Showing posts with label air compressor prices. Show all posts
Showing posts with label air compressor prices. Show all posts

Thursday, September 4, 2014

Frigidaire FRA086AT7 8,000 BTU Window-Mounted Compact Air Conditioner with Temperature Sensing Remot

Frigidaire FRA086AT7 8,000 BTU Window-Mounted Compact Air Conditioner with Temperature Sensing Remote
  • 8,000 BTU cooling capacity with variable speed fan
  • Cools room sizes up to 350 sq. ft.
  • 8-way air direction control
  • Anti-bacterial mesh filter type, tilt-out filter access
  • Electronic controls

I am reviewing the Frigidaire FRA086AT7 8,000 BTU Mini Compact Window Air Conditioner. I am giving this AC a good review, but will mention a few things I didn't like about it. All of the complaints are minor, except for one, which was a problem for me, but might not be for you. I'll start with the background information, then list the features, and then list the good points and bad points.

Background Information:

This is a great AC with many features, good looks, digital display, remote control, and it cools the room very well. I'm using it installed in a window for my bedroom. Mine is 8,000 BTUs, but Frigidaire has similar models with different BTUs. It only comes in White. Even though it is described as "Mini Compact," it appears very sturdy and well-made and isn't really that small. Installation was a breeze because the unit weighs only about 50 lbs. It comes with the AC unit, a window installation kit, a nice manual, foam that you can put between the windows, and self-adhesive weatherstripping to cover any openings. All hardware is included. You just need a Phillips screwdriver to install it and a drill if you want to screw the top of the unit into your window. It is Energy-Star Compliant. The warranty is ONE YEAR Full Coverage and FIVE YEARS for the AC compressor.

Features:

* It has a green LED digital display with membrane button controls. You press buttons to control the unit. There are no knobs. Membrane means that all the buttons are covered by hard plastic and you press the label on the plastic that covers the buttons underneath. Each button press emits a beep, but if you hold the temperature/timer button down, it scrolls faster and only beeps once.

* It has buttons for On-Off, Mode, Fan Speed, Temp/Timer Up, Temp/Timer Down, Timer, Sleep, Filter Reset, and Clean Air.

* The Green Digital display shows the Temperature and Timer. Normally, when the unit is on Cool or Econ, it shows the temperature you have set, like a thermostat. However, when the fan only is on, it shows the actual temperature in the room. When you are setting the Timer, it displays the count-down timer.

* It has green LEDs for the 3 modes, the 4 fan speeds, whether the digital display is showing Fahrenheit, Centigrade, or Timer, Timer On, Sleep On, Filter Reset On, Clean Air On, and Remote Sensing On.

* You turn the unit on and off and it remembers your last settings. You press Mode to select from Cool, Econ, or Fan Only. Econ is Economy Mode that cycles the AC compressor on and off, once it reaches the set temperature, to conserve energy.

* Fan Speeds are Low, Med, High, so you have 3 speeds for both the AC and fan. The AC also has Auto Fan, which regulates the fan speed automatically for you. It comes on full blast when you first turn it on, then gradually lowers the fan speed as it reaches your desired temperature.

* The Up and Down buttons are used to set the temperature on the digital display. You can set it from 60 degrees to 90 degrees and display it as either Fahrenheit or Centigrade. These buttons are also used to set the Timer.

* The Timer button allows you to program the unit to either turn on or shut off one time over a 24 hour period.

* The Sleep button raises the temperature you have set by 2 degrees, one half hour after you activate it, and then by another 2 degrees, half an hour later. Then it keeps this temperature for the next 7 hours. It sounds more confusing than it is. Basically, you can activate the Sleep feature when you go to sleep. It assumes an 8-hour sleep cycle. So if you set the temperature for 72 degrees, then an hour after you go to sleep, it will be set for 76 degrees for the next 7 hours, and then go back to 72. The theory is that it you can fall asleep with the temperature you have set, and it can gradually get a bit warmer during the night, without it disturbing you, plus, it will prevent you from becoming too cold.

* Filter Reset has an LED that lights after every 250 hours of use. When it lights, it reminds you to clean the filter. After you clean it, you press the button to turn off the LED and reset it. Then it will remind you after the next 250 hours of use.

* Clean Air is a built-in Air Ionizer and Purifier. If you turn it on, it will automatically remove dust and impurities from the air while either the AC or fan is running.

* It has two separate air vent openings at the top that can be controlled independently.

