Iron Horse IHHD103L-AK 3.2-Gallon 125 PSI Max Hot Dog Air Compressor

• Hand Carry Model
• Direct Drive Air Compressor
• Comes with a 25-foot air hose
• Comes with a 20-piece accessory kit
• Easy to use and move

We bought this air compressor to power a piece of equipment that we use at our candy company. First off, this was the cheapest and smallest model that we could find that would provide 5.1 CFM at 90 PSI; we chose it over others simply for that reason. When it got here though, you'd have thought we bought the top of the line model. It was packaged very well and came with all the accessories that you could need. Setup was very simple; we were using the compressor less than 45 minutes after we took it out of the box.

Buy Iron Horse IHHD103L-AK 3.2-Gallon 125 PSI Max Hot Dog Air Compressor Now

Purchased product in September (not from Amazon)and used it approx 4 times to blow off a radiator in a tractor, used just blowing compressed air onto hay/straw chaff, for less that 30 minutes each time. Also used to inflate four passenger truck tires. Unit quit working abruptly (seems electrical, would not start). Returned to store, they gave me a replacement I was happy. Used replacement to fill up another four truck tires. Took it to use to help my brother do some framing as his compressor was busy at another job site, this thing wouldn't start up again on me, returned to the store for full refund. Lost time is very expensive. If anybody has any suggestions of a small portable compressor good for blowing off rads, blowing up tires and light carpentry pneumatic work please send me your suggestions. It will not be another of these units.

Read Best Reviews of Iron Horse IHHD103L-AK 3.2-Gallon 125 PSI Max Hot Dog Air Compressor Here

The size, rated CFM, cost, and accessories combination is really attractive in this unit. If it really does put out 5.1 CFM it can run a reasonable number of air tools making it more than a tire and ball filler. It comes with a real 25 ft hose rather than one of those little plastic coiled things which are not very useful and tangle in everything. So, because of this I ignored all the warnings about bad packaging and arriving damaged rationalizing that people are more apt to leave a review when they are unhappy with the product. The product is shipped in the vendors box which means that Amazon really can't do much about it besides simply stop selling it. The box was mildly damaged but upon removing everything, here is what I found. The inside of the box and the unit were covered with oil. The bottle of oil that is supplied was not leaking. It seemed to be oil from the unit that maybe residual from when they operated it at the factory to see if it worked and then drained it. The oil cap on the compressor was very loose so oil definitely could have leaked out. One of the pressure gauges was broken, the pressure regulator fell apart in my hand when I tried to adjust it, and the tank drain valve also broke when I tried to operate it. In this state it is inoperable and a candidate to simply return to Amazon. So why did I give it three stars rather than one you ask? Because I fixed all the broken stuff and it now seems to work pretty well and is not too loud for a small direct drive compressor. So, if you really aren't very handy with tools and such I would recommend that you do not purchase this unit. It very likely will be broke when it arrives. If you are willing to take a chance and make some repairs ie spend another $30 on parts, then you may really like this unit. Even though I just went down to the local building supply store and purchased parts, I still plan to call the vendor to see if they will send me replacement parts. At least then I will have some spare parts.

Want Iron Horse IHHD103L-AK 3.2-Gallon 125 PSI Max Hot Dog Air Compressor Discount?

As others have reviewed the compressor is not bad, although packing of unit is the most uncaring I've seen. If you order this I can assure you that pressure gauges will be destroyed and possible plastic cover will be cracked as mine was. I needed to use the compressor and did not return it like I should have. I could have picked up a unit at a local auto parts store for less money and be assured item was not damaged. Once I replaced gauges and tightened all fittings (teflon tape was included in massive amounts) filled with oil and being thankful that the requlator and pressure switch was undamaged in shipment, the unit ran well and strong.

Like many customers, I read the reviews on this item and discovered that I should have paid more attention to these reviews. The air compressor arrived and the box was oil-soaked and damaged. The box lid was open and the UPS delivery person stayed and had me look inside the box to check for other damage. The entire unit was covered in oil and the packaging was non-existent as the compressor was sitting loose in the box without any support. I notified Amazon.com and they have been very helpful in addressing the issue, so no complaints with them at this time. It is frustrating to receive an item that is damaged, especially when you need the item to complete a job.

