New Pressure switch for air compressor 140-175 Four port w/ unloader & on/off lever

• Brand New LeFoo Pressure switch 140-175 Four port with unloader & on/off lever
• Factory set 140-175 psi
• FREE SHIPPING

This item filled my expections very well. It was easy to install, and the multipul ports were also very useful. The on/off lever made it easier because I don't have to turn the compressor off at the breaker any more. Thanks for a well made and user friendly pruduct.

Save 64% Off

Bosch CET3-10 3 Gallon 1 HP Mini Twin Angled Tank Air Compressor

• Vertically Angled Tanks-Enables better center of gravity for easy transport through-out the jobsite
• EZ Drain - One ball valve drain located in control panel for simultaneous draining of both tanks.
• Roll Cage - For maximum durability and protection from job-site conditions
• Recessed Control Panel-All gauges, regular, couplers, safety valve and drain valve are located in easy to access location and are protected from job-site conditions.
• Oil Lubed Pump-Extends product life for extra durability.

I bought this air compressor because mainly: it had a contractor grade pump, said it was well balanced for easy maneuvering around the jobsite, oil-lube pump, 79dB (decibel) 3 gallon twin stack (vertically positioned) for more free air and 2.6 CFM.

The good: this thing works well, and I found out it has 100% duty rating (or continous duty). I can use it all day and runs well and the pump doesn't seem to get too hot. It has a pretty fast pump up/recovery time, and pretty fast initial pump up. Not sure of the initial pump up stat, probally slightly over 1 min, revovery is probally around 16-18 seconds (not quite as fast as Bosch claims, but close. You can still sink nails even when the compressor is recycling, which is a plus, as some compressors won't counter sink nails until it fully recovers. I used it fine with an Omer 12.50 18 ga brad nailer (about 35-40) before it kicked in. It worked well with an Hitachi 15 ga nailer (possibly around the same number of nails, I stop keeping track). I also used a Craftsman utility coil nailer (2-1/4" ring shank) for 5/8" T-1-11 and worked well all day firing off coil after coil. Lastly, I also used a craftsman framing nailer for framing work, however after about 3-5 shots the compressor kicked in, but I pretty much used it all day long and was sinking the nails; very rarely did it leave a framing nail slightly proud. The compressor was recycling often while framing and shooting the coil nails, but it kept on giving me the air to get the job done. Now, I wouldn't hook into the CET-3 as a regular component for framing, and in a rapid fire nail off, but It was out for the finish work, so I used it, and did the job. The coil nailer used much less air per shot than framing and actually kept up decently firing in bump mode all day.

The Bad: this air compressor is awkward to move around. and fairly heavy too. It claims it's center of gravity is better because the tanks are vertically positioned making it to move around the jobsite. You have to reach in the middle for the handle, and rest the side of the compressor on your leg as you walk it. It is a Pain walking this thing up flights of stairs, so if you are looking for something small and light to do finish work, you can find another compressor. I found it actually much easier to grap it with two hands by the top roll bar/frame and rest the bottom plate on my belt buckle, it frees up your leg and you can take a full stride, up stairs or where ever. Decibels/loudnessit claims it is 79dB, well indoors it definately seems louder than that. Now, I obviously didn't have a decibel meter, but I have used the Senco PC1010 plenty times, and that is listed around 76-79dB (give or take a few) and that compressor is ridicuously quite. The Bosch is noticeably louder, and if the Senco is say 76dB no way is the Bosch 79dB. Also, if you are working in and old house with loose floor boards, it vibrates and can increase the noise and the unit can walk on you; so you'll need to put it on a stable, clean surface (not on a drop cloth or dusty floor, rubberized feet need to contact solid substrate). But also, with saying that, this unit is quiter than most and you definately won't go deaf or anything working next to it, and you can carry on a conversation with it running.

Last tip: the manual is very basic, probally written in Chinese and translated to English (to rationalize some of the wording/grammar issues) which makes you read a few parts twice. This unit is made in CHINA too, maybe some of the parts are made domestically (maybe not) but it is definately made in China, I emailed Bosch and they said it was made here in USA-WRONG!. Make sure you break-it-in correctly before putting it to use.