* The enclosed remote (2 AAA batteries included) has an unlit LCD Display that shows the actual temperature at the remote, presumably that is where you are sitting. You can control everything from the remote, except the Filter Reset and the Clean Air Filter. A red LED blinks when you press a button. You can also turn Remote Sensing on and off from the remote. When it's on, a corresponding LED blinks on the AC unit to show it's activated. Normally, the unit controls the temperature, based on what the temperature is at the AC unit itself. When Remote Sensing is on, the unit then controls the temperature based on what the temperature is where the remote is located.

Good Points:

* Cools fast and extremely well.

* Very quiet.

* 6 foot long, 3-prong power cord, so you probably won't need an extension cord.

* Remembers your last settings, even if the unit is shut down due to a power failure.

* Auto Fan speed is very nice and is similar to digital climate control in a car, plus you have the other 3 manual fan speeds.

* Sleep feature is a nice touch to prevent you from getting too cold while sleeping.

* Reminds you when to clean the filter.

* Air ionizer is a good idea and makes you wonder, why didn't someone think of this before.

* Very attractive looking unit.

* Remote control adds a level of convenience, but it is the temperature display right on the remote that is an added bonus. Plus, having the unit control the temperature right where you are with the remote is very nice.

* Small and easy-to-remove air filter. It slides out from the top.

* Very energy efficient and the increase in my electric bill is much less than with other AC units I have owned.

Bad Points:

* Can't speak French. (Honeymooners' reference.) ;)

* It's slightly annoying that if the AC is on, you have to cycle it to Fan to display the actual temperature in the room, and then set it back to AC. There should have been a separate toggle button that would allow you to view either the temperature you set or the room temperature right on the AC unit itself. There is a temperature display on the remote, but when I am closer to the unit than the remote, I often use the unit to see what the temperature in the room is.

* The vent is always closed. It's the first AC unit that I've owned that strangely doesn't have a Vent Open and Vent Closed control. A number of my other ACs have Vent Open, Vent Closed, and Exhaust controls. It's not that big a deal, but with all of its other features, I wonder why this very basic control was left out.

* When you press a button on the unit, the beeps are very loud.

* For many people, the Timer feature will be a great thing, but I have been spoiled. The Frigidaire unit I am reviewing is replacing a Carrier AC that lasted me 21 years! The Carrier worked perfectly from 1988 until the end of summer 2009 and then it broke. I replaced it with this unit.

The Carrier was ahead of its time and it also had a timer. It was an analog timer, but it allowed you to turn the unit on or off, at hour intervals, as many times as you wanted over a 24 hour period. That might sound like overkill, but I would use it to turn the AC on one hour before I came home from work and then shut off 2 hours later, just in case there was some emergency and I didn't make it home right after work. Normally, I would come home, the room was nice and cool, and then I would turn the timer off. But just in case, I had the peace of mind knowing the AC would shut off in 2 hours, instead of staying on all night, if I didn't make it home.

You can't do that with the Frigidaire. You simply set a countdown timer and when it reaches zero, the unit will turn on, if it is off, or turn off, if it is on. Also, you have to set the timer every time you use it. With the Carrier, you could set the programmed times once, and then just turn the timer on when you wanted to activate it. Again, this is not that big of a deal and many people may not even use the Timer.

* The major drawback for me and the only thing that prevented me from giving the unit a 5-Star Rating was that the air-directional controls are absolutely horrible. I'm talking about the opening at the top of the unit where the air blows out from. I honestly can't understand how such a nice unit could be so deficient in this regard. They really missed the boat on this one.

All the ACs I've had over the years had very similar air-direction controls and they all worked great. Basically, they all had little handles, where you could rotate the vent flaps either left or right. Then there were also up/down flaps, where you could direct the air to blow upward. The bottom line is that you could control the direction of the air flow beautifully.

With the Frigidaire, they advertise it as 8-way air control. If you look at the picture you can see that you can control the left and right vents separately. So the left vent can be controlled left-right-up-down and that's 4 ways. Then the same for the right vent, makes 8 ways. Well, it sounds good on paper, but the vents simply do a bad job of controlling the direction of the air flow.

Each vent has a knob that you rotate to presumably control the left-right air flow. Then, you can also click each vent either up or down. Well, if you look at the picture you can see that a plastic rod with small plastic circles on it controls the left-right air flow. The problem is that these plastic circles don't go all the way to the top of the unit, so air ALWAYS blows straight ahead, no matter how you adjust the controls. If you adjust them full left and full right, some air will be directed left and right, but the majority of air will still blow straight ahead. To add insult to injury, the up/down controls are totally useless. They don't swivel, allowing you to position them at numerous up/down positions. There are only 2 positions. Straight ahead or you can click them up one notch, which raises them up about a quarter of an inch. They are useless because they only vary the up/down air flow by about 6 inches.

