New Square D Thermal Overload Heater Element Unit B40 or B-40

• Brand New Square D Thermal Overload Heater Element B-40 / B40
• FREE SHIPPING
• Amp Rating 21.8 - 24.2 AMPS

You get exactly what you want. A square D motor heater! Cheaper than local supply shops. I used in a NEMA 1 Manual starter for an air compressor on single phase electricity.

Save 55% Off

New Paint Sprayer Paint Zoom PZ-001 Paint Sprayer with 3-Way Spray head

• Simple one-touch operation cuts your time and paint cost in half
• Advanced spray technology delivers superior, one-coat coverage
• Reach tight corners and angles with 3-way direct dial sprayhead.
• No Drip application for easy cleanup
• Eliminates the need for roolers, brushes and paint trays

You are drawn to Amazon reviews because you were googling about the product after you saw the TV infomercial on PaintZoom, right? If that's the case give yourself a pat on the back! You are doing great research and you may just have saved yourself $120 and other troubles of testing and returning PaintZoom.

However you find this review, let me just start by saying that if this were such a great product as shown on TV paint professionals would be using it on their jobs everywhere. The reason they are not is that PaintZoom, like many other cheap paint sprayers, is not an airless paint sprayer. In general, paint sprayers come in two kinds; one uses a liquid pump to force the paint onto the surface and the other uses air to push the paint out with an air jet. The expensive and professional kind is the airless one. So what are the big downsides with the HVLP (air) paint sprayer like PaintZoom? First of all, because the sprayer is basically just an airpump with a paint bottle attached to it, it requires that the paint must be thin enough to be lifted by air jet and sprayed out evenly. This is a big deal! The viscosity requirement makes it time consuming to dilute the paint with water and constantly checking its viscosity with supplied viscosity cup. Because if the paint is too thick it won't spray evenly if its too thin it will be runny and wavy under the air jet. I have to tell you that ALL paints and primers have to be diluted tremendously to meet the viscosity requirement. That means that you will have to spray twice or three times to get the same thinkness of coating you would normally do with undiluted paint. Other downsides of such air based paint sprayer include dusty surroundings especially for indoor projects and massy cleanups.

Anyway, you get the picture--its not an effortless, quick solution to your weekend paint project like the TV infomercial would lead you to believe. Paintsprayer for easier weekend projects is a great idea. But I would suggest spending extra $80 to get a $200 airless sprayer.

Buy New Paint Sprayer Paint Zoom PZ-001 Paint Sprayer with 3-Way Spray head Now

Had a small room to paint and was excited to use my new Paint Zoom. It was easy to assemble and started using it right away.

By using, I mean attempting to get the thing to work. It just spit the paint onto the wall. I tried adjusting the nozel and the distance to the wall. It would just not evenly cover any area. I may have covered a square foot in 30 minutes. The machine also got real hot resting on my hip.

It truly is a piece of garbage. I would not recommend even trying it.

Read Best Reviews of New Paint Sprayer Paint Zoom PZ-001 Paint Sprayer with 3-Way Spray head Here

Very diappointing gadget. Uneven coveridge on flat sufaces.Seal between hose and

paint container broke by first use. Very disappointed I gave this Item as Gift.

Also somewhat embarrassing. Dont, know what to do with it now.

Want New Paint Sprayer Paint Zoom PZ-001 Paint Sprayer with 3-Way Spray head Discount?

I contemplated purchasing the Paint Zoom for some time. I'm a brush and roller type of guy. I use a Craftsman Power Painter. I read numerous Paint Zoom reviews and decided to go ahead and try it. Let me tell you right off, don't waste your money or time. It doesn't work period. I believe the company writes most of the reviews. I opened up the package today 3/24/2012 and watched the DVD provided, read through the instructions all which was easy enough. I was painting a bedroom so I taped off the windows and all. That was a pain in itself but nonetheless I was wanting it to perform as advertised. I was using a good quality latex and the instructions said the viscosity should be such that the cup would empty in 50 secs. In 2 Quarts I had to use 4 1/2 viscosity cups of water to thin the paint to empty in 48.7 secs. I tried the Paint Zoom and it spattered, not even at all. I adjusted the flow needle in and out a little at a time. It still gave a really crappy finish. Either the one I have is defective which I strongly doubt or it flat doesn't work as the advertisement show. Plus it's pretty noisy. Made in China, it's really a piece of CRAP! I'm not wasting any more time. Brush and roller. Hell, the time I've wasted, I could have been done by now. I spent over an hour just getting the viscosity right.

I bought this New Paint Sprayer "Paint Z00m PZ-001". It works but it over heats after 10-15min.. All parts are made of plastic. I did less than half of my room with this sprayer... i gave up after 2 hours.. waiting for it cool down.. It would have take less time if I would have painted with a roller.

