Makita 724603-3 14-Inch Cut-Off Wheels (5-Pack)

• For all ferrous materials
• Internally reinforced
• 1-inch arbor
• Maximum safe speed 4400 RPM
• 5 pieces per package

Not only does this blade last, but it doesn't exhibit the lateral vibration of some "cheap" blades that turn a 1/8" kerf into a 1/4" kerf!

Buy Makita 724603-3 14-Inch Cut-Off Wheels (5-Pack) Now

Ordered the 5 pack of 14" cut-off wheels and they arrived in good condition. Blades were well protected, so they wouldn't be damaged in transist.

These Blades are ideal for cutting Aluminum profiles, as they are a finer grain that the typical Blades you can purchase.

Read Best Reviews of Makita 724603-3 14-Inch Cut-Off Wheels (5-Pack) Here

These are the identical blades Makita installed on the cutoff saw. If you use them much they quickly go from 14 inches to a 7 inch blade so buying a five pack is beneficial. For me, an occasional user, I will have to leave several of these in my will for my kids. Items delivered quickly and in good shape. I recommend this seller for others.

4 Pack of Anti Vibration Pads 4" x 4" x 3/4" All Rubber Vibration isolation pads

• 4 pack of Anti Vibration pads All Rubber Super Duty 4" x 4" x 3/4" 60 PSI max load
• FREE SHIPPING
• Applications are endless.... Air Compressors, HVAC, Stereo Equipment, Treadmills etc etc
• Please understand, these pads are newly made and smell like rubber. the smell goes away in time
• designed for Indoor and Outdoor applications

I used these to quiet a 4 ton A/C condenser on a Structural strut wall bracket. They performed great! there is no noise transmission and they do not allow the unit to slide at all. Others complain about the rubber smell but I used them outside so this was not an issue for me.

Buy 4 Pack of Anti Vibration Pads 4" x 4" x 3/4" All Rubber Vibration isolation pads Now

Did exactly what I needed it for at a super low price. I used it to isolate my CD player and also under the feet of my component rack from extraneous vibration off the speakers and the floor when somebody walks by.(My house is very old and settled and not very level in spots)

Read Best Reviews of 4 Pack of Anti Vibration Pads 4" x 4" x 3/4" All Rubber Vibration isolation pads Here

They're may be OK, but not for my application/

I used 'em to reduce vibration of my generator which sits on the back of my cargo van.

When generator is running, noise inside the van is almost unbearable...

Want 4 Pack of Anti Vibration Pads 4" x 4" x 3/4" All Rubber Vibration isolation pads Discount?

I stuck these under an extremely noisy A/C compressor that was outside of the master bedroom. When the unit went into defrost, the undulating of the unit went directly into the concrete pad, which amplified the noise. It would literally wake me up out of a dead sleep at times.

Now, it's much quieter, and I've even had the neighbor remark as such. Easy fix, well worth the money.

Just as an amusing aside, in regard to the "smell", I took the pads out of the shipping envelope (a USPS priority mail envelope they barely fit into), installed them, and left the envelope on the kitchen table. A few hours later, my wife hysterically thought the house was on fire from the smell. I put two and two together and reassured her, but she scolded me for leaving a smelly envelope on the table.... anyway, not worth knocking off a star because they work GREAT!

Save 41% Off

After scouring Amazon for anti-vibration pads I chose these. They're relatively cheap, and they look durable, too. They've turned out to be a smart buy.

Pros:

-Quite thick compared to other products.

-Should be durable because it's not a layered combination of materials.

Cons:

-Strong rubber smell. I know that the product listing emphasizes that issue but it should not be understated. If the rubber odor could be a problem, then try letting the pads sit somewhere for a while. The smell will (metaphorically) hit you in the face as soon as you open the package. And then you'll find that your hands, along with the receipt, smell like rubber.

As of this review the pads have been in place for only a few weeks. They're not exposed to the elements, but if they deteriorate I'll update this review.

Ingersoll Rand R37121-600-VS 250 PSI MAX 1/4-Inch Regulator, Black

• 1/4-Inch NPT
• 0-140 PSI Pressure Range
• Flush-mount gauge
• Relieving - standard knob control
• 59 CFM

This may well be the best regulator I've seen. If I have one complaint, it's that the gauge seems small. That's no surprise, though. It's integrated into the regulator, and the whole block is rather small. Even so, it's a small complaint. Everything is well-marked and legible, and I am most impressed with everything else about it.

