1/2 HP Ultra Quiet & Oil-Free Air Compressor Pump/Motor

• 1/2 Hp Air Compressor Pump/Motor
• 1.90 CFM @ 40 PSI & 1.10 CFM @ 90 PSI - Max 120 PSI
• Ultra Quiet - Only 56 Decibels
• Low Amp Draw - 4.5 Amps
• Oil-Free - No Maintenance - 3000 hour lifecycle

I wanted to write this review especially because of the lack of reviews. I have been using this compressor for air assist on a Laser Engraver. This compressor holds 50psi on a short(5') run of 1/4" line. This compressor is indeed quiet, having a low sort of sound that is far more appealing than a metal on metal clickety clack sort of sound. I have it sitting on a folded towel to further reduce vibration. It comes shipped without a plug end(user supplied) and without the capacitor wired or mounted. I built a capacitor mount for mine, but it is a bit annoying to have it flopping around next to the compressor. In an effort to extort more life out of compressor, I have a fan positioned towards the compressor if it has to run for an extended period of time. Overall good build, if it does reach the claimed 3000 hours I would consider it a great value.

Save 37% Off

Ingersoll Rand SS5 5-Horsepower 230-Volt 60-Gallon Vertical Compressor

• Durable cast-iron cylinders, heads, and frame are designed for continuous operation and extended pump life
• Oversized belt wheel provides reliable design and cooler operation
• Ingersoll Rand synthetic lubricant provides 2,000-hour oil change intervals(four times longer than mineral-based lubricants
• High-efficiency stainless steel finger valves are simple, efficient, and easy to maintain
• Manual thermal overload protection of the motor

Bought this from Amazon for the cheapest price on the web, particularly when you factor in the free shipping. Mine was packed well and sat on a pallet. It is very heavy, so make sure you have it in position before taking it off the pallet.

The unit is quiet, much quieter than the standard small 110v compressors you see at Sears/HD/Lowes. There's only a light hum if you close the garage door. It is also extremely efficient fills rapidly and can run continuously on the Ingersoll Rand all season lubricant. Provides plenty of power. Very simple and straightforward design which should make it more durable and reliable in the long run. IR tech support is excellent and these are amongst the best compressors you can buy. Basically, they allow you to focus on the job, not on setup and tool management.

A few things to note when buying this in case you don't have experience with this type of product.

1. You will need an air regulator to regulate pressure out to the tools. Unlike the smaller models at Home Improvement stores, this does not have a built-in regulator just a gauge measuring tank pressure. You may also want to consider a lubricator. IR makes them and Amazon/Northern Tool have the lowest prices I could find.

2. While the unit is rated at 30 AMPs, it actually spikes much higher at startup. It would keep shutting off when we had it on a 30 Amp breaker. Talked to IR tech support (who were very helpful). They recommend the unit be hard-wired (not a plug) and that it be on a 60 Amp circuit. This meant rewiring (EXPENSIVE) using 6 gauge copper (EXPENSIVE), a new breaker and a hardwired connection with a disconnect. Could you get away with less ? Perhaps. But I wanted the warranty protection, wanted IR's recommended settings in case something went wrong and wanted to be up to code.

3. The manual drain valve at the bottom is a PAIN to get at. Either mount the unit high enough to reach easily or get something that allows you to drain it without having to crawl around on the floor with a pair of needle-nose pliers. (Ask me how I know...)

4. The 1/2" NPT outlet is nice, but be aware the local home improvement stores may not carry 1/2" fittings. I had to get my regulator, connectors and hose online.

5. The manual recommends IR All-Season lubricant if you want continuous duty.

Overall, I'm very very happy with this purchase.

Buy Ingersoll Rand SS5 5-Horsepower 230-Volt 60-Gallon Vertical Compressor Now

I bought this compressor because I wanted to get into auto painting and my 5.5 CFM Lowes compressor could not cut it. I did my research and compared this compressor to locally available compressors and other compressors at a similar price point around the web, but nothing else compared in price/performance ratio.

I purchased from Amazon and the free delivery (including lift-gate and basic placement service) made this an even better deal than the other competitors whom charge extra for unloading off the truck (lift-gate).

