Homax 4630 New Pneumatic II Spray Texture Gun with Hopper

• Sprays a variety of patterns and texture materials
• Includes hopper
• Air compressor (3/4 hp or larger) and HVLP compatible (80 cfm or larger)
• Capable of texturing an entire house, yet is also ideal for smaller remodels and small patch and repair tasks
• Lightweight

This simple little texture gun performed great for me to apply the orange peel texture I was hoping for. With the nozzle angled slightly upward, it applied texture to the ceilings as easy as it did to the walls. Plus I purchased the powdered sack of texture and mixed my own so the cost was kept to a minimum. I set my air compressor to approximately 40 lbs of pressure and never had a problem with the gun plugging up. Cleanup was a snap. Definetely a handy home improvement tool.

Buy Homax 4630 New Pneumatic II Spray Texture Gun with Hopper Now

Good small area texture gun. Purchased it for my brother he likes the adjustability for texture pattern. Fist one I recived was broken, returned it and promptly was sent a replacement.

Read Best Reviews of Homax 4630 New Pneumatic II Spray Texture Gun with Hopper Here

I am very surprised at what this could do. Repair jobs do not usually work out well for me, but this little machine was well worth the money. I was replacing wood shingles on the roof, when I put my foot through the slats and took out the ceiling below. I had to repair about 30 square feet, then replace the popcorn ceiling. I tried the small cans and they would have become very expensive for the area I needed to fix and they did not do a good job. So, I took a flyer on this and it worked fine. $37 for the machine and $13 for the texture what a deal.

I was very pleasantly surprised.

Want Homax 4630 New Pneumatic II Spray Texture Gun with Hopper Discount?

I've had 2 of these and the best thing about this gun is the small capable hopper. Other than that the gun broke apart after about 5 days of use. The plastic just doesn't have the strength to hold the weight of the mud for a long service life. If you need to retexture a house or a couple of rooms it's great. But expect to be needing a new one after that.

Save 20% Off

No chance it would do an entire house. In fact mine crapped out after 3 uses. Spend an extra $20 and get something decent.

Campbell Hausfeld PA2081 Air Lubricators

• Provides automatic line lubrication to extend air tool life
• Oil-fog design allows bowl to be filled without depressurizing system for easier convenience
• 3.5 oz quick-release bowl and quarter turn drain provide easier use
• 29 SCFM flow capacity @ 90 PSI

I know one of the previous buyers claims that he did not receive teh pictured oiler, but I just purchased one, and it's just like the one in the picture. Good HD unit, and it's working perfectly. I like that the oil flow is adjustable as well, I can control the oil usage so that it's not flooding the tool, but still sending a little bit of oil (I have had issues with this in the past with other brands)

Buy Campbell Hausfeld PA2081 Air Lubricators Now

This item works great and is a must when running air tools. The adjustable oil volumn allows me to adgust it to each tool i use.

Campbell Hausfeld HU3510 1.2 HP 20 Gallon Oil-Free Wheeled Vertical Air Compressor

• Operates over 14 air tools so you can sharpen lawnmower blades, rotate tires, perform engine repair and maintenance, inflate car and bike tires, paint furniture, install trim and molding, upholster furniture, build a deck, and more
• Easy-to-use 2-in regulator knob with soft touch points for easy, more comfortable pressure adjustments
• Easy-to-maintain tank drain with cup, conveniently located on side of tank (regular tank draining extends the life of your tank)

It worked great for about a a year and a half running a nail gun, airing tires, prep sanders, die grinders... Recently it started leaking air from behind the on off switch. It was very slow to build tank pressure, and once the tank pressure got up to about 40psi if it switched off, the compressor would not kick back on. The motor would just hum. It's about 6 or 7 months out of warranty so I took it apart. The main pressure line from the compressor to the tank attaches to a T & check valve assembly right at the lower port of the tank. That means just about everything had to be removed to get it off. Once apart I verified the check valve was stuck open. The check valve has a service port so I disassembled it and saw a small spec of rust on the valve & mating sealing service. Still not sure why it was stuck open but I cleaned it up and reassembled, now everything works again. If and when this valve gets stuck again I'll figure out a way to relocate that check valve so the compressor/motor doesn't have to be removed to service/clean the check valve.

Save 39% Off

Craftsman Z-D20659 Air Compressor Motor

• Five horsepower motor for air compressor
• This item replaces part number D20659
• 16-Inch long, 13-Inch wide, and 13-Inch high
• Package weight of this item is 13-Pound

Although I have not installed this replacement motor yet I have compared it to the old one and it appears that it will bolt up exactly like the old one. I purchased this motor at a great savings and it arrived to me in excellent condition.

Save 2% Off

Neiko Tools Water and Oil Separator for Air HVLP Spray Gun

• Eliminates Water, Oil and Foreign Particles From Compressed Air Line
• Attaches Directly to Spray Gun or Air Tool
• Button Release Valve Allows Easy Disposal
• Air Inlet: 1/4" NPT
• 90 PSI Maximum

The compressor filters work as advertised. I am in the process of painting my boat and needed to install filters to stop water and particles from entering my paint gun. I can see through the filters the amount of water and particles that this filter stopped. I did not have any issues with spray painting my boat. It would have been a disaster if I did not have these filters installed. They were the right price and are quality filters. I would recommend these filters to anyone needing to stop water and particles coming from their air compressor.

Buy Neiko Tools Water and Oil Separator for Air HVLP Spray Gun Now

I bought this separator to use with a siphon-fed spray gun I purchased. As with any air connection I make I used gas sealant tape (similar to Teflon tape) when i connected this to my sprayer. I do not have any other filter on my compressor line as I do not do much painting with it. This oil and water separator worked flawlessly to trap the moisture coming through the hose which meant I ended up with a flawless paint job. I was also painting on a some what humid day which would leave even more moisture in my compressor tank. This product is inexpensive enough that you could purchase several to install on other tools instead of swapping it out, or you could just install it on the end of your hose. I would not hesitate to purchase again.

Read Best Reviews of Neiko Tools Water and Oil Separator for Air HVLP Spray Gun Here

product as described shipped on time and met all my expectations what else can you say about a water separator

Want Neiko Tools Water and Oil Separator for Air HVLP Spray Gun Discount?

Highly recommended. Cheap and functional. Fit my gun with no problems. Since it's glass, you can see the build-up of contaminants it collects. I did not find any instructions for cleaning it, so I will probably throw it away when I'm done.

Save 63% Off

I installed this on a LVLP spray gun and so haven't seen any traces of water. Its very light so you can't even feel it on the gun.