CW301300AJ Campbell Hausfeld Air Compressor Pressure Switch

• Campbell Hausfeld air compressor pressure switch

THis was a universal replacement, not an exact fit, but works fine. Instructions were adequate and it was fairly easy to install.

Buy CW301300AJ Campbell Hausfeld Air Compressor Pressure Switch Now

this part is completely compatable with your older compressor. It installed easilly, and with no modifications other than trimming the plastic unloader tube to the correct length. I reccomend that you purchase the correct unloader check valve while your at it, to prevent further problems once fully assembled.

Read Best Reviews of CW301300AJ Campbell Hausfeld Air Compressor Pressure Switch Here

Thanks for the great product. It was exactly what I was looking for and it showed up earlier than promised. Thanks

TCP Global® Brand 1/4" Mini Oiler / Lubricator - Automatic Mini In-line Air Tool Oiler

• TCP Global® Brand 1/4" Mini Oiler - Inlet and Outlet Sizes: 1/4" NPT
• Lengthen your Air Tools Lifetime and Improve their Performance!
• Provides automatic lubrication of pneumatic air tools which prevents rust and corrosion
• Allows the tools to have a smoother more effective operation, which extends the tools life
• Solid brass construction with high impact clear plastic

Use a small disposable plastic syringe no needle. Suck up a syringe full and it all most fills it. Hope that helps

Buy TCP Global® Brand 1/4" Mini Oiler / Lubricator - Automatic Mini In-line Air Tool Oiler Now

This is a handy little oiler. You fill it through a small hole in the side that is plugged with a screw. The problem is the you can't fill it through the little hole without loosening the brass fitting to let the air out. The brass fitting just screws into the plastic so you can just loosen it and fill through the little hole right out of the lube oil bottle if it has a small spout like most of them do. I can't speak to the oil consumption because I don't leave the oiler on my air tools. I have quick disconnects on both ends and just hook it up for the first few minutes of use (if I remember to). The stuff I use doesn't need a continuous oiler. If your tool does, I would probably get an expensive oiler if the tool was expensive. :)

Read Best Reviews of TCP Global® Brand 1/4" Mini Oiler / Lubricator - Automatic Mini In-line Air Tool Oiler Here

works great easy to install on nail guns just need to buy a couple of quick release cupplers

Want TCP Global® Brand 1/4" Mini Oiler / Lubricator - Automatic Mini In-line Air Tool Oiler Discount?

A great product for my framing nailer. Not so great for grinders as it will yes suck the oil up in less than 5 minutes. Use some Teflon tape and your ready to go. A syringe is a must, 10cc with a 18Gage needle works perfectly.

got these mini oilers fast and they were perfect size to attach to all my air tools.The oilers are made extremely well and work great. If I were to design an oiler it would be the exact duplicate of this one

Neiko Tools Water and Oil Separator for Air HVLP Spray Gun

• Eliminates Water, Oil and Foreign Particles From Compressed Air Line
• Attaches Directly to Spray Gun or Air Tool
• Button Release Valve Allows Easy Disposal
• Air Inlet: 1/4" NPT
• 90 PSI Maximum

The compressor filters work as advertised. I am in the process of painting my boat and needed to install filters to stop water and particles from entering my paint gun. I can see through the filters the amount of water and particles that this filter stopped. I did not have any issues with spray painting my boat. It would have been a disaster if I did not have these filters installed. They were the right price and are quality filters. I would recommend these filters to anyone needing to stop water and particles coming from their air compressor.

Buy Neiko Tools Water and Oil Separator for Air HVLP Spray Gun Now

I bought this separator to use with a siphon-fed spray gun I purchased. As with any air connection I make I used gas sealant tape (similar to Teflon tape) when i connected this to my sprayer. I do not have any other filter on my compressor line as I do not do much painting with it. This oil and water separator worked flawlessly to trap the moisture coming through the hose which meant I ended up with a flawless paint job. I was also painting on a some what humid day which would leave even more moisture in my compressor tank. This product is inexpensive enough that you could purchase several to install on other tools instead of swapping it out, or you could just install it on the end of your hose. I would not hesitate to purchase again.

Read Best Reviews of Neiko Tools Water and Oil Separator for Air HVLP Spray Gun Here

product as described shipped on time and met all my expectations what else can you say about a water separator

Want Neiko Tools Water and Oil Separator for Air HVLP Spray Gun Discount?

Highly recommended. Cheap and functional. Fit my gun with no problems. Since it's glass, you can see the build-up of contaminants it collects. I did not find any instructions for cleaning it, so I will probably throw it away when I'm done.

Save 63% Off

I installed this on a LVLP spray gun and so haven't seen any traces of water. Its very light so you can't even feel it on the gun.

ReelWorks Wall Mount Air Hose Reel

• Mounting Base: 3in. x 7in.
• Hole Pattern: 4in. x 2in.
• Space Between Ears: 5in.
• U-Frame: 10in.H

a light duty reel thats easy to mount any where, I built a flat dolly and mounted the reel next to my compressor that is on the same dolly. When not in use it fits under one of my work benches ready to go where ever I need it. No hunting for the hose or looking for a place to store it works good for me.

BAZIC Duct Tape, 1.89 Inch x 60 Yards, Green

• multipurpose
• tears easily
• resist breaking

A slick-finished tape that does not hold very well. This tape is only good for a very temporary fix. It's a step up from masking tape, but not a large step. I use it for protecting surfaces when I'm prying something close. It lifts off without damaging paint or wallpaper.

Buy BAZIC Duct Tape, 1.89 Inch x 60 Yards, Green Now

Not very thick, not very sticky. Spend an extra buck or two and get better tape. This isn't suitable for anything but the lightest jobs.

Read Best Reviews of BAZIC Duct Tape, 1.89 Inch x 60 Yards, Green Here

I realize you get what you pay for, but this tape is useless.

It has little to no 'stickum', it does not hold or even 'apply' I bought two rolls of it and both were like this.

ALSO I ordered 'red' tape, and this stuff is a faded, washed-out color, more a pale pink or even a pale-orange in places.

Don't buy it, spend a little more, it's worth it in the end

Want BAZIC Duct Tape, 1.89 Inch x 60 Yards, Green Discount?

Duct Tape 1.89' x 60 yards should be 1 pound, if you can check with Uline or Adhes Tape.

For 7.7 ounces in weight, either the thickness is very thin or the length is not correct.

This is not your normal duct tape. Or not the kind I am use to at least. It is overly sticky on the back. If you get this stuck together on itself you are not getting it pulled apart. I used it to cover some wooden dowels. And it worked great. I still have TONS left over because 60 yards is a lot more then I guess I thought it would be. Nice product and super sticky.