemed flimsy and prone to leaks at the main valve seal.Previously owning a Central Pneumatic unit (which comes with a case for the same price) the only reason I didnt buy another is the saftey is bulky and prone to getting bent out of shape. The gun then doesnt fire as easily, and you have to make sure the tip is pressed AND the safety is satisfied.

This gun has good reviews all around, solid construction, and it shoots Brad nails upto 2" (all the way down to 1/2"). No case included and I would replace the air inlet adapter with quality one. Oil frequently.

Buy NuMax SBR50 18 Gauge 2-Inch Brad Nailer Now

Postives:

Light, easy to handle

Very few jams

Easy trigger pull

Accepts longer brads (up to 2", although I haven't used any over 1-3/4")

Negatives:

No adjustment mechanism for the depth to which the brads are driven, which is a feature that is quite handy. Even the comparable Central Pneumatic brand (Harbor Freight) brad nailers have this feature.

No rubber foot on the contact point--the tool WILL leave a dent after the brad is driven. With the proper technique (it takes some practice), the mark can be minimized.

Male air coupling provided with the tool did not engage correctly with the female fitting on the air hose. The result was a slow leak that caused the air compressor to cycle frequently, even when the tool was not being used (quite annoying with an oil-free compressor in a small room). Use matching coupling components (i.e., same brand) to eliminate the problem.

Read Best Reviews of NuMax SBR50 18 Gauge 2-Inch Brad Nailer Here

Needed a "cheap" nailer to install baseboard in 1400 sq ft house. Figured it would be a throw away after this job. What a surprise to find after 1000 nails, and no jambs, it is as good as new. Great buy.

Want NuMax SBR50 18 Gauge 2-Inch Brad Nailer Discount?

Im a Woman and do all the handyman stuff around my house, I just love this nail gun, the only thing I would suggest is buy bostitch nails, I have never had the gun jam until I bought some off brand so stick with this brand and the gun works perfect.

Save 57% Off

Bought this one based on reviews on Amazon.com. Used it for window

trims in my house. It worked flawlessly for the whole project that involved

like 6 windows. Yes, you need a little experience to hold it with the right

amount of force so that it does not leave a dent in wood piece when your

fire a nail. But you can learn this through experiment.

Primefit IK2001S-30 1/4-Inch NPT Air Accessory Kit with Storage Case, 30-Piece

• 30 essential air accessories in a durable clear storage case for easy access and organization
• Includes blow gun with 5 different nozzle attachments
• Contains a dual air chuck and ball foot style air chuck for various inflation applications
• Includes 2 quick connect couplers, 11 quick connect plugs, pencil tire gauge, 2 inflation needles, PTFE tape, 4 hose fittings
• Durable Steel construction with zinc plating for corrosion resistance

I hate our reliance on PRC for, well, just about everything these days, it seems.

Anyway, I'm surprised by all the good reviews of this kit. The tire pressure gauge only goes to 40 PSI and is flimsy and inaccurate. It went right in the trash. Useless. The quick-connect couplers thread *very* poorly on my excellent Goodyear 3/8" hose. This results in leakage. Lots of it. And all the teflon tape in the world doesn't help. The blower gun does what it should, but boy is it flimsy. As for the plethora of other attachments... meh. I doubt I'll ever use most of them.

If I were to do this over again, I would buy just one quality brass quick connect socket for attaching tools. For the other end of my hose I'd buy one male plug to connect to my compressor's quick connect socket. Then I'd get a blower tool and an inflation tool with built-in gauge. (FWIW I just got the "ARB ARB605 Blue Inflator with Gauge and Braided Hose" from amazon, and it is excellent. 5 stars for that gem.)

So, my advice is to skip this kit. It's garbage and has a lot of stuff you'll probably never use.

Oh, lest anyone think I just don't know how to attach a coupler to a hose, I picked up a good one at the local auto parts store and it works perfectly. No leak, simple to attach tools.

Edit: Made in USA couplers and plugs by Milton (Milton Ind/INCOM S-711 M-Style Coupler And Plug): http://www.amazon.com/gp/product/B00173CTRQ/ref=oh_details_o02_s00_i00 I have two of these on their way to me from amazon.com, now. Based on others' reviews, I expect them to be perfect.

Amazon how about a search filter for "Made in USA"?? Boy would I appreciate that...

Buy Primefit IK2001S-30 1/4-Inch NPT Air Accessory Kit with Storage Case, 30-Piece Now

I just bought a compressor and needed fittings. This kit fit the bill perfectly. All fittings are of good quality and the kit contains everything you might need to outfit a compressor and plenty of air tools. The only negative is the quick connects. You can't just plug a nipple into them. You must first release the lock and then insert the nipple.

Read Best Reviews of Primefit IK2001S-30 1/4-Inch NPT Air Accessory Kit with Storage Case, 30-Piece Here

What you pay is what you get.

Did not like it and hence returned it.

Quality not great. More like a toy then a tool.

Again it comes down to what can you expect in this low price.

A little higher spend can fetch u better one.

Want Primefit IK2001S-30 1/4-Inch NPT Air Accessory Kit with Storage Case, 30-Piece Discount?

I bought this at a really low price, and didn't expect too much out of it. I mainly just wanted the air gun, and was happy to get a few extra pieces.

Unfortunately, the air gun "leaked". Without depressing the trigger, it would blow a light stream of air. This would cause my small 1 gallon, 1HP compressor to take a very long time to charge, and to discharge even more rapidly. Also, one of the quick connect coupler's ball bearings fall out when switching tools. It works fine when only one falls out. But leaks very bad when the second and/or third BB falls out. The other quick connect coupler works fine. All the non-movable parts work fine.

So, maybe you'll get lucky and have everything work. I wouldn't buy this again, but still got most of my money's worth because it was so cheap.

Save 64% Off

Great product for the price. Has everything you need for filling tires , balls , as well as blowing air. Comes with more than enough fittings . Ive had similar in the past but have misplaced them. With the handy storage case , i dont think i'll be losing these.

1/4" Pneumatic Air Angle Die Grinder Right Angle Air Grinding Cut Off Wheel Tool

• 1/4" Pneumatic Air Angle Die Grinder- Cut Off Wheel Tool
• Air pressure: 90 psi Side to center (M/M): 34
• Free speed; 20,000 rpm
• Air inlet size: Standard 1/4" NPT
• Capacity 1/4"

I use hand tools like this grinder at work everyday so I really put them through alot of use so far this grinder has not let me down.I am so glad Amazon had these.and at a GREAT PRICE.I am so grateful for Amazon and there products I am a returning customer.THEY REALLY SHOULD BE A SECRET.

Buy 1/4" Pneumatic Air Angle Die Grinder Right Angle Air Grinding Cut Off Wheel Tool Now

At first look it looks cheap but it works really great I am using it to grind my truck to fix some dents and it is working great. I definitely recommend to anyone who is learning and needs low priced tools.