DeVilbiss Auto Refinish Products Air Adjusting Valve With Pressure Gauge DEVHAV-511

• DeVILBISS HAV-511 High Output Air Adjusting Valve Regulator With Gauge
• Includes markings for the optimal operating range for the Devilbiss GTI Millennium, and GFG Plus Gun
• Precise air control at the gun for best, consistent results
• Impact resistant guage and break resistant lens
• Lightweight design that fits and professional spray gun

This product is a must have with the DeVilbiss Plus paint gun! Works very well. Had to replace the gun and gauge after over about 8 years of abuse. Not bad for an everyday shop tool.

Save 20% Off

ReelWorks Air Hose Reel with 3/8in. x 50ft. PVC Hose, Model# L816153-P

• Steel reel has corrosion-resistant powder coating

I bought this to replace old lines which had been breaking; it is exactly what I needed and for what I feel is a good price. Installed easily and works like a charm.

Buy ReelWorks Air Hose Reel with 3/8in. x 50ft. PVC Hose, Model# L816153-P Now

I received this Air Hose Reel as a birthday present ordered from Amazon. The only problem was that it didn't come with the 1/2" m x 3/8"f NPT reducing adapter in order to connect an air hose line from the compressor to the Reel. I had to spend some more time ordering this part before I could set the Reel up for use.

Pro-Force VPF1080318 3-Gallon Oil Free Air Compressor with Kit

• Oil free, low maintenance operation
• Equipped with pressure regulator, pressure gauge, quick connect air outlet, on/off switch and built in-handle for easy lifting
• 3-Gallon tank is lightweight and portable, goes most anywhere
• Includes extra value kit - 25-Feet recoil air hose, blow gun with safety nozzle, inflation needle and adapter fitting, dual tire chuck, quick coupler,1/4-Inch NPT male and female thread connectors and thread sealant
• Maximum pressure: 125 PSI; CFM at 90 PSI: 2.0; CFM at 40 PSI: 3.0; RHP: 1.0; UL and CSA certified

I bought this model in Dec. of 2009 and it's been a great compressor. I have used it mostly for the basic air hose or bike tire inflation. Plug it in turn it on and it pumps right up to what ever pressure you set it to. Very well made also.I had to give it a five star rating.

Buy Pro-Force VPF1080318 3-Gallon Oil Free Air Compressor with Kit Now

I use this compressor to air up tires on all our vehicles, motorcycles, and zero turn mower. It airs up the 20" tires on my large SUV (Mercedes GL450) in under a minute each. I have no doubt it'll effortlessly run air tools for the do-it-yourself home improvement types. Oil free and comes with all the basics needed to air up balls, tires, etc. A great machine for the money.

Metro Vacuum 110-IDAR 110-Volt Magc Air Inflator/Deflator

• 110 volt inflator/deflator
• All steelconstruction
• Air power for rapid inflation
• Complete set of accessories
• Weather resistant powder coat finish

We have these at work and have broken a few from being rough and lost a few. Bottom line is this works and you will be happy with. Tip, don't run too long, they get hott.

Accutire MS-4021B Digital Tire Gauge

• Heavy duty construction and rugged design for long lasting use
• Angled head and rubber coated handle for easy gripping
• Large, easy-to-read LCD display
• Equipped with an automatic shut off to prevent deflation
• Accurate to within 0.05 PSI, reading air pressure from 5-150 PSI in 0.5 pound increments

Please ignore the other two users that gave this gauge only one star because it only read 28.5 psi. I find it amusing, but sad, that they didn't realize that there was a protective sticker on the screen that read 28.5. If you peel off that protective sticker, then you get a nice, bright red backlit number displaying your true tire pressure. This gauge works great! The display is amazingly easy to read, and it is also simple to get a good reading.

Prior to owning this Accutire model, I had a 7 year old Accutire digital gauge that finally broke. WIth that old model, it was much harder to get a reading without air leaking out. With this new model, if you just push the gauge straight into the valve stem, you easily get a solid reading without leaking air. The old model's display wasn't backlit either, and I was truly impressed with the large, bright numbers on this new model. I'd highly recommend getting this gauge, as it has all the functionality you need, at a very reasonable price. I like having accuracy to 0.5 psi, and I never use non-digital gauges unless I have no other choice. I also tested this gauge with back-to-back measurements, and it was accurate every time. You won't regret this purchase...

Buy Accutire MS-4021B Digital Tire Gauge Now

This is by far the best tire gauge I've ever had. It lights brightly, easy to see even in sun and always visible at night. Accuracy is high, construction quality is excellent. Highly recommended!

Read Best Reviews of Accutire MS-4021B Digital Tire Gauge Here

While this product works fine, and is accurate, it uses (3) A76 watch batteries. That's a lot of batteries. and the batteries generally only last about 6 months. I have to pay $2 ea for the batteries. Total $6 each time. That's $12 a year. and the unit only cost $8.

Maybe a unit that uses lithium or other long-lasting batteries would be better.

Next time, i think i will try one of the better, more-expensive units.

Want Accutire MS-4021B Digital Tire Gauge Discount?

I found the tire gauge readings to be accurate, and initially this meter was easy to use and quick to take a measurement.

However, within 5 months, the plastic part of the gauge that you put onto your tire had deformed to the point that it would no longer take a reading from a tire. I do not work at a mechanical shop, and I have one car and I had taken a reading about once a week for 4-5 months.

I would not recommend this product.

Save 22% Off

I've owned two versions of this gauge: An LCD version that I bought 7 or 8 years ago, and the more recent LED type. Aside from the display technology, they looked identical.

