Campbell Hausfeld MP2847 17-pc 1/4-in Air Tool And Accessory Kit

• Great companion to new compressor
• Includes variety of couplers and plugs
• Blow gun for cleaning
• Durable set for thousands of cycles of usage
• Includes tire gauge

I pruchased this mainly for the blower attachment, but all the other accessories work well. Its not top of the line, but for just using it around the garage and doing light stuff, the tools will hold up fine.

Buy Campbell Hausfeld MP2847 17-pc 1/4-in Air Tool And Accessory Kit Now

Not a bad set. I bought this set to replace leaking brass fittings and it does the job. The price was right, although they weren't Campbell Hausfeld brand. I was careful about tightening the fittings on the blow gun because it felt "spindly" to me. I take good care of my tools, so it works for me.

Read Best Reviews of Campbell Hausfeld MP2847 17-pc 1/4-in Air Tool And Accessory Kit Here

Thanks for a good product. Not sure how much i can wright about such a basic product. This product is great and i haven't had any problems. I would have been willing to pay more for something to throw the parts into. Just a thought

Want Campbell Hausfeld MP2847 17-pc 1/4-in Air Tool And Accessory Kit Discount?

I already tried few pieces of this set, they work fine so far. I will follow up on comment when try I'll them all.

Save 23% Off

It has fulfilled all of my needs and more, the quality is what I had expected. It should last as long as I need.

220 PSI Pistol-type Lock-on Air Chuck with Dial Tire Gauge w/ Flexible Hose

• Comfortable rubber protected 2in gauge that measures ( 10 to 220 PSI
• 1ft flexible hose
• Brass lock on air chuck
• ¼in. NPT air inlet

It works like i expected it to but the guage gives you a close reading maybe +2 lbs; the lines are just too small to accurately guage the pressure.

I use it to get close to what i want to fill at and then use a digital air pressure gauge to get an exact reading and adjust.

Good product for the money

*****Update September 2012, I had this for 2 years and it worked, but the other day I used it and dropped it and the metal cracked and rendered it useless.

Buy 220 PSI Pistol-type Lock-on Air Chuck with Dial Tire Gauge w/ Flexible Hose Now

Gauge reads super accurate for me, definitely within 1-2psi (who needs more accuracy than that?). This product allows you to lock onto the tire valve and fill to the exact air pressure desired without removing the chuck from the valve to measure psi. Made in China is disappointing but you can't beat the price. I got this specifically because it measures over 100psi, which is nice if you're filling up road bike tires.

Read Best Reviews of 220 PSI Pistol-type Lock-on Air Chuck with Dial Tire Gauge w/ Flexible Hose Here

The only criticism of this air chuck is that the pressure gauge goes to a very high number 150 psi I believe. This makes the sensitivity of reading "normal" tire pressures from 1-30psi tough to measure. Unless you are filling Catepillar industrial tires you don't need the gauge to go that high.

I may look into replacing the gauge itself.

The hose locks on well, pistol grip performs perfectly and it has a nice air release valve for de-pressurizing tires if you overfill.

Want 220 PSI Pistol-type Lock-on Air Chuck with Dial Tire Gauge w/ Flexible Hose Discount?

Not a whole lot to say on this.

It connected up nicely to the hose and it fills the bike and car tires without problems. I've used worse at the actual gas stations, so i'm pretty happy with this, especially for the price. I would buy again.

This thing is a great idea, but total junk! I bought this, thinking It would be easier to inflate tires with it, but instead I got a Very leaky, Very cheap piece of junk. The 'Quick-Connect' end of it is very flimsy and the spring in it is very weak. It pops off the stem constantly, and you have to hold it tight the whole time you are using the inflater. This defeats the purpose of even having the quick-connect end.

Ingersoll Rand R37121-600-VS 250 PSI MAX 1/4-Inch Regulator, Black

• 1/4-Inch NPT
• 0-140 PSI Pressure Range
• Flush-mount gauge
• Relieving - standard knob control
• 59 CFM

This may well be the best regulator I've seen. If I have one complaint, it's that the gauge seems small. That's no surprise, though. It's integrated into the regulator, and the whole block is rather small. Even so, it's a small complaint. Everything is well-marked and legible, and I am most impressed with everything else about it.