When you receive this compressor, what you will need is ~2 pints of compressor oil lubricant (I bought synthetic for $6/pint at Lowes locally) and your own power cable and plug to wire into the compressor (needs 230V/single phase/60Hz., using the black/red/green wires (hot/hot/ground) [white-common is unused]). While on the power subject, another reviewer recommended using 6AWG wiring and 60AMP plug/receptacle/breakers... THIS IS NOT NEEDED. Unfortunately, I took this bad advice and wired a 14-60R connector into my garage for this compressor prior to receipt using 6/3+10AWG ground cable and purchased the plug and receptacle online for >$100 combined. Too bad my compressor has never used over 40 Amps even during spikes so far... So, my recommendation is be safe and wire it for 40 or 50 AMPs using readily available parts at the big box stores. The crimp connectors and wiring used by Ingersoll Rand in the wiring box appear to be 10AWG stranded wire and you will need two crimp plugs (yellow 12-10AWG style) and one crimp fork connector (also yellow 12-10AWG style) for your three power connections. Also, one intake air filter is included, but an air regulator is not included.

Optional (but you really should get these too): As stated in other reviews, the drain is difficult to access. I removed the entire drain plug and replaced it with an elbow, extension and ball valve. This is what I did starting from the removed drain plug: [1/4 Male ID 1/4 Male ID] [1/4 Female ID 3/8 Male ID] [3/8 Female ID 3/8 Female ID Elbow] [12" long black pipe 3/8 Male ID 3/8 Male ID extension] [3/8 Female ID 3/8 Female ID ball valve]. Also, I bought an Ingersoll Rand Combination Air System Accessories 1/2in., Filter, Regulator, Model# P39344600 and so far it is performing great.

I have tested the compressor with my IWATA LPH400 HVLP paint gun while painting and it quickly compresses the air back to the cutoff point (125psi). Once the compressor kicks on, the tank will still build pressure. So at 100% air consumption load (for me) the compressor will still refill and turn back off and I never have to let off the trigger. I have read some reviews about people thinking this compressor could not handle automotive painting, but if it was dedicated to that purpose, it could handle it with ease. I am using this compressor non-commercially, but I bet this compressor could support a small shop.

In conclusion, I am very happy with this purchase. Also, the air outlet is 1/2 Female NPT if anyone needed to know that. I used a brass nipple from this outlet into my regulator/filter and then flexible hose from there and converted to 1/4NPT (3/8 hose) the rest of the way out.

Read Best Reviews of Ingersoll Rand SS5 5-Horsepower 230-Volt 60-Gallon Vertical Compressor Here

Great buy.Pumps up quick and is fairly quiet.Only thing I would reconmend is before you bolt it to the floor,go to the hardware and get a brass 1/2in. 90 street elbow,12in. 1/2in. straight and a 1/2in. ball valve for the drain on the bottom of the tank.Put the ball valve out in the open so you can drain the tank easy.I did this.I wouldnt even want to try and drain it with that petcock.Also do not buy the start up kit.I did just to find that the kit that was reconmended was for a different model and the air filters wont work with mine,and I found the oil locally was only $6.00 a quart.The kit has 2 pints.

Want Ingersoll Rand SS5 5-Horsepower 230-Volt 60-Gallon Vertical Compressor Discount?

I had to search for a compressor so I could ditch the oil free dewalt I bought from Home Depot. I wanted something quieter but more importantly it had to have a bigger pump. I just do not want to listen to the constant running as I did with my Dewalt. The good thing about the dewalt is it was a 200 PSI compressor.

I narrowed my search down to Ingersoll-Rand. I read lots of reviews and narrowed my search to this one for the price. I bought mine at a local supplier on sale. I love it and it is much quieter than I expected. Takes about 3 min to fill the tank from empty. I also picked up an IR filter,regulator and oilier to go with it.

People complain about it not having a regulator on it makes no sense to me. This is the type of compressor that you run a branch of lines then mount a regulator and adjust your air. This unit should come with a regulator not mounted on the unit. I installed mine with 1/2 wedge anchors and used leveling nuts because my basement floor is not level.

I bought this compressor to do a boat renovation, lots of sanding and painting. There are several things you should know before you buy this unit!! Not bad just a lack of info about connections and startup. First of all this unit does NOT run on 30amp service as stated. IR wants it hard wired to a 60amp dual pole breaker!! Secondly, they do not tell you until after you receive the unit that they will double your pump warranty if you use the Ingersoll Rand Synthetic Lubricant if you purchase w/ the compressor. You may buy it separately and place a sticker from the startup kit on your pump also. The other reviews were very helpful in the wiring and plumbing dept. You will definitely want to reroute the drain before bolting it down and you will need to buy a regulator and some 1/2" plumbing to get to your hose connection. I used brass parts. I will add to this review once I finally have the system prepped and ready to use. I anticipate that it will far surpass my needs and be a great purchase.

