33 Bottle Compressor Wine Cooler

• Temperatures reach as low as 39 degrees F
• Holds 33 bottles of wine
• Insulated glass door
• Digital temperature display
• Slide out chrome shelves

The good

Not cellar grade cooler for long term storage. Instead it great cooler for keeping your reds at the right temperature for several months instead of keeping them warm, and then trying to chill them to serving temperature in the fridge before serving.

Shelves are removable, so I took out three shelves. This left room for 10 horizontal standard bottles of wine, 4 horizontal large bottles of wine, and 4-6 vertical (open) bottles of wine and/or liquor.

No fans to circulate and make noise.

The not so good

rear "feet" are just stamped metal protrusions from the base, so you may want to get carpet/floor protectors.

The condenser coils are on the sidewalls and get slightly warm to the touch, so it appears that space needs to be left on each side for ventilation.

Power cord is too short. Compressor pitch is a strange pitch compared to the normal fridge, but is fairly unobtrusive.

Summary

Great value, good starter cooler for the money, especially considering it includes shipping. I would buy another for whites if I drank white wine.

Buy 33 Bottle Compressor Wine Cooler Now

The pros; it's a compresser type fridge. It keeps wine much colder than then electro type. Nice fit and finish.

The cons; it's not "Energy Star" rated and it shows once a month! my electric bill went up 20.00 a month That with keeping the themostat at 58. Another problm is noise. When the compressor is on... not good.

Is it worth it? Well if one entertains alot. It adds a touch of elegance.

Read Best Reviews of 33 Bottle Compressor Wine Cooler Here

After reading lots of reviews on the passive chillers, I decided on this model with a compressor. It requires very little air space around the unit to maintain cooling capability which was very important for it's final placement. The compressor does make enough noise to be heard. It is quieter than our full size fridge. Temperature seems to hold very consistent and it recovers quickly after the door is opened. The only negative is that the blue interior LED light turns off automatically after a few minutes. My we liked the way it looked with the blue light on.

Want 33 Bottle Compressor Wine Cooler Discount?

I purchased the unit 10 months ago. Last week the compressor stop working. I contacted the NewAir customer support and they explained that I have to ship the product back. Really !!! Where I am going to find box suitable to ship the unit? I proposed to have a new unit shipped and I will return the old one in the packaging, but they explained that this can't be done. It is too much hassle. I will throw it away and will never buy anything from NewAir again.

I should listen to the negative reviews in the first place.

Save 38% Off

Don't take a chance with this company. I ordered this product based on the positive reviews on Air & Water's website. The unit arrived quickly but upon opening it I found that the gasket on the door did not create a tight seal around the frame there was a huge gap at the top outer corner that would allow warm outside air enter the unit, resulting in more costly, inefficient cooling. I tried stretching it and playing around with it but no luck.

While not ideal, these things happen no biggie. So I called A&W to send a replacement, and they were actually very accommodating and sent a new unit right away. They instructed me to use the box from the replacement to send back the defective unit (they provided a prepaid shipping label for the return). I therefore tossed the packaging supplies from the first unit (the box had been cut open anyway to take it out).

The second unit arrived a week later, and I was excited I finally had somewhere to store my wine. No dice! There was a huge dent on the door. There is no way that this damage occurred during the shipping process as all of the packaging (foam, box, etc.) was completely intact with no bends or holes. I can only assume that this defect existed at the time it was shipped.

I read a lot of reviews for a lot of products, and I'm not sure I've ever seen a company fail to send a good condition product when given not one but two chances. Air & Water/NewAir clearly does not have a proper quality assurance process in place. Both of these units had blatant defects that should have been detected prior to distribution. With the first unit, I thought it was a fluke. Upon receipt of the second, it's no coincidence this company simply lacks basic controls.

To add insult to injury, in order to receive a refund I was told that I am on the hook for purchasing a box and packaging supplies to send back the second defective unit. A&W would not reimburse me for the cost nor send supplies to me. Between emails, phone calls, taking pictures of defects, arranging fedex return pickups, and now the cost of packaging supplies, this has been a major hassle. Don't waste your time.

Incidentally, after doing some digging I found that Air & Water owns NewAir no wonder NewAir's product reviews are so positive on the A&W site but just mediocre everywhere else.

Porter-Cable PCFP12234 3-Tool Combo Kit

• 6 gal, 150 psi compressor allows users to drive a large quantity of nails on a single tank charge
• FN250C; 16ga 2-1/2-Inch Finish Nailer
• BN200C;18ga 2-Inch Brad Nailer
• NS150C; 18ga 1 1/2-Inch Stapler
• 25ft of 1/4-Inch air hose with a coupler and plug

This product exceed my expectations, Delivery in a flash,well packaged,seems to be of real good quality as well.Ordered on Wednesday mid-morning and arrived at my house within 48 hours.Job well done Amazon,UPS.