I use a 30-gallon, oil-lubricated automotive compressor to run an airbrush. This is probably overkill, but for 5 minutes of noise, I get 2-3 hours of quiet work time. Unfortunately, my compressor has been eating regulators at the rate of one a year, though the last one only lasted 2 months. They work fine at 40 lbs, and may even work well at higher pressures. But sooner or later, when I run the pressure up to 80 or 90 lbs to fill a tire, the thing fails. As you may know, a regulator usually costs $20 to $60. It's a bother.

The regulators I've bought at the Big Box stores seem really cheap. Their performance has been lackluster with several pounds of pressure loss when I actually start spraying. I've had replacement regulators fail right out of the package, too. Not good! With respect to most of the actual failures, I've since learned that it is extremely important to raise and lower the pressure slowly more slowly than I've been doing it. Raising and lowering the pressure too quickly puts undue stress on the springs and seals. But the pressure and quality issues are still a bother, and I still needed a new regulator. So, I chose this one because I-R is a respected brand, this looked well-made, and the price was right.

I'm happy to report that this is an outstanding piece of hardware, and apparently bargain priced. Other sites want $40 to $50 for the same unit. First, this has a very handsome, modular design. Second, all the parts seem well-made and fit together nicely. To adjust the inner range band, you do need to carefully remove the front housing, It snaps off and reveals the gauge assembly. Then, you move the yellow arrows as desired to set your pressure range. You pop the housing back into place and all is good. If you want the pressure knob on top, you remove the housing, remove a couple screws, carefully turn the gauge assembly 180 degrees, replace the screws, and replace the housing. Done!

Once installed, I found the regulator has very little pressure drift maybe a pound or two. Very Happy! Visiting the I-R site, I found that the company recommends putting a dirt & water filter between the air source and the regulator. No stock consumer compressor I've seen has this, and I've noticed buildup of contaminants in a couple of my worn regulators. So, this seems prudent and I will soon install a good filter unit to better protect my regulator.

I recommend this as a very good, bargain-priced replacement regulator. I expect this to perform better and last longer than any other regulator I've tried. I will try to post updates over time. Thanks for reading.

Buy Ingersoll Rand R37121-600-VS 250 PSI MAX 1/4-Inch Regulator, Black Now

This is a small and light weight air regulator with 1/4 NPT fittings. I'm using it on my home garage compressor (150PSI Max 5.4CFM @90 from HF). It seems to be holding up and doing it's job. I use the setup probably once to twice a week. It is hooked with a filter, T fitting (for full pressure feed to cleaning hose) and NPT quick conects. This is not the type of unit that you want to be mounting to the wall (although you could) expecting heavy use out of. So far so good. I figured for the price I could give it a shot. Also using the Matching filter.. it works as well. Four stars because it is very 'light duty' and feels like I could break it without a lot of effort. This is being use with Air Tools like impact wrenches, rachets and grinders. Could feel a little more solid.

Read Best Reviews of Ingersoll Rand R37121-600-VS 250 PSI MAX 1/4-Inch Regulator, Black Here

Have been using this for a couple months now and no problems so far. I'm not a heavy user at the moment but basically once or twice a week, so far it has held up. Construction seems pretty decent.

Want Ingersoll Rand R37121-600-VS 250 PSI MAX 1/4-Inch Regulator, Black Discount?

I bought a cheap compressor that had a cheap regulator. The regulator would drop pressure by at least 20-30 lbs as soon as I turned on the air tool. I replaced the regulator with this Ingersoll Rand regulator. It now only drops less than 10 lbs when I turn on the air tool. It drops pressure because I have a water filter down the line which is a little restrictive. I highly recommend this item for a small compressor.

Save 2% Off

I installed this regulator on a Rol Air JC10 after the factory regulator broke. It is quite simple and just has an in and an out port that fits 1/4" NPT connections. The built in gage works just fine, but is a hair on the small side. Being that the unit is compact, there isn't much way around that though. You can switch so that the adjusting knob is on top by switching the gage to the other side and flipping it over. It just requires removing a few screws. The adjusting knob clicks in and out to lock and unlock. The gage has an upper and lower yellow band that you can set to the desired value. This can help so you don't have to get close enough to read the small numbers. I would buy it again. It feels solid and works great.

Alemite 339804 12 Volt Spare Battery, Ni-Cad, Rechargeable

• This is a 12 volt replacement battery
• The rechargeable battery is for use on model 575 only
• Square connections on the side of the battery, connects battery to gun
• Comes with a one year warranty
• Fits the 575A and 575B cordless grease guns before 10-31-2009

This is the 3rd battery i have bought here.They do not seem to hold charge for very long.Not sure if these are brand new or reconditioned?? But I'm happy with them for the cost about half than getting from store!

