Campbell Hausfeld MP2920 5-Piece 1/4-Inch Quick Conn Kit

• 5-piece 1/4-inch inner diameter coupler and plug kit
• Set of components will allow you to set-up 4 tools for quick connection to the coupler
• Fittings provide 100-percent more airflow for more power to the tool
• Set includes 1 coupler 1/4-inch NPT(F) and 4 plugs 1/4-inch NPT(M)
• 2.8-by-1-by-6.5-inches; ships at 1.6-ounces

Good for home mechanic use. Solid, heavy, and well made. They are all steel except for a part inside the coupler. The coupler body is not brass even though it looks like brass in the picture. Made in chinA.

Buy Campbell Hausfeld MP2920 5-Piece 1/4-Inch Quick Conn Kit Now

I've purchased some of these with 3 bearings and they don't maintain a solid connection. This one has 4 bearings and i'm satisfied with its performance.

Read Best Reviews of Campbell Hausfeld MP2920 5-Piece 1/4-Inch Quick Conn Kit Here

Works great. Make sure you use some teflon tape when installing to avoid any slight leaks. Also one thing to note, this isn't the "quick connect" style connector that allows you to just press the tool onto the connector. You actually have to pull the collar back, press the tool on, and slide the connector back into position. However, it serves its purpose just fine and does not leak any air.

Want Campbell Hausfeld MP2920 5-Piece 1/4-Inch Quick Conn Kit Discount?

The coupler is a quality item. Note the bearings ....... you won't find these bearings in couplers sold by Harbor Freight. No leaks! The plugs can be purchased anywhere, as they are a standard/universal dimension. It is the coupler that is the key component to a leak-free air system.

Save 33% Off

Can't beat this kit for the price... And free shipping! Just apply teflon tape to threads, and attach your fittings. These work like they're supposed to...

DEWALT D51276K 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer

• Sealed Lube Dual Tech: motor works as an oil free and oil lube unit.
• Tool-free features: adjustable belt hook, nail depth adjustment, jam clearing, 360 degree exhaust
• Uses 1-inch to 2-1/2-inch (25.4-milimeter-65-milimeter) 34 degreecollated nails, rear load;
• Includes carrying case, sample finish nails and safety glasses
• Low profile no-mar pad;Sequential action trigger installed

This is the one.

I had the oportunity to try several 15 guage nailers after deciding that my 16G Porter Cable could not do the job I wanted it.

Don't get me worng. My PC is the best 16G nailer in my arsenal but I needed something more.

I tried the Hitachi 15G, the Senco, and the Bostich.

I then tried the Dewalt and I was hooked. I was ready to buy the Hitachi, but the Dewalt went down to a 1" over the Hitachi 1 1/4" and the balance of the Dewalt just felt better in my hand. I also liked the feel of the trigger, plus the fact that I could access the depth adjustment more readily on the Dewalt over the Hitachi.

I have run about 16 hours of work with the tool so far and I am very happy with it. I run it with oil, since there is no better way to protect the seals and rings. I know that Dewalt advertises that you can run the tool without oil, but do not do it. You will just eat away at the life of the seals and piston rings.

No doubt a winner. Much improved over its previous D51275K.

Buy DEWALT D51276K 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer Now

I bought this nailer 4 months ago and went around and around trying to get nails that worked with it. The angle on Senco DA nails is slightly less than the nails that came with the nailer. I also tried a few after market nails--same deal. Finally I ordered Bostitch DA nails and they are exactly the same as the ones that came with it. Probably they are purchased by DeWalt for the kit. The Senco nails even say that they are for this gun on the package. They shoot 3 or 4 times and jam. Bostitch run great.

-Matt in Wisconsin

Read Best Reviews of DEWALT D51276K 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer Here

This gun is very smooth, it sets the nail just right.

I have used several differant guns professionally and this one is very desireable. If you want to save $20 and get junk that will jam at crunch time buy somthing else. If you want reliable smooth quality get this one....

Want DEWALT D51276K 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer Discount?

I bought this nailer used in mint condition on Amazon. Seems to work fine. I am using Porter and Cable 2 1/2" nails and it shoots them well if you don't slam the nail bolt forward. If I slam it the nails seems to wedge in the delivery ramp and don't feed. A minor thing but it took me a minute to figure out why it was only shooting one nail and then stopped. Since then I've used it with no issues.