Read instructions,fired that Baby and droved several nails with all three nailers with no miss-fire. I believe this combination will be a pleasure to use while building our new house next Spring.

Can't beat Porter Cable tools,by the way,all of my power tools are Poter Cable brand and they kept me trouble free for the past several years working as a finishing Carpenter on several job sites.

Thanks Amazon and Porter Cable for a job well Done !!!

I will report next Fall after completing our new home !!

Buy Porter-Cable PCFP12234 3-Tool Combo Kit Now

I should say up front that prior to using this product I had never used a nail gun or an air compressor. As a newbie, it was very easy to setup and within 20 mins of opening the box, i was nailing my quarter rounder to the base board. Ive used each of the nail guns and they worked jam free. I'd definately recommend this to a friend.

Read Best Reviews of Porter-Cable PCFP12234 3-Tool Combo Kit Here

Although I can't comment on the reliability of this kit since I've only used it a short time, I have been pleased with the performance so far. The nail guns have plenty of power to sink all recommended sizes of nails and staples into even the hardest wood. The compressor is loud, but no louder than comparable models. On the plus side, the compressor is only 30 lbs, which is 4 lbs lighter than some of the earlier models. Also, the compressor (Model C2002, Type 8) that came with my package does not require a break-in procedure, which some earlier models did. (The instructions with some models warn that a break-in procedure is "Mandatory". Not so with this model.)

The only slight disappointment was that the nail guns don't come with a "Bump" feature that allows you to rapidly shoot nails by just holding the trigger and "bumping" the wood. I discovered that, for safety reasons, Porter Cable only ships the guns with the red trigger assembly, which indicates it is for sequential fire only and cannot fire in "bump" mode. You can order the black trigger assembly from Porter Cable if you want to convert to bump mode. It's an easy swap, but you have to wait to get the part from PC. I would have liked to see PC include the black trigger assembly (as an optional "accessory") with the package so that I could make the swap without having to order the part and wait for it to arrive.

All things considered, I'd recommend this combo kit to a fellow DIY'er.

Want Porter-Cable PCFP12234 3-Tool Combo Kit Discount?

The compressor is great Enough for small jobs. You can drive ~25 nails using the 16G finish nailer at 90 psi before the compressor cycles. More than enough for woodworking or jobs around the house. You could probably use an impact wrench for short bursts, but putting on a tire would probably require a few short breaks. It is noisy, but actually pretty good when compared to others that I have used.

The nail guns and stapler are great. This is a slightly more expensive kit than the one Home Depot is selling, but these guns all have 1/2" extra throw than the cheaper kit, making it worthwhile for the added flexibility. 2 1/2" is nice to have when you want a nail to find a stud behind some drywall through shelving. The adjustment screws provide a wide rangelow enough for soft pine and hard enough for oak. The guns themselves have magnesium housings so they are really light, although most major brands have similar weights.

The packaging for shipment was pretty poor (due to Amazon, not Porter Cable). The manufacturers box was thrown in a bigger box with some paper padding, and it was banging around all over the place. Everything arrived fine, but this isn't normally the kind of quality packaging Amazon is known for. On a positive note, a 55lb package with free 2 day shipping from Amazon Prime is pretty awesome!

Save 51% Off

Unit was well packaged and shipped as promised. Thank You to Amazon for that. This unit has worked well for me. I am not a contractor and for my needs it exceeded my expectations. The compressor is somewhat noisy when used inside. However, for the price, capacity and pressure produced I am satisfied. All three of the guns perform very well. I had no trouble adjusting the guns to seat flush or to countersink staples, brads or nails. I had a couple of jams when I first used the guns, but I believe that it was faulty technique as opposed to issues with the guns themselves. The unit is very portable. I did not think that the unit ran overly much considering I was driving a lot of staples in a hurry. Overall I think that the unit is a good product for the home handyman, and woodworker.

Solberg FS-10-075, Miniature Filter Silencer/Breather for Compressors & Blowers, 3/4" MPT,

• Increase lifespan of equipment
• Reduce noise levels
• Decrease maintenance costs

I bought these based on feedback on other sites/forums anticipating a reduction in the intake noise of my Puma 3 cylinder compressor. To me there was no difference from the standard Puma filters which by design are fairly quiet. I still got a much better filter out of the deal, just didn't get the noise reduction I expected.

TEKTON 4570 Brass Air Regulator

• Controls Air Flow to Fine-Tune Performance of Sanders, Spray Guns and other Air Tools
• Easily Change Air Flow by Adjusting Thumbscrew Value Control
• Solid Brass Construction
• Specifications: 1/4-Inch NPT Inlet by 1/4-Inch NPT Outlet
• 90 Day Guarantee

This is a good add on to the air tool for slowing down a drill. Used it while drilling hard metal on vehicle frame .

