Makita 3606 7.0 Amp 1 HP Router

• Contoured double handles for comfort and control
• Large calibrated depth control ring
• Shaft lock for quick changing of bits with just one wrench
• 3-1/2" diameter detachable motor for use on commercial router bases
• Hi-speed motor for powerful smooth cuts

For what this is, it is an excellent little beast.

It does its little tasks perfectly; I keep it for hinges and lock keeps. I set the depth at the beginning of the job and never have to change it. My more expensive and heavier router stays in the box.

Weighs nothing and with the right bit it saves me a fair amount of work.

Buy it without thinking too long or deep.

Buy Makita 3606 7.0 Amp 1 HP Router Now

All my routers are Makita and they're all a pleasure to use. This one is no different. I wanted something I could put a template on to rout door hinges. This is light weight and great for that job. Just beware it only accepts 1/4 inch bits.

Read Best Reviews of Makita 3606 7.0 Amp 1 HP Router Here

I bought this router for my husband for Christmas. He makes wood signs and needed a light weight router for carving. He put the Makita 3606 router on his wish list but thought it might be expensive since you can only get them from the manufacturer or independent wood shops. I found it on Amazon for an amazing price and he was so excited on Christmas morning. He has already made a few signs for our friends with it and he LOVES it!! This was a GREAT BUY!!!!

Want Makita 3606 7.0 Amp 1 HP Router Discount?

If you are looking for a small router for free hand routing such as sign making, this one will do the job. small enough to handle yet plenty of power to do the job. like most makita tools that i own its well built for years of use.

Save 25% Off

The router has been very reliable in the past 2 yrs. No complaints from our customers in performance or reliability.

Leo Wissler

IIT 10200 Air Regulator with Gauge

• Adjustable from 0-160 PSI
• Built-in gauge
• 1/4" NPT Fitting

This does not have an air regulator. It has a simple ball air-valve not providing any air regulation other than open / closed capability.

Buy IIT 10200 Air Regulator with Gauge Now

please do not wast your money on these regulators like i did . unfortunately from looking at the picture they looked like a nice solid unit so bought like five of them. They leak and fall apart save your money go with something else.

Read Best Reviews of IIT 10200 Air Regulator with Gauge Here

be aware!!! it is not a regulator......it is a paddle valve that does not regulate the pressure. I run 180 psi on my main line and wanted to use these for my two finishing guns in my spray booth. It starts the pressure at 180 and then will allow you to adjust it down when in use only, but bumps it back up as soon as you let go of the trigger.

Want IIT 10200 Air Regulator with Gauge Discount?

Nicely made and worth the price. It is really not a pressure regulator but a pressure metering valve. I could do the same with an orifice. To meet my needs I ordered another adjustable spring type pressure regulator.

Nelson 50336 Brass Hose Quick Connectors Set, Male and Female

I have been in the horticulture industry for 31 years and a gardener for a decade before I began making my living in the field. For decades, I have used Nelson brass quick couplers. They used to be one of my favorite tools, but were redesigned a few years ago. The old style model 109c worked great, better than their competitors models. The new design has problems.

My problem, as I see it, and my assessments are made from experience, is with the o-ring that has been added to the female part of the coupler. If you have good water pressure, and are using the hose equipped with only the female coupler at the end and without the male end plugged into it the o-ring will be blown out of the female coupler. Then, when you want to use it with the male plugged in, your seal is gone, and your coupler leaks! And good luck finding that o-ring somewhere out in the flower bed.

I have complained to Nelson about this but they are apparently committed to the design as it has been several years since it was introduced. It is a shame that a good product was "updated" and can now render itself "broken" after just one use.

The best part of these is that they are brass and not plastic. They are very heavy duty and do exactly what they are supposed to do. The only drawback is that they are not interchangable with other types of quick connect fittings. That said, I purchased a whole bunch of these (they sell a two-pack of male fittings you will need more of those). Female attach to the spigot and male attach to your various sprinklers and nozzles.

The number one rule is that plastic and hose fittings dont go together. Plastic threads will fall apart VERY quickly stick to brass fittings.

I am very impressed with this.

Buy Nelson 50336 Brass Hose Quick Connectors Set, Male and Female Now

Have not purchased these yet, but do own several of the LR Nelson N109C quick disconnects.

I was curious was if the new #50336 would be compatible with the older N109C so I contacted LR Nelson directly.

Their response...

They are exactly the same item,just re-numbered.

Hope this helps someone.