Save 54% Off

Bought this to install new hardwood flooring in a rental condo we were renovating and couldn't be happier with my choice. It is easy to use, well-made and I'm certain will last for many, many years to come. I'd never installed hardwood flooring before and after a few test "shots" into some scrap plywood I was successful in laying 120 square feet of 3/4" Maple and 25 square feet of Brazilian Redwood with nary a glitch. Getting the correct angle on the "tongue" of hardwood flooring is really the only skill you need to learn and, once you've got that, it's a breeze and you'll be installing floors that look truly professional.

Surebonder 9600, Heavy Duty Staple Gun with Case

• Use Surebonder #4 series, Arrow T-50 series or Stanley TRA700 series Heavy Duty Staples
• Drives 1/4" through 9/16" heavy duty staples
• Safety mechanism prevents accidental firing
• Quick release magazine for easy loading
• Adjustable air exhaust and staple viewer

I purchased this Surebonder 9600 stapler to use for completing an exterior remodeling job involving a lot of aluminum trim. I considered electric staplers but I needed the ability to finely regulate the striking force to make sure that the staples didn't shoot all the way through the aluminnum as well as that they didn't end up getting only partially sunk. Electric staplers don't provide very good regulation compared to an pneumatic/air tools. This stapler worked great. Worth every penney of its ridiculously cheap price. As far as I know Surebonder is the only company making an air powered stapler that is compatible with standard Arrow T50 fine wire staples. I highly recommend this product.

Buy Surebonder 9600, Heavy Duty Staple Gun with Case Now

Surebonder 9600 Pneumatic Fine Wire Staple Gun with Carrying Case

Picked this up for 28.60 shipped. I loaded standard, easy to find, Arrow T-50 narrow crown staples in and set my compressor to 100 psi (max it's rated for) since that is what my roofing gun likes to run at. This way I can run both guns off one tank setting on the roof. I sent two drops of pneumatic gun oil down the inlet. I also added a ball swivel connector (Lowes or Amazon) so that the hose flops around more freely off the gun. I then ran 200 staples through it into very old and hard fir and some super old oak at an unrealistic pace (fast as I and it could go) and it only fired a blank twice. What a great little machine. I need to restretch Harley seat leather on a plastic pan so I tested it on an old plastic pan with perfect results.

I'll add to this review for durability ratings after I've done an entire house roof with felt and batt insulation later this year, but with it's compact and sturdy construction I think it'll be fine for those applications. I have a lot of expensive quality tools, and this inexpensive little gun is going to probably turn into one of my favorites because it'll remind me that now and then you don't have to break the bank to get something that works the way it should. Great buy.

UPDATE: ONE YEAR AND ONE HOUSE LATER. This tool has never let me down and has been used extensively. It spent a lot of time on the roof getting tossed around. Insulation is a breeze a standard hammer tacker is just too brute force around insulation. Bunch of other little projects. Tough little guy. It has jammed only once in thousands of staples and it was due to the air pressure being much too low, not the gun. If you shoot a blank, its about 99.9% certain you didn't have the little tongue depressed all the way.

Only one problem this thing shoots staples so quickly and easily that you tend to blast through more staples than you need to.

UPDATE 21Mar2010: Still banging staples, and a pleasure to hook up to the hose. What a great little gun. Did that Harley seat modification and it worked fine sinking staples in the plastic seat pan. Have had three 'all-stop' jams in not less than 20,000 staples. One was the previously mentioned low air pressure. The others give the same result (a little piece of staple stuck on the firing pin). It is very obvious but it takes a little operation to pick that little wedged piece out of there. A non-issue really as the jams were simple to clear and who knows why the staples exploded... did they hit a nail, or was that particular staple a reject? I'll take one of those jams every now and then for a roughly thirty dollar gun, and 20k staples.

Read Best Reviews of Surebonder 9600, Heavy Duty Staple Gun with Case Here

Got this redo the seats on my jetskis. Works great. No more pushing like crazy to compensate for the kickback on electric staplers. I redid one seat w/ an electric and had probably 10% bad inserts. The seat base is pretty thick plastic and the staples loved to turn if you didn't give it major push when firing, but even then sometimes wouldn't go. No worries with this guy. Did a big seat and didn't have a single bad insert. Just hold this in place and let it rip, no upper body workout required. I've probably shot about 700 staples and it hasn't jammed yet or let a staple turn strange (except when I had bad angle, basically my fault). I'd definitely buy this again.