I made a big deal about this because I'm using it as a bedroom AC and it affects me when I'm sleeping. Truth be told, in most circumstances, the air-direction controls of an AC are not that big of a deal. If it's not used in a bedroom, or if it's installed high in a wall or even in a window that's not next to a bed, this should not create a problem for you.

However, as fate would have it, the unit is installed in a window located to the side of my bed. That's where the Carrier AC was installed and when I adjusted its vents, the air would blow upward and to the sides, so it NEVER blew directly on me while I was sleeping. With the Frigidaire unit, no matter what I try, the AC always blows directly on me while I am sleeping and I don't like that. So the bottom line is that this may not apply to you, but it's something you should be aware of. It's really quite annoying that I can't adjust this unit so it doesn't blow on me while I'm sleeping.

Conclusion:

This is a great unit and I highly recommend it, but with one reservation. You virtually cannot control the direction of air flow and it always blows straight ahead. Depending on your circumstances, this might not matter. However, if the unit will be installed in a window next to your bed or next to where you will be sitting, be aware that it will blow directly on you.

Buy Frigidaire FRA086AT7 8,000 BTU Window-Mounted Compact Air Conditioner with Temperature Sensing Remot Now

The best thing about this little AC unit is the "remote sensing" feature. It has a thermometer on the remote control and can use that as the input for the thermostat, set the remote in the middle of the room and it will keep it at an even temperature. It also has an "econo mode" setting and a "clean air" ionic air filter. It is small, relatively quiet, and the 8000 BTU's do a fantastic job keeping the place cool (it hardly ever runs in econo mode but still keeps it cold). This unit was only $10 more than the equivalent 6000 BTU Frigidaire unit.

Read Best Reviews of Frigidaire FRA086AT7 8,000 BTU Window-Mounted Compact Air Conditioner with Temperature Sensing Remot Here

I don't have a lot of experience with window a/c units, but this little guy seems to do alright. I moved to Brooklyn recently in the midst of mid-90s heat, into an apt with 0 a/c. Units were sold out all over town (except in overpriced specialty stores) so I had this unit rush delivered. The quality seems pretty good, given the relative low cost. I have this installed in my bedroom and it keeps the entire room chilly (68 F) on the lowest fan setting. Another plus is that I've not been bothered by any water dripping inside or out of the unit, which has been a problem of mine in other units.

The one negative I have is the loudness of the lowest setting. I wish there was another setting lower that was a bit quieter.

Want Frigidaire FRA086AT7 8,000 BTU Window-Mounted Compact Air Conditioner with Temperature Sensing Remot Discount?

4 stars instead of 5 due to noise not terrible, but not the best available. Just purchased this unit from Lowes (slightly newer model remote control has been changed to the thin "credit card" sized remote control). About the same noise level as my 2-year old Kenmore 8000 Btu; not as quiet as my 20-year old Kenmore 8000 Btu (I have all 3 units installed and running in various rooms, so can compare). This unit is slightly cooler than the 2-year old unit, about the same as the 20-year old unit. Adjusting the directional vents on this unit is better than the older Kenmore, but still not great (no A/C I've seen has had good directional control). One annoying item for a bedroom installation: there is a really loud "beep" whenever you adjust anything. Would be really annoying to a partner if you adjusted the unit in the middle of the night.

Save 14% Off

Ok, I did my research before I bought this unit. It seems like the most bang for your buck. Amazon.com was VERY fast shipping this to me! I was shocked how fast.

The manufacturer claims that it uses only $59 of electricity a YEAR on average. We'll see. I haven't gotten the bill yet.

The unit has an ionizer and here's what I found about them:

"An air ionizer is a device that is intended to purify the air. As its name implies, instead of using fans and filters, an air ionizer creates ions which remove microscopic particles from the air. Rooms are healthier for those suffering from asthma, allergies, impaired immunity, or respiratory ailments, without as many allergens circulating in the lungs. Dust and mold collects inside heating and air conditioning ducts. Higher humidity inside allows bacteria to thrive. An air ionizer addresses these home and office sources of pollution and odor. The ozone that is created when negative ions are generated battles pollution by breaking it down into smaller, harmless components. Published research shows that high levels of negative ions are a useful treatment for Seasonal Affective Disorder."

Then again, a new study conducted by Consumer Reports indicates that ionizers also create ozone that isn't good for you. So who knows? I've been using it.

Pros

* Cools great! Cooled my whole apartment!