They were both accurate and reliable, but they both also had very poor sealing against the tire valve. The rubber ring that seals against the valve is too hard and uneven. You have to line the gauge up very precisely, and press very hard to avoid a burst of air escaping from the tire. If you don't get a good seal, the reading can be off, and a couple of bursts of air is enough to drop a tire by 1 psi. Every time I checked my tires, this happened on at least one or two of them. It's bad enough that I got into the habit of overfilling the tires by a couple of psi so that when this happened I would not end up below the desired pressure.

I finally got tired of it and bought a $26.00 gauge at Sears that seems to be just as accurate and does not have this problem.

DEWALT D55001 Synthetic Compressor Oil, 1 Quart

• Provides superior pump protection
• Improves compressor efficiency
• Provides superior start-up, even in low temperatures
• Eliminates compressor valve carbon build-up
• Anti-wear protection provides increased compressor life

Ace sells compressor oil for about $7.00 a quart and from what I can tell from A LOT of research, it is all the

same with the exception of being full synthetic or conventional (What have they used in compressors for the last 80 years?) "Non Detergent, 30Wt" and there is a lot of miss-information out there.

I have owned a couple of used compressors that the previous owners have used regular 30Wt non detergent or a 30Wt full synthetic auto oil on, and you know what you get when you use this stuff?

Open up the release valve on the air tank and you not only get air, but you get oil. (Not what you want)

The claims from this guy and that on the internet are almost comical in there ramblings of what they have used

over the years, and then you get their used junk. A near new compressor will last a good while on the wrong oil, but sooner or later, rings, 0-rings and gaskets wear out from the extra heat the regular oil creates, or the corrosive action of the auto full synthetic (which is a detergent oil).

If the manufacturer recommends full synthetic then use that type of compressor oil.

If the manufacturer recommends compressor oil then you can get away with the Ace type oils at about 1/3 the price.

The reason I rated this synthetic compressor oil at only four stars is because of the price and as a matter of

fact the price of ALL full synthetic or conventional compressor oils. The price is overly inflated when you consider the product even though it is around half the price of Royal Purple.

If you need a full synthetic, then this is the one to get. If you want to pay around twice as much, get Royal Purple.

One more thing, if you are rebuilding the pump (rings,reeds,gaskets) run the non synthetic in the compressor for

a few hours to let the rings seat, and make sure you hone the cylinder/s.

Buy DEWALT D55001 Synthetic Compressor Oil, 1 Quart Now

I bought this thinking I would need more. There is enough in a quart to change a small recip compressors oil 4 or 5 times. I know its expensive, but not as expensive as replacing you compressor.

Read Best Reviews of DEWALT D55001 Synthetic Compressor Oil, 1 Quart Here

What are ya gonna do? DeWalt pretty much insists that you use their brand oil. And, given that synthetic compressor oil is nearly impossible to find, you may as well buy the OEM brand.

So, how does it work? It's the oil highly recommended (insisted on, actually) by the manufacturer for your DeWalt air compressor. Ya know what happens when you don't maintain the oil. Buy it. Change the oil. And forget about the outrageous price of it.

It keeps your DeWalt compressor humming and you can rest easy knowing that you didn't buy anything you "shouldn't" use.

Want DEWALT D55001 Synthetic Compressor Oil, 1 Quart Discount?

I choose this when initially purchasing the compressor, That compressor is easy to start and runs fine, A trusted recommendation from the manufacturer

Save 10% Off

Its a quality oil for your job-site DeWalt air compressor, get the most out of your machine by using quality oil.

Neiko Tools Water and Oil Separator for Air HVLP Spray Gun

• Eliminates Water, Oil and Foreign Particles From Compressed Air Line
• Attaches Directly to Spray Gun or Air Tool
• Button Release Valve Allows Easy Disposal
• Air Inlet: 1/4" NPT
• 90 PSI Maximum

The compressor filters work as advertised. I am in the process of painting my boat and needed to install filters to stop water and particles from entering my paint gun. I can see through the filters the amount of water and particles that this filter stopped. I did not have any issues with spray painting my boat. It would have been a disaster if I did not have these filters installed. They were the right price and are quality filters. I would recommend these filters to anyone needing to stop water and particles coming from their air compressor.

Buy Neiko Tools Water and Oil Separator for Air HVLP Spray Gun Now

I bought this separator to use with a siphon-fed spray gun I purchased. As with any air connection I make I used gas sealant tape (similar to Teflon tape) when i connected this to my sprayer. I do not have any other filter on my compressor line as I do not do much painting with it. This oil and water separator worked flawlessly to trap the moisture coming through the hose which meant I ended up with a flawless paint job. I was also painting on a some what humid day which would leave even more moisture in my compressor tank. This product is inexpensive enough that you could purchase several to install on other tools instead of swapping it out, or you could just install it on the end of your hose. I would not hesitate to purchase again.

Read Best Reviews of Neiko Tools Water and Oil Separator for Air HVLP Spray Gun Here

product as described shipped on time and met all my expectations what else can you say about a water separator

Want Neiko Tools Water and Oil Separator for Air HVLP Spray Gun Discount?

Highly recommended. Cheap and functional. Fit my gun with no problems. Since it's glass, you can see the build-up of contaminants it collects. I did not find any instructions for cleaning it, so I will probably throw it away when I'm done.

Save 63% Off

I installed this on a LVLP spray gun and so haven't seen any traces of water. Its very light so you can't even feel it on the gun.