Want Surebonder 9600, Heavy Duty Staple Gun with Case Discount?

So far I am happy with my 9600. It works great on many surfaces. But do not buy the staples with it. The ones Amazon advertised to go with the 9600 are surebonder 300-38-5m 3/8-inch 22 gauge upholstry staples. They DO NOT FIT. Amazon change your ad!!!! F.Y.I. go to a home improvement store and by the Arrow T-50 staples. They FIT and work great and are available in multiple lengths as well as light duty to heavy duty, Arrow also makes a rustproof staple!

Save 38% Off

I am a DIYer and using this stapler to install insulation in the basement ceiling. The stapler is light and compact, and has worked perfectly well for me, no misfires. I have Milwaukee and Senco nailers, both high quality, and this stapler has so far worked as well as either of those, for a fraction of the price. The company has also re-worked their instruction manual so that it is now written in comprehensible English. The Arrow T50 staples I used worked just fine. Perhaps the only down side to this stapler is the capacity. It is so easy to use that I have fired more staples than the job might require, towards ensuring the insulation stays where I installed it. While Surebonder has a similar gun with greater staple capacity, at a slightly higher price, I am happy with mine despite having to replenish staples more frequently.

Update 11/24/08:

After approx 3,000 staples, the unit crapped out. I was 97% complete with a project stapling insulation to the basement ceiling and the unit seized and would no longer staple. Fortunately I had the old reliable Arrow stainless steel manual stapler to finish the 100 or so staples that completed my project. The Surebonder was great while it lasted, making my job so much easier, but 8 days and 3,000 staples later, I have an ungainly paperweight rather than a pneumatic stapler.

After advising Amazon of my plight and being told by them to go away, and contact the manufacturer, I had little choice but to do just that. I contacted the manufacturer to advise of my problem, and to my delight, they responded right away with an offer to repair the stapler. I was surprised at Amazon, but the manufacturer made up for it with their handling of the situation. Kudos to them.

New Pressure switch for air compressor 140-175 Four port w/ unloader & on/off lever

• Brand New LeFoo Pressure switch 140-175 Four port with unloader & on/off lever
• Factory set 140-175 psi
• FREE SHIPPING

This item filled my expections very well. It was easy to install, and the multipul ports were also very useful. The on/off lever made it easier because I don't have to turn the compressor off at the breaker any more. Thanks for a well made and user friendly pruduct.

Save 64% Off

Compressor Saver Hard Start Capacitor Model CSR U3

Easy to install. You can save approximately $200.00 by doing it yourself. Expect a few more years out of the current compressor. Installed on a Goodman 5ton unit.

Needed my 5 ton ac to work off my generator, 5-2-1 Hard Start CSRU3 allowed this to happen, easy to install and works great.

Buy Compressor Saver Hard Start Capacitor Model CSR U3 Now

Preassembled unit, easy to follow instructions, if you are technically oriented. I would not recommend this for the non-handyman due to the 220 voltages involved.

Price of this part was less than 1/4 of what the Carrier dealer quoted me for a hard-start kit.

If you don't have a hard start kit on your condenser, this should prolong the compressor life at small cost.

Read Best Reviews of Compressor Saver Hard Start Capacitor Model CSR U3 Here

I added this to a Goodman 4 ton unit that was having a hard time starting. I was drawing around 123 amps before adding this unit. After the install it now draws under 60 amps on startup. I saved around $250 by buying this and installing it myself vs. having the HVAC do it. Very happy with the product.

Want Compressor Saver Hard Start Capacitor Model CSR U3 Discount?

I have a old Rudd 10 Seer 4 ton , AC that has a listed LRA of 131 amps. Average start amps on the amp meter was around 120. After I installed the Compressor saver (u3 Model) the crank amps were consistently measured around 40 amps. I was amazed. I installed it so I could start the AC with my portable (12,000 watt -50amp generator). Before install the generator would not come close to starting the AC, after install the AC started easily and ran at about 18 amps. Also easy to install. Great Product would recommend to all.