LG Electronics LW8011ER 8000 BTU Electronic Air Conditioner with Remote

Now on my second season and runs very well. Temps over 100 everyday now an this unit cycles on an off as needed. No fan noise as other reviewer had stated. They can be damaged in shipping but mine worked better than expected out of the box. Easy install an this unit replaced a GE that only lasted 3 seasons. Highly recommend an the energy star rating is just a big plus........

I really don't know if the negative reviewers have mental issues or not but most of them seem to hone in on the noise emitted by the air conditioner. Hello!..... It's a window unit all in one, how would they make it silent? If you want silent, go buy a split unit so all you have is the fan inside, as they do in Asia.

I bought it Sunday, got it Tuesday and put it in the window in less than an hour. The room is cold, there is no vibration as some others have complained and it's not exactly whisper quiet on full speed but who would expect it to be? C'mon. As far as it going off and on every three minutes, mine has been working continuously for the past hour. I expect it cycles on and off in a different mode.

Look folks, it's a window unit air conditioner. If you want silence, go put some duct work in your house and central air. I'm satisfied.

Oh and one more thing, it was this one or the Frididaire and I wanted to buy American. Good luck. The Frigidaire is made in China so it was China vs. Korea ... hmmmm a no brainer in my decision making.

Buy LG Electronics LW8011ER 8000 BTU Electronic Air Conditioner with Remote Now

This air conditioner seems to cool well. What is bothersome tome, is that it goes on and off every 3 minutes.

I usually put my window ac unit on "energy saver", meaning if the temperature is ok, it doesn't turn on. However, this one turns on every 3 minutes, whether you like it or not. In order to check the temperature, it turns on the fan to do this. At night this is a nuisance.

Read Best Reviews of LG Electronics LW8011ER 8000 BTU Electronic Air Conditioner with Remote Here

Sizing calculations said I need an 8,000 Btu unit for a 16 x 16 room. In fact, the unit will cool this poorly insulated rom from 95+ degrees to 72 degrees within 2 hours. Other reviewers said the unit was noisy. I didn't have a proper window. so I had to cut a hole in the outside wall and mount the unit. ( It just fits in 2 x6 studs + 1/2 ply + 1 inch siding) . Using spray=foam insulation to sound deaden, the unit is NOT loud, does not disturb neighbors at night, nor cannot be heard elsewhere in the house. I am very satisfied A great price, great unit and very good performance. I wouold readily buy again. C.R. Greene Santa Rosa, CA

Want LG Electronics LW8011ER 8000 BTU Electronic Air Conditioner with Remote Discount?

[Overall]I am a light sleeper. After doing an extensive searching for a quiet air conditioner for about a week (I even purchased subscription to consumer reports), I decided to purchase this item and I am currently quite happy about it.

[Very quiet. Cools 20x16ft bdrm]I installed this unit in my bedroom and the lowest fan setting is really quiet. The strongest fan setting (there are 3 in total), is about as loud as my regular fan. The size of the room is about 20x16 ft and with a powerful fan inside the room, helping the circulation, it cools the room quite quickly. Occasionally it will turn on and off as mentioned by other reviewers. However, this didn't bother my sleeping.

[Comparison to Frigidaire] I originally had Frigidaire 8000 BTU unit installed. However, not being able to sleep for about 2 weeks due to its noise, I have switched to this one. For people that wants a quite AC, this one will be a good choice.

[Perks: Thru-the-wall slot?] My apartment has thru-the-wall slot for air conditioners. I purchased this item without knowing that this is "windows" type air conditioner. However, the air conditioner arrived on a day that was 97 F and we decided to place this AC inside the slot and give it a shot (instead of cooking inside a piping hot room).

It worked fine. However, compared to Fridgidaire, it wasn't as cold, probably because we didn't place it on windows. However, we decided to cut the styrophome that was part of the packaging and used it to block any hot air from creeping inside. Currently, it shows about same performance as the fridgidaire.

General Tool 836 Angle-izer

• Tough plastic design won't bend or rust
• Ideal for tile, paving, carpentry
• Free instruction CD

I wish I had this when I was just doing a kitchen floor that had a lot of weird angles. This is a great little inexpensive way to measure the angles and get them cut correctly. I guess the pros must all have these, but I'm a weekend warrior with these projects, so sometimes I'm not aware of every tool out there.

