GOODYEAR 46565 1/2-Inch by 50-Feet 300 PSI Rubber Air Hose With 1/2-Inch MNPT Ends and Bend Restrict

• Solid brass end fittings: 1/2-Inch MNPT
• Spiral synthetic yarn reinforcement
• Abrasion-resistant rubber outer jacket
• Bend restrictors prevent kinks near end fittings
• 100-percent made and assembled in the use

Both ends leak where they are attached. Hose seems to be good quality but the sleeves that crimps the hose to the ends are not heavy enough.

Buy GOODYEAR 46565 1/2-Inch by 50-Feet 300 PSI Rubber Air Hose With 1/2-Inch MNPT Ends and Bend Restrict Now

Purchased for out Diesel Mechanic shop and it is exactly what we wanted! The price was just right for us and we couldn't be happier! Thank you!!!

Read Best Reviews of GOODYEAR 46565 1/2-Inch by 50-Feet 300 PSI Rubber Air Hose With 1/2-Inch MNPT Ends and Bend Restrict Here

I live in a cold climate and this hose always stays supple. Good quality. I would highly recommend this product.

Want GOODYEAR 46565 1/2-Inch by 50-Feet 300 PSI Rubber Air Hose With 1/2-Inch MNPT Ends and Bend Restrict Discount?

what can i say, its an airhose, doesnt leak, its flexible, and im sure it will be even when it gets cold. (as advertised) I lose hardly any pressure due to the larger size even with 2 hoses connected (100') I do recommend getting a smaller six foot whip to connect to your tools and a hose roller upper.

Save 44% Off

This hose is great, heavy duty and the ends are crimped on very well. The hose end protectors are a great feature and protects the hose and what ever it comes into contact with. The hose seems to be made to last a long time. We use three of these in a mining equipment shop on hose reels and then have been working well for 6+ months.

Porter-Cable PCFP12234 3-Tool Combo Kit

• 6 gal, 150 psi compressor allows users to drive a large quantity of nails on a single tank charge
• FN250C; 16ga 2-1/2-Inch Finish Nailer
• BN200C;18ga 2-Inch Brad Nailer
• NS150C; 18ga 1 1/2-Inch Stapler
• 25ft of 1/4-Inch air hose with a coupler and plug

This product exceed my expectations, Delivery in a flash,well packaged,seems to be of real good quality as well.Ordered on Wednesday mid-morning and arrived at my house within 48 hours.Job well done Amazon,UPS.

Read instructions,fired that Baby and droved several nails with all three nailers with no miss-fire. I believe this combination will be a pleasure to use while building our new house next Spring.

Can't beat Porter Cable tools,by the way,all of my power tools are Poter Cable brand and they kept me trouble free for the past several years working as a finishing Carpenter on several job sites.

Thanks Amazon and Porter Cable for a job well Done !!!

I will report next Fall after completing our new home !!

Buy Porter-Cable PCFP12234 3-Tool Combo Kit Now

I should say up front that prior to using this product I had never used a nail gun or an air compressor. As a newbie, it was very easy to setup and within 20 mins of opening the box, i was nailing my quarter rounder to the base board. Ive used each of the nail guns and they worked jam free. I'd definately recommend this to a friend.

Read Best Reviews of Porter-Cable PCFP12234 3-Tool Combo Kit Here

Although I can't comment on the reliability of this kit since I've only used it a short time, I have been pleased with the performance so far. The nail guns have plenty of power to sink all recommended sizes of nails and staples into even the hardest wood. The compressor is loud, but no louder than comparable models. On the plus side, the compressor is only 30 lbs, which is 4 lbs lighter than some of the earlier models. Also, the compressor (Model C2002, Type 8) that came with my package does not require a break-in procedure, which some earlier models did. (The instructions with some models warn that a break-in procedure is "Mandatory". Not so with this model.)

