Campbell Hausfeld MP6000 Tire Inflator with Gauge

• Inflation gun, chuck, and gauge are all combined in one easy to use unit
• Clip-on design enables hands-free chuck use
• Built-in relief valve for reducing pressure in over-inflated tires
• Includes flexible hose for easier use
• Gauge has range of 10-150 psi

The problem is the lock-on chuck. The size and basic design make it hard (or not possable because of limited access) to use and it does not always lock on well. You spend time getting it on right.

For half the price there is a no-name brand version of this tire filler you can get here at Amazon or from Harbor Freight that has a compact clamp on chuck that is much easier to use and has no access issues. C-H chose the wrong chuck.

Buy Campbell Hausfeld MP6000 Tire Inflator with Gauge Now

This tire inflator is pretty neat. I got this because I had tires on some equipment where I needed a flexable hose to get to. My compressor uses type "M" fittings, so I had to buy a type "M" fitting in order to get it to connect to my compressor quick connects. Be sure you have what is needed before purchasing this item.

This thing was so easy to use, all I had to do is put the chuck on the tire stem and pull the lever on the chuck and I was ready to pump air pressure into the tire. I like the guage on this thing cause it tells me how much pressure is in the tire in real time! The guage will keep the pressure reading if you pull the chuck off the stem so if you want to write the pressure reading down on a piece of paper, then you can press a button on it to reset the guage!

It works really well and I am impressed with it, seems heavy duty and will last a long time! I think it was money well spent, just make sure you have the right fitting to attach it to your air compressor!

Read Best Reviews of Campbell Hausfeld MP6000 Tire Inflator with Gauge Here

The inflator works well push the chuck firmly onto the tire, and the guage shows the pressure. The trigger and air release buttons make it easy to get the right pressure, and I think that the guage is quite accurate. The only problem is that the spring-loaded clip that holds the chuck onto the valve stem of the tire can interfere with certain rims. The unit I received looks slightly different from the picture here. On mine, the lever for the chuck is mounted inward, that is, on the same side as the chuck air hole. Depending on how cramped the space around the valve stem is, you may not be able to release the lever with the chuck on the valve. To inflate the tires on my VW Passat, I had to flex the valve stem quite a bit to create the necessary clearance. Not a terminal problem, but one that could so easily be avoided by putting the lever on the back of the chuck, or as it is shown in the image here.

Want Campbell Hausfeld MP6000 Tire Inflator with Gauge Discount?

The gage could be better but it is OK. When cliped on to the tire stem, it does NOT always open the valve in teh stem all teh way and needs to be pushed on further and held by hand. There should be an adjustment for this but there are no instructions to tell you if or how you can make this adjustment.

Overlall it is OK

Save 63% Off

The chuck and clip design doesn't work on some of my tires; it won't go deep enough on the tire stem. I saw this mentioned in a few other reviews. Besides that, the spring in the clip slipped out yesterday and keeps popping out even after I disassembled/reassembled the clip there is no detent to hold the spring's "foot" on the metal base so it slips out repeatedly . I'm going to buy another inflator...

Rol-Air 1.5 HP, 1.5 Gallon Air Compressor FC1500HBP2

• Single stage pump with ball bearings
• Cast-Iron cylinder
• Stainless steel reed valves and splash lubrication ensure longer pump life
• Can Produce 3.5 CFM of Air

I am a remodeling contractor. I use a compressor a lot. I am very satisfied with this compressor. It is easily moved, not too heavy and has rubber feet so it won't damage floors. It obviously doesn't have a huge tank but its recovery time is VERY quick. It is quieter than an oil free compressor but not as quiet as some of the other oil filled ones I have seen. It runs a trim nailer no problem. I even use it for my framing nailer if I am just doing a couple walls. One more good thing....before I bought this I had a few technical questions. I called ROLAIRE and got a real person on the phone within seconds who was very knowledgeable about their products and compressors in general. He talked to me for several minutes and helped me decide this is the one I needed. I was impressed.

Buy Rol-Air 1.5 HP, 1.5 Gallon Air Compressor FC1500HBP2 Now

I purchased this to run my air guns on the job site and to replace air in my tires when they get low. It does both of these very well. It seems to be a very good balance between, weight, reliability and performance. The suction cups actually do work well to keep the unit from vibrating around. And as a bonus I am surprised at how quite it runs compared to my oiless compressor I replaced with this unit. Another reason I went with this brand was because it was the portable brand carried and recommended by my local compressor shop.

Read Best Reviews of Rol-Air 1.5 HP, 1.5 Gallon Air Compressor FC1500HBP2 Here

Pros: The unit arrived on time per the shipping information in good condition. Well designed unit with motor and compressor integrated within a cowl that directs the fan-driven cooling air. Well-manufactured too. Worked exactly right out of the box, plumbing components good quality and easy to hook up.

Cons: Pretty noisy. More so than I expected, based on reading previous reviews. However, I have only owned one other compressor and it was 50 years old when this one replaced it, so my frame of reference on noise is limited.

With this size tank, the unit comes on a lot. Also, the total weight of 39 lbs sounded light when I read the description. However, it is a heavier than other portable compressors. It is portable and not bad for moving from one place to the next, but not quite as convenient as I expected. If I had it to do over, I think I would get the next larger size tank to get more capacity at the expense of a couple of lbs. If portability was my main goal, I would look for a smaller, lighter unit.