Jeff

Update 7/7/10: I purchased the #50336 in August 2009 and they work with and look exactly like my older N109C that I ordered from Amazon in the years past.I figured I'd mention this as one reviewer stated that the older N109C has an auto shutoff in it and restricts flow. Nelson did make an auto shut-off model in the past (which I also own) but the N109C model absolutely does not have any type of shut-off in it.

Read Best Reviews of Nelson 50336 Brass Hose Quick Connectors Set, Male and Female Here

Hose Quick Connects are made by DRAMM, Orbit, Gilmour and Nelson and maybe Camco still?

After reading some positive reviews, I ordered a pair of Nelsons, wrongly thinking they were made in the USA, and was really distressed to see what poor quality they were when I received them. The oring was extremely poor and the brass was very, very lightweight and cheap, I thought it was copper coated spun aluminum it was that light. It was then I noticed Nelson made them in China. In addition the tolerance is poor on the Nelson and they don't 'snap' cleanly like my old Nelsons. This is no quick connect if you have over 50 PSI it is simply too light to last.

I needed quite of few of these and ordered one from Gilmour, Orbit and DRAMM as the reviews of these products were just too poor to go by.

I found out Orbit now makes their's in china as does Gilmour.

Of the made in China quick connects the Orbits is far superior in design and brass quality to the Gilmour or Nelson, it has a lot of heft and the machining is quite good and it solid brass with some rubber to help you make the connect. It almost looks like a made in the USA Orbit part but the copper content is not quite as high and the finish not as good as my made in the USA orbits

The DRAMM quality was superb, so I ordered a fews of dozen of those. Excellent design, solid, good machining and a nice 'snap' to the connect/disconnect.

Here is how I ranked them

1. DRAM superb machining ,brass and quality. Will only order DRAMM from now on.

2. Orbitacceptable machining, above average brass and finish quality-Will order a few more as spares for the the USA orbits I have. They are the cheapest of the made in China gang and best Chinese quality. Orbit has done a good of controlling the quality in China and probably have their own factory there, versus using job shops at Nelons/Gilmour.

3. Nelsonunacceptable machining, below average brass and finish quality. I have some low PSI lines that are fed by Rain barrels, that is where these will go. I won't order Nelson until they start making these parts in the USA to their old standards.

4. Gilmoureverything was unaccpetable about the gilmour parts and the machining was so bad it took about 3 minutes of jiggling to connect, disconnect . I will return the Gilmour. I have had such bad luck with Gilmour since they went to China, I don't know why I gave them a chance. The Gilmour made in the USA parts were pretty decent but not these!

My quick connects get hard use on a farm. I going to order enough DRAMMs for the rest of my life as I don't wont to have to sort out the variable chinese quality and with inflation, I don't want to have to pay 50 bucks in 10 years for made in China Nelson or Gilmours.

Hope this helps save you the aggravation if you're used to made in the USA /high quality quick connects.

Happy Resurrection Day!

Want Nelson 50336 Brass Hose Quick Connectors Set, Male and Female Discount?

This product is a lot more expensive than the quick disconnects at my local hardware store, but I figured I wanted a good product that would last, and for solid brass, and the great reviews, it would be worth the extra money to get a quality product. I am using these in an rv. I purchased 2 of these, and intended to purchase more. However, after the first use, I decided against it. The quality of construction is in deed good, however, I found that unless the hose is positioned just right, the connection will leak--alot! I could not get the leak to stop without moving the hose around, but who is going to sit there and hold it in one place? I am thinking that maybe this would work ok on a home faucet where the water pressure is higher (50-60 psi) but the water pressure going into the rv is regulated to 45 psi, and may not allow it to make a good seal. At any rate, both leaked very badly, and will not be suitable for use in the rv.

Save 46% Off

Midwest Can (MWC5600) 5 Gallon Auto Shutoff Gasoline Can

• Midwest Can #5600 5GAL RED Plastic Gas Can
• MIDWEST CAN COMPANY

Pros are it has a good capacity, the Cons are that the nozzle is too restrictive. It takes double the time to get the gas out of the can due to the safety feature in the nozzle.

Buy Midwest Can (MWC5600) 5 Gallon Auto Shutoff Gasoline Can Now

I purchased a model 5600 (5 gal.). I'm not sure if it has the same spout as this #6600. If it does, I would not recommend the gas can (apologies if this review is irrelevant). It is a self-closing spout with a spring (the nozzle must be twisted then depressed to dispense gas). The spring is stiff and difficult to press down. There is a little plastic lip that is intended to hook on the edge of the gas hole which is too small and therefore constantly slips off (shutting off the gas dispensing). Given the angle of the spount, I can't dispense all the gas into my car. Finally, the gas comes out very slowly when it does come out. It is a frustrating experience to wrestle with this can while trying to dispense gas into my car.