Grip-Rite GR254CTS 2HP 4 Gallon Twin Stack Compressor

• Oil-splash lubricated
• 3450 RPM
• Compact twin tank stack design
• Industrial grade motor with ball bearings for greater durability
• Heavy duty pump with cast iron cylinder

I have had this compressor for over a year now. It has done everything I have asked it to do. It is a bit loud. Always fires up. Have not had any problems with it. I use it for automotive tools. Air guns, die grinders etc. Easy to move and carry around. Has oil in the motor for prolonged life. A good quality product for the price.

Buy Grip-Rite GR254CTS 2HP 4 Gallon Twin Stack Compressor Now

This compressor is LOUD. It also had an air leak at the weld on the tanks, which leads to beleive that it was shoddy manufacturing. I sent it right back and purchaced the Hatachi EC119SA. This compressor is quieter and feels and sounds solid. It is a little heavier,but compared to the alternative I would gladly choose the Hitachi hands down. I am in construction and so far it is working fantastic.

Hitachi 19210B 8-Ounce Synthetic Compressor Oil, 12-Bottles

• Comes in a 12-pack
• Use with Hitachi tools
• 8-Ounces per bottle
• Essential for regular maintenance
• Comes with a 30-day limited warranty

I am writing this review in effort to clarify what the difference is between Hitachi 19210 compressor oil verses Hitachi 19210B compressor oil. The short answer is they are both one of a kind, 5W-50 synthetic compressor oil. Hitachi added the "B at the end designating Bulk.

For those who are interested in the long version, read on. I ordered a 12 pack of Hitachi 19210B compressor oil through Amazon and received a 12 pack of Hitachi 19210 compressor oil as labeled on the bottles.

I called Hitachi's 1-800-706-7337 (USA Power Tool) number that Friday evening and asked the rep to please tell me what is the difference between Hitachi's 19210 and 19210B versions of this compressor oil is.

The response was the 19210 has been discontinued and replaced by the 19210B version. The rep had no further information spec wise and suggested I speak with Hitachi's Tech Support team but unfortunately they left for the evening and would not be back until next Monday.

That night after reading two reviews at Amazons site selling individual bottles of 19210B, I too had the same concerns expressed in both of the reviews, is this a 10W-30 oil or seeing the 19210 has been discontinued, how old is the oil I received? I did not want to risk using this oil in three Hitachi compressors I own.

Convinced that there is a difference, I contacted Amazon that night and explained my issue. The Amazon rep was very polite, sympathetic and helpful. My original order was reordered with the expectation that I will receive 12 bottles labeled 19210B. I receive shipment today and on the sealed box there was a label stating "Hitachi 19210B 8 ounce synthetic compressor oil 12 bottles". The box was opened and all 12 bottles are labeled 19210.

I called Hitachi and asked to speak with a Tech Support rep. I asked the Tech Support rep what is the difference between 19210 and 19210B. The answer was there is no difference. Hitachi changed the model number by adding a "B" to indicate bulk. The silk screen label on the bottle was never changed and will read 19210 and further stated that this compressor oil is synthetic 5W-50 compressor oil.

Save 33% Off

Pressure Regulator

I replaced my OEM regulator after about five years. Same brand. New one works great. A bit of adivce...I installed a shut off valve between the tank and the regulator so pressure is no longer on the regulator 24/7. I leave my shop compressor on all the time so I have air whenever I need it. Old configuration had the shutoff valve after the regulator. Constant 90 psi pressure likely lead to the old regulator's seal failure after 5 years, which I believe is testimony to the OEM valve's quality. With new valve configuration, my tank holds full pressure for more than a week when not in use.

New Magnetic Motor Starter Control for electric motor compressor 5hp 1ph 230V 34 amp

• 5hp single phase 220-240volt coil range 34 amp contactor
• FREE SHIPPING
• IEC stlye starter requires no heater elements.
• amperage dial allows you to dial your own required amps between 22-32 amps
• built in Auxillary contact

Needed to replace the starter on 5hp air compressor. This was the best price I could find and it works fine. One star off because the only wiring diagram it came with was for 3 phase power this unit only works with single phase. That meant I had to puzzle through the set up and do a test hook up before installing, so it took longer than it should of.

Save 64% Off

5 HP 3450rpm R56Y Frame 208-230 Volts Replacement Air Compressor Motor - AO Smith Electric Motor #B

• 208-230 volts 22.0 amps 60hz
• Open Drip Proof - Ball Bearings - Service Factor 1.15
• Non-Reversible - CCW Rotation facing the shaft
• Flat Rigid Base Mount - Manual Overload Protection
• Shaft: 7/8" diameter x 2 1/4"

My husband asked me to order this for him and it arrived faster then we could say "what"? Was purchased to replace something or another in his compressor , he replaced it with this, and he's happy again. PERFECT transaction!