With this tool you can get a "template" sort of for every cut you have to make. It really works well. It's not expensive and it will pay for itself by saving you from having to throw away incorrectly measured cuts. If you have to do any sort of flooring or any odd angle cutting, you'll love this thing.

Buy General Tool 836 Angle-izer Now

I used this for laying out window sills. The angle of the corner of the wall window opening is never 90 degrees and usually varies widely from window to window (depending on quality of framing and drywall finishing). So each window sill ends up being a custom fit.

With this tool, I can establish the angle, lock it down, then transfer it over to the sill. Zip it out with a saber saw and finish (route edges, sand, stain, etc). Done!

Good deal!

Boston Industrial Air Regulator with Brass Gauge

• The thread size is 1/4 inch NPT on both the male and female ends
• Made of solid brass with gauge
• Regulator had a 160 PSI maximum
• Provides fine air control for spray guns & air tools
• Infinite adjusting range fits any spray gun or air tool inlet

The reason I bought this is because my old plastic air regulator for my Central Pneumatic air compressor had blown out. It had developed a hole inside around the handle which would constantly let air out, causing my air compressor to stay on constantly, trying to bring the tank pressure up.

Just a little FYI for those who are beginners to air compressors. If you have a hole letting air out, and or the tank drain is not sealed, it will cause your air compressor to come on and never turn off. This is a bad thing because it will cause your air compressor to burn up under the strain due to overheating.

I went on Ebay looking for a metal air regulator which in my opinion, should not ever break. I noticed they were selling these brass metal ones for only little extra cost of the plastic ones. These ones are all made of metal, minus the gauge housing.

First thing I did was put some Teflon plumbers tape onto the pipe threads of my pressure switch. Then I tightened the air regulator down onto it, it seems to make a good seal there. I then put Teflon tape on the other end so that I could attach my connection manifold.

Another FYI, a connection manifold is basically like an adaptor. It takes the single output of your air compressor and turns it into three. This way you can have a total of up to three hoses connected to it at any given time. I use one because I find its more versatile for all that I use my compressor for.

Once I got it all connected, I turned on my air compressor and let it build up pressure all the way inside the tank. I was watching the needle slowly go up on the gauge, so I knew that was working. One of the biggest differences between my old regulator and this one is the pressure regulator valve.

On my old one it was large, could grab it with your whole hand, and it was quite precise adjustment. This one is more of a thumb screw type and its less precise adjustment because its a ball type valve. Now this doesn't bother me too much, I just thought I should mention it.

It does seem to regulate the pressure well, but because of its design, your adjustment of pressure does not seem to show up right away on the gauge, which I find kind of odd. The other thing I don't like about it, is on the opposite side of the thumb screw, there is a retainer clip on it.

Around this area, air will leak out. Now, I have no doubt in my mind that it is designed to do this to a certain point. But it felt like it was not stopping. The air it was leaking out however was a very tiny amount, and when I finagled with it, it seemed to have stopped somewhat.

So, my review of this brass air regulator with gauge is that, I think its a SWEET regulator, and I think it will last a long time. I just feel it could be better engineered for better efficiency. I do recommend it for any home use air compressor. I do not recommend it for commercial units.

If I learn anything more about this regulator with gauge in the future, I will be sure to update my review. Hope this helps...

UPDATE! 2010

As promised, I would update you guys if I learned anything new. I just discovered something important that I think anybody who is wanting to purchase this should know.

As I mentioned in my review, these regulators are designed differently then the more precise regulators you might also be accustomed to. However, for what I use my compressor for, I do not need the ability to adjust my pressure in 2-PSI increments! LOL

Each turn of the thumb wheel adjusts the pressure by 25-PSI difference. Remember what I said about the gauge reading the pressure funny when adjusted? How do you know what pressure you are at?

Thats because with this design of regulator, you must key your air tool in order to see the pressure level. When you let off, the needle on the gauge returns to max tank filled pressure. Key your air tool again, and the needle will go down to the set pressure.

Strange design I know, but at least it works, and at least, now you know. Hope this update helps... :-)

Recommended:

Yes

Buy Boston Industrial Air Regulator with Brass Gauge Now

Item was advertized as a regulator. In actuality it is nothing more than a valve with a gage attached.