Buy TEKTON 4570 Brass Air Regulator Now

I'm cheap. I have a cheap air drill that works great but does not have a variable trigger. As a result I keep burning up drill bits.

I'm also impatient so even if I did have a variable trigger I would constantly fight the urge to go at it full speed!

I purchased this along with a good set of bits so I can better control the speed of my drill. So far so good! I can turn the pressure down and just stay full on the trigger and not have to worry about burning up bits any more!

And the price is right too!

Read Best Reviews of TEKTON 4570 Brass Air Regulator Here

Does not shutoff air completely when fully closed. Compressor tank does not hold any air within a few minutes after it is shut off.

Ramsond CRN-45 7/8-Inch to 1-3/4-Inch Nails Coil Air Roofing Nailer

• Operates with a 60 to 110 psi standard air compressor; equipped with a standard male 1/4-inch 18 NPT air inlet
• Fastener type: 11-gauge nail (3/4 inch to 1-3/4 inches); Nail capacity: 120
• Trigger-actuated mechanism automatically positions and drives nails
• Minimum operating pressure: 60 PSI; maximum operating pressure: 110 PSI
• Composite gaskets, seals and rings with Ergo-Grip cushioned comfort

I own and use just about every kind and brand of air nailer for a remodeling business. This roofing nailer ranks with the brand name tools at half the price. I installed asphalt shingles for 3 days without encountering a single jam. It comes with quality plastic case and adequate instructions.

Buy Ramsond CRN-45 7/8-Inch to 1-3/4-Inch Nails Coil Air Roofing Nailer Now

First off, the shipping was super fast. I ordered it on Sunday and got it on Thursday, from Michigan to Oklahoma. Not bad for standard ground shipping. The instructions were very easy to understand and follow. The nailer itself seems to be pretty good quality for a Chinese import. The gun has a nice paint job with the logos being stickers. (note to Ramsond, get your manufacturer to paint the logo on) After loading some nails and putting a few drops of oil into the air inlet, I set the trigger to "bump" mode and tested it out. After playing "machine gun" on a 2X4 for a while, not one misfire and all of the nails were driven at a consistent depth.

Update: I used this nailer on a roof job. Worked fine. Then later I pulled it out again to nail down tile backer. First off I noticed that the bump fire selector wasn't there anymore. Don't know when it broke off. It seemed to work fine though, until I pulled the trigger and a nail shot out. Without the nose being pushed in. Pretty dangerous.

If I had to do it over again, I would wait until the Harbor Freight nailer came on sale then printed out a 20% off coupon. (do a search, they always have them)

Read Best Reviews of Ramsond CRN-45 7/8-Inch to 1-3/4-Inch Nails Coil Air Roofing Nailer Here

Had a roofing job coming up so I read reviews and ordered the nailer for 2nd day delivery. Arrived on time in good shape. We got 2 squares of shingles down and the nailer shot a nail right through the feed ramp rendering the tool useless. Finished the job (27 square)with a Bostich RN46-1.

Advice Spend the extra on a professional tool

Hats off to Amazon they promptly refunded my money plus shipping both ways Thanks

Want Ramsond CRN-45 7/8-Inch to 1-3/4-Inch Nails Coil Air Roofing Nailer Discount?

This was the best i've spent in a while. We did a large roof on the house, then my son and his in-laws did a large garage roof. No problems at all. On occasion the bump feature would double fire, but not too surprised about that.

Thanks, Amazon

Save 19% Off

I was hesitant to buy this at first since this is not a well-known brand like Dewalt. But with good reviews online for other Ramsond products, and a price below even well-used older nailers on Craigslist, it was worth a try.

I have now completed an entire roof installation using this nailgun. It works perfectly no jams, no misfires, easy loading, feels great in the hand, and perhaps even a bit quieter than the other roofing guns I have used (Dewalt, Porter Cable, Bostitch and Hitachi). Mechanically it looks almost identical to these other guns, right down to the rivets.

I am a house builder by trade, and I will definitely be looking at the other Ramsond tools as I need replacements over time.

UPDATE: Three years later, I still use this machine as my sole roofing nailer. I've lent it out to other builders, and reshingled an additional 5 roofs with my own hands. It continues to kick butt, making me feel pretty smart for choosing this one over a Dewalt at 2-3x the price!

Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler

• Uses standard SencoType, 22 ga. 3/8-inch crown staples from 1/4-inch to 5/8-inch long
• Small and lightweight for ease of operation
• 1-inch nose extension for limited clearance fastening
• Steel top cap for durability
• Rear exhaust port channels air and tool oil/condensation away from user;Driver guide moves back with magazine, allowing jams to be easily cleared when magazine is open

Light and effective. It does its job as well as I could have hoped. Not a single jam that was not obviously my fault. I have spent several times the cost of this tool looking for a stapler that would do what this one does as well as it does. Why the enthusiasm? Well, most staplers not meant for construction site abuse are not very good. This one is.

A word of caution. This is not, nor was it ever intended to be, a construction stapler. The staples it is designed to use are not big enough nor thick enough to be of much use for construction site purposes. This is a professional grade upholstery stapler.

Buy Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler Now

This gun is very comparable to other industrial upholstery staplers in features, design and quality, but it is considerably less expensive.

Since this is an upholstery stapler you can get staples from any upholstery supply shop. A hardware store will not carry them. When you go to your local upholstery supply shop ask for staples compatible with Empire 7, BeA 71, Bostitch BA71, JK 670, Rainco 7, or Senco C series staplers. Amazon's price for replacement staples is good considering they are galvanized, but you can get liquor finish staples cheaper at your local store. Many will carry stainless steel staples as well.

This stapler does not come with a case because it is an industrial tool. Upholstery shops do not bother putting their tools in boxes at the end of the day. Also upholstery shops don't make a lot of saw dust, at least not in the fabric part of the shop. For those using this stapler in a general purpose shop, a case would be nice but, as mentioned, one is not provided. The parts list mentions an optionally available case which can be purchased from your local factory service center for less than ten bucks.

Read Best Reviews of Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler Here

I bought this stapler to re-cover the vinyl pillions and seats on my boat. And, approximately 8,000 staples later, I can say with certainty that it is definitely the ideal tool for any type of upholstery work. It's light, easy to hold, has an extended nose to get into tight spaces, and is powerful enough to completely sink the staple through several layers of fabric, even into hardwood. It's also extremely easy to re-load, and I've never experienced any type of jam or mis-fire. Construction is typical Porter-Cable (my personal favorite brand), meaning it appears to be built super tough--I expect it to last a lifetime.

So then, why only 4 stars? Unlike any other pneumatic 'nail gun' I've seen, this stapler does not have a safety tipped nose. Usually, the nose has to be pressed against something in order for the trigger to be functional. But, with this one, there is no safety tip--you just pull the trigger and it starts firing. Add to that the fact that the trigger is very sensitive, and you have a potential safety hazard.. In normal operation, these two things make it easier to get the job done, but at too high of a cost to safety (in my opinion). You might be guessing that I am trying to blame the tool for a goof up, and you'd be right. I ended up shooting myself in the index finger with this stapler. It was not a major ordeal, it just hurt for a few days, but I realize now that normal nail guns have those safety tips for a good reason. Buy the stapler, but be careful!

Want Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler Discount?

This Porter Cable upholstery stapler is as comfortable to use, as it is to buy; great price point. I did buy it with the intention of using it for attaching fabric to seat bottoms, and I have some early French provincial furniture that will need reupholstering. What I found was that it is usable for a lot of other things as well. I make cabinetry. In order to transport the finish pieces, I use the single sided corrugated cardboard, which is inexpensive to wrap it. These staples work great to attach the cardboard to the back seam of the cabinet. This stapler will take up to 5/8" staples. I didn't find them here at Amazon so I bought up to the 1/2" size. They are wider than the narrow crown staples.

The stapler fires well without any misfires since I have been using it. It doesn't have a safety plunge mechanism, as do the finish nailers. That enables you to get into tight corners whereas the tip is a lot smaller.

The only downside is that it does not come with a case, and I did not find staples for it available locally. All in all it is a very nice tool. Highly recommended.

Save 45% Off

Nice stapler. Very easy to use, compact and heavy duty. No depth adjustment collar or thumbscrew to fiddle with, just change your air pressure setting and keep on going. Securing thick, heavyweight upholstery material onto hard wood furniture frames repetitively is a breeze.

Assuming that you already own a small portable compressor, and don't mind dealing with the air hose, I personally feel that the US58 is a better and much less expensive alternative to a true professional grade electric upholstery stapler and with only minimal care, will probably last much longer.

For some reason, there is no carrying case included with this stapler. I was able to purchase one though, through the Dewalt/Porter-Cable service net website for about eleven dollars plus freight [Part #891602]. It is just a small case similar to the one that came with my PIN-100 pinner, but it definitely makes it much easier to transport and store this tool along with maybe a dozen or so assorted sizes of staple strips.

The B&C Eagle staples that are sold here on Amazon are good quality, but I find that the Porter-Cable brand staples sold elsewhere are every bit as good and are also less than half the price for the same ten thousand count boxes.

Overall, I really like this PC stapler and have no problem recommending it to anyone who is looking to purchase this type of tool.