Porter-Cable PC3PAK Finish Nailer/Brad Nailer/Stapler Compressor Combo Kit

• Innovative shroud allows for better protection and portability
• 150 psi max allows users to drive more nails than a traditional 135 max psi compressor
• 6 gal tank allows users to drive a large quantity of nails on a single tank charge
• 2.6 SCFM90 psi allows for quick compressor recovery time
• 2.6 SCFM90 psi allows for quick compressor recovery time, per ISO1217;34 lbs weight allows compressor to be easily carried

Let me start off by saying that the best price i found on this item is not on amazon but rather at home depot ($279), which makes this set a really great deal.

The compressor is likely the weakest link in this set. It is relatively noisy, although still much quieter than my 2.5hp 33gal craftsman, and there definitely are better options in this size.

Both nailers and the stapler are all superb. They're quiet and reliable. I am using cheap harbor freight nails and have not got a single jam in a few weeks of use. The depth adjustment is tool free and works very well on all three tools.

Overall, this is one of the best deals out there for a high quality nailer combo with a decent compressor.

Buy Porter-Cable PC3PAK Finish Nailer/Brad Nailer/Stapler Compressor Combo Kit Now

This is a nice combo pack for the weekend user or hobbyist. The compressor requires no maintenance... a definite consideration when buying. Everything is easily accessible for adjustments and connections. The unit is compact, fairly light and packs up well for mobility. Compressor is a bit loud but I can live with that for the price. There is no air nozzle included, you'll need to buy that separately.

Read Best Reviews of Porter-Cable PC3PAK Finish Nailer/Brad Nailer/Stapler Compressor Combo Kit Here

I hadn't as much as touched a nail gun prior to this purchase so I was a bit apprehensive at first. I was doing a remodel project and opted to do my own custom trim so I needed something for fast and clean nailing and finish nailing. This combo package was absolutely perfect for my project. Very easy to use and short learning curve. Quick-connect locking works great for switching from tool to tool very quickly. I liked the carrying case that it came with, makes for great storage of the guns and extra nails when not in use. The kit included most of what I needed I only added some accessories for some of the other cool things you can do once you haver a compressor in your home! I have had no issues at all and this has been a great decision for me. Based on some estimates I had done prior to my purchase this item paid for itself by the time I finished doing the trim in my second room. Based on my usage so far I am pretty sure the quality of this Porter Cable product will stand the test of time at the least, long enough for me to finish my project.

Want Porter-Cable PC3PAK Finish Nailer/Brad Nailer/Stapler Compressor Combo Kit Discount?

I'm very happy with my purchase of this kit. My dad does remodeling for a living and I've had alot of experience helping him out and using his expensive and professional tools so in general I'm difficult to please when it comes to tools, but I'm very happy with this purchase. I really like the fact that everything you need is included. I don't like having to go buy pieces in order to fit everything together. The only thing someone might need to go buy for this kit is a longer and maybe more durable air hose (this one works fine and is 25' long but stays curled up and doesn't actually stretch out to a full 25', probably more like a little under 20'.

When you are looking for a compressor, probably the number one complaint you are going to hear is that some of them are very loud. Well, I've used about ten on different job sites and at peoples houses helping them out and all of them have been loud. Some maybe slightly louder than others, but that just comes with the territory. An oil-less style compressor is always very loud. It doesn't bother me, but if I'm using a loud tool for an all day project I do like to wear ear plugs, and highly recommend it to others.

The compressor was easy to set up, worked just fine, has plenty of power, the controls are easy to use and shouldn't pose a problem to someone that hasn't used one before if they just read the manual quickly and is surprisingly light-weight. It fills up with air pretty quick too, so any of the guns it comes with you'll be able to do continuous work with without having to pause because the compressor is running out of air too fast. You might have this problem (as I've had before with other compressors) if you try to run a framing nail gun with this compressor. It could use up alot more air and you might have to wait to let it fill up, but it should have the power to shoot a framing nail gun with no trouble, which is something I like.