GOODYEAR 46504 3/8-inch by 25-feet 250 PSI Rubber Air Hose With 1/4-Inch MNPT Ends and Bend Restrict

• Solid Brass end Fittings: 1/4-Inch MNPT
• Spiral Synthetic Yarn Rinforcement and Abrasion-resistant Rubber Outer Jacket
• Bend Restrictors Prevent Kinks near end Fittings
• 100-percent Made and Assembled in the USA
• 10 Year Guarantee

Goodyear Yellow Hose 250 PSI 3/8 x 50 Feet

This hose is made of high-quality industrial grade reinforced rubber, instead of vinyl. It remains soft and flexible and is easy to get it to lay flat on the floor so you don't trip on it. See Customer Images for an example of its flexibility; it's also like that in the winter time. It's also easy to feed it onto a hose reel, or to coil it up by hand.

Vinyl hoses, or even rubber hoses coated with vinyl are stiffer than this one and are more difficult to lay flat; polyurethane hoses are stiffer still.

I tried a "Task Force" brand air hose from Lowes (made in China) that was "reinforced rubber", but it split open in under a year. The entire surface was full of cracks the point is, all rubber hoses are not created equal.

Goodyear demonstrates their confidence in this product with a 10-year guarantee.

I've used all types of air hoses and can confidently say this Goodyear hose is the best. It's durable and stands up to the wear and tear of job-site use. It comes with perfectly attached 1/4" threaded solid brass fittings and the hose ends are reinforced with 5" long bend restrictors to prevent kinks near the fittings. The bursting pressure of this 250 PSI hose is over 1,000 PSI.

This hose is made and assembled in the USA.

Buy GOODYEAR 46504 3/8-inch by 25-feet 250 PSI Rubber Air Hose With 1/4-Inch MNPT Ends and Bend Restrict Now

The 25' hose states that the item has "Bend Restrictors Prevent Kinks near end Fittings." The hose that I received did not, in fact the hose looked to be in used condition and did not have any sort of packaging. The hose may be a previous return, be aware that the pictures may not match the hose you receive.

**update**

The above review was not due to the manufacturer, but to best deal tools sending me the wrong hose.(46501) I returned the item, purchased the 300psi model (46544) and reordered the 250 psi model 46504 (fulfilled by amazon.)

The 46501 model is very similar to the 46504, but does not include the bend restrictor. The 300psi model is thicker than the 250psi model, but is also a little stiffer. I like the 46504 model because it is easier to use on a daily basis. I'll be keeping both because of their quality and the increased flexibility of having 50ft total.

MIT seemed interested by replying to this review, but did not seem interested in replying to the email they asked me to send.

The bottom line: product goes from 2 stars to 4 stars based on quality of product. Missed a 5 star due to customer service.

Read Best Reviews of GOODYEAR 46504 3/8-inch by 25-feet 250 PSI Rubber Air Hose With 1/4-Inch MNPT Ends and Bend Restrict Here

I replaced my old air hose that was not rubber, often got tangled up, would rarely unravel without probelms, with the Goodyear 3/8 inch hose. The rubber hose is worth the extra few $. I store it in my garage, and even the winter temperatures don't phase it. Only had it a month, so durability is uncertain, but everything to this point is outstanding. Highly recommend!

I'm adding onto this review as it's almost a year later (Dec 2012), my air hose has been through the heat of summer and already some freezing temps of winter, yet I use it on all my needed projects and it's worth every penny spent. Still highly recommend

Want GOODYEAR 46504 3/8-inch by 25-feet 250 PSI Rubber Air Hose With 1/4-Inch MNPT Ends and Bend Restrict Discount?

This air hose is perfect for on the job, it works great in cold weather and does not kink up or is hard to move like most hoses

Save 45% Off

Great quality hose, beware of the knockoff goodyear brand...This hose stays soft and wraps up nicely even when it is very cold....

New 1/4" ASME Safety relief Valve 200 PSI American made

• 1/4" Safety Valve 179 SCFM - 200 PSI
• Free Shipping
• 51 mm Tall x 17.5 hex
• ASME Certified & stamped w/ UV & UB stamps

Yes, you could pop a cork or two without a safety valve of some kind. This brass American made valve is made for air compressors, or better stated for air receiver tanks. At the stamped rating of 160 SCFM of flow, this safety valve is very good for what I need on the 60 and 80 gallon tanks of my two compressors, and can quickly relieve an excessive pressure on them. It also comes with pre-coated sealant on its 1/4" MNPT threads.