I've been shopping around the area and simply can't find a plastic gas can without some inconvenient "leak proof" dispenser system. Why is it so hard to find an old fashioned gas can that works? I can only conclude that there is some conspiracy out there -probably a new EPA regulation (well intentioned, no doubt, but unfortunately resulting in products that don't work). Please, I can screw a simple threaded cap on all by myself. I would have given the product a 1-star, but my guess is that it's not Midwest Can's fault.

To their credit, Midwest Can customer service is very responsive. They are sending me a replacement cap for "gas storage," i.e. a simple threaded cap. I'll just buy a funnel to get gas into my car.

Read Best Reviews of Midwest Can (MWC5600) 5 Gallon Auto Shutoff Gasoline Can Here

Works fine, spill proof spout is a bit slow and cumbersome, but that's the only complaint. Almost impossible to find a 6 gal can. Use it to store mixed gasoline for 2 cycle outboard motor, 50 to 1 mixture is one pint oil to 6 gals of gas. Just makes things simpler.

Want Midwest Can (MWC5600) 5 Gallon Auto Shutoff Gasoline Can Discount?

I am not going to go into how the nozzle works because it has been covered in other posts. I just want to support the notion that this can is very slow. Not a big deal if you are pouring gas into a weed trimmer but it is a serious pain trying to pour gas into a boat. The last time I tried to fill something it built up with pressure and preceded to spray gas everywhere for quite a long time. I never seemed to have trouble pouring gas until I got my hands on one of these. I would not recommend getting anywhere near a hot engine with this gas can.

Save 60% Off

These CARB compliant cans are very bad. They spill gas all over you, the environment and your gear. Why can't the government politicians trust us to simply put a lid back on the can?

Tool Force A-C2 HVLP Touch-Up Spray Gun

• HVLP touch-up spray gun ideal for covering small areas and touch-up work
• Working pressure of 43-to-50 psi; air consumption of 5 cubic feet per minute
• HVLP prevents overspray
• Includes brush, spanner, cup filter, and plastic cup
• 1 millimeter nozzle; 1/8-liter cup capacity; 1/4 inch air inlet

I brought this gun because I needed a "one-time-use-cheapo-fill-in" to shoot some small touch-up jobs, while waiting on parts for my more expensive DevilBiss gun.

The gun arrived much as I expected Cheapo packaging Quickly put it together installed the correct air hose adapter, filled the cup with some thinner to check out the fan and noticed that the fan was surprisingly even with dispersal pulling only very-very slightly to one side of the pattern.. But Much better than I excepted for such a cheapo-gun.

The fan is AMAZINGLY Controllable compared to some of the more expensive guns I own and for the 1.mm nozzle it comes with; this gun can put out a LOT of clear or a little in surprisingly wide or narrow patterns.

Shooting clear this gun put on a very nice "glassy flat" and even coat again expectations beat.

I liked this gun so much I actually sprayed a whole job with it after the parts for my DevilBiss arrived and I had my GO-2 gun back together.

This is one of the "fun-est" guns I have very easy to use; not "temperamental", definitely NOT disposable and Definitely worth the money. Obviously It's Not the best gun on the market for the job, but it is a "real" stand-by gun and would be perfect for the hobbyist or DIY Enthusiast who is looking for an easy-to use spray gun which can provide good to near-excellent results.

I gave this a 4 out of 5 just because it Way-beat my expectations and because it delivers real value for money.

Buy Tool Force A-C2 HVLP Touch-Up Spray Gun Now

I have a small body shop and tried this little beauty! Was a confused how this small spray gun would work. Painted my SUV, complete body paint, and was totally amazed by how it worked! Saved quite some paint compared to other HVLP guns, outlasted them!! You can adjust the spray pattern for detailed work or for regular painting pattern.

On the durability issue, I really don't know how much does it last. So far, have painted details, and done 5 complete paint jobs, and works at it best.

Only thing I really didn't like about this beauty is the cup size. It is definetely for detail job, but you can buy a bigger cup and adjust it.

Try it, you won't be disappointed

Today is June 26th, 2011

The durability is amazing! I still have my first spray gun boughted, since I boughted a 2nd one. It hasn't fail still! I am very meticulous with it, so every tiome I finish using it, I clean it very detailed, and I guess this is why working perfect!!!

I have painted 3 complete cars(sedans), and I mean complete!!!