17.5 CFM 145 PSI TWIN CYLINDER AIR COMPRESSOR PUMP

• 5 to 5.5 HP motor
• Rated pressure: 145 PSI
• Pump speed: 655 RPM to 1050 RPM

Wasn't aware of how much TROUBLE I'd have hooking up the pump to our shop compressor.

Metric flare fittings OUT and made a major project out of trying to get the thing plumbed to our unit.

Left a phone message with the vendor (in So Cal) and never had so much as a return effort.

Would have appreciated a reply even if it was to indicate that we were "on our own".

Finally managed to get it "plugged in" after two weeks of parts shopping, $120 in fittings & pipe, and days of R&D and in house fabrication.

Just got it started today. Seems to be working but makes some knocking noises.

Guess we'll have to wait and see.

Wouldn't recommend it unless its a direct replacement of the same unit or similar with the same fittings.

Buy 17.5 CFM 145 PSI TWIN CYLINDER AIR COMPRESSOR PUMP Now

Not sure who gave it 5 stars, must have been someone from there company. Metric flare output is impossible to find a fitting for. I ended up re-threading it. Once I got it going, it produced about 3 cfm. When I contacted the company they said that was not possible and hung up on me :)

Read Best Reviews of 17.5 CFM 145 PSI TWIN CYLINDER AIR COMPRESSOR PUMP Here

a ++++++ +++ ++ + +++ ++ +++++ + ++ +++ ++ ++ ++ + ++ ++ + + 1

IIT 10200 Air Regulator with Gauge

• Adjustable from 0-160 PSI
• Built-in gauge
• 1/4" NPT Fitting

This does not have an air regulator. It has a simple ball air-valve not providing any air regulation other than open / closed capability.

Buy IIT 10200 Air Regulator with Gauge Now

please do not wast your money on these regulators like i did . unfortunately from looking at the picture they looked like a nice solid unit so bought like five of them. They leak and fall apart save your money go with something else.

Read Best Reviews of IIT 10200 Air Regulator with Gauge Here

be aware!!! it is not a regulator......it is a paddle valve that does not regulate the pressure. I run 180 psi on my main line and wanted to use these for my two finishing guns in my spray booth. It starts the pressure at 180 and then will allow you to adjust it down when in use only, but bumps it back up as soon as you let go of the trigger.

Want IIT 10200 Air Regulator with Gauge Discount?

Nicely made and worth the price. It is really not a pressure regulator but a pressure metering valve. I could do the same with an orifice. To meet my needs I ordered another adjustable spring type pressure regulator.

Iron Horse IHD6160V1 60-Gallon 150 PSI Max Electric Compressor

• No magnetic started needed
• Heavy duty pressure switch has on/off control
• Thermally protected 6.5HP 208/230-volt electric motor
• Efficient heat removal from pulley-fan for cooler running and longer life
• 60-gallon ASME registered tank, 150 PSIG rating

I bought this for my new shop about 3 months ago. Now shop is finished and went to hook it up and the motor is dead on arrival. Going to attempt to get the manufacturer to fix it. Hopefully they are a stand up company.

Ingersoll Rand W040-BOOT Tool Boot for W040 1/4-Inch Impactool

• Vibration-damping impact drive boot for the W040 impact tool
• Provides added ergonomic comfort by absorbing vibrations
• Protects the tool from dirt, grim, wear and tear, and accidental external damage
• Easy-to-see color
• 1-year limited manufacturer's warranty

Fit perfect!***** This is a must for the protection of your tool. If you are like me when I do the dredad work the tool and I are all over the ground or floor.

Buy Ingersoll Rand W040-BOOT Tool Boot for W040 1/4-Inch Impactool Now

If you have the tool you realy shoukld spend the extra couple of dollars and look after it.

I just wish all tool makers would do similar extra's.

GOODYEAR 46542 3/8-Inch by 50-Foot 300 PSI Rubber Air Hose

• Solid Brass End Fittings: 1/4-Inch NPT (M)
• Spiral Synthetic Yarn Reinforcement
• Abrasion-Resistant Rubber Outer Jacket
• 100% Made and Assembled in the USA
• 10 Year Guarantee

What can I say. It's a rubber air hose that seems to be of top quality. I live in Syracuse NY where is get's cold as hell and the hose doesn't seem to suffer from getting two stiff like no rubber hoses do.

Buy GOODYEAR 46542 3/8-Inch by 50-Foot 300 PSI Rubber Air Hose Now

This Good Year 3/8" yellow hose seem to be just what the Dr. ordered. Outer cover seems to be thicker than the other ones. So far I'm pleased and it really does seem to be Good Year.