Save 41% Off

3" HIGH SPEED AIR CUT OFF TOOL

• Speed: 20,000 RPM
• Tool Length: 6-3/4"
• Metal Safety Guard
• 4 C.F.M. At 90 P.S.I

I have a $69.00 Sears Mastercraft air cutter -bought this cutter for a cheap reserve.$ 10.00 its impossible to go wrong -right??

Well this comparison did not go according to plan.

The plan?? Use the cheapee then ,junk it,, the war is over!!

Unfortunately no one would ever guess--this air ccutter rocks !!

Its does evertything the Craftsman does --just as good ,,

just as fast!!

Some slight differences , the Sears craftsman air cutter has a see through plastic , plastic debris deflector.This 3 inch cutter does not, its deflector is light grade metal .You can rotate both deflectors to a given position to save your hands and eyes.Use a face shield!!

Will this inexpensive last as long as more expensive cutter? I am a do it selfer..have a garage .

My air tank is a 33 gallon vertical unit ,, both tools ran well off this capacity. Both cut well for my needs this tool cuts cuts like an inmate given a file cake !! Fast ,easy to handle , if I was a every day mechanic this would be in my tool kit. as its easy to manage,,cuts anything I can give it!@!!Also easy to control the speed, has plenty of torque!!PLenty!!

What a surprise!!Its slightly easier to handle than the SEARS as its a smaller diameter.

What we need is some of you pros get this tool ,,use it daily lets see how well it stands up to daily use.

For my needs ,,,I am very sorry I have the Sears, I spent a lot of $$$ monwah-for no better results!!

My experience says buy 2 of these if you are a home owner ,,you can not go wrong for the money! 1 for duty, 1for reserve and --

this air cutter comes with a chrome allen wrench , and a good quality chrome wrench to install the disc. The Sears--you pay$$ extra for these!!

Its a winner!! I gave it 4 stars as I do not know how long this will last ,Ok $9.99 buys you a lot of use ,,why not get a 2nd for the price and forget the hype or overpaying for so called better merchandise!!Also the deflector metal is light not heavy grade.

I suspect after using this cutter--we are over paying for air cutters!! Buy now,, before some jerk in accounting gets cute,, ups the price!!

Buy 3" HIGH SPEED AIR CUT OFF TOOL Now

Work's better then the other NAME brand one I bought.. Cost less and has held up very well with heavy use.

Read Best Reviews of 3" HIGH SPEED AIR CUT OFF TOOL Here

i have 2 of these and they work better than the $60 husky i owned prior.

Want 3" HIGH SPEED AIR CUT OFF TOOL Discount?

Got this for my husband as a gift and he loved it. He has used it alot and it works great

Save 64% Off

Don't be fooled by the picture and more importantly, the price. This is a Central Pneumatic brand, the one they sell in Harbor Freight stores for $9.99. You don't want to be taken advantaged about this product. The tool works okay but I just hated it when I received it and paid $10 more for the same tool.

6" Inch Dual Action Air Sander Orbital Red

• GREAT DUAL ACTION SANDER! 10,000 RPM!
• Pad Size: 5" or 6"
• Free Speed: 8,000 ~ 10,000 RPM
• Min. Compressor HP Needed: 2HP
• Built in Regulator

Fast shipping. great product. however make sure your compressor can pump that air quick enough to this beast. i have a 5hp 30 gallon tank wich feeds this just fine but on my 16 gallon 3.5 hp just wasnt enough. it ran out of breath in less than a minute. this cut my sanding in half. works as it should. gd luck and happy sanding.

Buy 6" Inch Dual Action Air Sander Orbital Red Now

i like this sander it is small but very handy too.i recommend it especially for the price.im using it to sand my boat!!

Read Best Reviews of 6" Inch Dual Action Air Sander Orbital Red Here

I bought this sander because it was not very expensive. This is my first attempt at sanding and painting a car and so far it has worked great. I wouldn't know how it compares to a more expensive one but it got the whole car sanded with no problems

Want 6" Inch Dual Action Air Sander Orbital Red Discount?

it's great! makes sanding down body panels on car a dream! would definitely buy this again! and i recommend it!

Save 36% Off

Great starter sander cant beat it for the price. the box can in one piece and was all there with little wrench