Read Best Reviews of Tool Force A-C2 HVLP Touch-Up Spray Gun Here

I didn't think this tool would work for me because I was planning on trying to use it with Minwax Polyshade which was thick and I also have a very weak $50 compressor (Central Pneumatic 1/3 HP, 3 Gallon). I gave it a shot anyway since it was only $16, to my amazement it worked awesome. I set PSI on the compressor to about 45 and it does turn on frequently to fill the tank back up while i'm working but since I was stopping in between spraying cabinet doors it was not a problem. Extremely pleased with this product.

Want Tool Force A-C2 HVLP Touch-Up Spray Gun Discount?

This detail gun is absolutely fantastic.

After doing much research online pairing my compressor (Makita MAC2400) with an hvlp gun for spraying the finishes I use, I came to the conclusion that I'd be best served with a "touch-up" gun (also known as a "mini" or "detail" gun). I originally wanted an Asturo or Qualspray from Homestead Finishing, but the price was pretty high and I needed something to hold me over while I saved some cash for the more expensive guns. I ran across the Tool Force A-C2 doing an amazon search and was very pleased with the reviews here, and more importantly, the price. Under $20 for a detail gun with all positive reviews? Sign me up for one!

The gun arrived in a very small box; at first I thought something was missing, but packed neatly in the box was everything pictured on the product page. Not included is an in line air/oil filter, so I bought one from amazon as well (SG Tool Aid 99000 Filter Separator). Also not included was a mini regulator, but I just adjust the pressure at the compressor, so I didn't need one of these. After cleaning the gun with mineral spirits and ran some denatured alcohol through it. I was now ready for testing. I use cardboard panels hung on a nail for testing. The finish I used for testing was Zinsser SealCoat (a 2lb. cut of dewaxed shellac). I used this for testing because I use it on pretty much every project I finish in my shop except for those that I paint. I set the pressure at the compressor to 45 psi and then fiddled with the fan pattern, gun pressure and fluid delivery until I arrived at a spray pattern I was pleased with. It didn't take much; a few seconds of adjustment and test sprays on the cardboard and I had the pattern I was looking for: even coverage with no runs or drips. A lot of this has to do with technique as well; I highly recommend Jeff Jewitt's Spray Finishing Made Simple book and DVD set. It goes through everything a new to spray equipment user (like me) would need to spray various finishes with great results.

In use the gun preforms flawlessly. I've used the above mentioned SealCoat as well as Crystalac water borne finishes and am extremely pleased with the results. I haven't sprayed paint with the gun yet (for that I've been using rattle cans), so I can only comment on the experience of those two products. It doesn't take much to get a desirable spray pattern with the SealCoat; since it's a sealer coat and gets sanded anyway, I don't have to be as picky with the spray pattern. I do aim for minimal runs or drips though, as I'd have to apply some extra effort to sand those out.

For the Crystalac though (a great water borne finish; I highly recommend it), I have to be more careful with my settings at the gun. If the pressure is too high, I get orange peel; too low and I get dry spray. Once the gun settings are dialed in, it sprays great and lays down even coats (again, technique plays a big part here; I can't move the gun too fast or slow).

My only gripe with the gun is the cup size. I wish it was a bit bigger (8 oz instead of 4 would be perfect). I manage though. I only spray small boxes and usually only have to refill the cup once for the clear coats.

One problem I had with the gun was my own fault; after disassembling the gun and cleaning it, the next time I went to use it, it was sputtering like crazy. I disassembled and cleaned it again but the problem persisted so I read through the manual and it mentioned this problem, and the cause being the fluid nozzle not being tight enough. Sure enough, I removed the air cap, used the included wrench to tighten the fluid nozzle a bit and replaced the air cap and the gun was spraying beautifully once again.

Not much else can be said about the gun.

It sprays beautifully, disassembles and cleans easily and is a pleasure to use.

I've even put the more expensive gun purchase on hold since this on has been serving my so greatly.

Buy with confidence, and note that you don't need a giant compressor to run it. I imagine even a pancake compressor will have no trouble with this blue wonder of a spray gun.

Save 54% Off

I AM NOT A PROFESSIONAL SPRAYER BY ANY MEANS. THIS IS THE FIRST SPRAY GUN I HAVE EVER OWNED. I BOUGHT IT MAINLY TO SPRAY STAIN ON LARGE OBJECTS. I WAS IMPRESSED ON HOW EASY IT WAS TO UNDERSTAND AND OPERATE. I STRONGLY RECOMMEND THIS TO ANYONE ELSE. IT WORKS GREAT.