Very Simple:(1) Open drain valve (on bottom of front plate) twist 1/4" turn

(2) plug unit in and turn lever ON

(3) run the compressor for 20 min continuously

(4) after twenty min, close drain valve-letting tanks fill-when it auto turns off at 125 psibreak-in is done

(5) CHANGE OIL!!!!!! (they don't tell you this, but it only benefits your new purchase)

Things to remember-don't be stupid and check the freggin' oil level first before you break it in. And yes, immediately after you break it in, get that oil outta there and get some fresh oil back in, you'll see what i'm saying when you see how dirty it is. Best oil I found to use is: MOBILE RARUS 427 (about $8.50 1 qt) lasts many oil changes. It takes about 150 ml to fill. (how do I measure 150 ml? buy a clear plastic bucket with ml marks on it, fill bucket to line, use a funnel & pour)

Also, try to always run your compressor on a level surface, if the ground, or driveway etc is pitched/sloped you can ruin your compressor because the motor isn't getting lubed properly, the oil will pool to one side and the parts inside won't pick up any oil. level is the way to go.

OK enough ramblin' onIf you are looking for a small professional grade compressor to use on mainly finish work, with an occational coil/ light framing nailer (not a high speed nail off) and the extra weight of the compressor is no issue, it's perfect. BTW, the extra weight is mainly to do from the heavy duty pump and the heavy duty roll bar/frame design, two features most contractors will gladly trade off for the extra weight beacause this thing is built to last. If, on the other hand you do mostly light punch out work,quarter round, shoe, trim out 1 window here & there and want something very easy to pick up & move around without dealing with oil changes, buy another compressor. Quick other points: Bosch's drain valve is the best design, it functions by turning only a 1/4 turn to open or close. Not the threaded kind that sticks out at the bottom, can break off or threads can strip. Pressure/regulator gauges are small and you have to bend down low and get close to read. Tool pressure knob doesn't feel real solid, cheaper light gauge plastic. Rubberized feet are very spongey and solid to absorb vibrations well (if your feet where out, you have to replace them, believe it or not a key feature vital to a long duty life. Heavy duty pump-100% duty rating (use it all day long continously) check other compressors for duty rating, some are 50% so for say 5 hours on, you need about 5 hours off, or you'll be looking for another compressor shortly if you push them too hard. Heavy duty frame/roll bar design to take jobsite abuse. recessed gauges-keeping components away from damage (it looks like the regulator knob could snap off easily though.

I would buy it again for sure, because if I bought a smaller lighter unit, (like I was initially looking for) I would have been left high & dry because, as luck would have it my large compressor broke the day before, & the Bosch substituted fine for finish & light framing & siding work that had to get done.

Save 53% Off

Porter-Cable PC3PAK Finish Nailer/Brad Nailer/Stapler Compressor Combo Kit

• Innovative shroud allows for better protection and portability
• 150 psi max allows users to drive more nails than a traditional 135 max psi compressor
• 6 gal tank allows users to drive a large quantity of nails on a single tank charge
• 2.6 SCFM90 psi allows for quick compressor recovery time
• 2.6 SCFM90 psi allows for quick compressor recovery time, per ISO1217;34 lbs weight allows compressor to be easily carried

Let me start off by saying that the best price i found on this item is not on amazon but rather at home depot ($279), which makes this set a really great deal.

The compressor is likely the weakest link in this set. It is relatively noisy, although still much quieter than my 2.5hp 33gal craftsman, and there definitely are better options in this size.

Both nailers and the stapler are all superb. They're quiet and reliable. I am using cheap harbor freight nails and have not got a single jam in a few weeks of use. The depth adjustment is tool free and works very well on all three tools.

Overall, this is one of the best deals out there for a high quality nailer combo with a decent compressor.

Buy Porter-Cable PC3PAK Finish Nailer/Brad Nailer/Stapler Compressor Combo Kit Now

This is a nice combo pack for the weekend user or hobbyist. The compressor requires no maintenance... a definite consideration when buying. Everything is easily accessible for adjustments and connections. The unit is compact, fairly light and packs up well for mobility. Compressor is a bit loud but I can live with that for the price. There is no air nozzle included, you'll need to buy that separately.

