1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909

• 1.8 amps @ 230 Volts 60hz.
• Shaft: 1/2" x 6 1/2" Rotation = Reversible - Bolt Circle - 5.2"
• Belly Band Mount or Base Mount - Required 5 MFD 370V Capacitor Included
• Motor Length Less Shaft = 4"
• 1 Year Manufacture Warranty

I was quoted a price of almost $300 to replace my condenser fan motor. For a fraction of that price, this motor matched the specs perfectly, except that this one has ball bearings at each end to ensure even longer life. It was easy to install, I think it took me a couple of hours. I had to trim the shaft and I cut the mounting studs a little shorter. It seems to be a quality part, on par with the original or even better. Mine didn't come with any instructions, so you will need to know a little about wiring a motor. I was able to find specific information online for connecting the included capacitor, as my unit has a combined type of capacitor.

Buy 1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909 Now

I ordered this motor to replace an OEM unit that cost over $200 without the capacitor or shipping. For about $50, I got the motor, capacitor, and shipping.

This is a 4-wire motor, so if you are replacing a 3-wire unit, you'll have to take care to wire it properly. There are pointers to be found on the Internet if you know an electrician or technician, you might ask for a little advice.

Also, the motor can be wired to run forward or reverse with a pair of jumper wires mine had to be swapped to rotate the fan properly (pulling air out of the condenser unit).

Another issue is that the studs holding the body together are very long. Once I tested operation of the motor, I removed each screw to trim about 1" so that I could move the fan blade as high as possible. The shaft is about 6" long, but I did not trim the excess from it.

Finally, the wires from the motor are only about 18" long. That may not be long enough for some applications. The motor I removed had about 3' of wires. Be sure to use accepted methods if the wires have to be lengthened.

I'm a handy guy, so the extra work to install this motor was worth the savings. If you have to hire an electrician or AC tech to install the motor, it may not save too much. This one's been installed for about a month and is working great.

Read Best Reviews of 1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909 Here

Recieved quickly. I own several rental properties and bought as a standby motor. Therefore it has not been installed yet. Great price.

Want 1/4hp 1075RPM 5.6" Diameter 208-230 Volts Fasco # D7909 Discount?

At the time of this review the listing details say that capacitor comes with it. Some people did not get the capacitor so immediately after making purchase I sent seller message requesting they include capacitor. They replied fast and polite and said Amazon had not informed them of change to listing details. I got motor fast and capacitor the next day as they were shipped separately (due to shipping origins being different I believe).

I was replacing a motor with a 3 prong capacitor (it is called a dual capacitor not to be confused with 2 pole as that is different aspect of capacitor) and the one that comes with this is a 2 prong. Most of the few motors that include a capacitor are a 2 prong capacitor. IF you are replacing a motor that has 3 prong (dual) capacitor with a motor that is 2 prong and the original capacitor is ok you simply leave original connected to everything except motor you are removing. Generally this will be a wire to compressor and a power wire. Then mount new capacitor and connect new motor to that one. A bad capacitor will generally look bad by having a bulge on either end of the cylinder.

Any time you replace the motor you should clean or replace the contactor. They are pretty cheap on Amazon being around ten bucks and usually you can get them same day locally for about 3 times that. Plan ahead and save some money with Amazon. For the price it is worth just getting new but in a pinch you can clean them up (meaning to clean contacts).

Bad capacitors and or contactors can be cause of fan motor failure but also many times it is simply just a bearing failure in motor too. But for less (often much less) than $30 you can replace both at same time if you order on Amazon. No I don't work for Amazon, lol. Just hope to save someone the problem of getting motor and then wishing they had ordered capacitor and contactor.

KTool was seller when I bought this motor and they are EXCELLENT. (just in case seller changes since I wrote this).

About 7 weeks later with c/a running almost every day and still quiet, smooth, and running perfect.

After reading the description and receiving the Fasco 1/4 HP motor part, a key component to make it work was not included. The 5 MFD Capacitor was not only missing but the shipping box says that it is optional and to order separatley. Amazon Description stated that it was included and never mentions ordering it separately. The product cannot work without it either. Sent an email and received a reply from CSH. CSH will be sending the part out and apologized for the inconvenience. Really thought I was going to have a hard time getting the needed piece. Kudos and Thank you.

Firestone 2198 Ride-Rite Heavy Duty Dual Air Command III Air Compressor System

• Super heavy duty air compressor
• Monitors air pressure
• Inflates 2 air springs individually for side to side or front to rear leveling
• Includes 1 gallon air tank for quick inflation
• Backed by 2 year warranty

I was very pleased with the function of this compressor. Although finding the perfect spot for the compressor and air tank took probably the most time this was easy to install. After years of manually inflating my airbags, this was nice to be able to do it right from the cab with a flip of the switches. I would recommend this to anyone who tows.

Grex Tritium.TS3 Double Action Pistol Style Trigger Side Feed Airbrush, 0.3mm Nozzle

• Easy-to-use and ergonomic double action "pull" trigger controls both air and paint
• Internally mixed, cutting edge design for precise control of fine detailed work.
• Interchangeable and 360 Degree adjustable side mount reservoirs
• Patented Quick-Fit needle caps are quick and easy to setup and remove
• Replaceable solvent proof teflon seals, precision machined stainless steel nozzle and needle

The Grex stuff isn't the cheapest out there, but you will NEVER regret spending the extra cash for them. I've tried the cheaper ones (Badger, etc) and there's no comparison this one rules. Easy to clean, easy to use, the trigger action is smooth and gives you great control. If you want the best, this is it.