I have used all of the nail guns multiple times and they have performed flawlessly. I always shoot two or three practice nails into spare wood, adjust the depth on the gun to make sure it will get the nail or staple all the way sunk into the wood, and then I get to work. I've never had any of the guns jam and I've used probably 10000 nails on the 16 gauge gun and probably half as many on the brad nailer (judging by the number of boxes of nails I've purchased and used). I haven't had to do any maintenance on them or anything like that. I just blow them off before picking them up when I'm done with them. They don't feel quite as sturdy in my hand as some of the other brands that I've used but when I'm actually working with them, their performance is very good. The one problem I do have is that the little rubber tips on all of the guns are easy to knock off. If you don't store them carefully and are careful with them when using them you could easily knock them off. I don't like this because often I am using them for trim work, and that plastic is the only thing stopping the gun from putting dings in the trim as I'm putting it in. I've been able to keep track of mine so far, and have had to superglue one of them back on, but in my opinion, that's a small complaint for such an affordable set, and to be fair, it's a common problem. Probably the majority of the nail guns I've used over the years have had their rubber or plastic tips removed. With a little bit of care it's not that hard to keep track of them though, and I might be a little bit more picky about that than most.

In summary, I've owned the package for a year and a half and have been very happy with it. For a DIY type person this is more than enough power and doesn't break the bank, and I really like that. If I were in construction and used this kit every single day, I might would suggest a more heavy duty set, but I think this kit is an amazing deal for someone that is doing small home jobs or if you are like me and renovating your house.

I bought this combo pack in 2008 at a box store. I used it for various home-improvement projects, and found it a pleasure to work with... and then the compressor began to continuously leak air. (The three air tools all seem to be fine, including a heavily used stapler).

Seems ok quality for a few projects, but based on my experience, and other negative reviews here and on the compressor's page, don't expect the compressor to last.

1 star for the crummy compressor, 4 stars for the tools. The combo kit is still a good value for starting out.

NewAir AC12000E 12,000 BTU Portable Air Conditioner

The NewAir portable AC definitely works. Lots of cold air comes pouring out of this thing, but it may not be exactly what you're looking for. It's good for some things and not so good for others. Let me explain.

I have an office/media room on the top floor of my house. It's basically an attic/loft that gets pretty warm in the summer. Central air is pumped into the room, but not much air comes through the vents. My homeowner's association will not allow window AC units, so I thought this would be an excellent alternative. The unit is portable and the window exhaust vent is not noticeable from the outside. The unit looks nice and is sturdy. I like the remote control and the digital thermostat on the front of the unit. It rolls nicely on it's casters. Hooking up the hose and exhaust vent was easy. However, my expectations may have been too high.

First, the room is about 150-200 square feet. The unit is not able to cool the room down much at all. The room is tolerable if you're sitting with the unit pointed in your direction as you can feel the cool air. That's about as good as it got. Also, the hose and exhaust vent got really hot during operation. Not sure if the heat radiating out from it canceled out the AC, but it was noticeable. To the unit's credit, the room has a skylight that acts just like a magnifying glass, so I'm sure some of the heat in the room is the result of it. Plus, there are three other windows with only blinds pulled. Maybe putting some opaque curtains up would help keep the temp down.

Second, the unit is very loud. Even on the low setting the compressor fills the room with a loud buzzing sound. If I'm working at my computer with headphones on, it's not a problem. But if I'm trying to watch a movie or play video games on the TV it's downright impossible.

Needless to say, I'm a little disappointed with the unit. I spent almost $400 on this thing and it doesn't really work the way I wanted it to. There are a few tweeks I can make to the room to help it along, but I guess I'm just going to have to get used to it.

I have always used an evaporative cooler since I live in a low-humidity environment. It works really well unless it get over 96 and this year was especially warm so we decided to get an AC for the bedroom, the warmest room. I did lots of comparing, reviewing and trying to figure out exactly what would end up being the best value. I saw this product and it was something I hoped would work.

It came quickly. The company sends you the FedEx number so you can track it and know when to expect it. After opening it, I was glad we went portable instead of window unit. It looks pretty cool and isn't too huge. The thing for the exhaust in the window looks good when viewed from outside the house. The air comes out very cool and gives instant relief. It isn't loud. The remote is nice I didn't think we would use but we do. Not having to empty the water is a handy feature also.

I am really happy with this AC. :)

Buy NewAir AC12000E 12,000 BTU Portable Air Conditioner Now

I've been using this unit for about two weeks now. Delivery was ahead of schedule and the tracking information provided by the seller was definitely a plus. Package arrived in great shape with no dents or dings at all. The set up of the unit was easier than I expected it to be but I'm glad I read the directions completely before I started. Operating it is very user friendly although I haven't attempted to use the 'timer' feature. I just turn it on when I get home and turn it off when I leave. We've already had a few days pushing 90+ degrees with some high humidity and I haven't had to empty the back-up reservoir at all. The 'nano mist' technology must be working. Also, I haven't had the unit shut itself off due to the compressor over heating. Overall, I'm very pleased with it the only reason for the four star rating instead of five is because I expected more 'oomph' from a 12,000 BTU unit. I'm cooling a 10'x 12' room and although It definitely makes it comfortable (lowers and maintains the temperature to 72-75), I was expecting it to cool it down faster than it does and lower the temperature into the upper 60's at least.