* Remote control

* Can use the remote for sensing the temperature instead (nice)

* Easy to install (took me an hour)

* Has an ionizer on it

* Lots of features

* I personally love the sound of the fan. It sounds a lot like a really nice box fan. I sleep like a baby and it downs out the noise from outside since I'm off a busy street. (people pay a lot of money for white noise machines!)

Cons (not enough to deduct a star though)

* No option to use vent to bring in outside air (on the bright side, bugs can't get in through the unit)

* On energy saver mode, it only checks the temperature every 10 minutes (it got up to 80 degrees in here in-between 10 minute checks)

* You'll need weather sealing tape for the side panels (so little bugs don't come in the sides and cold air gets out)

* Smelled a little metallic at first (I think it's the lubrication inside the unit)

Please note: You will probably want to weatherize the room (or your place) the unit is in. This is very easy to do (I put "high density foam tape" around the doors and "clear weather sealing tape" where air could come in around the unit) and makes a huge difference. If hot air is coming in and cold air is getting out, then no normal air conditioner is going to seem good enough. Plus, you lose a lot of money on wasted electricity. That's pretty common sense. If I can do it, anyone can.

CHECK WITH YOUR ELECTRIC COMPANY! I was eligible for a $30 dollar rebate on my electric bill for buying this "green" unit. Every little bit helps!

I found all the specifications before I bought the unit and thought I would share:

Plug Type (NEMA) LCDI 5-15P (Normal Plug)

18-1/2" W x 13-2/5" H x 18-1/8" D

Product Code: FRA086AT7

Product Type: Compact

Power Type: Electric

Installation Type: Window Mounted

UPC Code: 0-12505-27363-6

Color: White

Exterior Dimensions

Height: 13-2/5"

Width: 18-1/2"

Cabinet Depth (with Front): 15-1/2"

Performance

BTU (Cool): 8,000

Dehumidification (Pints/Hour): 1.7

Cool Area (Sq. Ft.): 350

Energy Efficiency Ratio: 10.8

Performance Certification: AHAM

Electrical Specifications

Voltage Rating: 115V, 60Hz

Amps (Cool): 7.0

Watts (Cool): 740

Horsepower (Cool): 0.99

Power Cord Length: 6' (6-1/2')

Plug Type: LCDI 5-15P

Controls

Console Location: Center

Sleep Mode: Yes

AC Specifications

Fan Speeds (Cool): 3

Fan Speed (Fan): 3

Low Voltage Start-Up: Yes

Auto Cool Function: Yes

Energy Saver: Yes

Filter Check: Yes

Clean Air Ionizer: Yes

Remote Control: Full Function / Remote Thermostat

Air CFM (High): 217

Air CFM (Med): 176

Air CFM (Low): 147

Motor RPM (High): 1,600

Motor RPM (Med): 1,500

Motor RPM (Low): 1,400

Air Direction Control: 8-Way

Noise Level dB (High): 60.9

Noise Level dB (Med): 56.6

Noise Level dB (Low): 52.5

Vents Closed: Yes

Filter Access: Tilt-Out

Depth: 18-1/8"

Cabinet Louvers: Yes

Window Mounting Kit: Yes

General Specifications

Filter Type: Anti-Bacterial Mesh

Warranty: 1 Year Full/5 Year Sealed System

Refrigerant: R410a

Window Height (Min.): 14"

Window Width Min. (Max.): 23" 36"

Product Weight (lbs): 46

Shipping Weight (lbs): 55

Exterior Specifications

Dealer Front Material: HIPS

Certifications & Approvals

ENERGY STAR® Certified: Yes

Safety Certification: UL/CUL (SA11087)

You can download all the guides that come with the unit:

Owner's Guide:

manuals.frigidaire.com/prodinfo_pdf/Edison/2020211A1112en.pdf

Installation Instructions:

manuals.frigidaire.com/prodinfo_pdf/Edison/2020211A1131en.pdf

Product Specifications:

manuals.frigidaire.com/prodinfo_pdf/Edison/FRA086AT7_0411.pdf

Energy Guide:

manuals.frigidaire.com/prodinfo_pdf/energyguides/RAC/FRA086AT_EG.PDF

Wiring Diagram:

manuals.frigidaire.com/prodinfo_pdf/Edison/202021190024.pdf

I hope that helps others as much as it did me.