I use a 30-gallon, oil-lubricated automotive compressor to run an airbrush. This is probably overkill, but for 5 minutes of noise, I get 2-3 hours of quiet work time. Unfortunately, my compressor has been eating regulators at the rate of one a year, though the last one only lasted 2 months. They work fine at 40 lbs, and may even work well at higher pressures. But sooner or later, when I run the pressure up to 80 or 90 lbs to fill a tire, the thing fails. As you may know, a regulator usually costs $20 to $60. It's a bother.

The regulators I've bought at the Big Box stores seem really cheap. Their performance has been lackluster with several pounds of pressure loss when I actually start spraying. I've had replacement regulators fail right out of the package, too. Not good! With respect to most of the actual failures, I've since learned that it is extremely important to raise and lower the pressure slowly more slowly than I've been doing it. Raising and lowering the pressure too quickly puts undue stress on the springs and seals. But the pressure and quality issues are still a bother, and I still needed a new regulator. So, I chose this one because I-R is a respected brand, this looked well-made, and the price was right.

I'm happy to report that this is an outstanding piece of hardware, and apparently bargain priced. Other sites want $40 to $50 for the same unit. First, this has a very handsome, modular design. Second, all the parts seem well-made and fit together nicely. To adjust the inner range band, you do need to carefully remove the front housing, It snaps off and reveals the gauge assembly. Then, you move the yellow arrows as desired to set your pressure range. You pop the housing back into place and all is good. If you want the pressure knob on top, you remove the housing, remove a couple screws, carefully turn the gauge assembly 180 degrees, replace the screws, and replace the housing. Done!

Once installed, I found the regulator has very little pressure drift maybe a pound or two. Very Happy! Visiting the I-R site, I found that the company recommends putting a dirt & water filter between the air source and the regulator. No stock consumer compressor I've seen has this, and I've noticed buildup of contaminants in a couple of my worn regulators. So, this seems prudent and I will soon install a good filter unit to better protect my regulator.

I recommend this as a very good, bargain-priced replacement regulator. I expect this to perform better and last longer than any other regulator I've tried. I will try to post updates over time. Thanks for reading.

Buy Ingersoll Rand R37121-600-VS 250 PSI MAX 1/4-Inch Regulator, Black Now

This is a small and light weight air regulator with 1/4 NPT fittings. I'm using it on my home garage compressor (150PSI Max 5.4CFM @90 from HF). It seems to be holding up and doing it's job. I use the setup probably once to twice a week. It is hooked with a filter, T fitting (for full pressure feed to cleaning hose) and NPT quick conects. This is not the type of unit that you want to be mounting to the wall (although you could) expecting heavy use out of. So far so good. I figured for the price I could give it a shot. Also using the Matching filter.. it works as well. Four stars because it is very 'light duty' and feels like I could break it without a lot of effort. This is being use with Air Tools like impact wrenches, rachets and grinders. Could feel a little more solid.

Read Best Reviews of Ingersoll Rand R37121-600-VS 250 PSI MAX 1/4-Inch Regulator, Black Here

Have been using this for a couple months now and no problems so far. I'm not a heavy user at the moment but basically once or twice a week, so far it has held up. Construction seems pretty decent.

Want Ingersoll Rand R37121-600-VS 250 PSI MAX 1/4-Inch Regulator, Black Discount?

I bought a cheap compressor that had a cheap regulator. The regulator would drop pressure by at least 20-30 lbs as soon as I turned on the air tool. I replaced the regulator with this Ingersoll Rand regulator. It now only drops less than 10 lbs when I turn on the air tool. It drops pressure because I have a water filter down the line which is a little restrictive. I highly recommend this item for a small compressor.

Save 2% Off

I installed this regulator on a Rol Air JC10 after the factory regulator broke. It is quite simple and just has an in and an out port that fits 1/4" NPT connections. The built in gage works just fine, but is a hair on the small side. Being that the unit is compact, there isn't much way around that though. You can switch so that the adjusting knob is on top by switching the gage to the other side and flipping it over. It just requires removing a few screws. The adjusting knob clicks in and out to lock and unlock. The gage has an upper and lower yellow band that you can set to the desired value. This can help so you don't have to get close enough to read the small numbers. I would buy it again. It feels solid and works great.