You've probably wondered just how the value is determined as many compressors make air set to a maximum of 120 PSI to 175 PSI. For whatever the pressure head is set for or can reach, it's the tank rating you use to select your compressor safety valve. You should be using an ASME rated tank, and that PSI rating will be found on an attached plate as its maximum pressure. On unrated tanks, you should use the manufacturer literature or select a safety valve no more that 10% higher than the factory has the cut-off pressure set for. Some think it's a game they can play using the higher rated saftey valve and changing their compressor regulator to a higher pressure. They think that will add performance, but it is only a deadly game.

Unfortunately, using the compressor to build higher pressures only burns up the motor, wears the compressor out faster, uses more power, and creates a deadly situation. An exploding air tank can kill and destroy much around it just like a bomb going off. The safety valve is there to help prevent this, but it can't help a weakened tank that has internal rust damage that has gone too far. Have any pinhole leaks in the tanks bottom side? Does the metal sound different in places when tapped with a small hammer? Get rid of it! They are not repairable and will not operate safely even if using lower pressures under 100 PSI. Water builds up in all tanks during their use. Optimally, it should be emptied often while the tank is in use and should be drain off when the compressor has been shut down. Never leave any water in an air receiver tank.

To check a tank, fill it full of water and pressurize it to see if it leaks or holds at its rating water doesn't compress like air, so a rupturing tank filled with water is less dangerous. Actually, the smart thing to do is have a professional inspect the tank.

Ok, my tank is a brand new replacement the old one had a pinhole leak and I opened the inspection covers and found it to be in bad shape after 30 plus years of use. The new tank is rated 200 PSi @ 650 degrees Farenheit. This 200 PSi safety valve is just what it needed. My compressor is a 175 PSI 2-stage model, but the motor I use is an old rated 2 Hp. That motor is actually a 3 Hp. The motor would overheat and stop before 200 PSI could be reached. So, why I used a 200 PSI safety valve, and not one smaller? Over time a safety valve can lose its calibration and leak at a lower PSI, so you match it to the tank rating to prevent leaks.

Remember I mentioned my new tank was rated 200 PSI @ 650 degrees? Air expands with heat. Should my tank temperature ever get high enough to create pressure in excess of 200 PSI, this safety valve will drain it safely. Safety vales come with all different pressure ratings never exceed what the manufacturer used if yours has become faulty over time.

Oh, and just because my compressor can make 175 PSI, I never set its cut-off pressure that high. A 100 PSI cut-in and a 140 PSI cut-out pressure keeps enough air presure for all my various air tools to stay at their rated CFM and pressures and my compressor and motor never runs hot. Running hotter would also keep more water vapor in the air instead of allowing it to condense out to the botton of the tank. A filter/dryer/and regulator sees to it the air going to my tools is dry and regulated to the pressure required by each tool for a long operation life. Keeping the tank heat down will also extend the life of the safety valve.

There are un-rated safety valves that are user adjustable to different pressures. Using an un-rated tank and or safety valve in a workplace is against the law in most locals. The type valve here is AS250M. This safety valve is ASME rated and has two stamped indentations in the housing body to prevent resetting to a different pressure and it meets OSHA requirements. Manufactured by STEUBY MFG. ST.LOUIS, MISSOURI USA!

Save 50% Off

Makita T-01133 1/4 by 50 Polyurethane Contractor Air Hose

• Up to 2X Lighter than Heavier Hoses
• Highly Flexible and All Weather Resistant
• Up to 3X More Durable than Plastic Hoses
• Less Resistance when Dragging
• No Tangle and hassle-Free memory

I'm using 50 feet hose around the house and it's great! Lightweight and durable at the same time. It also says Made in U.S.A on mine. Makita makes good tools and I own lots of them. Most of my friends who are professional contractors use Makita. Our local grocery store has just been remodeled and to my surprise, every time I walked in I saw workers with Makita tools :)

Buy Makita T-01133 1/4 by 50 Polyurethane Contractor Air Hose Now

I have the 100'er and really like it thus far. Solid construction and doesn't tangle the way a lot of polyurethane hoses do. Give it a try and you won't regret it.