Sunday, June 22, 2014

Amflo, 112, Hose 3/8X12In. F/ Amf100 Series Tire Inflators

Amflo, 112, Hose 3/8X12In. F/ Amf100 Series Tire InflatorsI AM ABLE TO DO ALL THE DOTS THAT I WANT IN DIFFERENT SIZES!! LOVE IT CAUSE IT HAS A VERY TINY TINY ONE TOO

Expectations were exceeded. Item arrived earlier than expected and the hose fit without having to make any adaptations. It is more flexible than the one it replaced, so I do not expect the outer casing to crack as the last one did.

Buy Amflo, 112, Hose 3/8X12In. F/ Amf100 Series Tire Inflators Now

Saturday, June 7, 2014

New 60 Gallon Sandblast Cabinet Sand Blaster Air Tool w/ 40lb bottom feed hopper

New 60 Gallon Sandblast Cabinet Sand Blaster Air Tool w/ 40lb bottom feed hopperI bought this a WHILE back and it arrived in a very smashed and damaged box. Looked like it was used and repacked. Anyways, i have a small machine shop so I figured I could bend out the pieces to make it work. I opened the entire product and after unpacking it realized it did not have any instructions or bolts/screws with it. I contacted the seller and asked to ship me one, as I thought I was doing them a favor and keeping the damaged product, just need some guidance to put this thing together. Never received one or any emails back. So now I still have a pile of parts that are pretty much useless. I work 70 hours a week so time is a luxury with me, and this is quite a rip off. Buyer beware!!!!!! There is so many pieces in this product that it would take 2 hours on a easy day with the instructions!!!!!

i received the shipment, 90% of the parts for the cabinet were severely damaged. i sent pictures and they offered to send replacement parts..i was upset, but found that to be acceptable. i opened the box of replacement parts to find they were all damaged ..some at least as bad as before, others far more so..almost like a joke... completely creased seams at the connections etc. i can maybe condone 1 part making it through..but almost the whole set up..TWICE ..i think not. avoid this seller. if they dispute this claim i would be more than happy to supply 2 sets of photos..if it didnt cost me more than i would win, id take them to small claims court.

Buy New 60 Gallon Sandblast Cabinet Sand Blaster Air Tool w/ 40lb bottom feed hopper Now

If you assemble this with a bead of caulk on EVERY seam, you shoudl be able to use it succesfully. Mine leaked horribly with the minimal seal that came with it.

Read Best Reviews of New 60 Gallon Sandblast Cabinet Sand Blaster Air Tool w/ 40lb bottom feed hopper Here

This cabinet is of a very poor quality! Luckily my package arrived undamaged and with no missing parts. However, even if you carefully follow all instruction this assembly won`t stand a pressure it was intended to: IT LEAKS BADLY! From everywhere! I had to disassemble the unit and then re-assemble using generous amounts of caulk. Not as bad but it still leaks it`s just a big junk box, use it to store things but to work with high pressure applications. I`m getting rid of this!

Want New 60 Gallon Sandblast Cabinet Sand Blaster Air Tool w/ 40lb bottom feed hopper Discount?

First realize this product is a kit, not a finished assembled product!! That said, my kit I got arrived in quite good shape. Understanding that it is a collection of thin metal pannels,and other hardware, and perhaps a million small nuts bolts and washers. The actual product box was inclosed in an outer shipping box. Perhaps the model that I recieved was updated because it appears as though there was considerable packaging effort to get it to me safe. There was even plate glass for the window that made it to me unscathed! One or two of the pannels were a bit damaged.

Next important point.... It is NOT a one man job to assemble!!!! so dont even try to do this solo. I am mechanically inclined and I work on cylinder heads as a hobby but still putting this thing together was daunting.

Third. It will take several hours. But is it well worth it to invest the time to build it right the first time. Tighten those fastners like you dont ever want to have to touch them again.

Fourth. Follow another reviewer's advice and seal up the seams with caulk. My kit came with rolls of adhesive foam strip seals but this is easily damaged when putting together the main chamber.

There was a fault in the gun supplied with my kit but after a thorough inspection, I saw the bit of metal left from machinin the gun which was blocking the media passage into the air stream. I got rid of that and the unit worked fine with some medium grit black beauty that I got.

So why did I give this four stars? In a word, price! For the price I think its well worth it. Once you get it together, and get it sealed it does the job it was designed to do perfectly. The only reason I would pay 100 bucks more for a simmilar cabinet was if it came assembled... that is the only thing that would justify the price.

I also appreciate the fact that the unit came with an assortment of ceramic nozels and several replacement plastic sheilds for the viewing screen. I've made some mods so that it functions better for me. This included longer hoses for the gun, both for the media feed and for the air. I find I also need more light inside of the cabinet.

I'm pleased with the product.