- NorthStar Belt Drive Single-Stage Portable Air Compressor - 2 HP, 20-Gallon, Vertical, 5.5 CFM

• 2 HP 115V/230V 15/7.5 Amp dual voltage induction motor
• 2-cylinder cast iron single-stage pump
• Delivers 5.5 CFM @ 90 PSI; 7.1 CFM @ 40 PSI
• Copper finned inter- and after-coolers provide effective heat dissipation and less moisture
• Ball bearings on each side of crankshaft for smooth running and durability

The NorthStar Compressor seems to working fine so far. It has been only 4 months. I replaced my Craftsman compressor with this one. The Craftsman compressors are all made in "China." In other words, will not last more than 1 year. Mine stopped working after 6 months. The parts are marked up SUPER HIGH. For example a power cord is $50!! A thin gasket should cost no more than $5 is $22!

Amazon uses a local shipping company here in California. They are terrible. They are unprofessional & refused to deliver the compressor on the specified day. I called them to will call the compressor. They knew I was going to pick it up & I had to wait 1 hour for them to find it.

This is after they said they had NO TRUCKS going in my direction (about 30 minutes from their local)and I would have to wait 3 days.

New Classical Style V Belt A90 A-90 4L920 1/2" x 92

• Brand New Classical Style V Belt A90 4L920 (1/2" x 92")
• FREE SHIPPING
• These are Classical Style V Belts... Not FHP. Classical Style are better quality
• 90In inside diameter. 92in outside diameter

Go to youtube and copy and paste in

Hill climb and snow bank jumps

Look for the video made by redneckcomputergeak

It easily handles my off rooding needs and does not heat up at 20 mph. Has great grip and well enforced Kevlar backing

Save 28% Off

Grex Genesis.XN Double Action Top Gravity Airbrush, 0.2mm Nozzle, 1.5ml Cup

• 0.2mm nozzle size with a small top gravity cup for fine detail work
• Internally mixed, cutting edge design for precise control of fine detailed work.
• Replaceable solvent proof teflon seals, precision machined stainless steel nozzle and needle
• Convenient to clean design with short passageway from cup to nozzle for responsive feel
• Preset adjustment knob for precise paint volume control

Based on my positive experience with Grex pinners when I wanted to purchase some airbrushes for gift-giving I thought to try the Grex Brand. The recipient who had used Iwata and Badger brand airbrushes in a classroom setting said that he really liked the Grex compressor/airbrush outfit (that I bought at a bricks and mortar store) so much so that I followed-up with additional Grex purchases through Amazon to fill out his setup.

Save 15% Off

DEWALT D55154 1.1 HP Continuous 4 Gal Electric Wheeled Dolly-Style Air Compressor with Panel

• 4.0 CFM delivered at 90 PSI pump provides rapid recovery
• Oil lubricated pump improves durability
• Cast iron cylinder enhances pump life
• 10-inch pneumatic wheel and handle kit for ease of mobility
• Top load panel with positioning holes allows unit to transport loads up to 100 lbs;High-flow regulator for increased performance

I looked over compressors for awhile and was impressed by the list of features with this model. I love the wheels and the upright nature with the handle. I have found the drain valve hard to find visually and I was extemely disappointed with the cut in factory preset at 95 pounds and the cutout set at 120-122 pounds. I see no reason for these low settings. other models cut in at 120 and cut out at 150. depending on your tool set this is a problem. My framing nailer operates best at 115-120 so with this compressor it's only operating at peak performance 1/3 of the time. I am trying to figure out how to adjust the cut in/out presssure but the manual is useless in this area. All of my other tools work great and it can definetly keep up with everything I've attempted so far other than my somewhat disfunctional framing nailer. Overall it has been a great unit so far.

Buy DEWALT D55154 1.1 HP Continuous 4 Gal Electric Wheeled Dolly-Style Air Compressor with Panel Now

I've put off purchasing a portable air tank for years and finally bought this one after lookimg and comparing for quite some time. I am very pleased. Builds air in a hurry and will keep the tank at the same level even with the tank valve open to not allow the air to stay in the tank. It is a little heavy to lift but the wheels and handle were put there for a reason. I like this dewalt compressor very much.