Read Best Reviews of NewAir AC12000E 12,000 BTU Portable Air Conditioner Here

This 12,000 BTU unit works like a dream. It blows cold all day, is quiet, and given enough time, it actually cools most of my 1200 square foot house, which is far better than its rated cooling ability. Still, is is designed to be used as a room air conditioner. My only issue with it was the fact that the window kit wasn't quite large enough for my largest windows in the living room. But all it took was a call to the manufacturer, Amcor, and for $7 plus postage they sent me a second window kit to extend the first one. The result is perfect, exactly what I needed. A hard-working AC unit that can be moved from place to place if I want... or even used in my studio outbuilding. Highly versatile and extremely well made. Would recommend to anyone who doesn't have or want central air or window units. Finally, someone tagged this product as an evaporative cooler (swamp cooler) which it is NOT. It is a true air conditioner with a powerful compressor.

Want NewAir AC12000E 12,000 BTU Portable Air Conditioner Discount?

I just got this item delivered today. So yes, I've only used it for one day but so far, my review is as follows: It came very, very quickly. It was brand new in the box as stated. The unit is of great build quality and blows COLD air. For the reviewers who say it doesn't work and so on, it's possible they got a defective model but I'd say for the most part these people are not very intelligent. In a while I might be back if the thing breaks, but as of right now, this thing works beautifully. Quiet, cold, sturdy. For the money you can't ask for more. Oh yeah, and this is the SAME EXACT unit Sears sells for 369 but you have to pay tax and shipping on sears. This is an Amcor unit, New Air just rebadges it. Here's the link to the same unit Sears has: http://www.sears.com/shc/s/p_10153_12605_04210000000P

I'm picky about electronics and I don't usually buy cheaper off brand stuff but this one kicks butt and I have ZERO complaints. Thanks!

Save 30% Off

Stanley Bostitch N62FNK-2 15-Gauge 1 1/4-Inch to 2-1/2-Inch Angled Finish Nailer

• 1 1/4-inch to 2-1/2-inch 15-gauge oil-free angled finish nailer
• Tool-free removable and angled magazine; adjustable depth control; bypass nail pusher
• Durable, lightweight magnesium housing
• Includes no-mar tip, 4 profile tips, 1,000 fasteners, durable plastic carrying case
• 11.63-by-3.13-inches; extremely light 3.8-pounds; 7-year limited warranty

I bought this gun sight unseen (usually I go "touch" tools at the H--D---first, but they didn't have one) and am so far very pleased. When I took it out of the box, the first thing I noticed was how light it is. It's amazing. Here's my comments:

The nail magazine is plastic and the housing is magnesium making this thing feel like a toy in your hand. I'm still a little skeptical about the plastic magazine and wonder if it would withstand the daily pounding of professional use (I'm only a heavy duty homeowner).

The good:

The oil free engine is fantastic. No oil on your work and no need to remember to oil it.

Easy to use and maintain.

Pretty much jam free (I've shot plenty of nails through it already).

VERY light.

The bad:

Only shoots Stanley nails (PC and Senco shoot a different type of nail). Not a problem as I see it [One home improvement store] sells them in boxes of 5000 (PC sells their nails in boxes of 1000).

Plastic magazine Not sure how long it will last.

Buy Stanley Bostitch N62FNK-2 15-Gauge 1 1/4-Inch to 2-1/2-Inch Angled Finish Nailer Now

From the sound of these reviews, the gun seems to work pretty good for homeowners & such. I've been a carpenter for 40 years. I've been using finish nailers for about 20 years. My last nail gun was a Duo-fast. I finally retired it recently, after 17+ years of service. Since the local lumber yard carries Bostich nails, I went with Bostich. I've had the gun 18 months & the piston rod has broken 3 times. Replacing it myself still cost me $35.00 a pop. Anybody who has trimmed a door or window or installed baseboard, knows it's immpossible not to hit a screw head or sheetrock nail once in a while. Well, everytime I hit one, the piston rod breaks. It breaks in the exact same spot. It appears to made of cast aluminum or something, instead of hardened or stainless steel. I like the gun & am thinking about getting somebody to manufacture a functional rod for me, since Bostich doesn't know how.