Thursday, May 29, 2014

Maxair C5160V1-MAP 60-Gallon 170 PSI Max Electric Stationary Compressor

Maxair C5160V1-MAP 60-Gallon 170 PSI Max Electric Stationary Compressor
  • 5HP electric motor
  • Extended drain at base
  • 18.5 CFM at 100 PSI
  • 60-gallon vertical tank
  • Heavy duty belt guard; high performance

I had a similar sized Puma which lasted for about 16 years, but needed repairs occasionally and eventually wound up developing a crack in the top of the tank. This one has higher pressure and more CFMs, and a much heavier duty pressure switch. I had to replace the undersized pressure switch on my Puma twice. The motor is huge and looks about 50% bigger than the one on my Puma. The compressor runs a little quieter and seems to run a lot cooler. It seems really solidly built and well thought out. The tank has a higher pressure rating. It has a really convenient extended drain valve that's easy to reach right at the lower front of the tank, rather than underneath the tank. It has cast iron cylinders, three separate air filters, copper finned copper tubes where the compressor feeds into the tank to help cool down the air before it gets into the tank, and a big fan/flywheel. The oil level site glass on the pump is easy to see, and the oil fill is in a convenient location. It has a nice large liquid filled pressure gauge that holds steady and is located for easy visibility. The pressure switch is on the side, where it's easier to get to and easier to wire up. The air coming out of it is nice and dry, with no oil blow-by from the compressor. I wanted something that will be really reliable and put out enough pressure to run all of the tools I use. The old Puma was almost good enough, but I think this one will be perfect.

I use this fairly often for, painting, bead blasting, air tools, cutting tools, plasma cutter, etc. Works like a champ so far, and I'm really happy with it. Would definitely recommend it to anyone who wants to pay a little more for a good quality compressor.

One more thing I like about it is the three feet it has instead of four like some other brands. The feet have slotted holes, so your holes can be slightly off in alignment from the holes you drill in the concrete and it will still work. I think you definitely want to bolt it down. It's very top heavy and needs to be bolted securely to the ground. I have mine on a 6" thick slab with a little home-made wood shed around it which I located out behind my garage. I used three 3/8" "drop in anchors" to bolt it down, but you could probably use 1/2" too if you wanted to.

Monday, April 14, 2014

Ingersoll Rand R37121-600-VS 250 PSI MAX 1/4-Inch Regulator, Black

Ingersoll Rand R37121-600-VS 250 PSI MAX 1/4-Inch Regulator, Black
  • 1/4-Inch NPT
  • 0-140 PSI Pressure Range
  • Flush-mount gauge
  • Relieving - standard knob control
  • 59 CFM

This may well be the best regulator I've seen. If I have one complaint, it's that the gauge seems small. That's no surprise, though. It's integrated into the regulator, and the whole block is rather small. Even so, it's a small complaint. Everything is well-marked and legible, and I am most impressed with everything else about it.

I use a 30-gallon, oil-lubricated automotive compressor to run an airbrush. This is probably overkill, but for 5 minutes of noise, I get 2-3 hours of quiet work time. Unfortunately, my compressor has been eating regulators at the rate of one a year, though the last one only lasted 2 months. They work fine at 40 lbs, and may even work well at higher pressures. But sooner or later, when I run the pressure up to 80 or 90 lbs to fill a tire, the thing fails. As you may know, a regulator usually costs $20 to $60. It's a bother.

The regulators I've bought at the Big Box stores seem really cheap. Their performance has been lackluster with several pounds of pressure loss when I actually start spraying. I've had replacement regulators fail right out of the package, too. Not good! With respect to most of the actual failures, I've since learned that it is extremely important to raise and lower the pressure slowly more slowly than I've been doing it. Raising and lowering the pressure too quickly puts undue stress on the springs and seals. But the pressure and quality issues are still a bother, and I still needed a new regulator. So, I chose this one because I-R is a respected brand, this looked well-made, and the price was right.

I'm happy to report that this is an outstanding piece of hardware, and apparently bargain priced. Other sites want $40 to $50 for the same unit. First, this has a very handsome, modular design. Second, all the parts seem well-made and fit together nicely. To adjust the inner range band, you do need to carefully remove the front housing, It snaps off and reveals the gauge assembly. Then, you move the yellow arrows as desired to set your pressure range. You pop the housing back into place and all is good. If you want the pressure knob on top, you remove the housing, remove a couple screws, carefully turn the gauge assembly 180 degrees, replace the screws, and replace the housing. Done!