Read Best Reviews of DEWALT D55154 1.1 HP Continuous 4 Gal Electric Wheeled Dolly-Style Air Compressor with Panel Here

Good little compressor. I bought it to run a Hitachi NV85 nailgun. It works great. Good quality. I like the solid rubber tires and the oiled compressor. Granted it is a relatively small capacity compressor just like all portable nailing compressors but unless you are nailing nonstop it does just fine. Cycle rate is fairly quick and I like that it has a good heavy grounded plug. Time will tell its durability.

Want DEWALT D55154 1.1 HP Continuous 4 Gal Electric Wheeled Dolly-Style Air Compressor with Panel Discount?

great compressor, has exceeded expectations. when recommended by contractors and I just need for home use I jumped at it. no regrets,airs tires, paints, nails, and chips with ease and reliably.

Save 48% Off

I bought this Compressor last year for my garage. I wanted one for tires on my truck,car, and lawn tractor. I used it that summer a few times and it ran fine. NOW, spring is here and I wanted to check tire pressure on the lawn tractor and it just hums and trips the overload on it. I waited for it to cool down and reset it. I hit the switch and it hums. I turn the switch on and off a few times before it trips and all of a sudden it runs. Warrentee is for 90 days on a bebuilt I guess. I have ALWAyS been a YELLOW guy. This has let me down. $300.00 plus and it is JUNK !!!!!

Campbell Hausfeld AT1251 30-Pound Capacity Sandblaster

• Portable, lightweight sandblaster ideal for home improvement projects
• Removes paint from furniture and concrete; eliminates rust from metal; etches glass and wood
• Requires 9.0 scfm at 90 psi; 125 psi maximum
• Includes ceramic nozzle and shoulder strap
• 1-year warranty; measures 16.80 x 5.30 x 14.30-inches (L x W x H); weighs 5.3-pounds

I bought this sandblaster for a few weekend projects. It is very easy to use, and works fantastic! I used it to sandblast engine cases on my 1960 Harley. I purchased a grit called "Starblast" on the recomendation of my local supplier. This stuff worked great in the Cambell Hausfeld, and gave me professional looking results.

Buy Campbell Hausfeld AT1251 30-Pound Capacity Sandblaster Now

Purchased this to help restore a fire hydrant, It worked well. I used reqular play sand which I screened to get small rocks out. The blaster worked well even with this and no special sand.

Read Best Reviews of Campbell Hausfeld AT1251 30-Pound Capacity Sandblaster Here

For under $50.00 I was very skeptical if this was going to work or not. It works DAMN well for the price. My only problems were with the sand. There were some larger pebbles that would jam up in the nozzle. A quick twist and they were gone but it was an inconvenience. I ended up sifting the sand with a screen and the reliability was perfect. I was using medium grit... I suspect that fine grit would have been less difficult to blast with. This sand blaster was used to clean the frame of my Jeep Wrangler. I just took a hammer to knock off the heavy stuff and cleaned it up with the blaster. GET GOGGLES... not glasses. I'm still plucking sand from my eyes.

Want Campbell Hausfeld AT1251 30-Pound Capacity Sandblaster Discount?

Works great small jobs, but I wouldn't try to do anything bigger than a few odds and ends. Very straight forward set up and assembly. I just poured in some play sand directly from the bag and it worked great with no clogs. Definitely need goggles and need to work in area that you don't mind looking like a beach when you're done.

Save 41% Off

I guess since I didn't pay much for it I shouldn't expect much. You have to hold the tip less than 2" from what you are working with. You need to shake canister often so material will come out after level is down to 1/4. I tried using sand but it didn't work and had to use black beauty for the job.

Dual Run Capacitor 45/5 MFD 440 Volt Round - Air Conditioning Replacement Part

• Air Conditioning Dual Run Capacitor 45/5 Microfarad 440 Volt
• Common run capacitor for some air conditioning compressors.
• Used on some A/C compressors. Metal casing. Round shape. 2 terminals with 4 prongs each.
• Made in Mexico, more reliable then capacitors from China.

I'm sure capacitor will work fine, but product description states the capacitor is a Mars product made in Mexico vs a made in China capacitor. Actual product shipped is an equivalent capacitor but made in China for Supco. Have had reliability issues with Capacitors from China. Bottom line I expected a product with Brand as shown.

Buy Dual Run Capacitor 45/5 MFD 440 Volt Round - Air Conditioning Replacement Part Now

It is a capacitor. What do you want me to say? It capacitates the heck out of my A/C system. In fact I don't think it has ever capacitated better. They shipped it quick and packed it well.