Read Best Reviews of Stanley Bostitch N62FNK-2 15-Gauge 1 1/4-Inch to 2-1/2-Inch Angled Finish Nailer Here

I have been shopping for a 15 or 16 gauge finish nailer for about six months. This Bostitch is the only 15 gauge angled nailer that I have found to be priced in the straight 16 gauge price range.

This is the best 15 gauge gun at any price. Just hold this gun in your hand and you will be convinced that you can't buy a better gun, period.

I had narrowed my choices down to the Bostitch, Porter-Cable and the new DeWalt.

The PC was nice, the price was right and I have had great success with my PC 18 gauge brad nailer, but the 15 gauge PC was way too heavy. Almost twice the weight of the Bostitch.

The DeWalt fit my small hands like a glove, was very light weight and within my budget (if I stayed with the straight nailer vs the angled model). However, I shyed away from the DeWalt models because the contact trip assembly had too many bends which didn't seem to operate as smoothly as the PC and Bostitch. The display model at a local hardware store already looked like it was on the verge of having problems. I'm not hard on my tools, but one nasty bump, or a fall off of the workbench and you might be out of business.

Finally the Bostitch!

At less than 4 lbs. it's the lightest in it's class, yet still packs the biggest punch of them all! 400 in./lbs. It only weighs about 1 lb. more than by Porter-Cable brad nailer.

The finish and quality are second to none. It just plain ol' feels good in your hand. It's balanced so well it feels like an extension of your hand.

I am on a major budget (per the wife), but this gun is definitely worth every penny of the MSRP of $.... So why is it selling for only $...? Either A) it's a "typo", or B) Amazon and/or Bostitch has gone loco. Whatever the reason, my advice is buy this nailer before they discover that they are practically giving it away. I'm sure this gun will be the standard by which all other finish nailers will be measured against. You will not regret this purchase!

"TEN Stars....Final answer"!

Want Stanley Bostitch N62FNK-2 15-Gauge 1 1/4-Inch to 2-1/2-Inch Angled Finish Nailer Discount?

I am a cabinet maker, and have been for more then 20 years, I bought a new bostitch T-36 finish nailer in 1983, to this day that gun has never failed to work, it has never been to a shop for repairs, of any kind. And I am very demanding of my tools, but I also take real good care of them and I do all of my own maintenance on my tools. I bought the new N62FNK-2 a few months ago because of carpo tunnel in my hands, and I needed a lighter gun to work with. All I can say is it is the best finish nailer to date that I have ever used, some of the things I really like about the N62 is it has low recoil in my hands when I shoot a nail, and the weight of the gun, and the balance, it's just perfect. when I'm shooting face frames on cabinet boxes the rubber nose really helps to stabilize the gun. I also like the power that it has, I can shoot a 2 1/2" nail thru 2 1/4" of solid oak and counter sink it a 1/6" at only 80lbs of air, and at a low counter sink setting using a 25' hose, so just think what you could do at 100lbs of air and a heavy counter sink setting, big oak crown mouldings, casings, it's endless what you could do. And for those who say they can't find an asortment of nails for the N62, I can tell you I have not had any problem finding and buying 1" all the way up to 2 1/2" nails for my gun. For me, it's the only finish nailer to have, and over the years I have used alot of different finish nailers out there, because most of my friends are contractors to. So I will keep my T-36 for shop backup, but with my new N62FNK I don't think I will ever need to use it. Thank you bostitch, you have done real good with this one.

Save 59% Off

I am in the process of remodeling my "old" house. The walls are plaster which have become very brittle and delicate over the years. Hammering to install new molding was out of the question. I needed a gun that was light, powerful, easy to operate, and didn't require oiling so as not to make a mess in my home.

I purchased the Bostitch N62FNK-2 nailer (my first nailer) based on the customer reviews and manufacturer information. This gun is absolutely amazing! It delivered everything I wanted in a nailer. I saved money because I didn't damage any of the existing plaster walls, all nails held firmly the first shot...hammering would have been a nightmare!!

I was a little apprehensive about using a nail gun since I had never owned one before. It was so easy and so fast!! My only improvement idea would be that the manufacturer offer variety nail packs, so you don't have to buy such large quantities of only one size nail... BUT... Have No fear...Go for it...perhaps the best tool I have ever owned!