Once installed, I found the regulator has very little pressure drift maybe a pound or two. Very Happy! Visiting the I-R site, I found that the company recommends putting a dirt & water filter between the air source and the regulator. No stock consumer compressor I've seen has this, and I've noticed buildup of contaminants in a couple of my worn regulators. So, this seems prudent and I will soon install a good filter unit to better protect my regulator.

I recommend this as a very good, bargain-priced replacement regulator. I expect this to perform better and last longer than any other regulator I've tried. I will try to post updates over time. Thanks for reading.

Buy Ingersoll Rand R37121-600-VS 250 PSI MAX 1/4-Inch Regulator, Black Now

This is a small and light weight air regulator with 1/4 NPT fittings. I'm using it on my home garage compressor (150PSI Max 5.4CFM @90 from HF). It seems to be holding up and doing it's job. I use the setup probably once to twice a week. It is hooked with a filter, T fitting (for full pressure feed to cleaning hose) and NPT quick conects. This is not the type of unit that you want to be mounting to the wall (although you could) expecting heavy use out of. So far so good. I figured for the price I could give it a shot. Also using the Matching filter.. it works as well. Four stars because it is very 'light duty' and feels like I could break it without a lot of effort. This is being use with Air Tools like impact wrenches, rachets and grinders. Could feel a little more solid.

Read Best Reviews of Ingersoll Rand R37121-600-VS 250 PSI MAX 1/4-Inch Regulator, Black Here

Have been using this for a couple months now and no problems so far. I'm not a heavy user at the moment but basically once or twice a week, so far it has held up. Construction seems pretty decent.

Want Ingersoll Rand R37121-600-VS 250 PSI MAX 1/4-Inch Regulator, Black Discount?

I bought a cheap compressor that had a cheap regulator. The regulator would drop pressure by at least 20-30 lbs as soon as I turned on the air tool. I replaced the regulator with this Ingersoll Rand regulator. It now only drops less than 10 lbs when I turn on the air tool. It drops pressure because I have a water filter down the line which is a little restrictive. I highly recommend this item for a small compressor.

Save 2% Off

I installed this regulator on a Rol Air JC10 after the factory regulator broke. It is quite simple and just has an in and an out port that fits 1/4" NPT connections. The built in gage works just fine, but is a hair on the small side. Being that the unit is compact, there isn't much way around that though. You can switch so that the adjusting knob is on top by switching the gage to the other side and flipping it over. It just requires removing a few screws. The adjusting knob clicks in and out to lock and unlock. The gage has an upper and lower yellow band that you can set to the desired value. This can help so you don't have to get close enough to read the small numbers. I would buy it again. It feels solid and works great.

Friday, March 7, 2014

Amflo 12-25E Blue 300 PSI Polyurethane Air Hose 1/4" x 25' With 1/4" MNPT Swivel Ends

Amflo 12-25E Blue 300 PSI Polyurethane Air Hose 1/4' x 25' With 1/4' MNPT Swivel Ends And Bend Restrictor Fittings
  • The light weight of polyurethane hose is ideal for applications where dragging a heavy hose is an issue
  • Smooth non-marring finish also makes it ideal for indoor trim work where scratching surfaces could create damage
  • 300 PSI blue polyurethane air hose
  • Hose diameter is 1/4 inch and hose length is 25 feet
  • 1/4 inch MNPT swivel end fittings reduces hose twist

This air hose is very light and easy to drag around. It will twist abit, but just unplug your air tool and untwist it. I haven't used my rubber hoses since buying these. I have a 25', 60', and 100' poly hose and they all work great. Cold weather doesn't affect them either.

Buy Amflo 12-25E Blue 300 PSI Polyurethane Air Hose 1/4" x 25' With 1/4" MNPT Swivel Ends Now

Works great, light weight, perfect for off road use with my jeep. I like the swivel ends and bend restrictors.

Read Best Reviews of Amflo 12-25E Blue 300 PSI Polyurethane Air Hose 1/4" x 25' With 1/4" MNPT Swivel Ends Here

Not much else to say, it is what it is, I used it for an interconnect to the hose reel in the basement shop. It works.

Want Amflo 12-25E Blue 300 PSI Polyurethane Air Hose 1/4" x 25' With 1/4" MNPT Swivel Ends Discount?

Was received within 2 days after ordered. Hose was ordered as a replacement. Hooked up quickly and is working with compressor fine.

Friday, November 1, 2013

Florida Pneumatic Air File - Model: 5683 Air Inlet Size: 1/4" Recommended AIR Pressure: 90 PSI

Florida Pneumatic Air File - Model: 5683 Air Inlet Size: 1/4' Recommended AIR Pressure: 90 PSI
  • Replacement files for Florida Pneumatic air file.

the files were bought to supplement a air driven filer. the files are fine so they don't work as well on wood but are useful for small filing. seems to last a while but need cleaning often because they are fine and not aggressive.