Bottom Line I am satisfied with the small RolAir. It does what I need it do.

Want Rol-Air 1.5 HP, 1.5 Gallon Air Compressor FC1500HBP2 Discount?

Had it shipped twice , and twice it was covered with oil.. So i just clean it and start using.. Recharge super fast , doesn't take a lot of amps.. So good. Than compressor start to shut down any time it want's. Now my engine got stuck it can't even turn ,,

And i bought mine in April. Wasn't using it much just for some light trim work around the house. Please buy Dewalt one airless.. Or even Senco , there is one little one , works super great.

This compressor is overpriced and build cheep. Be aware..

Save 34% Off

This air compressor is very good. It is the highest output of air in its size that I could find, and it puts out more air than most of the 4 gallon compressors as well. The price I got was the $40 less than the best at Lowe's with half the air output. Very quiet machine respectively.

Customer service: the block on the pressure switch had a pin hole leak in the cat iron itself. I reached Acme Tools via Amazon to complain. Brian W. Replied back with the part number and shipped it free of charge, all within 2 min of sending the email. I'm absolutely serious. I sent the email, and received a reply with a picture diagram showing the part i needed before I put my phone down.

I haven't had this good an experience but a few times. I feel its adequate to express how good it was to get more people to deal with people who care.

1000 lb Hydraulic Motorcycle Bike Lift Table Jack Service Stand Shop Ramp Drop Panel

• No air compressor needed ; Hydraulic foot pedal allows a hands free operation without bending over
• Deluxe hydraulic ram will easily lift motorcycles up to 1000 lbs
• Motorcycle lift includes an oversize front tire clamp for extra security
• 24" Loading ramp, rubber wheels, drop out panel
• 13-1/2" x 19-1/2" rear tire drop panel is standard with TMS motorcycle lift units

This jack has the drawback of not allowing one person to load the motorcycle. The procedure does not have a kickstand rest or any way of balancing the bike while the tiedowns are put in place because there is no place to rest your feet to hold the bike upright. Hinged metal plates are needed to provide foot and kickstand support.

Buy 1000 lb Hydraulic Motorcycle Bike Lift Table Jack Service Stand Shop Ramp Drop Panel Now

got lift had broke off support piece (had to have it welded ) missing pieces. lift crashes down all at once . will not go down slowly ! VERY DANGEROUS ! manufacturer will not do anything .

Read Best Reviews of 1000 lb Hydraulic Motorcycle Bike Lift Table Jack Service Stand Shop Ramp Drop Panel Here

I recently purchased this lift for my home bike shop and am quite pleased with it. The lift was easy to assemble and seems well constructed. The height at full extension is sufficient and it should be able to handle any bike I would need to put on it. The only complaint I have is that it takes so many strokes on the hydraulic cylinder's foot pedal to raise the bed to full extension. I would give this product 4 stars.

Want 1000 lb Hydraulic Motorcycle Bike Lift Table Jack Service Stand Shop Ramp Drop Panel Discount?

I have been looking for a product like this for a long time. I have a very limited space (1 car garage)just the right size, stable & the right price. No more working on my knees, makes working on my bike/bikes more enjoyable.

Firestone WR17602178 Air-Rite Dual Electric Air Command Accessory Kit

• Dual white-face gauge and standard-duty compressor
• Ideal for light use on off-center loads
• Kit includes dual gauge, compressor, air line, fittings, filter and fasteners

This is a great product and was simple to install. Anyone could do it. Very nice to have the control to air up each bag seperately.

Buy Firestone WR17602178 Air-Rite Dual Electric Air Command Accessory Kit Now

PERFECT! THE INSTALL WAS RELATIVELY EASY AND IT WORKS LIKE A CHARM! MUCH MORE CONVENIENT THAN INFLATING AIR BAGS AT THE SERVICE STATION PLUS YOU CAN CHANGE PRESSURE IN THE AIR BAGS WHILE ON THE ROAD. GREAT PRODUCT.

Goldblatt G15604 Diana Gun Texture Sprayer

• Heavy duty one piece machined housing
• Easy toclean
• Able to spray up to 1/2-Inch aggregate with optional Stone Conversion Kit
• Machined texture tips for accurate pattern spray
• Requires a 30 cfm compressor

First time using this product...simple to use after getting the hang of it.... controlling over spray was an issue as with any spraygun...easy to clean....saved a lot of time and very little wasted stucco

Buy Goldblatt G15604 Diana Gun Texture Sprayer Now

I watched a you tube video of the Diana Goldblatt texture gun and they said it was made in Canada, must of been an old video because when i received it the box said made in China. The gun I received was a very poor casting and was not ground smooth before they applied the powder coating finish and resulted in very sharp bumps that would cut your hands when cleaning the gun. I like the design of the one piece casting and the functionality of the design, the trigger is really smooth, not like that piece of junk "Wallboard" gun I bought. I returned the Diana to Amazon and I am going to order the Diana gun again when they are back in stock and I hope I receive one with a quality finish, maybe this was just a bad batch, "Poor Quality Control". The hopper is small and really thin compared to the hopper that was on my Wallboard gun. I will keep you posted on the quality of the next one.

Read Best Reviews of Goldblatt G15604 Diana Gun Texture Sprayer Here

If you want to buy a quality hand hopper that will last forever,look no further!!!And you just cant beat amazon on the price or speed of shipping!!Even cheaper than the material warehouse I buy my stuff through,,GO FIGURE!!