Buy Grex Tritium.TS3 Double Action Pistol Style Trigger Side Feed Airbrush, 0.3mm Nozzle Now

This is my second airbrush. I've been using a Paasche VL for years which is a nice airbrush. The Grex is much more expensive. But it is a superior airbrush. Now that I've had it for a few months I can review it. Well, I like the ease of the pistol grip action for more precise flow control. I also like having that adjustment stop in the back. And I also notice the Grex more finely atomizes the paint than the Paasche. And because of that too I get better results painting. I use it for painting car models. I find it easy to touch up areas where I have polished through the paint too much. I can very easily blend it back when I touch up those areas.

Read Best Reviews of Grex Tritium.TS3 Double Action Pistol Style Trigger Side Feed Airbrush, 0.3mm Nozzle Here

Easiest To Use, Lots Of Great Features,

I never have to worry about over spraying any detailed lines with this bad boy,

Super easy to clean as well, just one truly revolutionary and amazing airbrush,

Want Grex Tritium.TS3 Double Action Pistol Style Trigger Side Feed Airbrush, 0.3mm Nozzle Discount?

have had a good time with it.I will look to get another one.the detail is good.and handeling is good.good gun

Save 30% Off

So far it has worked perfectly. It's worth buying! I am using it for nail art work and it's really easy to use.

Rockworth RW2G110DPNG 2-Gallon Factory Reconditioned Portable Electric Air Compressor

• 110 psi maximum pressure
• Dual output for quick, easy inflation
• Delivers 0.6 SCFM at 90 psi
• Oil-free pump means no maintenance

Any time you buy a re-furbished product you always wonder if you are getting hosed. In the case of this product you are getting much more than you are paying for. The fact that it has a built in auto tire inflator as well as a traditional connection makes it work well. Has served me well for all of my air powered projects, from inflating tires to using a nail gun.

Buy Rockworth RW2G110DPNG 2-Gallon Factory Reconditioned Portable Electric Air Compressor Now

I am happy with this air compressor. After becoming totally frustrated with the cheap diaphragm models I opted for a tank model. I only use it for the occasional tire inflation, blowing out fans and other around home uses. This model is labeled as not for commercial use. The included tire inflation hose is handy, the only drawback is the level operated tire stem valve that I just don't like. This compressor puts 60 lbs. in my spare tire in no time at all.

Good buy for what it is.

Read Best Reviews of Rockworth RW2G110DPNG 2-Gallon Factory Reconditioned Portable Electric Air Compressor Here

It's small and light weight, comes with some interesting features, like separate tire inflater hose. It's a bit slow, but the the portability it's great.

Want Rockworth RW2G110DPNG 2-Gallon Factory Reconditioned Portable Electric Air Compressor Discount?

I have purchased several air compressors in the $20 or less range for tire inflation and they all did not last long and took forever to inflate a tire. This Rockworth air compressor is ideal for me, I saved money on a reconditioned one, and it works as expected. I have had it several weeks and have used it on car tires, bike tires, trailer tires, and tractor tires. I like the separate tire inflator hose. I haven't used the other hose, but will be purchasing other tools soon. Although it was advertised as reconditioned it was packaged as New and it looks and performs as New.

For it's size (and price) this is a great little compressor! There is not a better deal out there right now! The first compressor I received had a cracked hose; Amazon sent another compressor which arrived NEXT DAY! Amazon also paid for return shipping of defective unit. This compressor actually looks new! I would advise anyone who needs a small compressor for lite duty jobs to buy this one! Also, there is GREAT Amazon customer service that backs it up!! Five stars people!!!

6" Inch Dual Action Air Sander Orbital Red

• GREAT DUAL ACTION SANDER! 10,000 RPM!
• Pad Size: 5" or 6"
• Free Speed: 8,000 ~ 10,000 RPM
• Min. Compressor HP Needed: 2HP
• Built in Regulator

Fast shipping. great product. however make sure your compressor can pump that air quick enough to this beast. i have a 5hp 30 gallon tank wich feeds this just fine but on my 16 gallon 3.5 hp just wasnt enough. it ran out of breath in less than a minute. this cut my sanding in half. works as it should. gd luck and happy sanding.

Buy 6" Inch Dual Action Air Sander Orbital Red Now

i like this sander it is small but very handy too.i recommend it especially for the price.im using it to sand my boat!!

Read Best Reviews of 6" Inch Dual Action Air Sander Orbital Red Here

I bought this sander because it was not very expensive. This is my first attempt at sanding and painting a car and so far it has worked great. I wouldn't know how it compares to a more expensive one but it got the whole car sanded with no problems

Want 6" Inch Dual Action Air Sander Orbital Red Discount?

it's great! makes sanding down body panels on car a dream! would definitely buy this again! and i recommend it!

Save 36% Off

Great starter sander cant beat it for the price. the box can in one piece and was all there with little wrench