The only slight disappointment was that the nail guns don't come with a "Bump" feature that allows you to rapidly shoot nails by just holding the trigger and "bumping" the wood. I discovered that, for safety reasons, Porter Cable only ships the guns with the red trigger assembly, which indicates it is for sequential fire only and cannot fire in "bump" mode. You can order the black trigger assembly from Porter Cable if you want to convert to bump mode. It's an easy swap, but you have to wait to get the part from PC. I would have liked to see PC include the black trigger assembly (as an optional "accessory") with the package so that I could make the swap without having to order the part and wait for it to arrive.

All things considered, I'd recommend this combo kit to a fellow DIY'er.

Want Porter-Cable PCFP12234 3-Tool Combo Kit Discount?

The compressor is great Enough for small jobs. You can drive ~25 nails using the 16G finish nailer at 90 psi before the compressor cycles. More than enough for woodworking or jobs around the house. You could probably use an impact wrench for short bursts, but putting on a tire would probably require a few short breaks. It is noisy, but actually pretty good when compared to others that I have used.

The nail guns and stapler are great. This is a slightly more expensive kit than the one Home Depot is selling, but these guns all have 1/2" extra throw than the cheaper kit, making it worthwhile for the added flexibility. 2 1/2" is nice to have when you want a nail to find a stud behind some drywall through shelving. The adjustment screws provide a wide rangelow enough for soft pine and hard enough for oak. The guns themselves have magnesium housings so they are really light, although most major brands have similar weights.

The packaging for shipment was pretty poor (due to Amazon, not Porter Cable). The manufacturers box was thrown in a bigger box with some paper padding, and it was banging around all over the place. Everything arrived fine, but this isn't normally the kind of quality packaging Amazon is known for. On a positive note, a 55lb package with free 2 day shipping from Amazon Prime is pretty awesome!

Save 51% Off

Unit was well packaged and shipped as promised. Thank You to Amazon for that. This unit has worked well for me. I am not a contractor and for my needs it exceeded my expectations. The compressor is somewhat noisy when used inside. However, for the price, capacity and pressure produced I am satisfied. All three of the guns perform very well. I had no trouble adjusting the guns to seat flush or to countersink staples, brads or nails. I had a couple of jams when I first used the guns, but I believe that it was faulty technique as opposed to issues with the guns themselves. The unit is very portable. I did not think that the unit ran overly much considering I was driving a lot of staples in a hurry. Overall I think that the unit is a good product for the home handyman, and woodworker.

Mintcraft FDQ910 Air Inflation Kit 4 Piece

• "MINTCRAFT" INFLATION KIT
• Air Inflation Kit Piece of 4
• Kit contains inflation adapter, tapered inflation nozzle, inflation needle, tire nozzle.

I purchased this set for the tapered inflation nozzle. It fits nicely into a pilates ball. The nozzle and the basketball needle are the same size. You should note that, when using this with a standard bicycle pump, you have to push down the lever on the pump to lock them into place. It looks as though these pieces screw in, but they do not on my pump. I have tried to measure these as accurately as possible and will list them in order that they appear in the picture.

Basketball needle: 1/4 inch

Tapered nozzle: 1/4 inch

Inflation adapter: 5/16 inch both ends

Tire nozzle: 5/16 inch

Interstate Pneumatics LF10-4H-HP Pressure Switch - 1/4 FPT Four Port - Bend Lever Swicth - 175 PSI

• 1/4 NPT female connection
• 6.3 mm unloader valve connection
• Cut off pressure 135-175 PSI
• Amperage Rating 20 Amps
• Short and Bend lever switch

The 90 degree angle on the air feed to the tank didn't work for my compressor. Original part didn't have a bend new one did. had to add another fitting to be able to connect the line to the tank.

Adjustments aren't that easy trial and error but it works. weakest link is a rubber bladder glued to steel manifold. Then that glue gives the unit won't shutoff at the right pressure. Old one lasted 5 years hope this one does too.