Read Best Reviews of Porter-Cable PC3PAK Finish Nailer/Brad Nailer/Stapler Compressor Combo Kit Here

I hadn't as much as touched a nail gun prior to this purchase so I was a bit apprehensive at first. I was doing a remodel project and opted to do my own custom trim so I needed something for fast and clean nailing and finish nailing. This combo package was absolutely perfect for my project. Very easy to use and short learning curve. Quick-connect locking works great for switching from tool to tool very quickly. I liked the carrying case that it came with, makes for great storage of the guns and extra nails when not in use. The kit included most of what I needed I only added some accessories for some of the other cool things you can do once you haver a compressor in your home! I have had no issues at all and this has been a great decision for me. Based on some estimates I had done prior to my purchase this item paid for itself by the time I finished doing the trim in my second room. Based on my usage so far I am pretty sure the quality of this Porter Cable product will stand the test of time at the least, long enough for me to finish my project.

Want Porter-Cable PC3PAK Finish Nailer/Brad Nailer/Stapler Compressor Combo Kit Discount?

I'm very happy with my purchase of this kit. My dad does remodeling for a living and I've had alot of experience helping him out and using his expensive and professional tools so in general I'm difficult to please when it comes to tools, but I'm very happy with this purchase. I really like the fact that everything you need is included. I don't like having to go buy pieces in order to fit everything together. The only thing someone might need to go buy for this kit is a longer and maybe more durable air hose (this one works fine and is 25' long but stays curled up and doesn't actually stretch out to a full 25', probably more like a little under 20'.

When you are looking for a compressor, probably the number one complaint you are going to hear is that some of them are very loud. Well, I've used about ten on different job sites and at peoples houses helping them out and all of them have been loud. Some maybe slightly louder than others, but that just comes with the territory. An oil-less style compressor is always very loud. It doesn't bother me, but if I'm using a loud tool for an all day project I do like to wear ear plugs, and highly recommend it to others.

The compressor was easy to set up, worked just fine, has plenty of power, the controls are easy to use and shouldn't pose a problem to someone that hasn't used one before if they just read the manual quickly and is surprisingly light-weight. It fills up with air pretty quick too, so any of the guns it comes with you'll be able to do continuous work with without having to pause because the compressor is running out of air too fast. You might have this problem (as I've had before with other compressors) if you try to run a framing nail gun with this compressor. It could use up alot more air and you might have to wait to let it fill up, but it should have the power to shoot a framing nail gun with no trouble, which is something I like.

I have used all of the nail guns multiple times and they have performed flawlessly. I always shoot two or three practice nails into spare wood, adjust the depth on the gun to make sure it will get the nail or staple all the way sunk into the wood, and then I get to work. I've never had any of the guns jam and I've used probably 10000 nails on the 16 gauge gun and probably half as many on the brad nailer (judging by the number of boxes of nails I've purchased and used). I haven't had to do any maintenance on them or anything like that. I just blow them off before picking them up when I'm done with them. They don't feel quite as sturdy in my hand as some of the other brands that I've used but when I'm actually working with them, their performance is very good. The one problem I do have is that the little rubber tips on all of the guns are easy to knock off. If you don't store them carefully and are careful with them when using them you could easily knock them off. I don't like this because often I am using them for trim work, and that plastic is the only thing stopping the gun from putting dings in the trim as I'm putting it in. I've been able to keep track of mine so far, and have had to superglue one of them back on, but in my opinion, that's a small complaint for such an affordable set, and to be fair, it's a common problem. Probably the majority of the nail guns I've used over the years have had their rubber or plastic tips removed. With a little bit of care it's not that hard to keep track of them though, and I might be a little bit more picky about that than most.

In summary, I've owned the package for a year and a half and have been very happy with it. For a DIY type person this is more than enough power and doesn't break the bank, and I really like that. If I were in construction and used this kit every single day, I might would suggest a more heavy duty set, but I think this kit is an amazing deal for someone that is doing small home jobs or if you are like me and renovating your house.

I bought this combo pack in 2008 at a box store. I used it for various home-improvement projects, and found it a pleasure to work with... and then the compressor began to continuously leak air. (The three air tools all seem to be fine, including a heavily used stapler).

Seems ok quality for a few projects, but based on my experience, and other negative reviews here and on the compressor's page, don't expect the compressor to last.

1 star for the crummy compressor, 4 stars for the tools. The combo kit is still a good value for starting out.