Saturday, October 26, 2013

Craftsman D23138 9-Inch Air Compressor Wheel

Craftsman D23138 9-Inch Air Compressor Wheel
  • This wheel is used on air compressor
  • Fits many Craftsman and Devilbiss models
  • 8-Inch long, 6-Inch wide, and 2-Inch high
  • Package weight of this item is 2-Pound

Ours broke we needed a replacement it fits.

the air compressor is happy I'm happy all is right with the world.

It is the best price out there. The shipment arrived on schedule. Thanks for a great wheel

Friday, June 21, 2013

Ramsond CRN-45 7/8-Inch to 1-3/4-Inch Nails Coil Air Roofing Nailer

Ramsond CRN-45 7/8-Inch to 1-3/4-Inch Nails Coil Air Roofing Nailer
  • Operates with a 60 to 110 psi standard air compressor; equipped with a standard male 1/4-inch 18 NPT air inlet
  • Fastener type: 11-gauge nail (3/4 inch to 1-3/4 inches); Nail capacity: 120
  • Trigger-actuated mechanism automatically positions and drives nails
  • Minimum operating pressure: 60 PSI; maximum operating pressure: 110 PSI
  • Composite gaskets, seals and rings with Ergo-Grip cushioned comfort

I own and use just about every kind and brand of air nailer for a remodeling business. This roofing nailer ranks with the brand name tools at half the price. I installed asphalt shingles for 3 days without encountering a single jam. It comes with quality plastic case and adequate instructions.

Buy Ramsond CRN-45 7/8-Inch to 1-3/4-Inch Nails Coil Air Roofing Nailer Now

First off, the shipping was super fast. I ordered it on Sunday and got it on Thursday, from Michigan to Oklahoma. Not bad for standard ground shipping. The instructions were very easy to understand and follow. The nailer itself seems to be pretty good quality for a Chinese import. The gun has a nice paint job with the logos being stickers. (note to Ramsond, get your manufacturer to paint the logo on) After loading some nails and putting a few drops of oil into the air inlet, I set the trigger to "bump" mode and tested it out. After playing "machine gun" on a 2X4 for a while, not one misfire and all of the nails were driven at a consistent depth.

Update: I used this nailer on a roof job. Worked fine. Then later I pulled it out again to nail down tile backer. First off I noticed that the bump fire selector wasn't there anymore. Don't know when it broke off. It seemed to work fine though, until I pulled the trigger and a nail shot out. Without the nose being pushed in. Pretty dangerous.

If I had to do it over again, I would wait until the Harbor Freight nailer came on sale then printed out a 20% off coupon. (do a search, they always have them)

Read Best Reviews of Ramsond CRN-45 7/8-Inch to 1-3/4-Inch Nails Coil Air Roofing Nailer Here

Had a roofing job coming up so I read reviews and ordered the nailer for 2nd day delivery. Arrived on time in good shape. We got 2 squares of shingles down and the nailer shot a nail right through the feed ramp rendering the tool useless. Finished the job (27 square)with a Bostich RN46-1.

Advice Spend the extra on a professional tool

Hats off to Amazon they promptly refunded my money plus shipping both ways Thanks

Want Ramsond CRN-45 7/8-Inch to 1-3/4-Inch Nails Coil Air Roofing Nailer Discount?

This was the best i've spent in a while. We did a large roof on the house, then my son and his in-laws did a large garage roof. No problems at all. On occasion the bump feature would double fire, but not too surprised about that.

Thanks, Amazon

Save 19% Off

I was hesitant to buy this at first since this is not a well-known brand like Dewalt. But with good reviews online for other Ramsond products, and a price below even well-used older nailers on Craigslist, it was worth a try.

I have now completed an entire roof installation using this nailgun. It works perfectly no jams, no misfires, easy loading, feels great in the hand, and perhaps even a bit quieter than the other roofing guns I have used (Dewalt, Porter Cable, Bostitch and Hitachi). Mechanically it looks almost identical to these other guns, right down to the rivets.

I am a house builder by trade, and I will definitely be looking at the other Ramsond tools as I need replacements over time.

UPDATE: Three years later, I still use this machine as my sole roofing nailer. I've lent it out to other builders, and reshingled an additional 5 roofs with my own hands. It continues to kick butt, making me feel pretty smart for choosing this one over a Dewalt at 2-3x the price!